OPMN is getting restarted automatically and causing production outage

Dear All
Greetings!
OPMN is getting re-started automatically and causing production outage. During this re-start period, all the requests (Orders) that we are receiving from external
systems(CRM) are getting failed. We are using Oracle AS 10.1.3.3 version. I have checked the glance report and observed that java processes are toucing 99% or 100% CPU utilization during restart period.
We have increased the number of JVMs from 2 to 3 to solve this issue. But still issue is not fixed.
Please post your suggestions to resolve this issue. Thanks in advance!
Sridhar Nimmagadda

Similar Messages

Lenovo Vibe Z2 Pro getting restart automatically.

Hi
I am using Lenovo Vibe Z2 pro and i have observed from last couple of week this phone gets restart automatically and then it's shows one sign in the top up of the screen, this sign is with the phone and red bubble in the secure icon.
Can anybody help me to understand and fix this problem ?
Thanks

The phone is DSDS(Dual Sim/Dual Standby) not DSFA(Dual Sim/Full active).
''If one of your SIMs are in use, the other SIM will automatically be put on hold.'' Put on hold=not available
''Could you tell me how i can disable the secure zone ?'' It would be better to put that question HERE.
Hope this helps.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

N95 gets restart automatically while video recordi...

Whenever I try to record video more than 4-5 min, my N95 gets restarted automatically while recording and doesnt even save the video. But when I record smaller video say 1-2 min everything is fine. I have Phone from O2 germany and Nokia website says that I have latest software version installed.
Please help me to fix this problem.
thank you

I have reboot problems as well. I haven't had the chance to try long video but it will reboot on almost any application.
As soon as the battery load is too high (it does get warm). I think it has to do with not being able to supply the current draw so the voltage drops and the phone reboots.
For me it was Maps that caused the reboot, or if I'm in maps and I get a phone call it would reboot. I could even get it to reboot when I was scrolling through the contact list non-stop.
See my post for more info. /discussions/board/message?board.id=smartphones&thread.id=102019

How to get Mavericks server that is connected to a UPS to restart automatically after a power outage.

This is driving me crazy. Is there anyone running Mavericks as a mission critical server on Backup Power Supplies that has a way to get the servers to restart automatically after a power outage. The UPS vendors all have software for Windows, but not Macs, and the setting in System Preferences, doesn't work with the UPS's Iv'e tried (2 different APC models (Smart and Back-UPs), one Triplite (Smart) and one CyberPower, (all claiming to be Mac compatible))

APC do apparently still do a command-line daemon (PowerChute Network Shutdown) which monitors over the network the UPS and will cleanly shutdown the Mac. For lower-end UPS devices these are typically connected via a USB cable and the built-in Apple System Preferences let you control the options - if it is a model supported. There is however a big limitation of using a USB connection which is that you can only connect a single computer to a UPS via USB and of course most companies have multiple servers.
It maybe that what is happening even if you use APC's software is the following -
Power failure detected by UPS
Signal sent to Mac
Computer does a clean shutdown
Power restored
UPS has no way to tell Mac because it is shutdown and Mac does not support 'Wake on LAN' if fully shutdown
The Mac does have an option to 'Startup automatically after a power failure'. However this might only take place if the Mac is not cleanly shutdown, it could be that if the Mac is cleanly shutdown it does not count this as a power failure. If this is correct then there is nothing that can be done as users to resolve this, the only way it could be resolved would be if Apple provided a way for a tool like APCs software to both do a clean shutdown and set a flag as this being due to a power failure so that when the Mac does detect the power being restored it triggers the Mac in to booting.
In the dim and distant past when Macs used ADB to connect keyboards and mice the ADB interface did support an external power-on signal. This does not exist for USB.
Personally I have regarded the APC software (PowerChute Network Shutdown 3.0.1) to be so badly supported and so old as to be too risky to use. It lists 10.7 and 10.8 but not 10.9 and uses Java 1.6 which itself is unsupported. There is a third-party tool you might want to look at called NUT (Network Ups Tools) see http://www.networkupstools.org
NUT is free and lets you do clever things like -
Connect a single computer via serial or USB to the UPS
Act as a 'server' over the network to other computers sharing the UPS
When power failure is detected the NUT 'server' sends a signal to the NUT 'clients' so all of them know that there is a power failure and can do their own clean shutdowns
This gets round only being able to connect a single computer via USB.

I've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should i do???

i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME

Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

My ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps.

When i connect my ipad2 64 gb to power its getting restarted again and again any one have any solutions???

when i connect my ipad2 64 gb to power its getting restarted again and again any one have any solutions???

You only need to post one time.

E75 - Characters getting typed automatically and B...

Hi,
In the last few days Bluetooth is getting enabled automatically and alpha numeric characters are getting typed on their own in my mobile. The characters are like "*+p+*x++*+p*0"...and sometimes when i try to open some menu its automatically taking me to some other menu. Is it anything related to sensor issue. Can anyone help me in troubleshooting this issue. Thanks in advance.
Regards

Sounds like you have hardware issue with the lower part och you keypad. I would suggest taking your phone to a service center.

BPEL instance getting restarted automatically

Hi All,
The BPEL instance is getting restarted automatically for every 10 minutes.
Below is the error found in the log.
Any help will be appareciated..
<2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSourceWorkflow
<2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSource
10/08/27 18:15:43 System.getProperty(dehydration.store)=null
<2010-08-27 18:15:44,044> <INFO> <collaxa> <ServerManager::__init> Detected datasource 'oracle'
<2010-08-27 18:15:44,061> <INFO> <collaxa> <gsServerSchemaManager::validateCompatibility> Detected database version '2.0.4'
<2010-08-27 18:15:44,062> <INFO> <collaxa> <ServerAdaptorManager::init> Initialized adaptors for platform 'ias_10g'
10/08/27 18:15:45
GMS: address is 10.90.188.91:11326
-------------------------------------------------------

Hi,
Could some one please help me.
I suppose it could be of a below property?
Could some one please explain what this is all about?
<web-app application="jamagent" name="jamagent" load-on-startup="true" root="/jamagent" ohs-routing="false" />

Cancelled messages getting restarted automatically

Hi all,
I am facing one issue in pi 7.0, we cancelled some messages in sxi_monitor, but after cancellation also these messages are getting restarted automatically. please help me to solve these issue.
Regards
Pradeep P N

Hi Raja
Yes we configured restart of failed messages, but after cancelling the messages i think it won't get restart automatically. if i am wrong please correct me.
Rgds
Pradeep P N

My computer restarted automatically, and since then, Firefox refuses to load, it crashes instantly as I try to open it, I cannot access any of its options that way. What can I do?

Last night, as I was asleep, my computer restarted automatically, most likely due to an update of some sort. Usually, that is not a problem, as everything works just fine afterwards. HOWEVER, this time, it was not the case. Since it restarted, Firefox (3.6) refuses to start properly, and crashes immediately.
I can see the white page popping up for a split second before getting a message saying that it crashed, and that I should send a report. I tried looking at the help FAQs on this website, about how I should be able to get a code for that specific crash's details. The problem is, however, that my last submitted report, according to my computer, is in june 2010, and we're currently in september 2010.
I still tried to refresh after the report has been completed, but nothing. So I figured I'd try to check in the details of that latest report, but 'lo and behold, it doesn't work, even though I followed the explanations provided on this website perfectly.
I did try to restart my computer again, and even download the latest Firefox version again, and reinstall it (even though that's what I had), but to no avail. It still does the same thing.
At the moment, I am using explorer, and would very much like to be able to use Firefox again, as I have most of my bookmarks in there and usually prefer to use Firefox, although I've been having other issues with it lately. I don't think they're related to the constant crashes, but if you insist on me sharing those, then I shall do so.

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

CF 5 server getting restarted automatically.

Hi
In one my production servers we have ColdFsuion 5. From the
last week , its automatically getting restarted.
I have observed the Server logs i found this issue. due to
this all my users are getting frustated, as they are missing the
data in the middle.
Ex:
"Information","1","02/20/08","11:03:32",,"The ColdFusion
Application Server started."
"Information","1","02/20/08","12:09:32",,"The ColdFusion
Application Server started."
how to overcome this? In what scenarios this issue will
happen?
could any one have an idea on this.
Srinivas

Hi
Check the Heap size. SAP Note:Note 723909
hope this helps
Rgards
-madhu

Excise invoice getting reversed automatically and adding more line item

Dear sir,
i m creating one item delivery and invoice and excise invoice and in excise invoice no excise duty is capturing and it is saved.when i go to display excise invoice shoowing excise invoice cancelled and reversed automatically and adding another item into that.
can u tell me why it is happening?
regards,
Debesh

gghh

Tomcat getting restart automatic

Guys,
We have a desktop application distributed using java web start.
We are using tomcat 5.0.28 as web server.
There are many other applications which are distributed using this server.
Now the problem is when ever any application jar file is changed and put in the tomcat folder the tomcat server is shutting down automatically.
Is this controlled by any parameter in the tomcat configuration
please let me know your thoughts
Thanks,
Balaji

Sorry guys found the problem.
The jar file deployed on tomcat was referred for starting rmi server.
When the jar file is changed we were stopping and restarting the rmi server.
In the stop script of the rmi server we were killing all the java process running with a particular user id.
Since the tomcat web server process and the rmi server process were from the same user id it was causing the problem
Thanks,
Balaji

Restarted Automatically And All my Files are Gone

Hello Dear
I have a problem, my laptop
Toshiba Satellite C850 -B253 is automatically restarted and all my files are gone.
From 300gb plus and now 42gb are remain. And worst of that are all my
Microsoft is gone. The Word, Power point and excel in short all are gone. And also my
web cam and another gone is my account. When I open my laptop its preparing something like that and after a few hours lower screen they have quotation
“________ ___ ___ for new user” and they signing for new account! And I have no choice so I create new account then when it’s done I realize all my files are gone. The only still have is
“play games, recycle bin, nero kwik media, and music place”. So what should I do! I don’t even use now! As a college student it is very important for me. Like now this weeks is my exam so what should I do Please Help me!!
PLEASE!! PLEASE !!

Help me please

OPMN is getting restarted automatically and causing production outage

Similar Messages

Maybe you are looking for