OPMN Configuration Assistant Fails during Installation

Hi,
I am trying to install Oracle 10g 10.1.2 (Release 2) in Windows 2K platform, it fails in the installation with the message as "OPMN Configuration Assistant Fails" in the OUI installation wizard and does not proceed at the end of it.
Then when I try to goto console of opmn and do startall and find out the status, it gives the status as OHS down. ANy idea why this is happening ?
Regds,
Nagarajan K.

Hi Nagarajan!
When the OHS does not start most of the config assitants will fail. Often the failures occur due to a bad network configuration (check your hosts file), more than one network card or an already running process on that port (eg you already have an Apache running on this machine).
In the cfgtoollogs a detailled error should be reported in the installactions file.
cu
Andreas

Similar Messages

"Web Cache Configuration Assistant" failed during installation

Hi,
I'm trying to install Grid Control on Fedora Core 4 but it failes during the installation at the "Web Cache Configuration Assistant".
I already createt a loopback device on localhost.
Thanks for any surggestions!!
End output from spawned process.
Configuration assistant "Web Cache Configuration Assistant" failed
2
ORACLE_HOME is /opt/oracle/EM/10.1.0.3
Failed in smi manipulation().
TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
at oracle at oracle.ons.ONS.addSubscriber(ONS.java:333)
at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
at oracle.ons.Subscriber.<init>(Subscriber.java:80)
at oracle.ons.ONS.createNewSubscriber(ONS.java:687)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.ias.webcache.config.WebcacheConfig.smiSetup(WebcacheConfig.java:243)
at oracle.ias.webcache.config.WebcacheConfig.smiEnableWebcache(WebcacheConfig.java:215)
at oracle.ias.webcache.config.WebcacheConfig.enableConfiguration(WebcacheConfig.java:191)
at oracle.ias.webcache.config.WebcacheConfig.main(WebcacheConfig.java:66)
.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
cat /etc/hosts:
127.0.0.1 loopback localhost
127.0.0.1 fedora01 fedora01.barmenia.de localhost.localdomain localhost
172.xxx.xxx.xxx fedora01.barmenia.de fedora01 oracleinstall

hi,
i tried to reinstall but it is still the same problem.
before i started the installer there was no oracle process left
fedora01.oracle[emrep]>ps -x
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
PID TTY STAT TIME COMMAND
2976 pts/2 S 0:00 -ksh
17573 pts/2 R+ 0:00 ps -x
fedora01.oracle[emrep]>.1.0.3/Disk1/runInstaller PRE_REQUISITE=TRUE <
Starting Oracle Universal Installer...
before the assistant fails it looked like:
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
PID TTY STAT TIME COMMAND
2976 pts/2 S+ 0:00 -ksh
17588 pts/2 S 2:32 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17589 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17590 pts/2 S 0:26 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17591 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17592 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17593 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17594 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17595 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17596 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17597 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17598 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17600 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17601 pts/2 S 0:07 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17607 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
17677 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26185 ? Ss 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26301 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26381 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26409 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/bin/tnslsnr LISTENER -inherit
26669 pts/4 S 0:00 -ksh
26717 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26718 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26719 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26720 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26721 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26722 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26723 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26724 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26725 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26726 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26727 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26728 26729 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26730 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26731 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26732 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
26770 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26771 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26772 pts/2 S 0:01 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26773 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26774 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
26775 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26776 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26777 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26778 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26779 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26780 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26781 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26782 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26783 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26791 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26792 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26834 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
26835 pts/2 S 0:00 /bin/sh /opt/oracle/EM/10.1.0.3/opmn/bin/opmnctl stopall
26843 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -a -q shutdown
26844 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
I'm running out of ideas!!
thanks for your help!!!
daniel

SSO Configuration Assistant failed during installation of OCS 10G on linux

I am trying to install OCS 10g infrastructure on CentOS 4.2
the linux version which the installer displays is redhat-4
The installation works fine but the SSO CA fails and gives this message
NLS_LANG param = AMERICAN_AMERICA.AL32UTF8ERROR : Exception while configing SSO DAD :oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
     at oracle.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
     at oracle.ons.ONS.addSubscriber(ONS.java:336)
     at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
     at oracle.ons.Subscriber.<init>(Subscriber.java:80)
     at oracle.ons.ONS.createNewSubscriber(ONS.java:690)
     at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
     at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
     at oracle.webdb.config.smi.GeneralConfig.<init>(Unknown Source)
     at oracle.webdb.config.smi.GeneralDADConfig.<init>(Unknown Source)
     at oracle.webdb.config.smi.DADConfig904Imp.<init>(Unknown Source)
     at oracle.webdb.config.smi.ConfigFactory.getGeneralDADConfig(Unknown Source)
     at oracle.webdb.config.smi.ConfigFactory.getDADConfig904(Unknown Source)
     at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
     at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
     at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1493)
     at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
     at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
/home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-cp
/home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
oracle.sysman.emSDK.conf.TargetInstaller
deletetarget
oracle_sso_server
infra_inst.nufastserver.local.nu_Single Sign-On:orassogetASTargetInfo: oracleHome = "/home/oracle/product/10.1.2/ocs_1".
getASTargetInfo: iasName = "infra_inst.nufastserver.local.nu".
getASTargetInfo: iAS Target Type = "oracle_ias".
Setting the AS product version value in targets.xml to be "10.1.2.0.2".
Calling method getASTargetInfo.getASTargetInfo: StatusURL value = "http://nufastserver.local.nu:7777".
Retrieved SSO protocol, host, and port info from targets.xml.
The values are: "http://nufastserver.local.nu:7777".The following values will be used to configure the sso_server target entry in targets.xml.
Protocol: "http".
Hostname: "nufastserver.local.nu".
Port: "7777"./home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-cp
/home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
oracle.sysman.emSDK.conf.TargetInstaller
addtarget
/home/oracle/product/10.1.2/ocs_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
us Language us is already installed.
About to execute java call using emConfigInstall.jar.
Here are the arguments:
/home/oracle/product/10.1.2/ocs_1/jdk/bin/java
-DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
-jar
/home/oracle/product/10.1.2/ocs_1/jlib/emConfigInstall.jar
consolesn
/home/oracle/product/10.1.2/ocs_1/sso/conf/consoleConfigSNSegment.xml
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
I have checked thelog files but there is nothing in that.
in the hosts file I have given fully qualiifed name as "nufastserver.local.nu"
Can any bosy help me in this problem. I have tried reinstalling the OS also but the problem is still there at the same place

I had exactly the same poblem on a red hat 64bit OS on the infrastructure install.
But while trying to start opmn manually (that is definitely not to do to solve the problem). I had the error telling me that the shared library libdb.so.2 was not accessible.
I did add the compat-db-4xxxxx.i386.rpm and then retry the check. Then all passed threw.
To note that the .log file from the install says definitely nothing about this and that just trying to start the opmn did create another .log that gave me the file problem.
Hope it can help for 64bit linux OS installation.

OPMN Configuration Assistant Failed - During Midtier Installation

I'll try to make this short and sweet.
2 Boxes both running SLES9 Latest OCS Release (10.1.1.0.2 Sep 27).
By the book install. Have met all pre-install reqs.
Infra box installed okay. Very vanilla install except I opted for port ranges: web 7777, SSL 4443 etc.
Second Box , Midtier.(Apps Install) Trying to get a very vanilla install as well. Did not opt for port changes, took the defaults.
After about 40 minutes of the OPMN Config Assistant trying to start Webcache
and Wireless Notification engine, the installer finally times out and fails.
Logs indicate the following:
Webcache log -- ...Failed to assign port 80: permission denied...server could not initalize
OPMN/wireless_notif_eng_1003 log --Panama server notif..eng..1003 failed to initalize
ipm.log -- Process Crashed: OC4J~OC4J_imeeting~default_island~ Restarting
Even getting some indication of sql*net listener for email on port 25 failing because of permissions.
I was under the impression that the installation user id had rights to make high level changes. (I did get the prompt to run the root.sh)
I have the Metalink guys on this as well and its got them digging a bit deeper.
Does anyone have any ideas? What am I missing here?
Thanks in advance!
Paul

The Infra box install did give me a problem when I left the port selections to default (I did not use a portlist) i.e http=80, https=443, ldap 389, sldap 636. It refused to finish the install because it did not have rights to assign services to ports below 1024.
I thought that the Root.sh script took care of that issue (which has been confirmed by the Metalink folks) So I went with what some of the examples in the install guide had and used 7777 for http, 4443 for https, 3060 for ldap and 3131 for sldap. The Infra box then installed without a hitch.
I have met or exceed the hardware requirements for both boxes and have followed every detail regarding OS configs prior to install.
I am running into the same issue when installing the Apps box. Trying to take the defaults, no portlist file, just a plain default install.
I have double checked that no other services are running on these new boxes as I installed the OS with no bells or whistles. Very plain setup in other words.
My last chat with the Metalink guys seem to think there is a permissions issue and that SLES9 is not playing nice when executing the root.sh. script.
I am really flustered. Any ideas?

Database Configuration Assistant fails during installation Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

Agent Configuration Assistant failed during installation of Oracle 9i

Hi,
Currently having problem with installing Oracle 9i R2 (9.2.0.4) on Redhat. Am getting this error:
Parameter "orahome" = /apps/oracle/product/9.2.0.4/db_1
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Does anyone has a solution on this?
Thanks,
JayArr

Lets start with the basics. There is no such thing as Oracle 9i.
Yes I know Oracle years ago used it as a marketing label but to help you we need the exact version to 3 decimal places.
Either way the version you are just now installing is so old it will be unsupported? Why are you installing Neolithic software?
And finally ... What agent? What agent configuration? What does an agent have to do with a 9i installation on XP?
The more specific you are, and the clearer your description, the more likely you will get help. Though why you are installing something so old escapes me at the moment. <g>

Database Configuration Assistant Failed During 9i Installation

Database Configuration Assistant failed during my 9i Installation due to lack of disk space. I had 4MG allocated on /apps and the application used 3.1GB. I now do not have the required 1GB for the seed database. Actually, I want to create the seed database on /oradata, not on /apps. Does anyone know how I can create that seed database in /oradata? I don't believe I was prompted for where to create that seed database. Also, how can I run the Database Configuration Assistant again? Typing the command dbca told me to set the DISPLAY environment variable and re-run.
Thanks in advance for any help you can give.
Veronica

I had java.lang.NoClassDefFoundError too.
This was fixed by having DISPLAY setting
#export DISPLAY=host:0.0
Make sure your x window system is working Ok.
I also used unset LANG

Configuration Assistant FAILED during Oracle 10.2.0.1.0 g installation

The Configuration Assistant Failed during set up. Can someone tell me how to resolve this problem. My reading reveals that I can use the database, however, it may not function properly? What should I do?

OS?
Text of error message?

OPMN configuration assistant failed while applying patch on SOA 10.1.3.1

Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AM

Did you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail

OPMN configuration assistant fails on Install

We are installing B2B intergation and during the install the OPMN configuration Assistant Fails. The error description is
Error
--> Process (pid=2942)
failed to start a managed process after the maximum retry limit
Log:
/home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
The log shows:
06/05/17 14:56:49 Start process
May 17, 2006 2:56:51 PM: Starting B2B Engine -MTProd.helenab2b.helenachemical.com..
May 17, 2006 2:57:00 PM: There was an error starting B2B Engine -MTProd.helenab2b.helenachemical.com.
Any ideas how to proceed.. we are in the process of opening a TAR.
Thanks

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

Internet Directory configuration assistant failed while installation

Hi,
Internet Directory configuration assistant failed while installation of OID Apps infrastructure Identity management componenet installation for HA option Oracle AS cluster identity management.
Tue Apr 30 15:40:56 BST 2013 OID CA started.
Registering OID server..
SID: orcl
DB Host: DBHOST2
DB Version:10.1.0.5.0
create final wallet
Setting OID wallet permissions..
cmdline:0:/a01/OIDPRODZ/ldap/bin/oidsp.sh
Linux
Entering Ldap Post Installation Set File Permissions
Setting wallet file protections
Leaving Ldap Post Installation Set File Permissions
Stopping OID Server using OPMN..
Starting OID Server using OPMN..
Tue Apr 30 15:41:04 BST 2013 Bind request issued. Waiting for OID Server response.
with a retryCount:20
Tue Apr 30 15:41:34 BST 2013 Bind request issued. Waiting for OID Server response.
javax.naming.CommunicationException: APPHOST1.process.com:13060 [Root exception is java.net.ConnectException: Connection refused]
     at oracle.ldap.util.jndi.ConnectionUtil.returnInitialLdapContext(ConnectionUtil.java:491)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:134)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:156)
     at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:961)
     at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
     at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
     at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
     at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:124)
     at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
     at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:119)
     at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1668)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2599)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:290)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:133)
     at oracle.ldap.util.jndi.ConnectionThread.run(ConnectionThread.java:61)
Any suggestion ?
Thanks

Hi,
Thank you for the replay.
#cat /etc/hosts
# device defined for TCP in your /etc/net file. It may also contain
# entries for well-known (reserved) names such as timeserver
# and printserver as well as any other host name and address.
# The format of this file is:
# Internet Address Hostname # Comments
# Items are separated by any number of blanks and/or tabs. A '#'
# indicates the beginning of a comment; characters up to the end of the
# line are not interpreted by routines which search this file. Blank
# lines are allowed.
# Internet Address Hostname # Comments
# 192.9.200.1 net0sample # ethernet name/address
# 128.100.0.1 token0sample # token ring name/address
# 10.2.0.2 x25sample # x.25 name/address
127.0.0.1 loopback localhost # loopback (lo0) name/address
192.168.107.205 NSEL-CHN-S05 myserver.com
#netstat -a |grep 13062
(no output)
In my knowledge these are the patches required.
Patches
1)IY70159 : KRTL relocation problem
2)IY66513 : Parsing of LDR_CNTRL value fails
3)IY68989 : write to mmapped space hangs
I checked like this,
# instfix -i -k IY70159
All filesets for IY70159 were found.
# instfix -i -k IY66513
All filesets for IY66513 were found.
# instfix -i -k IY68989
All filesets for IY68989 were found.
Regards,
Mat.

OC4J Instance Configuration Assistant Failed during SSO install

Hi,
I am building a Oracle Portal on Linux Server, at step of SSO installation i reached an error *"OC4J Instance Configuration Assistant Failed"* .
In the log file i found that :
Calling updateConfig to notify DCM of new deployments...done.
Adding OC4J mount points for application 'wirelesssso'...done.
Adding OC4J mount points for application 'oiddas'...done.
Adding dependent libraries for application 'sso'...done.
Adding OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'wirelesssso-web' to default-web-site for application 'wirelesssso' in OC4J instance 'OC4J_SECURITY'
Web app 'wirelesssso-web' bound successfully.
Binding web app 'ui' to default-web-site for application 'oiddas' in OC4J instance 'OC4J_SECURITY'
Web app 'ui' bound successfully.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: RMIConnection Disconnected
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
     ... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: RMIConnection Disconnected
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.bindWebApp(Unknown Source)
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
     ... 9 more
Calling updateConfig to notify DCM of new web-bindings...done.
Adding application 'wirelesssso' to the DCM repository...done.
Application 'wirelesssso' deployed successfully.
Adding application 'oiddas' to the DCM repository...done.
Application 'oiddas' deployed successfully.
Undeploying application 'sso' from OC4J instance 'OC4J_SECURITY'.
java.lang.reflect.InvocationTargetException
FAILED!
ERROR: Caught exception while undeploying 'sso' from 'OC4J_SECURITY':
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: IOException communicating with the remote server: Connection reset
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2508)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2361)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
     ... 8 more
Removing OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Calling updateConfig to notify DCM of undeployments...done.
Stopping OC4J instance 'OC4J_SECURITY'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /u01/oracle/OraHome_1/j2ee/deploy.ini to /u01/oracle/OraHome_1/j2ee/deploy.ini.1342977480035.bak.
Writing any undeployed entries back to /u01/oracle/OraHome_1/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
Can any one solve it.
Thanks very much!

Use physical disks, not NFS mounts. But you are still restricted to a 10.2 database max. SSO won't install in an 11g database with the repca tools from IDM 10.1.2 and 10.1.4.

Oracle Net Configuration Assistant failed during installtion ..

Hello,
I have installed oracle 11g on windows 7 enterprise editions..64 bit..
During installtion i am gettign
[INS-20802] Oracle Net Configuration Assistant failed. meaasge
INFO: Error: Environmental error detected: Oracle Home is set to "C:\app\oracle\product\11.2.0\dbhome_3\" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
INFO: Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
I removed all environemnt variable from system related to oracle home..
But i have analother oracle installtion on same box under "C:\app\oracle\product\11.2.0\dbhome_3\" ...
we have oracle key entries in regedit of windows..but i can not remove that..
IS new installtion is refering to old home..?
Any idea how to correct it ...

Abdelhadi_DBA wrote:
Hi osama,
Q1:What does implied that oracle database version is not vertified for OS?Oracle certifies its software on various OS versions - this certification ensures that the Oracle software will work as advertised on the various OS's that have been certified. If a specific software is not certified on a specific OS, that the software may or may not work as advertised, and Oracle will not help in troubleshooting or fixing any errors.
Q2 Can you please give us the liste of OS supported by oracle ?
Thank you in advance.Pl see the Install Docs for the certified OS versions
11gR1 - http://tahiti.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
11gR2 - http://tahiti.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
for example - 11gR1 on Windows - http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
HTH
Srini

Oracle Net configuration assitant Failed during installation

Hi, all
I was running oracle database 11.2.0 on windows xp service pack 3
I deinstalled it and reinstalled again.
everything wet well until it reached to configure Net configuration assistant which was failed to start.
Now i can not start Net configuration assistant as well as can not create listener with lsnrctl commandline utillity. all the time i tried to create a listener it does not create.
I tried to start net configuration assistant from programe list in windows it is not starting. while installation it generated a log file the enteries related to net configuration are as follows . Please note that i have installed java 1.7.0 on my machine
and also i can not start dbcontrol and there is no mention of dbcontrol in program list too.
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO:
INFO: Parsing command line arguments:
INFO:     Parameter "orahome" = D:\app\oracle\product\11.2.0\dbhome_1
INFO:     Parameter "orahnam" = OraDb11g_home1
INFO:     Parameter "instype" = typical
INFO:     Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO:     Parameter "insprtcl" = tcp,nmp
INFO:     Parameter "cfg" = local
INFO:     Parameter "authadp" = NO_VALUE
INFO:     Parameter "responsefile" = D:\app\oracle\product\11.2.0\dbhome_1\network\install\netca_typ.rsp
INFO:     Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0b2d98ca, pid=144, tid=4064
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b03 mixed mode)
INFO: # Problematic frame:
INFO: # C [oranl11.dll+0x498ca]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid144.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
any solution

It seems you have a problematic java frame (perhaps bug) and need to check out the reason in the hs_err_pid144.log file.

Agent Configuration Assistant Failed during install

At the end of Oracle 9i installation, the Agent Configuration Assistant failed with
Parameter"orahome"=/opt/oracle/product/9.2.0
Parameter"nodeinfo"=NO_VALUE
I'm installing Oracle 9i on a Sun sparc ultra 10 with 1 gig of RAM running Solaris 9.
Any help is much appreciated,
Lucas

Thanks for the prompt reply, Joel. I did follow the install instruction. My /etc/system consists of:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmni=100
set noexec_user_stack = 1
set noexec_user_stack_log = 1
set sys:coredumpsize = 0
My .profile consists of:
ORACLE_BASE=/opt/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
ORACLE_SID=solaris; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
TNS_ADMIN=/export/home/oracle/config/9.2.0; export TNS_ADMIN
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data; export ORA_NLS33
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/openwin/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/dt/lib:/usr/ucblib:/usr/local/lib
export LD_LIBRARY_PATH
# Set up the search paths:
PATH=$PATH:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/local/bin::/opt/NSCPnav/bin:$ORACLE_HOME/bin:/usr/ccs/bin:/opt/local/GNU/bin:/usr/local/samba/bin:/usr/ucb:.
export PATH
# CLASSPATH must include the following JRE location(s):
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib

OPMN Configuration Assistant Fails during Installation

Similar Messages

Maybe you are looking for