Opportunities with VK31/VK32/VK33

Hi,
Using transaction Vk31 and pricing report "Material price" I am trying to create a condition record for condition type ZPR0. However, trying to do that, the system issues an error "Table 004 is not defined for use with condition type ZPR0".
Is there any config possible to allow the system to accept condition type ZPR0 in transaction VK31?
Also, the pricing report behing "Material pricing" in trans VK31 is pricing report 15...is there any way to change this so that a different pricing report would be available?
Thanks,
Ola
Edited by: Ola Törnblom on Nov 30, 2009 4:24 PM

Hi,
When you enter the Condition record with transaction code VK31, (Conditions >> By material) you have enter the condition type; before entering your condition type (ZPR0) click F4 help; you will get a list of condition types. These are the only condition types accepted. If your condition type is not here means you will get the error: Table xxx is not defined for use with condition type ZPR0. To rectify this error first enter correct access sequence in the Condition type ZPR0. For example you can assign PR02 in the condition type ZPR0. Now you can able to enter the condition record for ZPR0 for material alone. Keep this condition type ZPR0 in the respective pricing procedure. Now you can get the pricing report under V/LD for materials when you enter 15. This was tested in IDES; it is working fine.
Regards,
K Bharathi

Similar Messages

Update sales opportunities with DTW

Hi Experts,
I am trying to update sales opportunities with DTW but get the error below even with a file as simple as:
RecordKEy;SequentialNo;OpportunityName
RecordKEy;SequentialNo;OpportunityName
1;17803;Anything
2;17892;Anything
3;17894;Anything
The Reason of the error:
"CServiceData::VerifyPropertyWrite failed: Property 'SequentialNo' of 'SalesOpportunities' is read onlyoSalesOpportunities"
Do you have any idea what may be wrong?

Dear Martin Kamau,
By SDK help, the Source table of SalesOpportunities Object is OOPR, and SalesOpportunitiesLines is OPR1.
In B1 application Sales Opportunity form, you could check which field need to set for OOPR and OPR1, you could refer to SDK help file also.
Best Regards
Jane Jing
SAP Business One Forums team

Importing Sales Opportunities with DTW

Hello,
I am trying to import the sales opportunities with the DTW, but I keep on getting the following error
potential amount is missing [OPR1.MaxSumLoc][Line: 1][Application defined or Object- definederroroSalesOpportunities]
I am using SAP 2007A patch level 47.
I have the following one line that I have been testing with, after my previous inputs failed. Please assist.
RecordKey 1
CardCode L1004
ContactPerson 2
Dataownershipfield 14
SalesPerson 4
Date 20090419
Status sos_Open
TotalAmountLocal 100.00
Edited by: Martin Kamau on Apr 19, 2009 6:57 PM

Dear Martin Kamau,
By SDK help, the Source table of SalesOpportunities Object is OOPR, and SalesOpportunitiesLines is OPR1.
In B1 application Sales Opportunity form, you could check which field need to set for OOPR and OPR1, you could refer to SDK help file also.
Best Regards
Jane Jing
SAP Business One Forums team

Opportunities with Products not pulling after recent patch

I have multiple opportunities with products and costs associated with them that are not pulling when I run a historical report.
For example:
I run a report on Thursday at 2:00 PM. I have a user who has modified an opportunity on Thursday morning. I understand my historical report pulls everything from the previous day (Wednesday) and prior. However, they only changed the closing date on the opportunity. They did not change anything about the product. The product has had a quantity and cost associated to it since creation (9/2/10). Just because they changed the closing date this automatically rejects the opportunity from the historical report?
My report is supposed to pull every opportunity with associated products and costs. It seems to be neglecting anything that was modified on the day it is ran.
Also, I should mention that the reason I am running a historical report is because the real-time report seemed to be doing the same thing. It wasn't including opportunities with products clearly associated to it. These opportunities would be included in a "opportunity - no product" report.
Thank you

Check that the currencies are set on both the header and products. There is a note about this in the R18 notes.

Opportunities with preceding documents

Hi,
for opportunities and activities we use the extractors 0CRM_OPPT_H and 0CRM_SALES_ACT_1 und update the documents in 2 different cubes. Both cubes contain among others the transaction number (0CRM_OBJ_ID), transaction type (0CRM_PRCTYP), user status (0CRM_USSTAT) and status profil (0CRM_STSMA).
Now we need to show in 1 report the opportunities with their preceding activities. In the opportunity cube we only have the GUID of the preceding documents, without transaction number or any further characteristics of the activities.
How can we show opportunities with their preceding documents in 1 report, both with transaction number, transaction type and status?
Thanks & regards
Doris

Check that the currencies are set on both the header and products. There is a note about this in the R18 notes.

OSO opportunities with future date not showing up

When you search organization and click on opportunites you can all the opportunities loaded with close date of 30jun2011 (fiscal year end) not the onles after this date.
How and where do I need to look for thsi set up update to display opportunites for next fiscal year.

I also don't know why these forums don't have an "iTunes store" section.
You mean like this? -> Using iTunes Store with Windows
or this ? -> Using iTunes Store with iTunes for Mac
It is the same regardless of what operating system you run your client on.
The actual store is the same though iTunes is slightly different, such as some of the options and key presses.
If someone were having problems, the first question I would ask is what computer and OS is being used.
If a question is posted in the *Using iTunes Store with Windows forum*, I won't need to ask.

Opportunities with volume changes

Our company has opportunities that can bring in revenue over several months, quarters, or even years. More often than not, a volume trend will be associated with the revenue.
Is there a way to properly forecast the volume changes within a particular opportunity, or do I need to have our sales team create a new opportunity each time the the unit volume adjusts?
For Example:
Opportunity XYZ:
Q1 2009 = 1000 units x $1 = $1000
Q2 2009 = 2000 units x $1 = $2000
Q3 2009 = 3000 Units x $1 = $3000
Q3 2009 = 1500 Units x $1 = $1500
Thank you in advnace for your help.

Thank you for the feedback. Yes the product revenue object will address my needs. However, its not very intuitive for the sales team to use. The opportunity has sales stage, the revenue has sales stage... they both have closed dates. Its somewhat of a mess to get people up to speed. I have found it much easier to not use the revenue object and keep it simple within the Opportunity details.

Job opportunities with Flex

We have an immediate need for a Sr. FLEX Developer with a
passion for
quality design. This is a CONTRACT POSITION for 6 months with
our
client in SAN JOSE, CA. In-Person interview is required after
a phone
interview.
Job Description:
Participate in the development of utilities and applications
to
support the development of audio/video streaming
applications.
Qualified candidate will be responsible for contributing
innovative
ideas on design architecture, interfaces, develop complex
modules.
Skills Required:
- At least 7-8 years of software development experience,
end-to-end
from design through supporting QA.
-Object oriented design and development
- Good team player, go-getter attitude
- Technology experience MUST haves: Flex, Flash, and
ActionScript
- Experience with Complex projects and developing RIA (Rich
Internet
Application)
Preferred - digital media/streaming project experience
- Very strong UI experience (both design and development)
- Good understanding of design patterns, multithreading and
client
server applications.
- Excellent written and verbal communication, team and people
skills.
- Shares information and communicates clearly to team members
and has
ability and skills to mentor junior team members.
If interested, please send me the recent resume along with
the
rate/hr, contact number and availability for a phone
interview.
Best Regards,
Raj Vemuri
[email protected]
Text
Job Description

Dear Ma’am,
Regarding the Lab view developer position , please find attached a copy of my resume for your consideration
Having worked within the industry for over 5+years, I have developed a wide range of skills that would meet, and exceed the expectations for the role.
In my present role as DESIGN ENGINEER for BHARAT FORGE I have had many achievements, including RADAR SIGNAL PROCESSOR & also GROUND RADAR BASE-BAND TRANS-RECEIVER SYSTEM using Lab View RF, DAQ , INSTRUMENT CONTROL,GPIB & Xilinx FPGA's
I would relish the opportunity to bring this level of success to your company. If you would like to get in touch to discuss my application and to
arrange an interview, you can contact me via [email protected] or mobile 9552283912.
I look forward to hearing from you soon.
Yours sincerely,
SURESH REPUDI
91-9552283912
[email protected]
Attachments:
SURESH REPUDI (5) (2).docx ‏46 KB

Opportunities with OneDrive Pro

Hello,
I have a few questions and hope that someone can help me with this:
How user administration works, and can I connect OneDrive Pro (for Business) to active directory? We can connect it with mobile devices?
How is it with storage? Is it everything in cloud or we need to have sql server?
Can OneDrive Pro repleace home/public folders?
What are advantages with onodrive pro (talking here about storage) if we compare it with home folders?

OneDrive for Business does use Active Directory credentials by virtue of requiring SharePoint 2013. There are OneDrive clients for Windows Phone, iOS, and Android, though if I recall correctly, the iOS and Android versions can only connect to Office 365.
OneDrive for Business either uses SharePoint Online (Office 365) or SharePoint on-premises for the data that it pulls (which uses SQL Server on the back end). Yes, it can replace home/public folders, depending on the content you hold there (SharePoint has
a limit of 2GB per file).
I think the advantages are more featureful file management and having your documents available from everywhere, unlike home folders which are often only available when you're on the network or VPN'ed in.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sales forecasting-updating opportunities with booked values

Hi,
we have a need where a user creates an opportunity for a large deal (say worth 6M USD) which will be realized over say 6 months. each month from the day the oppty is created say 1 MUSD worth orders will be created.
how do we incorporate this scenario in the monthly sales forecast. challenge here is that one opportunity will result into multiple orders each month. how will the sales forecast know that against the large deal of 6 MUSD, some amount is already realized/booked and it should subtract that amount from forecast report. need is to avoid double forecasting in such scenarios.
is there a standard report which takes care of such scenarios?
i am sure this is not a unique situation in almost all B2b sales this should be a need.
any pointers will be appreciated
thank you.

I referenced the post below.
http://social.msdn.microsoft.com/Forums/en-US/6f68404d-82f3-4df0-b5b9-00e353cbcf68/conditional-split-expression-evaluates-to-null?forum=sqlintegrationservices
it is not working for me. I don't understand the approach of using derived column to get rid of NULLs neither. Can you help?
Thank You Warmest Fanny Pied

Vk31 and vk32

Hi All
How does this linked with VK31, VK32 in FI tax codes.
Regards
Prasad

Hi Jyothi,
Thanx for your reply
But if we dont maitain Condition table for company code and maitain tax codes at FTXP what is the impact?
Regards
Prasad

Regarding Pricing condition

Hi Friends
I have a Question that I re determined pricing condition type Pr00 but it showing in Transaction Code vk11 only not showing in vk31 and if enter in vk31 manually the error is coming that the table 304 is not defined for this condition type what is it mean and why it is not coming in T code Vk31 Please give detailed answer ?

Hello,
Please take into consideration that the transactions VK31, VK32, VK33 and VK34 are running under a totally different logic than the transaction VK11 - VK14.
The logic doesn't work through condition tables, because of the fact that the condition sets can be selected by different types of conditions.
I know the error you are talking about. It is VK024. This occurs because only conditions that appear in the F4 dropdown list will work for you. If it's not there then you will get the error.

Problem with WT2007, SBO2005 and Opportunities

I am trying to synch opportunities between WebTools 2007 PL3 and SBO 2005 PL31 but every opportunity errors with the following error:
-5002:Potential amount is missing [OPR1.MaxSumLoc][line: 3]
   at NetPoint.SynchSBO.SBOObjects.SBOOpportunity.NetPointToSBO(NPQueueObject qData)
   at NetPoint.SynchSBO.SynchObjectBase.Synch()
When entering an opportunity there is no place to enter a value for Total Sale (it's displayed as $0.00) until a stage is added and then that value is displayed as the Total Sale instead. If I look in the Opportunity table there is a field for Amount which is 0 but even if I manually enter a value here I still get the same error.
Has anyone had a similar problem? Could it be a issue with WT and SBO2005 compatibility?
Steve

Problem Solved!
It turns out there was an opportunity linked to a Vendor in SBO which was failing in the synch because the Vendor BP did not exist in the WebTools database. This is the error raised by that problem:
SBO ContactPerson (OCPR) 1467 does not correspond to a NetPoint Users.UserID.
   at NetPoint.SynchSBO.SBOObjects.SBOOpportunity.SBOToNetPoint(SBOQueueObject qData)
   at NetPoint.SynchSBO.SynchObjectBase.Synch()
Once I forced the synch to skip this record the rest of the opportunities with this original error all synched to SBO. I'm not sure how or why this would affect the other opportunities but it must be related somehow.
I guess the lesson here is to resolve all previous errors, regardless of how unrelated they may seem before spending too much time on subsequent errors.
Steve

VK31 report

How to link the V/LD reports through VK31 transaction.
I created pricing condition report via V/LA and able to run it through V/LD. But my requirement is we should run the report through VK31 or VK32 / VK33 transaction. I tried to assign area menu COND_AV as well through assignment VK31. Am I missing some thing.
How to create report through VK31.
Please advise.

hi
as for as my understanding goes.
you want to linc the pricing report with condition type.
tae the name of report create new t.code fror V31 in the name of ZV31 and assign it and run.
or
hardcode in the program which you have created stating that when ever you are executing that program in SE38 or via t.code the values related to V31 should populate in the report.
or
go to V/LD tae the name of report & create a new t.code for the same and execute it.
or
please chec this program RV13A368 if it is help ful tae it other wise ignore it
note: mae sure for the above you are going to populate the values of V31.
regards
balajia

What is the difference between VK11 and VK31?

What is the difference between VK11 and VK31?
Thanks in Advance.
Nazim.

Hi,
They are the same really. VK31 came with a later SAP release and some
people say it is easier to use than VK11. In the end they are both used
for condition records.
Actually,the difference between VK11 and VK31 is that VK31,
VK32 ONLY work for standard SAP delivered Condition Types (ex.
PR00). If you create any customer specific Condition Type codes
(ex. ZXXX)you can only create / maintain Condition Records for
them using VK11, VK12.
In VK11 you can store condition record for more than one condition
type. This means you can have same condition record for different condition types.This feature is given to enhance the systems performance and not to create the duplication of the work for each condition type.
BOTH transactions allow mass entry and changes.
Regards,
Sophia Xavier

Opportunities with VK31/VK32/VK33

Similar Messages

Maybe you are looking for