Opportunities with volume changes

Our company has opportunities that can bring in revenue over several months, quarters, or even years. More often than not, a volume trend will be associated with the revenue.
Is there a way to properly forecast the volume changes within a particular opportunity, or do I need to have our sales team create a new opportunity each time the the unit volume adjusts?
For Example:
Opportunity XYZ:
Q1 2009 = 1000 units x $1 = $1000
Q2 2009 = 2000 units x $1 = $2000
Q3 2009 = 3000 Units x $1 = $3000
Q3 2009 = 1500 Units x $1 = $1500
Thank you in advnace for your help.

Thank you for the feedback. Yes the product revenue object will address my needs. However, its not very intuitive for the sales team to use. The opportunity has sales stage, the revenue has sales stage... they both have closed dates. Its somewhat of a mess to get people up to speed. I have found it much easier to not use the revenue object and keep it simple within the Opportunity details.

Similar Messages

Moving multiple tracks with volume changes

I'm sure this has been addressed but I can't find it here - I have multiple tracks in Garageband 9. I can move multiple tracks but any volume adjustments do not move with them. Is it possible to move tracks and volume adjustments together? For instance if I shorten the first track how can I move all the other tracks and volume adjustments related to those tracks at once without having to reset every volume curve point?

dcappe wrote:
Is it possible to move tracks and volume adjustments together?
http://www.bulletsandbones.com/GB/GBFAQ.html#lockautomation
(Let the page FULLY load. The link to your answer is at the top of your screen)

No notification for volume change on XFCE 4.8 with alsa

After clean arch x86_64 install with xfce4.8 desktop i cant get notification when i change volume on my Audigy4 soundcard. I used to have it on my old install and lastes package updates. I know xfce4-notifyd works since it notifies sond cange for example but not volume change either trough alsamicer or xfce4-mixer.

I give up an idea to install all these things from AUR, I downloaded instead packages from launchpad: xfce4-indicator-plugin, indicator-applet, indicator in versions that are oryginally in Xubuntu 11.04.
So compilling libindicator3 from sources just works fine, no problems accured.
But things got complicated when I was trying to install indicator applet, here is output:
configure: error: Package requirements (gtk+-2.0 >= 2.12
x11
libpanelapplet-3.0
indicator >= 0.3.22) were not met:
No package 'libpanelapplet-3.0' found
No package 'indicator' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables APPLET_CFLAGS
and APPLET_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
I've installed gnome-panel-3.0 but nothing helped with libpanelapplet-3.0 missing package, and also 'indicator' package is missing.. I don't know how to get it, I've got libindicator3 package installed..
My speculations are that problem accurs becouse Indicator in Xubuntu 11.04 using gtk 2.0 and Arch got gtk 3.0 on board.. But on the other hand whole Xfce 4.8 is gtk 2.0 and It's running both applications on 3.0 & 2.0. If I found a solution I'll post it here. Please post your ideas to solve this problem, I think it might be usefull for some people
EDIT: I've just managed to install libindicator3 and indicator-applet. Still fighting with xfce4-indicator-applet. It says that package 'indicator' is not installed.
EDIT: Finally! I have libindicator 0.3.22 and Xfce4-applet-plugin installed. But when I'm compilling indicator-applet I've got following error:
No package 'libpanelapplet-3.0' found
Last edited by mdarda (2011-09-08 10:10:50)

Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast

Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
I appreciate any and all input, thankyou.

I had to edit to reflect its Mavericks 10.9

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I was controlling it from the side. I thought that was kind of weird. If you want to see my problem, there will be a video up on Contemputech.com within a half-hour of me writing this.
Thanks!
Nolan

Hello everyone!
I'm hoping you are no longer having problems with your iPhone visual voice mail.
I can understand how frustrating it is to not be able to access such a great feature on your iPhone.
We did determine customers not being able to access Visual Voicemail on their iPhones.
Common errors are "visual voicemail is not available" or it just keeps loading the message.
(In the meantime, you can still review voicemail messages by dialing *86)
This issue should have been resolved for everyone effective 3/2/12.
Please let me know if you are still having problems with iPhone Visual Voicemail by sending me a direct message.
Thanks for your patience with this.
Tamara H.
Follow us on Twitter @VZWSupport

Opportunities with Products not pulling after recent patch

I have multiple opportunities with products and costs associated with them that are not pulling when I run a historical report.
For example:
I run a report on Thursday at 2:00 PM. I have a user who has modified an opportunity on Thursday morning. I understand my historical report pulls everything from the previous day (Wednesday) and prior. However, they only changed the closing date on the opportunity. They did not change anything about the product. The product has had a quantity and cost associated to it since creation (9/2/10). Just because they changed the closing date this automatically rejects the opportunity from the historical report?
My report is supposed to pull every opportunity with associated products and costs. It seems to be neglecting anything that was modified on the day it is ran.
Also, I should mention that the reason I am running a historical report is because the real-time report seemed to be doing the same thing. It wasn't including opportunities with products clearly associated to it. These opportunities would be included in a "opportunity - no product" report.
Thank you

Check that the currencies are set on both the header and products. There is a note about this in the R18 notes.

Wild volume changes thru Home Theater System

I have a Sunfire Theater Grand system hooked up by HDMI cable from DVR to HT. HDMI from HT to TV. Optical Audio from DVR to HT from HT to TV. For some reason I am getting large volume changes. It seems to be switching from stereo to Dolby Digital would be my guess. An easy example that really bugs me is that when i watch the local news the dolby digital comes through perfect then we go to national news and the audio I believe must go to stereo because the center channel is non existent. This also happens when watching shows and then a commericial comes on and blows you out of the house. Is there any way to have the audio transmit the same for all reception? I didnt have this problem with Dish Network. This is so frustrating.

Edvander wrote:
Acutally the audio is digital on all channels (not switching to stereo). It just has huge volume changes between programing and commercials. Pretty frustrating. Does anyone else have this problem?
There could be two issues at work. The first is how your receiver decodes and outputs DD2.0 vs DD5.1. The second is relates to the audio levels on the channels themselves, including whether or not the content is encoded with dialogue normalization
It is very common for channels to insert commercials at higher volume levels. Sometimes this is done on purpose, and other times it is a specific to the settings on the commercial insertion equipment and/or the encoded levels on the commercial source. Verizon passes most video and audio as is, so many of the differences you hear are due to the source content. On most channels, Verizon does not process and adjust the audio levels as DirecTV and Dish Network do.
You might check to see whether your processor has a dialogue normalization setting. Most Dolby Digital 5.1 programs are encoded with a dialogue normalization value, which is meant to equalize volume between DD5.1 encoded content on a particular channel. When this setting is enabled, it usually serves to reduce the volume levels on DD5.1 programs encoded with dialogue normalization, and then you may hear a volume spike when you are hit with commercials and other channels that are not encoded in that way. If dialogue normalization is already enabled on your receiver, you might disable it add and observe the difference on your system.
Some newer receivers do have a built-in audio adjustment feature (ex: Audyssey Dynamic Volume, Dolby Volume). This is meant to equalize the volume levels across different channels and sources, much like DirecTV does with their signals.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Help with volume and screen rotation.

Having trouble with volume and rotation. I have gone through the setting and made changes to lock screen and mute, but now it seems I have to choose between the two. The switch on the side also is not working. Any suggestions?

1. If Side Switch is set to Mute, check to make sure it's not muted
http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
2. Check the Volume buttons
http://i1224.photobucket.com/albums/ee374/Diavonex/6a787edc3564e00c2ca6b70d4f236 e8b.jpg
3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

Strange Audio Glitch With Volume Adjust

When I hit the volume keys on the keyboard to adjust the volume, there is a delay that I do not get when doing the same with my desktop system. There is also an audible click on the audio when the volume is adjusted. If I go to audio preferences and then use the same keys to adjust the volume, the click and delay goes away. When I leave audio preferences the problem is still fixed for at least awhile. Rebooting brings back the annoying click and delay and I think it comes back after awhile whether the computer is rebooted or not. I have experimented with turning the audible response to volume changes on and off and this has no effect on the problem other than the problem goes away because sound preferences have been opened to make the change and not because of what the setting is. I think the problem must have to do with the sound source being opened and closed whether the audible response is set or not. When sound preferences are opened, it's as if a different routine is being used when the volume keys are pressed and it continues to be used until that piece of code gets purged from RAM memory when it hasn't been used for awhile.
I'm just curious if anyone has this issue as well.

Ah, the ever popular "feature" explanation.
I can accept that it is a result of attempting to implement a feature but the way it is working on my machine indicates that this "feature" is poorly implemented.
Well designed computer programming anticipates users actions as best as possible and makes things work as best for the current situation. Most Apple programming is a perfect example of how to do this correctly. When I hit a key to change the volume, it's reasonable to think that there's a good chance that I will hit the key again because once might not change the volume sufficiently enough. Instead, what I get is the sound channel turning on and off for every key press, no matter how quickly I press the key. This happens even if I do not have an audible response selected. Should sound be turned on when there isn't any sound to be played? I don't think this should be necessary for changing the volume if you do not have an audible response set.
Now this is how I feel this should actually work:
Sound, when running from battery should be handled like a disk drive or a screen. If it is not used for a set amount of time then it should be turned off and turned back on only if it is needed again. Hitting the volume keys when no sound is playing might set a shorter time limit before the sound is turned off but the "on" time should be sufficiently long enough to hit a volume key again without requiring the sound to be turned off and on on each press.
Remember how I mentioned that the sound problem would go away, maybe even for days if I opened the sound preferences? This would indicate to me that under this situation, the sound is not actually being turned off after a reasonable amount of time. Under certain situations, it doesn't stay on long enough and others, it stays on too long. If I am right about it happening during sound playback, then it's really messing up by turning off and then on when it clearly doesn't need to.
I am pretty sure that I have had the issue while plugged into power and at least once while iTunes was playing. Certainly when sound is already playing this shouldn't occur. For some reason, I can't seem to get the issue to surface again, but I think that it just might take some time after rebooting sometimes for it to happen again. I will post more on this when it happens again.

Sudden volume change in a region

Hello all--
I am doing a piece that's quite repetitive, using 2-measure regions that I have repeated as needed doing option-drag. On one track, one region, and one only, has a huge volume jump; I'm talking about 10-12 db! I can't find anything to account for it. Velocities are all the same, nothing done in the mixer (though the volume change is registering loud and clear on the fader). Is there something I'm missing? I could dip the fader using automation for this region, but that's a workaround, of course, and besides, since I'm a relative newbie, I'd like to learn something if there's a more "elegant" solution.
Thanks in advance!
later,
John

Hi again--
I fixed the problem with a gentle hint from over on Dave's Logic Pro Help board. I had done a real Stupid Newbie Trick: accidentally dragged one region on top of another identical one, therefore intensifying it! Duhhh... Well, it might be good to have a way of seeing that's happened, since it doesn't show up in any obvious way in the Piano Roll Editor or the Event List. But I'm not excusing myself. Live, admit stupidity, learn... Onward and upward!
later,
John
PS Ben, there are more Tenneys than you might think! In fact, there's another John Tenney (my full name) who's also a musician! (not a professional violinist like me, but still...)

Does "Export all tracks as audio files" output HyperDraw volume changes?

Does "Export all tracks as audio files" output HyperDraw volume changes?
Thanks

I'm pretty sure it just collates all the Regions on each Track to give one file per Track. This would imply that automation would not be included.
To be certain, you could make up a quick Project with one Region & an automated fade, & see what happens; but I would bet you just get the audio, not the automation.

Volume change 'clicks'?

I've noticed that on few occasions after the 10.4.4 upgrade, my volume has behaved strangely, when changing it using the keyboard shortcuts -- the volume increases or decreases lags behind my keypresses, and my speakers emit a soft, percussive clicking noise as I make the changes.
At first I thought it had something to do with my processor load, but it seems to do it even during regular use. It seems to only happen when I'm running it off the battery -- on one occasion when I plugged it into AC power, the problem disappeared. It also seems to emit a single click every time I select Sound in my Preferences pane when I have the problem. Opening the Sound preferences also seems to temporarily relieve it of the laggy, clicking behavior. Again, this problem is intermittent, and the described Sound preference-click only happens when the volume change problem arises.
Anyone have any ideas? I don't really, besides that it might have something to do with 10.4.4 and battery power.

Mine clicks too, and has always done so. I think it's called positive feedback and is quite intentional. The volume of the clicks is in proportion to the volume setting, but other than when at a very low volume I wouldn't expect it to vanish even when plugged in. The laggy behaviour however, I'm sure that's intentional ! Are you running a heavy load of other programs? I don't use audio much so I'm probably not the right chap to try to figure out what's happening there. Do you have any other audio programs running that might have to be notified of a change in volume, thereby slowing things down?
Best wishes, Max

Random volume changes!

Hi,
The volume on certain tracks suddenly change without automation being present on the track... I've even caught the volume changing slightly and quickly while nothing is playing. (ie. track 13 for example would quickly be jumping from -6.1 to -2.4 while nothing is playing)
Has anyone esle seen this? It seems be to a bug that i've noticed since Logic 7.2 but its still happening with v8.
Any help appreciated!
Thanks

Is it possible you've got a midi controller assigned to track volume and it's causing the issue?

Opportunities with volume changes

Similar Messages

Maybe you are looking for