Opportunity save times out ...Large entries in PPFTTRIGG for this opportuni

Hello,
We are working on CRM Opportunities..
Editing the opportunity is possible, but when this opportunity is saved, it times out..
There are a set of these opportunities for whom it is timing out...
For these opportunities, there are a lot of entries in the table 'PPFTTRIGG' - actions table..
Trying to process the messages using the report 'RSPPFPROCESS' is timing out again for these opportunities
We have action definitions for opportunities (if opportunity has not been updated , opportunity expired etc ) to trigger email alerts ...which are sitting in the PPFTTRIGG table.
Do you know a workaround or a solution for enabling the saving of the above opportunities..
Any advise is greatly appreciated..
Thanks.
Regards,
Monica
Edited by: Monica Turner on Aug 16, 2011 11:10 AM

HI Monica,
You may skip determine of Actions for certain opportunities in the badi's like
CONTAINER_PPF
EVAL_SCHEDCOND_PPF
EVAL_STARTCOND_PPF
This is just an idea, i never tried this, May be you can explore in this angle.
-Satish

Similar Messages

Time manageru2019s workplace -No possible entries help available for this time

Hello Experts,
I am configuring time manageru2019s workplace.
I can insert an employee , I can see his detail, planed schedule of time, but I cant change its TIME ID it is showing there like ?03 ( No possible entries help available for this time data ID )
I have configured Time IDs also accordingly.
I used definition set SET_BE
And subsets P,Q,R
I created time data IDs A- Absence ,B- Avilability ,U-Leave
Please let me know where I am going wrong.
Thanks and Regards
Jaydeep Jadhav

Hi, 
Recheck all the nodes under TM->TMW. If you have maintained groups , please check them.
Also request the abaper to debug and find which query is failing.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

My Verizon iPhone 5 has very slow upload speeds that causes my apps to time out. Is anyone else experiencing this? It only happens on 4g.

My Verizon iPhone 5 has very slow upload speeds that causes my apps to time out. Is anyone else experiencing this? It only happens on 4g.

Then Restore your iPhone Firmware with iTunes on computer. See if better. If not, talk to Verizon and see if they know of the problem and if there is a fix. If not, then make Genius reservation and take iPhone to Apple for resolution under Warranty.

Pricing at time of goods receipt not possible for this item

We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
The error message is clear and reads:
Pricing at time of goods receipt not possible for this item
Message no. 06634
Diagnosis
For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
System Response
Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day. The problem without this is that the new pricing will not be reflected in the GR.
What is the solution to overcome this issue?
NOTE: the Info Record conditions are not being read during GR as the PO references a contract.

For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract.
I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

Time out error in production server for alv grid report

hi. i have developed alv grid report using nested select statments. when i testing in development server it is giving the output but in production server if i give 4 months then it is showing time out error.please help me out..its urgent.
Thanks in advance.

Hi Manu,
Don't use Nested selected statements.
Use the Following Performance Tuning Options that i have given below so that your problem can be solved.
1) Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2) Avoid for all entries in JOINS
3) Try to avoid joins and use FOR ALL ENTRIES.
4) Try to restrict the joins to 1 level only ie only for tables
5) Avoid using Select *.
6) Avoid having multiple Selects from the same table in the same object.
7) Try to minimize the number of variables to save memory.
8) The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9) Avoid creation of index as far as possible
10) Avoid operators like <>, > , < & like % in where clause conditions
11) Avoid select/select single statements in loops.
12) Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13) Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14) Avoid using ORDER BY in selects
15) Avoid Nested Selects
16) Avoid Nested Loops of Internal Tables
17) Try to use FIELD SYMBOLS.
18) Try to avoid into Corresponding Fields of
19) Avoid using Select Distinct, Use DELETE ADJACENT

Reward Points for sure if you find it useful. 
Regards
Babu

How to save password and username second time after pressing by mistake "never for this site" option when firefox asked to remember passwords for gmail for first time?

By mistake i pressed "Never for this site" when firefox first offered to remember my login details first time on gmail.com. Now how can i save my username and password for gmail.com. firefox no longer asks me to save any new login details... How can i re enable that notification to save passwords.

* Make sure that you not run Firefox in [[Private Browsing]] mode. In Private Browsing mode some menu items are disabled (grayed) and features like visited links and disabled and not available.
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
* Uncheck: [[ ] "Automatically start Firefox in a private browsing session"
See also [[Private Browsing|#Always_start_Firefox_in_a_private_browsing_session|Always start Firefox in a private browsing session]]

HT4623 My wi-fi on my iphone isn't working anymore, and its greyed out, is there a solution for this?

its been greyed out for a while now, and i cant in any way get my wi-fi on. does anybody know of any updates please?

http://support.apple.com/kb/TS1398
http://support.apple.com/kb/TS1559

For some reason I have a full page opening screen and cannot get it to go back to normal without restoring it to an earlier time. Is there a fix for this?

My computer would not start this morning, when it did start after repairs, I had a full screen and cannot get it to go back to normal. The toolbars don't show up, nor does the Firefox. I cannot get it straightened up without restoring it to an earlier time.

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Is bgRFC Out-Inbound the right way for this... ?

Hi guys,
my scenario is:
n systems (SAP) send data to ONE server (AS ABAP). The data will delivered via one and the same RFC FM to be stored in exactly ONE file per day.
I have to ensure quality of service and delivery.
So my first question is if bgRFC is the right way of doing so...
MY idea was: I have exactly ONE inbound queue name on server/central system to ensure, that there will be only one unit to write data into file at the same time...
Second: when the sender system calls one function module several times, how do I have to configure the queue names...
I'm facing problems regarding this (please see below)
the error occurs whenever the FM is called more than once per unit and I have only ONE inbound queue name declared...
(please see coding below)
Any ideas on that?
Best -
Christoph
coding example....
DATA:
 my_destination TYPE REF TO if_bgrfc_destination_outbound,
 my_unit TYPE REF TO if_qrfc_unit_outinbound,
 dest_name TYPE bgrfc_dest_name_outbound,
 queue_name TYPE qrfc_queue_name,
 dest_name = 'SID'.
 my_destination = cl_bgrfc_destination_outbound=>create( dest_name ).
loop... (to split XLarge amounts of data)
CALL FUNCTION 'MSGRECEIVER'
 IN BACKGROUND UNIT my_unit
exporting lt_data
endloop...
my_unit->add_queue_name_outbound( QUEUE_NAME = '<prefix>_OUT'
my_unit->add_queue_name_inbound( QUEUE_NAME = '<prefix>_IN'
 IGNORE_DUPLICATES = abap_true ).
Problem:
the error occurs, when more than one function module is called by the sender system... and having only ONE inbound queue name declared...
Edited by: Christoph Aschauer on Jul 28, 2011 1:08 PM

Start here to learn After Effects:
http://adobe.ly/AE_basics
This series of videos ends with exporting to H.264 (.mp4):
https://helpx.adobe.com/creative-cloud/learn/start/aftereffects.html

Time out on large procedure

Not sure if this is the right forum to bring this up as it doesn't primarily use the terrific wizard tools that come with portal, but I thought I would give it a try.
We have a stored procedure that generates a very large report for our customers. Basically an income statement/balance sheet. Anyway, we have found that there is a cut off point of how large of a report we can generate before the web browser times out. As a fix for this, we broke up the large procedure into two smaller procedures and have one dynamic page that is calling both. This is working, but I thought there was probably a better solution somewhere.
Has anyone else run into this issue and if so, is there another approach to the resolution that is better? I feel our solution is a bit of a hack and there has to be a better way.
Any suggestions/comments would be appreciated.

Batch mode in reports may be one option to consider.

Application session time out

Hello
i have an application deployed on weblogic 11. after 30mins the application session times out.
1.how can increase this time.
2. can this be done in weblogic since on the application side there is no configuration for the time out.
please assist me
Thanks

Hello;
On middleware the default should be 3600 seconds.
To change :
Login to the WebLogic Administration Console
Under domain structure click Deployments
Click on the "em" Enterprise Application
Click on the Configuration Tab
Set "Session Timeout (in seconds):" to 7200 ( or whatever you want )
Hit the Save button to save your changes in the deployment plan
I would make sure an idle timeout in not set in the database profile as well.
Best Regards
mseberg
Also worth a look :
How to Troubleshoot Oracle Fusion Middleware 11g OPMN Issues? [ID 1303000.1]
Edited by: mseberg on Oct 28, 2011 12:41 PM

Getting Time-Out at Select Query

Dear All,
I am getting Time-Out at particular Select Query.
This error i am getting since last 3 days, before it was working fine. And there is no any change made to program in last 3 days.
select a~qmnum
         matnr
         kunum
         iwerk
         spart
into    corresponding fields of iviqmel
from    ( qmih as a
           inner join qmel as b on b~qmnum = a~qmnum )
for all entries in i_tab
where qmart in ('FS', 'ZP')
       and iwerk   = i_tab-iwerk
       and matnr   = i_tab-matnr
       and kunum   = i_tab-kunum
       and spart   = i_tab-spart.
   append iviqmel.
endselect.
In Program table QMEL also using the proper Index.
Can you please give me any suggestion that how to come out from this issue.
Regards,
Dharmesh

Hi Rob,
I run the SQL Trace also, Query is using correct Index.
and I had also chenge the select query.
if not i_tab[] is initial.
    select a~matnr a~kunum a~spart
           b~qmnum b~iwerk
           into corresponding fields of table iviqmel
           from qmel as a inner join
                qmih as b
                on a~qmnum = b~qmnum
           for all entries in i_tab
           where a~qmart in ('FS', 'ZP')
             and a~matnr   = i_tab-matnr
             and a~kunum   = i_tab-kunum
             and a~spart   = i_tab-spart
             and b~iwerk   = i_tab-iwerk.
endif.
even its geving time out error.
Regards,
Dharmesh

Safari "time out" has been shortened... a fix?

Hi, Safari 3 seems to have shortened the length of time that it will wait for web pages, images, etc to load before it declares a "time out", compared to Safari 2. This was reported to be a problem in the beta phases, but the problem is certainly there in its current form on Mac OS 10.4.11 with Safari 3.0.4.
This is a problem for those of us on dial-up 56kbps connections, where webpages fail to load fully due to a whole host of "timed out" images, style sheets, etc, as reported in the Activity window. Safari 2 used to load pages just fine by just being a little more patient before giving up.
Is there a way of increasing the time out time for Safari 3? Obviously, getting a faster internet connection is not an option.

Yes, this is a pretty serious problem. It isn't just a problem with dial-up. I have a 384K DSL connection and see it all the time. It can also happen when loading from slow servers regardless of your Internet connection. I see it on pages with lots of image thumbnails coming from slow servers. I also see it when I load several pages at once (such as command-clicking on several links to open pages or full size images in separate tabs).
Under Safari 2.x, pages would load as best they could and either finish loading, or the images that failed to complete would still be partially visible. Under Safari 3.x, any image that doesn't load by a certain "time out" changes to a ? icon. Plus, in Safari 3.x, images that are partially loaded are displayed while trying to load, but then when it times out, the image is cleared and replaced with a ? icon. This is frustrating because often the image has loaded, but it's waiting for some "completion" flag to say the image was loaded, or maybe it's still loading a better quality version of the image, but the lower quality image is completely visible - until Safari 3.x erases it and replaces it with a ? icon.
Again, this isn't just a dial-up problem. It's a problem with loading any web page that takes too long - no matter what your connection. For example, this web site is a perfect example:
http://www.pixolator.com/zbc/featured2col.php
Another example are forum pages with lots of avatars and images in the messages. Because the images come from so many different sites, fast and slow, I often see only half the images. This link is a good example:
http://www.stickboyracing.com/stickforum/viewtopic.php?t=154&postdays=0&postorde r=asc&start=0
This is a pretty inexcusable error in Safari, and it has existed for over a year (ever since Safari 3.x was first released I believe). It has made Safari unusable for reading many forum pages, and accessing any web page with a large number of images or thumbnails.
The only solutions I've found are to use a different browser, or click on a link a couple times to reload the page without doing the equivalent of a "refresh" on the page so it loads images out of the cache the 2nd time I click on the link, and reloads those images that didn't work the first time.

Time out on Infoset

Hi,
Iam trying to display data of infoset; but it throws a dump saying 'Time out'.
Iam not sure why this is happening.
This infoset is using 8 DSOs and 1 master data table, having many left outer joins and equal joins.
Also one DSO is added twice so as to have a equal join to itself.
Does the infoset seems feasible? if it is why do we get time out dump.
Points will be assigned for all your views
Thanks
AP

Endless loop when displaying data flow BI 7.0 (SP 13)
SAP Note Number: 1035471
Symptom
If you use the 'Display Data Flow' context menu entry to display the data flow for an object in the Data Warehousing Workbench an endless loop occurs. This results in short dump TIME_OUT after a short period of time.
Other terms
Data Warehousing Workbench, DW Workbanch, data flow
"CL_AWB_OBJECT_NET_SAPGUI======CP"
CL_AWB_OBJECT_NET_SAPGUI======CP, SET_NODE_LEVELS,
CL_AWB_OBJECT_NET_SAPGUI======CM,
ISMP, TIMEOUT
Reason and Prerequisites
This problem is caused by a program error.
The data flow contains a transformation that is connected to an InfoSet or an emulated 3.x DataSource.
Solution
SAP NetWeaver 2004s BI
           Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions as an advance correction.
You must first read Note 875986, which provides information about transaction SNOTE.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. This composite SAP Note contains all corrections that refer to the SAP Note Assistant and prevent problems during the implementation. You must call transaction SNOTE again after you have implemented the composite SAP Note.
Header Data
Release Status Released for Customer
Released on 29.03.2007
Priority Correction with medium priority
Category Program error
Primary Component BW-WHM-AWB Administrator-/Data Warehousing Workbench
Release
Soft. Component Release Track From Release To Release And Successors
SAP_BW   70   700   700
SAP_BW   710   710   710
SAP_BW_VIRTUAL_COMP   70 710   700   700
Correction Instructions
Correction Instruction Valid from Valid to Installation Soft. Component ID
Ref. Correction Modification Status Last Changed on
0000878783 700 700 0120061532 SAP_BW_VIRTUAL_COMP 654
BR9K049585   Released 08.03.2007   17:36:07
Support Packages
Add to Basket Software Component Release Package Name Download
SAP_BW 700 SAPKW70013
SAP_BW 710 SAPKW71002
SAP_BW_VIRTUAL_COMP 700 SAPK-70014INVCBWTECH

CRM WEB UI - Time out Pop-up

Dear All,
We have a business requirement to monitor and optimize the CRM WEB UI timeout and other related issues.
I would like to have time-out pop-up for the call center agents and hence they could better manage the sessions .
This will avoid loosing the valuable customer data for the session and so on.
We are now working on the following threads with CRM Technical folks.
Please share your experience or the detailed steps if you had implemented already.
SAP note 1877120 - CRM-IC: session timeout issue with CRM 7 EHP1 and higher
Also , have a look http://scn.sap.com/community/crm/webclient-ui-framework/blog/2012/05/17/session-time-out-warning-message-on-ui
2092893 - Session Time Out Notification
Regards
Venkat

Hello Venkat,
For business roles of type IC Webclient, you have to implement SAP Note 1877120. Don't forget to update your view layout in your custom enhancement if you have enhanced CRMCMP_IC_FRAME/HiddenView.
After implementation of 1887120, also implement 1977631 and 1955366.
Best Regards,
Sigrid

Opportunity save times out ...Large entries in PPFTTRIGG for this opportuni

Similar Messages

Maybe you are looking for