OPMN configuration assistant fails on Install
We are installing B2B intergation and during the install the OPMN configuration Assistant Fails. The error description is
Error
--> Process (pid=2942)
failed to start a managed process after the maximum retry limit
Log:
/home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
The log shows:
06/05/17 14:56:49 Start process
May 17, 2006 2:56:51 PM: Starting B2B Engine -MTProd.helenab2b.helenachemical.com..
May 17, 2006 2:57:00 PM: There was an error starting B2B Engine -MTProd.helenab2b.helenachemical.com.
Any ideas how to proceed.. we are in the process of opening a TAR.
Thanks
Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng
Similar Messages
-
OPMN Configuration Assistant Fails during Installation
Hi,
I am trying to install Oracle 10g 10.1.2 (Release 2) in Windows 2K platform, it fails in the installation with the message as "OPMN Configuration Assistant Fails" in the OUI installation wizard and does not proceed at the end of it.
Then when I try to goto console of opmn and do startall and find out the status, it gives the status as OHS down. ANy idea why this is happening ?
Regds,
Nagarajan K.Hi Nagarajan!
When the OHS does not start most of the config assitants will fail. Often the failures occur due to a bad network configuration (check your hosts file), more than one network card or an already running process on that port (eg you already have an Apache running on this machine).
In the cfgtoollogs a detailled error should be reported in the installactions file.
cu
Andreas -
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail -
Agent Configuration Assistant fails on install of oracle 9.2.0.4 Database Enterprises Edition On Linux AS 4
Parameter "orahome" = /home/oracle/OraHome1
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
System Configuration 512RAM 40 GB HDD 3.0 GHz
/etc/hosts File Specification
127.0.0.1 rd.hp.com rd localhost.localdomain localhostYou can to verify if you have a problem with the firewall. Run the next comands
Execute CMD and run
telnet hostname XXXX ------------> where XXXX is the AGENT PORT . This port its configure in the emd.properties file. This file is in the AGENT_DIRECTORY\sysman\config\
If you dont execute a telnet to this port, you have a firewall problem
Regards -
Net configuration assistant fail on install under linux
Hi,
after a crash of our server. I tried to install oracle 9i release 2. Everything is working, but on install die net configuration assistant failed. How can I start it up after install? The database is already created by the installer.
thanks a lot,
Remco PloegYour locales are cooked. Use dpkg-reconfigure locales, select your local language (both en_US versions for me), C as your default, and you should be set.
-
Oracle Net Configuration Assistant failed Error - installing Oracel 11g
Hi
I am getting the following error while installing Oracle 11g database.Could you please tell me what can be the issue.I tried it two times by cleaning up but still the same error.
utput generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call C:\Installed_Software\product\11.1.0\db_1/bin/netca.bat /orahome C:\Installed_Software\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\Installed_Software\product\11.1.0\db_1\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = C:\Installed_Software\product\11.1.0\db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = C:\Installed_Software\product\11.1.0\db_1\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c342849, pid=4284, tid=5436
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [MSVCR71.dll+0x2849]
# An error report file with more information is saved as hs_err_pid4284.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Configuration assistant "Oracle Net Configuration Assistant" failed
The "C:\Installed_Software\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call C:\Installed_Software\product\11.1.0\db_1/bin/netca.bat /orahome C:\Installed_Software\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\Installed_Software\product\11.1.0\db_1\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = C:\Installed_Software\product\11.1.0\db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = C:\Installed_Software\product\11.1.0\db_1\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c342849, pid=4076, tid=4048
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [MSVCR71.dll+0x2849]
# An error report file with more information is saved as hs_err_pid4076.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Configuration assistant "Oracle Net Configuration Assistant" failed
The "C:\Installed_Software\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Thanks
PraveenaHi
I installed JDK 1.5 and tried installing again. It failed again at the same point.
I ran netca.bat file individually. It gave the below error in the command line.And I am pasting the log also here. It looks like something to do with my JDK.
Could you please tell me what can be the problem.
===========================================================================
C:\Installed_Software\product\11.1.0\db_1\BIN>netca.bat
IOException: Can not save NetProperties: C:\Installed_Software\product\11.1.0\db
_1\network\tools\NetProperties (Access is denied)
Oracle Net Services Configuration:
C:\Installed_Software\product\11.1.0\db_1\network\admin\sqlnet0902066AM5338.bak
(Access is denied)
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c342849, pid=324, tid=772
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [MSVCR71.dll+0x2849]
# An error report file with more information is saved as C:\Users\praveena\AppDa
ta\Local\Temp\hs_err_pid324.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
C:\Installed_Software\product\11.1.0\db_1\BIN>
====================================================================
hs_err_pid324.log
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c342849, pid=324, tid=772
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C [MSVCR71.dll+0x2849]
--------------- T H R E A D ---------------
Current thread (0x0013bef0): JavaThread "main" [_thread_in_native, id=772]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
Registers:
EAX=0x00002e2e, EBX=0x2e2e2e2e, ECX=0x0d5e8c70, EDX=0x00000000
ESP=0x0006f848, EBP=0x0006f990, ESI=0x07d85f48, EDI=0x0013bef0
EIP=0x7c342849, EFLAGS=0x00210206
Top of Stack: (sp=0x0006f848)
0x0006f848: 07d85f48 0013bef0 07d85f48 626da08c
0x0006f858: 00000000 0000002e 61636f6c 736f686c
0x0006f868: 00130074 0013cbdc 0006f82c 0006f850
0x0006f878: 00000002 00000008 00000000 0006f8fc
0x0006f888: 6d815daa 0006f8ec 0013cbe0 6d8c3174
0x0006f898: 6d8c3270 0013cbdc 0013cbf4 6d815d4e
0x0006f8a8: 0013cbd8 0013bef0 0006f988 6d8748d8
0x0006f8b8: 0013c8c8 6d74d68d 00000001 0000000c
Instructions: (pc=0x7c342849)
0x7c342839: 00 00 00 75 eb 0b d8 57 8b c3 c1 e3 10 56 0b d8
0x7c342849: 8b 0a bf ff fe fe 7e 8b c1 8b f7 33 cb 03 f0 03
Stack: [0x00030000,0x00070000), sp=0x0006f848, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [MSVCR71.dll+0x2849]
j oracle.net.common.NetGetEnv.getDNSDomain()Ljava/lang/String;+0
j oracle.net.ca.ConfigureProfile.setDefaultProfileParams()V+0
j oracle.net.ca.InitialSetup.setupConfigObjects()V+204
j oracle.net.ca.InitialSetup.<init>([Ljava/lang/String;)V+879
j oracle.net.ca.NetCA.main([Ljava/lang/String;)V+676
v ~StubRoutines::call_stub
V [jvm.dll+0x871a8]
V [jvm.dll+0xdf462]
V [jvm.dll+0x87079]
V [jvm.dll+0x8e0d5]
C [java.exe+0x14c5]
C [java.exe+0x69cd]
C [kernel32.dll+0x44911]
C [ntdll.dll+0x3e4b6]
C [ntdll.dll+0x3e489]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.net.common.NetGetEnv.getDNSDomain()Ljava/lang/String;+0
j oracle.net.ca.ConfigureProfile.setDefaultProfileParams()V+0
j oracle.net.ca.InitialSetup.setupConfigObjects()V+204
j oracle.net.ca.InitialSetup.<init>([Ljava/lang/String;)V+879
j oracle.net.ca.NetCA.main([Ljava/lang/String;)V+676
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x01a52730 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2192]
0x01a54d90 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4208]
0x01a525a8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2424]
0x01a467c8 JavaThread "Finalizer" daemon [_thread_blocked, id=1392]
0x01a45180 JavaThread "Reference Handler" daemon [_thread_blocked, id=4784]
=>0x0013bef0 JavaThread "main" [_thread_in_native, id=772]
Other Threads:
0x01a428f8 VMThread [id=1244]
0x0013fb98 WatcherThread [id=5392]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 273K [0x03a70000, 0x03b10000, 0x03f50000)
eden space 512K, 40% used [0x03a70000, 0x03aa4510, 0x03af0000)
from space 64K, 100% used [0x03b00000, 0x03b10000, 0x03b10000)
to space 64K, 0% used [0x03af0000, 0x03af0000, 0x03b00000)
tenured generation total 1408K, used 946K [0x03f50000, 0x040b0000, 0x07a70000)
the space 1408K, 67% used [0x03f50000, 0x0403c8a8, 0x0403ca00, 0x040b0000)
compacting perm gen total 8192K, used 7599K [0x07a70000, 0x08270000, 0x0ba70000)
the space 8192K, 92% used [0x07a70000, 0x081dbd58, 0x081dbe00, 0x08270000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040d000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\java.exe
0x76f50000 - 0x77077000 C:\Windows\system32\ntdll.dll
0x760f0000 - 0x761cb000 C:\Windows\system32\kernel32.dll
0x75a60000 - 0x75b26000 C:\Windows\system32\ADVAPI32.dll
0x770e0000 - 0x771a3000 C:\Windows\system32\RPCRT4.dll
0x75f10000 - 0x75fba000 C:\Windows\system32\MSVCRT.dll
0x6d740000 - 0x6d8dd000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\client\jvm.dll
0x76320000 - 0x763bd000 C:\Windows\system32\USER32.dll
0x757e0000 - 0x7582b000 C:\Windows\system32\GDI32.dll
0x73d90000 - 0x73dc2000 C:\Windows\system32\WINMM.dll
0x75cf0000 - 0x75e34000 C:\Windows\system32\ole32.dll
0x75940000 - 0x759cd000 C:\Windows\system32\OLEAUT32.dll
0x73d50000 - 0x73d89000 C:\Windows\system32\OLEACC.dll
0x758c0000 - 0x758de000 C:\Windows\system32\IMM32.DLL
0x75e40000 - 0x75f08000 C:\Windows\system32\MSCTF.dll
0x75600000 - 0x7562c000 C:\Windows\system32\apphelp.dll
0x757d0000 - 0x757d9000 C:\Windows\system32\LPK.DLL
0x75830000 - 0x758ad000 C:\Windows\system32\USP10.dll
0x6d300000 - 0x6d308000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\hpi.dll
0x757c0000 - 0x757c7000 C:\Windows\system32\PSAPI.DLL
0x6d710000 - 0x6d71c000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\verify.dll
0x6d380000 - 0x6d39d000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\java.dll
0x6d730000 - 0x6d73f000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\zip.dll
0x6d070000 - 0x6d1da000 C:\Installed_Software\product\11.1.0\db_1\jdk\jre\bin\awt.dll
0x722d0000 - 0x72312000 C:\Windows\system32\WINSPOOL.DRV
0x626d0000 - 0x626e6000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranjni11.dll
0x62740000 - 0x627a3000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranl11.dll
0x60960000 - 0x60d32000 C:\Installed_Software\product\11.1.0\db_1\BIN\oran11.dll
0x62670000 - 0x6268b000 C:\Installed_Software\product\11.1.0\db_1\BIN\orancrypt11.dll
0x60870000 - 0x6095b000 C:\Installed_Software\product\11.1.0\db_1\BIN\oracore11.dll
0x0c290000 - 0x0c35e000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranls11.dll
0x63690000 - 0x636a8000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraunls11.dll
0x7c340000 - 0x7c396000 C:\Windows\system32\MSVCR71.dll
0x60eb0000 - 0x60eb7000 C:\Installed_Software\product\11.1.0\db_1\BIN\orauts.dll
0x762f0000 - 0x7631d000 C:\Windows\system32\WS2_32.dll
0x770d0000 - 0x770d6000 C:\Windows\system32\NSI.dll
0x62920000 - 0x6296d000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranro11.dll
0x62530000 - 0x6266d000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraldapclnt11.dll
0x627f0000 - 0x62905000 C:\Installed_Software\product\11.1.0\db_1\BIN\orannzsbb11.dll
0x60000000 - 0x60133000 C:\Installed_Software\product\11.1.0\db_1\BIN\orazt11.dll
0x72e00000 - 0x72e07000 C:\Windows\system32\WSOCK32.dll
0x75030000 - 0x75049000 C:\Windows\system32\iphlpapi.dll
0x74ff0000 - 0x75025000 C:\Windows\system32\dhcpcsvc.DLL
0x752a0000 - 0x752cc000 C:\Windows\system32\DNSAPI.dll
0x75660000 - 0x75674000 C:\Windows\system32\Secur32.dll
0x74fe0000 - 0x74fe7000 C:\Windows\system32\WINNSI.DLL
0x74fb0000 - 0x74fd1000 C:\Windows\system32\dhcpcsvc6.DLL
0x0c360000 - 0x0ce27000 C:\Installed_Software\product\11.1.0\db_1\BIN\orageneric11.dll
0x63430000 - 0x6345d000 C:\Installed_Software\product\11.1.0\db_1\BIN\orasnls11.dll
0x60fa0000 - 0x61158000 C:\Installed_Software\product\11.1.0\db_1\BIN\oracommon11.dll
0x61c20000 - 0x61f81000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraclient11.dll
0x636b0000 - 0x636b6000 C:\Installed_Software\product\11.1.0\db_1\BIN\oravsn11.dll
0x0ce30000 - 0x0d20a000 C:\Installed_Software\product\11.1.0\db_1\BIN\orapls11.dll
0x63420000 - 0x63429000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraslax11.dll
0x63080000 - 0x63296000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraplp11.dll
0x63520000 - 0x635c2000 C:\Installed_Software\product\11.1.0\db_1\BIN\orasql11.dll
0x10000000 - 0x1025c000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraxml11.dll
0x71ba0000 - 0x71bb1000 C:\Windows\system32\MSVCIRT.dll
0x62980000 - 0x629b1000 C:\Installed_Software\product\11.1.0\db_1\BIN\orantcp11.dll
0x0d210000 - 0x0d2bd000 C:\Installed_Software\product\11.1.0\db_1\BIN\orahasgen11.dll
0x62ab0000 - 0x62b2f000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraocr11.dll
0x0c1e0000 - 0x0c23e000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraocrb11.dll
0x754c0000 - 0x75535000 C:\Windows\system32\NETAPI32.dll
0x6f710000 - 0x6f7ec000 C:\Windows\system32\dbghelp.dll
0x76440000 - 0x76f4f000 C:\Windows\system32\SHELL32.dll
0x758e0000 - 0x75938000 C:\Windows\system32\SHLWAPI.dll
0x0d2c0000 - 0x0d307000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranldap11.dll
0x626b0000 - 0x626b9000 C:\Installed_Software\product\11.1.0\db_1\BIN\oranhost11.dll
0x00120000 - 0x00126000 C:\Installed_Software\product\11.1.0\db_1\BIN\orancds11.dll
0x629c0000 - 0x629cd000 C:\Installed_Software\product\11.1.0\db_1\BIN\orantns11.dll
0x0d310000 - 0x0d390000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraztkg11.dll
0x74520000 - 0x746be000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6001.18000_none_5cdbaa5a083979cc\comctl32.dll
0x01940000 - 0x0195b000 C:\Installed_Software\product\11.1.0\db_1\oui\lib\win32\oraInstaller.dll
0x74e60000 - 0x74e68000 C:\Windows\system32\VERSION.dll
0x0d420000 - 0x0d476000 C:\Installed_Software\product\11.1.0\db_1\oui\lib\win32\msvcr71.dll
0x0c240000 - 0x0c247000 C:\Installed_Software\product\11.1.0\db_1\oui\lib\win32\orauts.dll
0x0c250000 - 0x0c258000 C:\Installed_Software\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll
0x635d0000 - 0x635ed000 C:\Installed_Software\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll
0x0d8d0000 - 0x0da08000 C:\Installed_Software\product\11.1.0\db_1\BIN\oraldapjclnt11.dll
0x748f0000 - 0x748ff000 C:\Windows\system32\NLAapi.dll
0x71e80000 - 0x71e8f000 C:\Windows\system32\napinsp.dll
0x71e40000 - 0x71e52000 C:\Windows\system32\pnrpnsp.dll
0x74df0000 - 0x74e2b000 C:\Windows\System32\mswsock.dll
0x71e70000 - 0x71e78000 C:\Windows\System32\winrnr.dll
0x762a0000 - 0x762ea000 C:\Windows\system32\WLDAP32.dll
0x71e60000 - 0x71e6c000 C:\Windows\system32\wshbth.dll
0x75b30000 - 0x75cba000 C:\Windows\system32\SETUPAPI.dll
0x74e50000 - 0x74e55000 C:\Windows\System32\wship6.dll
VM Arguments:
jvm_args: -Dsun.java2d.noddraw=true -Dice.pilots.html4.ignoreNonGenericFonts=true
java_command: oracle.net.ca.NetCA
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=C:\Installed_Software\product\11.1.0\db_1\network\jlib\netcam.jar;C:\Installed_Software\product\11.1.0\db_1\network\jlib\netca.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\jndi.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\netcfg.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\ldapjclnt9.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\ldapjclnt11.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\;C:\Installed_Software\product\11.1.0\db_1\jlib\ewt3.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\help4.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\jewt4.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\oracle_ice.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\share.jar;C:\Installed_Software\product\11.1.0\db_1\jdk\jre\lib\rt.jar;C:\Installed_Software\product\11.1.0\db_1\jdk\jre\lib\i18n.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\ewtcompat-3_3_15.jar;C:\Installed_Software\product\11.1.0\db_1\network\tools;C:\Installed_Software\product\11.1.0\db_1\jlib\srvm.jar;C:\Installed_Software\product\11.1.0\db_1\jlib\srvmhas.jar;C:\Installed_Software\product\11.1.0\db_1\oui\jlib\OraInstaller.jar;C:\Installed_Software\product\11.1.0\db_1\lib\xmlparserv2.jar;C:\Installed_Software\product\11.1.0\db_1\emdw\lib\emca.jar
PATH=C:\Installed_Software\product\11.1.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Java\jdk1.5.0_17
USERNAME=praveena
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows Vista Build 6001 Service Pack 1
CPU:total 2 (cores per cpu 2, threads per core 1) family 6 model 15 stepping 13, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2097151k(1328884k free), swap 4194303k(4194303k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_11-b03) for windows-x86, built on Dec 15 2006 01:16:12 by "java_re" with MS VC++ 6.0 -
Agent Configuration Assistant Failed during install
At the end of Oracle 9i installation, the Agent Configuration Assistant failed with
Parameter"orahome"=/opt/oracle/product/9.2.0
Parameter"nodeinfo"=NO_VALUE
I'm installing Oracle 9i on a Sun sparc ultra 10 with 1 gig of RAM running Solaris 9.
Any help is much appreciated,
LucasThanks for the prompt reply, Joel. I did follow the install instruction. My /etc/system consists of:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmni=100
set noexec_user_stack = 1
set noexec_user_stack_log = 1
set sys:coredumpsize = 0
My .profile consists of:
ORACLE_BASE=/opt/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
ORACLE_SID=solaris; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
TNS_ADMIN=/export/home/oracle/config/9.2.0; export TNS_ADMIN
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data; export ORA_NLS33
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/openwin/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/dt/lib:/usr/ucblib:/usr/local/lib
export LD_LIBRARY_PATH
# Set up the search paths:
PATH=$PATH:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/local/bin::/opt/NSCPnav/bin:$ORACLE_HOME/bin:/usr/ccs/bin:/opt/local/GNU/bin:/usr/local/samba/bin:/usr/ucb:.
export PATH
# CLASSPATH must include the following JRE location(s):
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib -
OMS configuration assistant failed during install OEM 10gR2
I'm installing OEM Grid control 10g R2 using new database. Everything ran smoothly till OMS configuration assistant was kicked off. All other configuration tools ran before this one were succeeded.
When OMS configuration tool started, it hung there for a long time, so I "stop" and "retry" it, got message in detail box" /usr/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same."
In "configToolFailedCommands" file, showing "oracle.sysman.emcp.agent.AgentPlugIn".
I tried to "stop" and "retry", machine was frozen. What can I do now?
Please help. I'm stuck here.
Thanks in advance!The configuration failed again.
I stopped 9i listener (we have 9i dbs on same server) then ran OMS configuration tool from command line like this:
cd /usr/oracle/OracleHomes/oms10g/oui/bin
./runConfig.sh ORACLE_HOME=/usr/oracle/OracleHomes/oms10g ACTION=Configure MODE=PerformPerform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /usr/oracle/OracleHomes/oms10g/cfgtoollogs/oui/configActions2007-05-15_01-50-02-PM.log
The content of above log is: ###################################################
The action configuration is performing
The plug-in OMS Configuration is running
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Unlocking Passwords and Out of Box setup is in progress.
The plug-in OMS Configuration has failed its perform method
The action configuration has failed its perform method
Since it failed, I checked <OMS_HOME>/cfgtoollogs/cfgfw/oracle.sysman.top.oms_<Timestamp>.log, saw the following:
WARNING: oracle.sysman.top.oms:getConnection::Connection refused://astham:1521/oemtest:Exception=Io exception: The Network Adapter could not establish the connection
INFO: oracle.sysman.top.oms:Failed to connect to Database for:SYS, sysPwd=******, connectString=//astham:1521/oemtest. ConnectException=Io exception: The Network Adapter could not establish the connection
WARNING: oracle.sysman.top.oms:Failed to initialize JDBC Connection
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on
an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
IN THIS CASE, WHAT CAUSED THE FAILURE? HOW TO FIX? PLEASE ADVISE! THANKS!!! -
Database Configuration Assistant fails during instalation of Oracle EE 8.1.7
My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andresome good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny -
Java Security Configuration Assistant fails to install
Hello,
I have a problem because Oracle Application Server 10g for Windows doesnt install. I have tried several times on various systems, but every time I have the same error when the installer comes to the "Java Security Configuration Assistant"
The command being spawned is:
C:\oracle2\product\10.1.0\Db_1/jdk/bin/javaw -Djava.net.preferIPv4Stack=true -classpath C:\oracle2\product\10.1.0\Db_1\dcm\lib\dcm.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\jazn.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\lib\jaas.jar;C:\oracle2\product\10.1.0\Db_1\j2ee\home\oc4j.jar;C:\oracle2\product\10.1.0\Db_1\jlib\ojmisc.jar -Doracle.security.jazn.config=C:\oracle2\product\10.1.0\Db_1\j2ee\home\jazn\install\jazn.xml oracle.security.jazn.util.JAZNInstallHelper -log C:\oracle2\product\10.1.0\Db_1\cfgtoollogs\jaznca.log -realm jazn.com -user admin -oldpwd welcome -newpwd 05f2d5c792fb24147255fbe8169f54594b -oh C:\oracle2\product\10.1.0\Db_1 -clearpwd false
Only the first parameter is interesting :
C:\oracle2\product\10.1.0\Db_1/jdk/bin/javaw
It has a mixture of slahes (/) and backslashes (\), the first half C:\oracle2\product\10.1.0\ is ok but the second half Db_1/jdk/bin/javaw is not compatible with windows (slahes are for unix path only), so it obviously doesnt work because this path with a mixture of / and \ is not correct. At this point, the installation of Oracle AS fails.
Does anybody know a cause for this, or a workaround to get AS installed ? ThanksThe mixture of slashes and backslashes isn't an issue for Windows. I have examined the failure of the assistant, but with the new release of AS10g (release 2), I would like to know if you still have the problem you describe.
-
OPMN Configuration Assistant Failed - During Midtier Installation
I'll try to make this short and sweet.
2 Boxes both running SLES9 Latest OCS Release (10.1.1.0.2 Sep 27).
By the book install. Have met all pre-install reqs.
Infra box installed okay. Very vanilla install except I opted for port ranges: web 7777, SSL 4443 etc.
Second Box , Midtier.(Apps Install) Trying to get a very vanilla install as well. Did not opt for port changes, took the defaults.
After about 40 minutes of the OPMN Config Assistant trying to start Webcache
and Wireless Notification engine, the installer finally times out and fails.
Logs indicate the following:
Webcache log -- ...Failed to assign port 80: permission denied...server could not initalize
OPMN/wireless_notif_eng_1003 log --Panama server notif..eng..1003 failed to initalize
ipm.log -- Process Crashed: OC4J~OC4J_imeeting~default_island~ Restarting
Even getting some indication of sql*net listener for email on port 25 failing because of permissions.
I was under the impression that the installation user id had rights to make high level changes. (I did get the prompt to run the root.sh)
I have the Metalink guys on this as well and its got them digging a bit deeper.
Does anyone have any ideas? What am I missing here?
Thanks in advance!
PaulThe Infra box install did give me a problem when I left the port selections to default (I did not use a portlist) i.e http=80, https=443, ldap 389, sldap 636. It refused to finish the install because it did not have rights to assign services to ports below 1024.
I thought that the Root.sh script took care of that issue (which has been confirmed by the Metalink folks) So I went with what some of the examples in the install guide had and used 7777 for http, 4443 for https, 3060 for ldap and 3131 for sldap. The Infra box then installed without a hitch.
I have met or exceed the hardware requirements for both boxes and have followed every detail regarding OS configs prior to install.
I am running into the same issue when installing the Apps box. Trying to take the defaults, no portlist file, just a plain default install.
I have double checked that no other services are running on these new boxes as I installed the OS with no bells or whistles. Very plain setup in other words.
My last chat with the Metalink guys seem to think there is a permissions issue and that SLES9 is not playing nice when executing the root.sh. script.
I am really flustered. Any ideas? -
I'm in the process of installing Oracle E-Business Suite 12.1 on RHEL.
This is where I'm stuck at: having trouble starting OPMN.
While looking up Metalink, I found Doc ID:ID 422562.1 close to solving my issue.However I'm not sure how to use the solution.
Here's the solution:
1. Install the 32-bit version of glibc-devel-2.3.4-2.19.i686.rpm.
Where can I download this file and any steps to install it would be great?
Note: To install 32-bit packages on a 64-bit system, you may need to use the force option and the nodeps option of the rpm utility.
2. The glibc-devel-2.3.4-2.19.i686.rpm installs the crt1.o into /usr/lib; confirm that this file now exists:
cd /usr/lib
ls -l crt1.o
3. Deinstall this failed installation.
Do I have to deinstall the entire EBS install or just the Oracle AS 10.1.3?
4. Remove contents of /tmp and /var/tmp.
5. Reinstall Oracle Application Server 10.1.3.0.0
How can I reinstall just the Oracle AS 10.1.3?
Please help.I kindly advice you to move this thread to "Application Server" section of this forum...
-
Opmn configuration asistant failed
I installed ORACLE AS 10.1.3.0 on RHEL 4.
I had installed oracle 10.2.0.1 database and 10.1.2 DS on the same machine.
At the last point of installation,the opmn configuration assistant failed.
This is what the install.log files says:
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "OPMN Configuration Assistant" failed
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed.The opmn.log file says:
08/02/26 12:02:03 [ons-internal] ONS server initiated
08/02/26 12:02:03 [pm-internal] Create pm state directory: /u1/appas/oracle/product/10.1.3/OracleAS_1/opmn/logs/states
08/02/26 12:02:03 [pm-internal] PM state file does not exist: /u1/appas/oracle/product/10.1.3/OracleAS_1/opmn/logs/states/.opmndat
08/02/26 12:02:03 [pm-internal] OPMN server ready. Request handling enabled.
08/02/26 12:02:11 [ons-internal] ONS server initiated
08/02/26 12:02:11 [pm-internal] PM state directory exists: /u1/appas/oracle/product/10.1.3/OracleAS_1/opmn/logs/states
08/02/26 12:02:11 [pm-internal] OPMN server ready. Request handling enabled.
08/02/26 12:02:11 [ons-listener] 127.0.0.0,6100: BIND (Address already in use)The opmnctl status command:
Processes in Instance: oraAS.oraweb
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
OC4J | home | N/A | Down
ASG | ASG | N/A | DownDuring installation, ichecked automatic port selection.
It seems no port has been assigned by OUI.
Any advice guys,,,
Thanks$ ./opmnctl status
Processes in Instance: oraAS.oraweb
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | home | 3469 | Alive
ASG | ASG | N/A | Down
I can't see http server running so i did
$ ./opmnctl startproc ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================opmn id=oraweb:6200
No processes or applications match the specified configuration
Now what should i do? -
Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails
Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿? -
OC4J Instance Configuration Assistant Failed during SSO install
Hi,
I am building a Oracle Portal on Linux Server, at step of SSO installation i reached an error *"OC4J Instance Configuration Assistant Failed"* .
In the log file i found that :
Calling updateConfig to notify DCM of new deployments...done.
Adding OC4J mount points for application 'wirelesssso'...done.
Adding OC4J mount points for application 'oiddas'...done.
Adding dependent libraries for application 'sso'...done.
Adding OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'wirelesssso-web' to default-web-site for application 'wirelesssso' in OC4J instance 'OC4J_SECURITY'
Web app 'wirelesssso-web' bound successfully.
Binding web app 'ui' to default-web-site for application 'oiddas' in OC4J instance 'OC4J_SECURITY'
Web app 'ui' bound successfully.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: RMIConnection Disconnected
at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: RMIConnection Disconnected
at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
at __Proxy0.bindWebApp(Unknown Source)
at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
... 9 more
Calling updateConfig to notify DCM of new web-bindings...done.
Adding application 'wirelesssso' to the DCM repository...done.
Application 'wirelesssso' deployed successfully.
Adding application 'oiddas' to the DCM repository...done.
Application 'oiddas' deployed successfully.
Undeploying application 'sso' from OC4J instance 'OC4J_SECURITY'.
java.lang.reflect.InvocationTargetException
FAILED!
ERROR: Caught exception while undeploying 'sso' from 'OC4J_SECURITY':
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: IOException communicating with the remote server: Connection reset
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
... 8 more
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2508)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2361)
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
... 8 more
Removing OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Calling updateConfig to notify DCM of undeployments...done.
Stopping OC4J instance 'OC4J_SECURITY'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /u01/oracle/OraHome_1/j2ee/deploy.ini to /u01/oracle/OraHome_1/j2ee/deploy.ini.1342977480035.bak.
Writing any undeployed entries back to /u01/oracle/OraHome_1/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
Can any one solve it.
Thanks very much!Use physical disks, not NFS mounts. But you are still restricted to a 10.2 database max. SSO won't install in an 11g database with the repca tools from IDM 10.1.2 and 10.1.4.
Maybe you are looking for
-
How do I use external hard drive
how do I use external hard drive and Photos? I keep getting a msg that there is not enough free space on your photo library volume - i even bought 500Gb of space on iCloud.... that didn't even work please help
-
Add external ethernet drive to time capsule
Hi! Is possible to attach an external ethernet drive (Seagate or Western) to the timecapsule to expand storage space? Thanks! J
-
TDS on Payment (Indian Scenario)
Hi, Following are the steps to deduct TDS on advance payment to supplier in SAP. 1. Make AP downpayment invoice 2. Make outgoing payment 3. AP Invoice In this case what problem we are facing is that customer deduct TDS while making payment and if we
-
Mobile Sales 5.0 SP8 missing dlls
Hi guys, I just upgraded our development station from 3.1 to 5.0 SP8. Now I'm missing two DLL files. APOATP.dll or Interop.ADODB.dll and FactsNet.dll. I think I need this DLLs for the businessobject BOBPFACTSHEET and SALESDOCATPMANAGER. Actually they
-
ITunes 10.6 crashes every time on full screen movies
Take any movie, start playing in a small window. Click on the full screen arrows and kaboom - crash. Apple's software QA is atrocious and discouraging.