OPMN process failing every second on 12c agent install Windows servers

Hi,
I have installed the 12c agent to both Windows 2003 and Windows 2008 servers and on both OS's I receive an application error event in the Windows logs that the opmn.exe is crashing. I have no idea what this process is or why it's crashing. I don't see any OPMN\logs in the home directory. Any idea what I"m doing wrong? I'm installing it with a response file and it seems like it's working fine otherwise, but I cannot figure out why it installed this opmn.exe and how to install it without it?
Any help hugely appreciated!!
Thanks

Hi,
This is caused due to the service 'Oracle-agent12r1ProcessManager' that gets created as a part of 12C agent.
Issue is being investigated in following BUG:
BUG 14610919 - WINDOWS AGENT INSTALLER 12C BP1 INSTALLING OPMN.EXE SERVICE
Stopping the service Oracle-agent12r1ProcessManager will stop the errors and will not have any impact on the functionality of the agent.
Regards,
Venkat

Similar Messages

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

Netctl-auto fails every second boot

So, since about two oder three days ago, my netctl-auto fails every second boot and I can't even enable a profile manually.
I already found this thread: https://bbs.archlinux.org/viewtopic.php?pid=1275755
But I checked and don't have any failed units and dhcpcd is not running.
I will do some further investigation and post it here. Any ideas for solutions are welcome
Wolle

I've been having the same problem as well, it boots up just fine then after a reboot netctl-auto fails which had been going on for me for the past 30 minutes without "fixing" itself.
After I added the line:
TimeoutDHCP=30
to my profile then rebooted, it worked. It could be a fluke "fix" but worth a try. I *think* the reason it worked is that the default timeout is 10 seconds which might not be enough to establish a connection for some routers/network cards.
EDIT: I did another boot to see if it was a fluke, and it was. I'm getting a little tired of netctl-auto... I'm going to just disable it and manually do a "netctl start <profile>" after I boot up.
Last edited by DukeH (2013-07-16 19:07:58)

HT4623 Latest iOS 7.0.6 update fails every time I try to install! Can anyone help?

Every time I try to install this update software it fails with 'An error occurred'! This is happening far too often! Can anyone help me? Thanks

I have had the same problem for the past 10 days. The update fails about 75% of the way through and said that the there is an error in the download of 7.0.6. It has been unsuccessful. I tried to update through ITunes and the download finishes and nothing further happens. There is no error message number, just stating there is an error. I sure would like some help in resolving this problem. The update went just fine for my IPhone5S and my husband's IPhone 5.

1-2 Second Audio Delay after installing windows 7

I installed windows 7 on monday but whenever i do anything that has audio it is always delayed by -2 seconds.
For example when playing Dragon Age Origins an npc's mouth moves then a second latter the audio finally comes.
When listening to music it isnot that noticable since it is just audio but when i pause or stop it the audio continues for -2 seconds.
When watching videos on Hulu it is the same as games where the voice comes about -2 seconds after the person's mouth moves.
I have everything up to date via the auto updater and checked on here to verify the correct drivers are installed and they are indeed the latest.
Everything worked fine when i had vista but this issue may not be big to some but since i am a big very gamer this is a major problem and if not fixed soon i will remove the card and use the crappy onboard sound.
Any help fixin this issue would be greatly apreciated.
Edit: Forgot to mention that i use the creative sound blaster x-fi titanium card
Edit: I managed to fix it by deleteing EVERYTHING Creative and using ONLY the newest driver from the site, however doing this pretty much makes my card nothing more than a fancy onboard sound card since it doesn't have any of it's features.
The updater doesn't detect my card and when it does and i install anything from the list i get this audio delay issue.

If you are running FCP 4.5 and OSX 10.4.9, >>THIS THREAD<<</a> may be of interest.
x

OEM 12c agent install on windows server 2008

I'm trying to do a silent installation of the linux x86-64 agent software. I've done:
%OMS_HOME%/bin/emcli login -username=sysman -password=<password>
%OMS_HOME%/bin/emcli sync
%OMS_HOME%/bin/emcli get_supported_platforms
These were are successful. However I am having issues running:
%OMS_HOME%/bin/emcli get_agentimage -destination=c:\temp -platform="Linux x86-64" -version=12.1.0.2.0
Platform:Linux x86-64
Destination:c:\temp
=== Partition Detail ===
Space free : 31 GB
Space required : 1 GB
Check the logs at get_agentimage_2012-12-19_09-35-58-AM.log
Pushing of agent image with plugins and oneoffs has failed.
In that log file:
Platform:Linux x86-64
Version:12.1.0.2.0
Destination:C:/temp
Getting Agent Image ...
Getting Platforms list ...
Called the method getAllAgentCoreShiphomesList()...
List platform:Oracle Solaris on SPARC (64-bit)
Arg platform:Linux x86-64
List platform:Linux x86
Arg platform:Linux x86-64
List platform:HP-UX PA-RISC (64-bit)
Arg platform:Linux x86-64
List platform:HP-UX Itanium
Arg platform:Linux x86-64
List platform:IBM S/390 Based Linux (31-bit)
Arg platform:Linux x86-64
List platform:IBM AIX on POWER Systems (64-bit)
Arg platform:Linux x86-64
List platform:Linux x86-64
Arg platform:Linux x86-64
its equal...
platformShortName =linux_x64
platformID =226
List platform:IBM: Linux on POWER Systems
Arg platform:Linux x86-64
List platform:Microsoft Windows x64 (64-bit)
Arg platform:Linux x86-64
List platform:Oracle Solaris on x86-64 (64-bit)
Arg platform:Linux x86-64
List platform:Microsoft Windows (32-bit)
Arg platform:Linux x86-64
List platform:IBM: Linux on System z
Arg platform:Linux x86-64
Platform Short Name:linux_x64
Platform ID:226
Agent Image Name:12.1.0.2.0_AgentCore_226.zip
Image doesnt exist for this platform:Linux x86-64 and version:12.1.0.2.0
In the c:\temp directory I have downloaded the agent software 12.1.0.2.0_AgentCore_226.zip. I'm not sure what I'm doing wrong. I've tried unzipping this, deleting it, switching directories. I'm sure I'm doing something really stupid, but can't seem to figure it out.
Thanks.
ETA: I think I found my problem. I only downloaded the linux x86-64 binaries (12.1.0.2 Agent zip for Linux x86-64 (233,396,034 bytes, cksum 3827353588)). Do I need to download the entire Enterprise Manager Cloud Control 12c Release 2 (em12cr2_linux64_disk1.zip, em12cr2_linux64_disk2.zip, em12cr2_linux64_disk3.zip)?
Edited by: 805128 on Dec 19, 2012 9:58 AM

That is where I'm having the problem. I can't get the self update to work, because I keep getting timed out... I know it has something to do with my proxy server. This server doesn't have access to the internet, but has all of *oracle.com websites available to it. So basically I was trying to find a way around using that self update... Every time I test the https://updates.oracle.com link in the proxy settings in OEM. It says the test succedded, but when I try to update my credentials for MOS, I keep getting timed out.

OEM 12c Agent Install in HP package

resolved.

There are no 12c plugin available till date to support your option 'b'. The only available plugins are 'HP Service Manager Connector' and 'HP Operations Manager Connector', and these two serves different purpose. The first one is for incedent management and the second one is for monitoring hp performances etc..

ITunes install fail - Apple Mobile Device Support not installing - Windows 8

So I have a Windows 8 Pro system, and I've had to reinstall iTunes. Anyway I've been completely unable to do so. It simply either gets an error and does not install (where does itunes store its installer log files so I can see whats happening?) at all or it gets to the part where its starting up services and it fails when its trying to install and start the Apple Mobile Device Support service and so when I start iTunes I get an error message like this one:
"This iPad cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes"
I've tried several times to uninstall and manually delete all the files related to itunes, but this has made no impact.
I have no idea what to do. Reinstalling my OS and all the apps just to get iTunes back really isn't something i want to do.

All sorted now. Sorry b noir, but I cannot remember the error. What I did was use the idea from another thread to copy the necessary files from one computer to another. Fortunately I have a laptop on 8 so updated iTunes and coppied all the files from the /Program Files (x86)/Common Files/Apple/Mobile Device Support. I then downloaded 2 programs to make the necessary registry entries. This did not fully work so I searched the laptop registry for the version number of Mobile Device Support and then put it into the same desktop registry key. This worked as I was now at the correct version.

Every time I try to install windows service pack 2 I get error message WindowsUpdate_80004005

When I try to install windows service pack 2 I get error message WindowsUpdate_80004005, has anyone else had this problem and how do you fix it

If you have an external drive (USB thumbdrive or hard disk) connected, disconnect it and try the service pack installation again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

C7-00 Recent social software update failing every ...

Hi...
The recently realesed social software update is failing every time i try to install it.....tried doing it through PC suite and also the same problem if its done from the phone. One more problem is that C7 does not support the flv. format videos...am asking this coz the belle referesh had a point added such as enhanced fetures in the update.
Kindly check on thiS
regards,
aunny

Hi Noblesunny,
Have you checked that you have enough internal memory (C to perform the update? You need a fair amount (say, 50MB at least) to ensure that the installation is completed succesfully. You can also try uninstalling the old version, by going to Settings > Installations > Already installed, and tapping and holding and selecting Remove, on the following items: All Activity Widget, Social, Social Facebook Summary, Social Home Screen Widget, Social Installer I, Social Installer Helper, Social Twitter Widget. Then turn the phone off and on again, and see if it works.
Also ensure that you are updated to the latest version of Nokia Suite, 3.6: http://nokia.com/nokiasuite
Let us know how you get on.

Updates fail every time for CS5

Sir/Ma'am,
Why are my updates failing every time on a clean install with a good SN# that is activated?
Red

Nobody can know. You have not provided any relevant technical details like system info, error codes/ warnings and so on.
Mylenium

How to recover from failed 12c agent deployment

Greetings,
I am in the process of upgrading to OEM 12c using the 2-System method and I am slowly making progress. Using the OEM 12c Upgrade Console I was able to get the Deploymnet/Configuration step to succeed but the Check Agent Readiness Step failed. I found the error in the <Agent_Instance_Home>/sysman/log/gcagent.log file on the target machine - ORA-12505, TNS:listener does not currently know of SID given in connect descriptor.
Once I resolve that is it simply a matter of going to the Upgrade Console -> Deploy and Configure Agents page, select the cleanup failed deployments tab and go from there or is there something else I must do. I haven't been able to find specific instructions on how to proceed in such a situation.
Thank you.
Bill Wagman

Hi Bill,
Yes your understanding is correct, just slect the option " cleanup failed deployments " while doing the agent deployment and it will take care of everything.
I also see that you have posted few queries in the forum about EM upgrade , i suggest you open an SR with oracle support , so that they can guide you through the upgrade process and help you in case of any issues. In case you have already opened an SR with support then pls ignore this suggestion. :)
Regards
Akanksha

Where is the entry which autostart opmn processes and agent on linux COS53?

Hi,
I set up successfully a 10.2.0.5 on CentOS 5.3 (like OEL 5.3),
I see that the opmn processes and the agent are started at boot.
Because I set up the repository on a 10.2.0.4 DB on the same machine I would need to set the start after the DB is up and running (either manage by myself the opmnctl , etc, or editing the current start process to add the dbstart procedure before.
I took a look but I do not see en entry in init.d or in rc.local.
I am missing something.
Could someone give some info?
Thanks
Fabio D'Alfonso

Thank you for your responses. Here's the Apache error_log file, when the static_port.ini file is specified (when I used Automatic port generation, there are no mod_ossl errors):
[Tue Jan 27 15:15:32 2009] [warn] pid file /home/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Tue Jan 27 15:15:32 2009] [error] mod_ossl: Init: Server rh301.is.local:4443: SSL setup failed: call to nzos_Initialize returned error -1073744712
[Tue Jan 27 15:15:32 2009] [error] mod_ossl: Unknown error
[Tue Jan 27 15:19:55 2009] [warn] pid file /home/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Tue Jan 27 15:19:58 2009] [warn] pid file /home/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
~
Again thank you

Failed to start e-TEST agent: error starting agent: \ne-TEST process ...

Hi,
wihout changing the version or so we suddenly we experience the following error at status page (although the monitored web-page is fine):
Current alert: Failed to start e-TEST agent: error starting agent: \ne-TEST process has not established socket in 30 seconds.
Any ideas?
Thanks in advance

Hi emposadi,
It looks like the e-Load server is having trouble communicating with the agent. Are you running the load test using an agent on the same machine or remote machine? You might want to see if a process has grabbed a port that the server communicates with the agent on. I would reboot the machines in question, shut down the Empirix Application Server and verify that ports 1099 and 9001 are not in use. Those are the ports that e-Load uses to communicate with the agent.
-GateCity_QA

OPMN process failing every second on 12c agent install Windows servers

Similar Messages

Maybe you are looking for