Opportunities with Products not pulling after recent patch
I have multiple opportunities with products and costs associated with them that are not pulling when I run a historical report.
For example:
I run a report on Thursday at 2:00 PM. I have a user who has modified an opportunity on Thursday morning. I understand my historical report pulls everything from the previous day (Wednesday) and prior. However, they only changed the closing date on the opportunity. They did not change anything about the product. The product has had a quantity and cost associated to it since creation (9/2/10). Just because they changed the closing date this automatically rejects the opportunity from the historical report?
My report is supposed to pull every opportunity with associated products and costs. It seems to be neglecting anything that was modified on the day it is ran.
Also, I should mention that the reason I am running a historical report is because the real-time report seemed to be doing the same thing. It wasn't including opportunities with products clearly associated to it. These opportunities would be included in a "opportunity - no product" report.
Thank you
Check that the currencies are set on both the header and products. There is a note about this in the R18 notes.
Similar Messages
-
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Wifi connection with 4s not working after installing new software ios6
wifi connection with 4s not working after installing ios 6.
Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts. -
Not Booting after recent Security Patch/Java update
My wife has experienced what many have experienced with the recent update.
MacBook not booting after update (i.e. - "I have no name!")
I have tried everything posted on this topic since 2/13/09, but without any success. Does anyone have the fix for this yet?
Things I have tried:
* I can boot in safe mode (holding "Shift" while restarting)
* I cannot boot from an install disk(s) (holding C while restarting) - I have both a black one from purchase, and two gray ones with purchase from MiniMac
* Booting with verbose - gets stuck at same place as everyone else
Operating in safe mode:
* I can run DU and "repair" drive
* I can see and access the CD/DVD
* I cannot see drive in target drive mode (doesn't ever connect the 2 systems)
* I downloaded the update files from apple and reinstalled them individually (via USB ext Drive) with a reboot in between
* I attempted to update & archive, but I cannot run install CD from any systems disks (see above)
Has anyone figured out how to fix this yet?Same problem than the other guy who is not mentioning the update in the title.
Powerbook 1.67.
System log said "No user defined computer name" and "using blah blah name" or so.
Mac Os X report (for apple) says:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003900FF1C PC=0x00000000008FC020
Latest crash info for cpu 0:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC -
Problems with IE11 on W8.1 pro - after recent patch?
Couple of problems have appeared recently with IE11 on Windows 8.1 Pro - everything was fine, but I am assuming a recent patch has caused the problem. Problems are not seen on IE11 on Windows 7 Pro or on other browsers. I'm running on auto-update,
so should have the latest software versions.
1) Extra white space is inserted before a table. It happens on multiple web sites. Length of the space varies and could make you think the page has failed. It appears to be consistent for a page but I see no pattern between
pages.
2) Multi level Menus implemented through CSS with drop downs to the side are suddenly inordinately sensitive when moving into the drop down making the menu almost useless.
AlexCouple of problems have appeared recently with IE11 on Windows 8.1 Pro - everything was fine, but I am assuming a recent patch has caused the problem. Problems are not seen on IE11 on Windows 7 Pro or on other browsers. I'm running on auto-update,
so should have the latest software versions.
1) Extra white space is inserted before a table. It happens on multiple web sites. Length of the space varies and could make you think the page has failed. It appears to be consistent for a page but I see no pattern between
pages.
2) Multi level Menus implemented through CSS with drop downs to the side are suddenly inordinately sensitive when moving into the drop down making the menu almost useless.
Alex
Do you have any sample for us to reproduce this issue? We are glad test this issue on my side. If this issue really cause by recent patch, you can submit it to IE connect
https://connect.microsoft.com/ie/.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Adobe form not working after MSS Patch Upgrade
Hi,
We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
Client not connected#
#1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
Properties: {passwd=?, lang=en, client=150,
Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
Thanks in advance,
Sarabjeet.Hi,
We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
on event trigger which was processed in the container they replace the script to the standard one. and it started working.
But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
So to your point to resolve compare the scripts in both standard and customized forms and do the same.
And also have a look at the SAP Note: 1109392
.... this is a temporary solution.....
Hope this helps.
Cheers-
Pramod -
Java node 'server0' terminated with exit code 2150 after JSPM patches
Dear Experts,
We want to install SAP Netweaver 7.3 EHP1.
After applying patches SP11 from JSPM utility we tried to restart the SAP Java instances from SAP MMC.
But it failed to start with error code :
*** LOG => SfCJavaVm: exit hook is called. (rc = 2150)
*** ERROR => Java node 'server0' terminated with exit code 2150.
*** To resolve the issue, we restarted machine, Database services, SAP services but it still did not start.
*** Let us know if you need any other trace file for debugging.
Below is the log file:
stdout log file:-
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:29 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.296: [GC2.296: [ParNew: 343552K->8912K(381696K), 0.0251348 secs] 343557K->8917K(2059008K), 0.0253589 secs] [Times: user=0.03 sys=0.03, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [32] ms
Loading [ClassLoaderManager]... [31] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [63] ms
Loading [ConfigurationManager]... [1624] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [547] ms
Loading [SessionManager]... [515] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 94 ms.
Resolve components for : 31 ms.
Load components for 969 ms.
Loading services.
Calculate startup service set for 266 ms.
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [62] ms / [0] CPU ms
Service [engine.dsr.facade] started. [62] ms / [0] CPU ms
Service [webservices] started. [62] ms / [0] CPU ms
Service [tc~je~security~api] started. [62] ms / [0] CPU ms
Service [tc~je~cross~api] started. [62] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [62] ms / [0] CPU ms
Service [r3startup] started. [62] ms / [0] CPU ms
Service [security.destination.facade] started. [62] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [62] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [110] ms / [0] CPU ms
Service [jmx_notification] started. [140] ms / [15] CPU ms
Service [cluster] started. [125] ms / [0] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [memory] started. [297] ms / [31] CPU ms
Service [timeout] started. [297] ms / [15] CPU ms
Service [userstore] started. [297] ms / [0] CPU ms
Service [tc~sec~destinations~provider] started. [344] ms / [171] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298078K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001518d3970, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be4038, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31907K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:46 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [188] ms
Substituted the values for [78] ms
Finished reading kernel objects for [266] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.406: [GC2.406: [ParNew: 343552K->8913K(381696K), 0.0187920 secs] 343557K->8919K(2059008K), 0.0190498 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[141] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [94] ms
Loading [ClusterManager]... [454] ms
Loading [LockingManager]... [47] ms
Loading [ConfigurationManager]... [1578] ms
Loading [CacheManager]... [78] ms
Loading [DatabaseManager]... [344] ms
Loading [SessionManager]... [296] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 78 ms.
Resolve components for : 16 ms.
Load components for 703 ms.
Loading services.
Calculate startup service set for 172 ms.
Service [webservices] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [r3startup] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [31] ms / [0] CPU ms
Service [tc~je~security~api] started. [47] ms / [0] CPU ms
Service [engine.dsr.facade] started. [47] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [47] ms / [0] CPU ms
Service [security.destination.facade] started. [47] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [47] ms / [0] CPU ms
Service [cluster] started. [62] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [62] ms / [0] CPU ms
Service [jmx_notification] started. [46] ms / [0] CPU ms
Service [runtimeinfo] started. [62] ms / [0] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [tc~sec~destinations~provider] started. [234] ms / [109] CPU ms
Service [timeout] started. [266] ms / [31] CPU ms
Service [log_configurator] started. [312] ms / [46] CPU ms
Service [userstore] started. [312] ms / [31] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298923K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001519a6a18, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be45b8, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31359K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [locking] started. [47] ms / [0] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:02 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [110] ms
Substituted the values for [93] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.297: [GC2.297: [ParNew: 343552K->9136K(381696K), 0.0230809 secs] 343557K->9142K(2059008K), 0.0233963 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [501] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1500] ms
Loading [CacheManager]... [125] ms
Loading [DatabaseManager]... [453] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 32 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [tc~je~security~api] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [15] CPU ms
Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [0] ms / [0] CPU ms
Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
Service [r3startup] started. [0] ms / [0] CPU ms
Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [32] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [32] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [15] CPU ms
Service [jmx_notification] started. [125] ms / [31] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [cluster] started. [109] ms / [0] CPU ms
Service [userstore] started. [156] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
Service [timeout] started. [235] ms / [31] CPU ms
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 275035K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 77% used [0x000000013fe70000, 0x000000015021acd0, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c1c238, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 29998K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [memory] started. [312] ms / [46] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:18 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [15] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [94] ms
Loading [PoolManager]... [16] ms
Loading [ApplicationThreadManager]... 2.267: [GC2.268: [ParNew: 343552K->9051K(381696K), 0.0218818 secs] 343557K->9057K(2059008K), 0.0221899 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[156] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1297] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [437] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 31 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [engine.lm.log.facade] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [0] CPU ms
Service [engine.dsr.facade] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [16] ms / [0] CPU ms
Service [r3startup] started. [32] ms / [0] CPU ms
Service [tc~je~security~api] started. [32] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [runtimeinfo] started. [47] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [0] CPU ms
Service [jmx_notification] started. [63] ms / [0] CPU ms
Service [cluster] started. [47] ms / [15] CPU ms
Service [timeout] started. [172] ms / [93] CPU ms
Service [userstore] started. [140] ms / [31] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 277992K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 78% used [0x000000013fe70000, 0x0000000150513298, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c06fd0, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 30982K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Thanks and Regards,
Muddassar KhanHi Muddassar,
Hope you are doing good.
A new note has been released exclusively for this issue. Please see:
note 1937296 - SUM fails at start-shadow-instance-dm step. This is not
an issue with the SCAs and more with the kernel employed.
You will need to make sure that you are on the latest kernel so that
this can be resolved.
The below links will help you if there are any queries with the
kernel update procedure
SAP Note No. 1636252 - Installing a 7.20 kernel in SAP Web AS
7.00/7.01/7.10/7.11
SAP Note No. 1629598 - SAP Kernel 720 will replace older
kernel versions
SAP Note No. 19466 - Downloading SAP kernel patches
Also check:
<http://scn.sap.com/docs/DOC-1206>
(for Manual Kernel Upgrade)
and
<http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11219>
(for kernel upgrade using JSPM)
Thank you and have a nice day!
Kind Regards,
Hemanth -
XMII content area not opening after Netweaver patch update.
Hi all,
Recently we upgrade Netweaver patches [few] from 7.3 SP7 to 7.3 SP9, after the patch update XMII is not show main content area, Header and links in the left panel are displayed but the main content area is blank.
Error Trace:
#2.0 #2014 07 14 13:32:16:540#+0300#Error#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#
##sap.com/xapps~xmii~ear#C0000A365209024C00000001000031D8#111421450000000004#sap.com/xapps~xmii~ear#com.sap.xmii.Illuminator.gui.homepage.HomePageBuilder#96221#353##1FCB79F10B4211E4BC70000006A4280A#f37849690b4111e4afb7000006a4280a#f37849690b4111e4afb7000006a4280a#0#Thread[HTTP Worker [@2100786422],5,Dedicated_Application_Thread]#Plain##
Error transfering attributes org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. #
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.AuthorizationChecker#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000017000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.AuthorizationChecker#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User 96221 does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:063#+0300#Error#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#
#NONE#sap.com/xapps~mpm~ear#C0000A365209024D00000019000031D8#111421450000000004#sap.com/xapps~mpm~ear#com.sap.xapps.mpm.interceptors.ExceptionHandlerInterceptor#96221#353#JTA Transaction : 57060#1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
com.sap.xapps.oee.ejb.exception.OEELocalizedException: User <USER_ID>does not have authorization to execute this service; user is trying to perform action read#
#2.0 #2014 07 14 13:32:31:079#+0300#Error#com.sap.tc.webdynpro.model.ejb.model#
#BC-JAS-EJB#tc~cm~ejb~api#C0000A365209024D0000001B000031D8#111421450000000004#sap.com/xapps~mpm~ui#com.sap.tc.webdynpro.model.ejb.model#96221#353##1FCB79F10B4211E4BC70000006A4280A#204e5c880b4211e4b3cb000006a4280a#204e5c880b4211e4b3cb000006a4280a#0#Thread[HTTP Worker [@15878578],5,Dedicated_Application_Thread]#Plain##
execute
Component and version:
Component
Version
ADSSAP
1000.7.30.0.0.20101020230400
AJAX-RUNTIME
1000.7.30.9.19.20140618151600
BASETABLES
1000.7.30.9.1.20140217143400
BI-WDALV
1000.7.30.7.2.20120925175200
CFG_ZA
1000.7.30.7.1.20120710234700
CFG_ZA_CE
1000.7.30.7.0.20120312160300
CORE-TOOLS
1000.7.30.9.15.20140609162300
DI_CBS
1000.7.30.9.0.20130217111100
DI_CLIENTS
1000.7.30.7.2.20120808174400
DI_CMS
1000.7.30.9.0.20130217111100
DI_DTR
1000.7.30.9.1.20130429184500
ENGFACADE
1000.7.30.9.3.20130731225200
ENGINEAPI
1000.7.30.9.13.20140514195200
EP-BASIS-API
1000.7.30.9.3.20131203022700
ESI-UI
1000.7.30.7.1.20120419061400
ESP_FRAMEWORK
1000.7.30.7.3.20121022202400
ESREG-BASIC
1000.7.30.7.2.20130915212500
ESREG-SERVICES
1000.7.30.7.0.20120312224700
FRAMEWORK
1000.7.30.9.6.20140312211900
FRAMEWORK-EXT
1000.7.30.9.11.20140510042200
J2EE-APPS
1000.7.30.9.8.20140513152200
J2EE-FRMW
1000.7.30.9.20.20140702194800
JSPM
1000.7.30.7.1.20131029203300
LM-CORE
1000.7.30.9.10.20140702194800
LM-CTS
1000.7.30.7.5.20121018185000
LM-CTS-UI
1000.7.30.7.0.20120312160500
LM-MODEL-BASE
1000.7.30.7.0.20120312170300
LM-MODEL-NW
1000.7.30.7.0.20120312170300
LM-SLD
1000.7.30.7.3.20130822180000
LMCFG
1000.7.30.7.7.20130211235800
LMCTC
1000.7.30.7.5.20120823193700
LMNWABASICAPPS
1000.7.30.9.7.20140528172400
LMNWABASICCOMP
1000.7.30.7.1.20120501171100
LMNWABASICMBEAN
1000.7.30.7.2.20130509173200
LMNWACDP
1000.7.30.7.0.20120312170300
LMNWATOOLS
1000.7.30.7.0.20120313005500
LMNWAUIFRMRK
1000.7.30.7.3.20131028182100
MESSAGING
1000.7.30.9.31.20140616191000
MII_ADMIN
1000.14.0.4.2.20140310045511
ODATA-CXF-EXT
1000.7.30.8.3.20130619172700
OEE_MII
1000.1.0.2.0.20140110094411
SAP-XI3RDPARTY
1000.7.30.0.0.20101021060500
SAPMECORE
1000.6.1.4.14.201405091456
SAPMECTC
1000.6.1.4.2.20140513105149
SAPMEINT
1000.6.1.4.9.20140513105113
SAPMEINTCTC
1000.6.1.4.2.20140411083601
SAPMELEGACY
1000.6.1.4.14.201405091456
SAP_BUILDT
1000.7.30.9.0.20130217101400
SECURITY-EXT
1000.7.30.7.5.20121008182800
SERVERCORE
1000.7.30.9.31.20140702194800
SOAMONBASIC
1000.7.30.9.1.20130626201800
SR-UI
1000.7.30.7.0.20120313005400
UDDI
1000.7.30.7.0.20120312224700
UISAPUI5_JAVA
1000.7.30.9.19.20140130141100
UMEADMIN
1000.7.30.7.7.20130515172000
WD-ADOBE
1000.7.30.7.0.20120312164400
WD-APPS
1000.7.30.9.0.20130217123000
WD-RUNTIME
1000.7.30.9.22.20140609172000
WD-RUNTIME-EXT
1000.7.30.9.0.20130217123000
WSRM
1000.7.30.9.0.20130217140200
XMII
1000.14.0.4.3.20140314030733
Are we missing patch updates?
Has anyone faced this issue, any help would be highly appreciated.
Thanks,Please see SAP Note 2040655 for this fix.
Regards, Steve -
After recent patch upgrade, BW delta Data loads for 2LIS_02_ITM failing
Hi All
We have patched our BW 3.5 system from 16 to 25. After updating patches, I am geetting delta load issues.
2lis_02_itm and 2lis_02_scl delta loads are taking long long time. Deltas are failing even for 3000 records . some time it is taking 14 hours . Delta loads are failing and I am getting below message. Please advise.
I am still getting below dump and i could not find any errors in
ST22. Please see below error.
Processing in Warehouse timed out; processing steps mising
Diagnosis
Processing the request in the BW system is taking a long time and the
processing step Update rules has still not been executed.
System response
<DS:DE.RSCALLER>Caller is still missing.
Procedure
Check in the process overview in the BW system whether processes are
running in the BW system under the background user.
If this is not the case, check the short dump overview in the BW system.
Thanks
PramodHello Pramod,
Is this load is to load to initial level ODS? If Yes I understand that you have issue in loading but not at activation of the ODS?
Normally this kind of issue comes during the activation of ODS.
1. If you are getting this during the data loads, then try to check loading only to PSA first and then from PSA to target? And check how much time that it's taking as this will help to track the issue whether its present in Source or in BW?
2. If the load is fine till PSA then try loading the same to ODS and then check whether this issue is present or not?
3. At the same you need to check the source side the system load and the number of processors which are available?
4. Did you perform the delta queue draining before the stack upgrade in R/3 or not? Normally as a pre-requisite this needs to be done if not then you will have issues in extracting the data!
5. Finally this can be avoided by having Initwithout data transfer and then performing the Delta loads. BUt for this need to first extract all the data from Source to BW and then take a down time in R/3 for few min and perform this activity so that the Init Timstamp will be reset properly and the Delta should work fine for you.
Do get back to us with more details.
Thanks
Murali M -
Ichat not working after recent Lion OSX update. What happened?
After installing todays update of Lion, my ichat does not work. It will not let me log in, only displaying "ichat cannot communicate with the account."
What recent update? The last Epson R220 update for non intel Macs was 08/19/10: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654 761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=13
What happens when you click on the EPSON Printer Utility which should be inside the Utility folder? Have you tried repairing permissions and restarting your computer? Have you read Epson's user manual and/or contacted their tech support?
I also have the R220 model. Besides using their drivers, I also use the Gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php -
Possible fix for Gmail not syncing after recent update
Hey all,
I've seen at least one person on the forums who's had issues with their Gmail not syncing after the latest update. I thought I would pass along my solution to the problem in case it worked for others. After I updated to the latest version of the iPhone software a couple of days ago, my mail accounts from Gmail were behaving strangely. For one thing, all of my saved e-mails on the iPhone were deleted. For another, it no longer received any e-mail from those accounts. Finally, I decided to test it out by creating a new e-mail account on my iPhone to sync with a disused Gmail address that I had not yet set up for IMAP on my phone. To my surprise, it worked perfectly! Then, after I checked the details of the new e-mail account with those of my existing accounts, I discovered that the incoming server port number was incorrect on the other accounts. It was 995 when it ought to have been 993. When I corrected the port numbers, all of the accounts synced perfectly. I hope that might work for someone else. It was at least worth a post on the forums, I figured. Have a wonderful St. Patrick's day, everyone!Fantastic! Worked a treat - thanks!
Lucy -
My imessage is not Working after recent update
My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?
It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.
-
Sounds with Buzz not playing after upload
Hi,
So I have a project that works fine testing in browsers but when I upload it I get no sound. I have the sounds saved in oog, mp3, and wav. The file structure is the same, buzz script is uploaded as well as the sounds folder. I did change the html file name to index.
Does anyone have any ideas on why the sounds wont play?
ThanksThanks for responding. Sorry I had forgoten the link.
http://briancschneider.com/zip/web
I'm not using edgecommons. I'm using buzz! for the sounds.
Checking other threads on sound was very helpful in getting the sound set-up. I've been unable to find a thread about sounds not playing after upload except certain formats not playing in some browser. That shouldn't be my issue since I have the sounds in multiple formats, but I'm obviously overlooking something so... -
Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
BrianIt is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
Not waking up after recent patches
I've been using my new iMac for over a month now, and it's wonderful.
One of the things I loved was that the sleep actually worked compared to my Windows machines.
Well after the last patches (iTunes and two other patches) that required a reboot, my iMac is behaving weird when I try to wake it up from sleep.
Going to sleep works fine, but when I try to wake it up, either using the mouse, keyboard, power switch or the remote, it acts like something has turned on (the sleep light goes out) but the screen never comes on.
Hitting keyboard functions doesn't do anything (i.e. I hear no click when changing the volume, disc eject doesn't work) and I've read the other posts about issues with USB devices, so I unplugged everything except my keyboard and mouse, but still the same results.
I REALLY liked having it sleep correctly, and I hope someone can tell me how to either fix it, or back out the patches from last week which seem to have triggered this.
ThanksWelcome to Discussions!
First, check that your firmware is up to date: http://docs.info.apple.com/article.html?artnum=303903
If so, typically your resolution should be either of these two:
SMC reset - this is simple, no risk, and should be repeated if not successful the first try. Many have reported using that a somewhat longer time period helped, but I think it's just a matter of the more tries the more chance of success:)
or
PRAM reset - simple, once is enough. A good real-time check on whether you've done it right: first set your iMac's sound level high or low and then listen to the sound level of the startup chord that sounds during the reset in comparison - the PRAM reset if successfull will reset the sound level to the default (mid-point).
To reset the PRAM:
1. Shut down the computer.
2. Locate the following four keys on the keyboard: Command (Apple logo), option, P, and R. You will need to hold these four keys down simultaneously in step 4.
3. Start up the computer.
4. Press and hold the Command-option-P-R keys. You must press this key combination after the startup chord sounds, but before the gray screen appears.
5. Hold all four keys down until the computer restarts and you hear the startup chord for the second time.
6. Release the keys.
Message was edited by: myhighway
Maybe you are looking for
-
I hooked my iPod touch (4th generation) up today and it said that there was new software to be downloaded so I downloaded it. Everything seemed fine but when it was complete it restarted and restarted and is continuing to keep restarting. Has been fo
-
Mail app and multiple pop accounts
I've just found a bug in the mail app. I tried to create a second mail account on the Touch. It all went well and saved fine, but when I went to look at my list of mail accounts they were all the same as the one I had just created. It seems that the
-
Need Help On Adobe Premiere elements 12
I have made a recording on my DVR and captured it onto my laptop with the Hauppauge capture device without a problem I have edited it with the Premiere elements but upon reviewing it it looks a little more pixilated than the original. What are the
-
User Response Error with BW prompts
Hello Experts, I have created WebI Report on top of BW query. All the prompts are coming from BW query. I was trying to create user response function but it's not working. Do I need to use special function or I can't use. Any help would be highly app
-
I would like to create my same account in my new computer
i would like to create my same account in my new computer