OPMN Fails to start during install

Hello,
I am trying to install Discoverer 10.1.2.3 in order to convert it to use R12. I have installed it many times for 11.5.10.2 without a problem. However this time, I get to the end and get a message:
OPMN has faiiled to start.
I let the install finish cause there is no other option to cancel at that time. I go to check the logs dir but there are no logs?
One thing I would like to know. We are using a 64bit server now for our APP tier in our TEST R12 environment.
Is the problem that Discoverer is 32 bit and I am trying to install into a 64Bit machine?
Other than that, is there something else I can look at or try?
Thanks.

Thanks Paul, really appreciate the update. Spent this morning rebuilding our environment with 64-bit (Win 2008) and starting from scratch. The install has now succeeded. I tell you one thing you pointed out is something we noticed when we proceeded with the second install. That was the WebLogic version. I had initially used .4 and on the second install we used .3. I am guessing that this may have been the issue.
I will verify with our Oracle resources and I hope this post will assist other when doing the 64-bit install as I think it is very vague in the documentation.
I will update the post with Oracles response as well.
Just as an FYI... the reason this issue came up in the first place was we did an Enteprise Install on 64-bit and found that the Gauge Charts weren't working in the SampleAppLite Subject Area. So I will add that to the Tags for this post.
Hope this post helps others and they don't go through the headaches of a wrong install type.

Similar Messages

Apple mobile device failed to start during installing itunes

I got an error message while trying to install iTunes says that apple mobile device failed to start. i ignored this message and continued the installation process but it gave me another error and iTunes didn't work. i uninstalled it many times and tried many of the solutions on the support communities but it didn't repair it and i still have the same problem and now I can't use iTunes at all from the time i tried to upgrade to latest version.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
The "for older video cards" version may well work for you when the regular 64-bit installer does not.
tt2

HT1926 Service 'Apple Mobile Device' failed to start during install

Uninstalled iTunes.. new install of iTunes..
Installation fails with:
Service "Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system serves.
Running installation with "Run as Administrator" selection with an Administrator level account
Any help or insight would be greatly appreciated

Hello mrrodgers73,
The following article provides steps that can help get the Apple Mobile Device service sorted.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
Allen

"iPod service failed to start" during install

Trying to update iTunes to the latest version however, I get the message "Service, 'iPod service' (iPod Service) failed to start. Verify that you have sufficient privleges to start system services"
I'm using the administrator account. I can (sometimes) see the ipod service when i run services.msc from the run dialog box however i am unable to start it from there either as it says there's something missing. I've tried following the complete uninstall of iTunes and quicktime instructions on the apple support pages to no avail.
Whilst the installer wont finish, i can still run the new version of iTunes by opening it form the 'program files\itunes' folder but if i try to close the install box, iTunes gets uninstalled again.
I do vaguely remember disabling / doing something to the ipod service at one point for reasons i don't remember. I realise this is most likely the cause but how to solve it... i'm drawing blanks.
Bring me back my iTunes... Please.

Trying to update iTunes to the latest version however, I get the message "Service, 'iPod service' (iPod Service) failed to start. Verify that you have sufficient privleges to start system services"
that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
iTunes 7.0.2.16 Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
does the install go through properly this time?

Apple mobile device failed to start when installing 11.1.4.62 itunes version

got erroe apple mobile device failed to start when installing 11.1.4.62 itunes version on Windows 7 PC

I am still waiting for anybody that can help me with this problem. I have uninstalled and reinstalled many time without success.

Apple mobile device failed to start during download

apple mobile device failed to start during download

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

OPMN Process Manger failed to start during Oracle 10gAS installation

Hi,
I am installing OracleAS 10.1.2.0.2 on AIX 5.3.
I am facing this problem while installing infrastructure
services.
I am facing an issue like
"OPMN Process Manger failed to start"
Please help me to solve this.
regards,
Mat

Hi,
Thanks for the replay. I am doing the installation once again. Now I am not facing OPMN problem.
Now I am facing some another problem. That DBCA fails to create infrastructre metadata respository database. Why it is happening?
regards,
Mat.

Oracle web tier install+config: opmn does not start after install

Centos 5 box.
After a silent install of web tier 11.1.1.2 opmn will not start. The installation was "complete" but I found some errors in the various log files.
When I try to start a process (for example) using opmn this error occurs in the log file:
[2011-03-31T16:31:49][opmn][TRACE:1][][OPMN]Failed to open wallet (file:/apps/oracle/orahttpserver/as_1/instances/instance2/config/OPMN/opmn/wallet) [default password] (28759)
Command line says unexpected error, code 512 or something to that effect. The given wallet directory is empty.
Checking back through the install & configure logs:
java.lang.NoClassDefFoundError: oracle/security/crypto/core/PublicKey
        at oracle.as.config.utl.FileUtil.createSelfSignedOracleWallet(FileUtil.java:697)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:631)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:667)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:558)
        at oracle.as.config.impl.OpmnProvisioner.generateWallet(OpmnProvisioner.java:70)
        at oracle.as.config.impl.OpmnProvisioner.createOpmnConfiguration(OpmnProvisioner.java:366)
        at oracle.as.config.impl.OracleASInstanceImpl.createOpmnConfiguration(OracleASInstanceImpl.java:586)
        at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:107)
        at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:137)
        at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:83)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
        at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
        at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
        at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
        at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
        at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
        at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
        at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
        at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
        at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.security.crypto.core.PublicKey
        at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
        ... 22 more
The configuration of completed successfully.
Checking a screen shot of someone else's configure output theirs continues beyond
"Bootstrapping OPMN configuration files..."
and correctly generates the instance etc.
I have tried a reinstall, and also tried a generate a new instance using the silent config tool. Same errors each time.
Log also states;
Oracle Instance Home
                        Instance Home Size: 0 MB (or 40mb)
                        Available: 0 MB
. This varies between installs and configs but available is always 0. There is Gb's of space available in the directory and the user has write permissions.
Can anyone tell me why it is failing to correctly generate the wallet?

Solved. Oracle_home and Instance home must be subdirectories of MIDDLEWARE_HOME. MIDDLEWARE HOME and command to not install updates must be added to response file. Helpful to install and configure separately.

JDEV 10.1.3 fails to start after installing updates

After attempting to install the latest updates for JDeveloper 10.1.3 (the updates failed to install), JDeveloper fails to start.
The platform is Windows XP Professional SP1.
Using jdevw.exe, the "splash screen" is the only thing that starts, and it just sits there until you click on it (that closes it!).
Going to a command prompt, and typing jdev.exe, it returns a bunch of errors, most of them are either java.lang.NoSuchMethodException or java.lang.NullPointerException. Each of those errors is accompanied by about 20-25 lines of additional information.
I have searched the forums, and found some similar problems, but did not find a solution that works for me.
Please help!

Thanks for your help.
Here is what I did:
a) Renamed the previous JDEV 10.1.3 install directory (so I could use that name when I reinstalled JDEV)
b) Reinstalled JDEV 10.1.3
c) Installed all updates from the Official Oracle site only. This time, it was successful.
As for things to "carry over" from the old install: I had to copy my Oracle connection information for connection pooling, and I had to reconfigure the CVS connection. The previous applications in "mywork", however, were still in the directory for the previous version (10.1.2) of JDEV, as JDEV did not move it even though them even though they were migrated from 10.1.2 to 10.1.3.

OPMN Failed to start: Value too large for defined data type

Hello,
Just restared opmn and it failed to start with folloiwing errors in opmn.log:
OPMN worker process exited with status 4. Restarting
/opt/oracle/product/IAS10g/opmn/logs/OC4J~home~default_island~1: Value too large for defined data type
Does anyone have ideas about cause of this error? Server normally worked more than 6 month with periodic restarts...

Hi,
You could get error messages like that if you try to access a file larger than 2GB on a 32-bit OS. Do you have HUGE log files?
Regards,
Mathias

Configurations tools ( netca,dbca ,assistants) not started during install

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

ActiveX failed to register during install

Great. Running Flashplayer for years. Go to update to v14.0 and now I have none! Same error during install, "ActiveX failed to register." Tried everything. Deleted all. Turned off ActiveX filter. Run as Admin. Nothing works. Google the issue and find a dozen different ideas but none work. How can such a critical component like Flashplayer not download properly? Very disconcerting and disappointing.
Windows Vista Home Basic, IE9.

Hello Pat:
1. I used the Flash Uninstaller, rebooted, then tried to download again. Same issue. I then tried a routine called fix.cmd
cd /d "%ProgramFiles%\Windows Resource Kits\Tools" subinacl /subkeyreg HKEY_CLASSES_ROOT /setowner=administrators /grant=administrators=f /grant=system=f
which also didn't help. I downloaded flashplayer_14_ax_debug.exe to desktop and ran as Admin, no help.
So now I ran your link, and it said it was successful. But when I went to the Test page, it said I didn't have Flash. So I rebooted and ran the v14. install again, same issue.
Active X failed to register.
What else can we do?
ps I just updated Shockwave without a problem.

Message: Service Apple Mobile Device failed to start when installing Itunes.

When downloading a new version of Itunes I receive a message "Service Apple Mobile Device" failed to start. I have read the articles on how to start Apple Mobile Device. But when I go to services, Apple Mobile Device is not listed. So I cannot start it. Any ideas on how to get it listed so I can start Apple Mobile Device?

I am still waiting for anybody that can help me with this problem. I have uninstalled and reinstalled many time without success.

OPMN failed to start (but it seems running) during setup

I got a warning during setup of Grid Control on new database )10g rel 2 (Linux).
I tried to set on contnue and after setup OPMN starts (as during setup) but ./emctl
start oms fails with unexpected error.
Any suggestion?
Thanks
Fabio

Hi...
I have the same problem.
listener for db10g is started
I set LD_LIBRARY_PATH to lib dirs with libmodapi.so and others and made
"opmnctl startall" succefull
I can connect to EM on 7777, 4489 ports
no any messages in <oms10g_home>/ompn/log don't tell me anything about problems, <oms10g_home>/sysman/log is empty
emctl start oms failed with unespected error :((((
what exactly I have to see on emoms.properties?
OEM 10.2.0.1 on SLES 10

Opmn failed to start

Hi,
I am getting the follwing error while starting the OPMN services for the Oracle Application server 10gR2 .
08/12/18 16:38:22 [4] ONS server initiated
08/12/18 16:38:22 [2] BIND (Can't assign requested address)
08/12/18 16:38:22 [2] 10.187.152.76:399835136 - listener BIND failed
08/12/18 16:38:22 [4] Listener thread 1543: 10.187.152.76:399835136 (0x442) terminating
08/12/18 16:38:22 [1] Local listener terminated
We are giving the ip address for the ONS as the server ip 10.187.152.109,but while starting the ONS server, it is taking 10.187.152.76 bcos of which it is erroring out .
Any idea why it will be resolving to this ip even when in the opmn.xml file we have given the hardcoded ip as 10.187.152.109.

Why have you given hardcoded IP address ?
Please answer the following questions
1) What kind of 10g R2 install this is ? Are you using this for Discoverer, Identity Management, Portal ? What is the product that you are running ?
2) Has it ever worked before ?
3) During the install time, did you not choose the host name (not the ip address).
Can you run the chgiphost.sh script found in the $ORACLE_HOME/chgip/scripts directory (Take a backup of the existing ORACLE HOME)
-Thanks
Srinivas

OPMN Fails to start during install

Similar Messages

Maybe you are looking for