Opration mapping issuse

when test the configuration test i am getting this error.
plz guide me.
MS

Which configuration step showing error?
Edited by: Dharamveer Gaur on Aug 23, 2010 8:30 AM

Similar Messages

Wrong Device Type Selected

This is a partial fix when a wrong device type is selected in the network map, either by you or Network Magic. The first step here was NOT done by me, but by "mbroadfo". He did an excellent job on figuring this out. There is a quicker and easier way however, once you do mbroadfo's work. This was his post under "Network Map Issuses Solved!:
09-22-201010:02 AM
I have been trying to figure out how to resolve a couple of issue with the Network Map in Cisco Network Magic (I have version 5.5.9195.0). The problem is that the device names and types I established initially don't get updated correctly in the map when my DHCP server assigns a new IP address. Network Magic does not seem to recognize the device by the MAC address and seems to put too much stock in the IP address (which is strange as DHCP is prevalent on most networks).
In order to re-initialize the network map, perform the following steps on ALL PC's running Network Magic:
1) Do not de-install Network Magic (it's not necessary unless you want more work)
2) Run: serveme.exe from "C:\Program Files\Pure Networks\Network Magic\Support\" (or wherever you installed Cisco Magic) - I created a shortcut so I can do this in the future without hunting around
3) Find the System Tray icon for serveme (it's a green dot surrounded by a white box)
4) Right click on the serveme icon and select:
- Stop NmService (the first item)
- Delete NetworkLib.xml
5) Repeat on ALL PC's running Network Magic
Once you have finished on ALL PC's, perform the following on each PC with Network Magic installed:
1) Right click on the serveme icon in the System Tray and select:
- Start NmService (the first item)
- Force First Run (the eleventh item)
- Exit ServeMe
2) Double-Click on Network Magic icon on the System Tray
3) Click the Link to restart the Network Magic Platform
4) Go through the initial startup steps per the instructions in the User Guide
5) Repeat on ALL PC's running Network Magic
Hope this helps!
Foot
The one problem that I kept having, was on one laptop in particular. Once I got all other PC’s correct, this one followed in suit. (I guess I should mention briefly, there are always at a minimum, 5 laptops, 2 desktops, 2 network drives, 3 network cameras, 1 network printer and 3 game consoles listed on the network map. More if friends come over.) You can see my dilemma if one of my device types change. One step left out by mbroadfo, if you have multiple computers with Network Magic on them, only have ONE connected to the network with a complete map at a time. If anything changes to the device type, all of the computers will change their device type and you will have to start all over again.
1. Leave all of your network devices turned on. Follow the steps above to disable Network Magic.
2. On one computer, follow the steps above to get Network Magic running again. Once you have a full map of all of your correct devices displayed, proceed to step 3.
3. Go to the following folder: C:\Users\All Users\Pure Networks\Platform
4. Copy this file: networklib.xml
5. SAVE THIS FILE somewhere in a folder where you know where it is. You could rename the copy to something like network.xml.temp
6. Go to the next computer, leaving the first PC running all the time on the network, and start Network Magic. Network Magic's network map should populate with the first PC's map. If anything changes, you can restore the xml file on the first PC. I'll explain this step later. Once the map is populated correctly, do the same thing on copying the "networklib.xml" file on the second PC, disconnect the second PC from the network or shut it down so its map cannot change. DO NOT copy the "networklib.xml" from the any PC to another thinking it is a short cut. Each "networklib.xml" file is specific to that PC. Move to the next PC and perform step 6 again until all PC's running Network Magic are done.
7. Once all PC's are done, they can all be brought back online and life should be great.
Now for the easier part. From this point on, if the map ever changes, simply exit Network Magic, open Task Manager and stop the nmsrvc, go to C:\Users\All Users\Pure Networks\Platform and delete "networklib.xml", copy your saved version of that file back to this folder and restart Network Magic. I know that the initial setup takes a while, but it is easier in the end if anything changes. I use the map and shares to access my cameras and network drives and if one of those changes to any type of computer, you cannot change the device type back. The software needs to have the same type of selection for all device types as when the "Network Device" in the drop down's is selected. I have just spent hours trying to get all of my devices set back to normal. I hope this will help some of you from repeated frustration when something changes.

Since I wrote the previous fix, I have had some other issues which forced me to correct several times, the Network Magic map. This was for the most part, letting other people have access to change the map. I have since put passwords in place to stop that. I have come up with a shorter way to do the fix that I suggested and found a possible flaw in the previous fix. I don’t know why or where this comes from, but on all of the computers that I have, NM has two different names for the process that runs. Two computers can both be 64 bit hardware and 64 bit OS and still have different process names. The following is what I am using now and works fine for me, but from what I am seeing no matter what software package, whether game or tool, each computer is so unique, the same problem may be on computers with two completely different fixes. Anyway, the following steps are what I am using now and works great on my systems. Hope maybe these steps will work on yours:
1.       Goto each computer and do the following steps in order. Right click on the Network Magic icon in the notification area of the task bar and exit Network Magic. Next, open Task Manager and click on the Processes tab. This is where NM uses two different names that I have seen: nmsrvc.exe or nmctxth.exe . Which ever process is running, end the process. Next, click on the Services tab. Scroll down until you find nmservice. Right click on nmservice and select Stop Service. Wait to make sure the Status column changes from Running to Stopped. It may take a few moments. If it does not stop or a message appears saying that the service cannot be stopped, click on the Services button at the bottom right corner. Scroll down on the Services window until you find Pure Networks Platform Service. Right click on the this and click on Stop. Again, wait until the status column changes from Started to Stopped. I have tried to just stop the service, but all of the steps above have to be done in order for this to work. This service is what communicates between this computer on all others running NM and tells them what is in the map. Leave this window open and proceed to step 2.
2.       Go to C:\Users\All Users\Pure Networks\Platform folder. Delete the file networklib.xml on all computers.
3.       Once step two is done, go back to the Services window and right click on Pure Networks Platform Service and click on Start. When the Status column changes back from Stopped to Started, click on your Network Magic icon to restart the program on one computer only. Watch to map to make sure it populates correctly. If not, you can simply delete the networklib.xml file at this point without having to stop the service again. The map should start over again from scratch. (John.h2h, see at the bottom of this for a possible area to look at for your issue.) Once the map is correct, goto the next computer and do step 3 again. If the map is correct, disconnect the second computer from the network and proceed on to the next computer. If it changes, you only have two computers maps affected and it is simpler to correct at this point. Once all computers have correct maps, bring all online and all should be great.
4.       As I stated in the previous fix, make a copy of the networklib.xml file on at least on computer and use that one as your map base. If the map should go awry, you can replace the file after all of the other computers NM services have been stopped and the networklib.xml file has been deleted.
This looks more complicated than it is and I hope this helps.
John.h2h, two things that you may want to look at, I use a Brother laser printer for a network printer. The port address changed for whatever reason on my system. I had to open the printer properties on each computer and change the IP address to the correct one and the printer worked fine. Another place to look, and if this is the problem, Network Magic is only following rules. Do you have any DHCP address reserved in your router. I have assigned blockes of IP’s to the different types of hardware. Example, all desktops are assigned from 192.168.1.100 to 192.168.1.109, laptops are from 110 to 129, cameras, network drives and printer are from 130 to 145, and game consoles are from 146 to 149. I know that Netgear has the ability to set these. If you do have it reserved, either delete this in your router or change it. If you reserve the address with the IP and Mac address that you want, make sure that your computer is set to obtain IP address automatically.
Good luck, denpag

Crackle issus with X-Fi/BF2/skype and Asus A8R32 deluxe

Hello,
i have a big problem with my X-Fi.
when i played solo battlefield 2, the card works great without any crackle issus. but if i connect to a friend with skype , i have big crackle when if the game load a map. its very terrible. i have record with a extern player. please hear it. sometime the sound brokes completly in battlefield. if the map loaded and i start the game , it takes a few minutes else the sound a normal. in this time i can not hear anyone with skype. whats wrong? i tried many things, new windows install, new driver, new bios, but nothing work. can everybody help me?
greeting marcus
http://people.freenet.de/BossXxX/VOC005.wav

[size="4" face="Comic Sans MS">Okay. Thanks for that guys. I hope these issues are sorted out for everyone soon. I'm going to update my system next year after Vista has a chance to settle in and mobo vendors and Creative have some time to sort out their various bugs.[size="4" face="Comic Sans MS">?[size="4" face="Comic Sans MS">Cheers

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

FileName in ABAP XSLT Mapping

Dear SDN,
In an integration scenario we are using sender File Adapter and a ABAP XSLT Mapping.
Is there any way to get the source FileName from such mapping. Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
regards,
GP

Thank you for your help,
I just try to access the adapter-specific attibutes using:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:variable name="filename" select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
</xsl:stylesheet>
but the following error raised:
<SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
have you had this situation?

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

How can I distinguish different action mapping in one ActionClass file?

I would like to create a ActionClass which will handle 3 mapping which comes from /add, /show or /del.
My question is how can I change the code so that the ActionClass servlet can distinguish the request from different url mapping ? Can anyone give me some short hints? Thx.
struts-config.xml
<action-mappings>
<action name="MemberInfoForm" path="/add" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/show" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/del" scope="request" type="com.myapp.real.MemberAction">
</action-mappings>MemberAction.class
public class MemberAction extends org.apache.struts.action.Action {
    private final static String SUCCESS = "success";
    public ActionForward execute(ActionMapping mapping, ActionForm form,
            HttpServletRequest request, HttpServletResponse response)
            throws Exception {
        return mapping.findForward(SUCCESS);
...

http://struts.apache.org/1.2.x/api/org/apache/struts/actions/MappingDispatchAction.html
http://struts.apache.org/1.2.x/api/org/apache/struts/actions/DispatchAction.html
Thank you so much for all of your suggestion.
I read the document of MappingDispatchAction and its note say:
NOTE - Unlike DispatchAction, mapping characteristics may differ between the various handlers, so you can combine actions in the same class that, for example, differ in their use of forms or validation.........
I wonder in DispatchAction, we can also have various forms or validation as MappingDispatchAction does, just by using different name in the action tag, for example:
<action input="/p1.jsp" name="MForm1" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p2.jsp" name="MForm2" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p3.jsp" name="MForm3" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">Hence, it is not the difference as stated from the NOTE, right?
Edited by: roamer on Jan 22, 2008 10:32 AM

How can I save to the same map every time when printing pdfs?

How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

Sensor Mapping Express VI's performance degrades over time

I was attempting to do a 3d visualization of some sensor data. I made a model and managed to use it with the 3d Picture Tool Sensor Mapping Express VI. Initially, it appeared to work flawlessly and I began to augment the scene with further objects to enhance the user experience. Unfortunately, I believe I am doing something wrong at this stage. When I add the sensor map object to the other objects, something like a memory leak occurs. I begin to encounter performance degradation almost immediately.
I am not sure how I should add to best add in the Sensor Map Object reference to the scene as an object. Normally, I establish these child relationships first, before doing anything to the objects, beyond creating, moving, and anchoring them. Since the Sensor Map output reference is only available AFTER the express vi run. My compromise solution, presently, is to have a case statement of controlled by the"First Call" constant. So far, performace seems to be much better.
Does anyone have a better solution? Am I even handling these objects the way the community does it?
EDIT: Included the vi and the stl files.
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:16 PM
Solved!
Go to Solution.
Attachments:
test for forum.vi ‏105 KB
chamber.zip ‏97 KB

I agree with Hunter, your current solution is simple and effective, and I can't really visualize a much better way to accomplish the same task.
Just as a side-note, the easiest and simplest way to force execution order is to use the error terminals on the functions and VIs in your block diagram. Here'a VI snippet with an example of that based on the VI you posted. (If you paste the image into your block diagram, you can make edits to the code)
Since you expressed some interest in documentation related to 3D picture controls, I did some searching and found a few articles you might be interested in. There's nothing terribly complex, but these should be a good starting point. The first link is a URL to the search thread, so you can get an idea of where/what I'm searching.You'll get more hits if you search from ni.com rather than ni.com/support.
http://search.ni.com/nisearch/app/main/p/q/3d%20picture/
Creating a 3D Scene with the 3D Picture Control
Configuring a 3D Scene Window
Using the 3D Picture Control 'Create Height Field VI' to convert a 2D image into a 3D textured heigh...
Using Lighting and Fog Effects in 3d Picture Control
3D Picture Control - Create a Moving Texture Using a Series of Images
Changing Set Rotation and Background of 3D Picture Control
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Numbers/Address Book and Google Maps

I would love to integrate my spreadsheet of addresses or my Address Book with Google Maps.
Is this possible? Somehow?
I take a lot of trips across the country and don't always know when I will be driving by my friends. But if I had a map I could glance at to see where they all are, I would know that I could schedule a lunch with a friend halfway or something like that.
I have heard about MapPoint, but don't know if there is anything like this that is free/affordable/non-MS.
Thanks!

Integrating in Numbers would not be automatic. You'd have to format links to assign to each address.
I've seen plug-ins to use Google maps with Address Book. Try a search on MacUpdate or VersionTracker for Address Book.
I think one of the features for Address Book in Leopard is integration with Google maps.

Mapping/invoking key codes in a GameCanvas's main game loop.

I'm trying to bind some diagonal sprite movement methods to the keypad. I already know that I have to map out the diagonals to key codes since key states only look out for key presses in the upper half of the phone (d-pad, soft buttons, etc...). Problem is, how do I invoke them in the main game loop since a key state can be encapsulated in a method and piped through the loop? What makes this even worst is a bug that my phone maker's game API (Siemens Game API for MIDP 1.0, which is their own implementation of the MIDP 2.0 Game API) has, in which if I override the keyPressed, keyReleased, or keyRepeated methods, it will always set my key states to zero, thus I can't move the sprite at all. Also, it seems that my phone's emulator automatically maps key states to 2, 4, 6, and 8, so my only concern is how do I map the diagonal methods into 1, 3, 7, and 9, as well as invoking them in the main game loop? Enclosed is the example code that I've been working on as well as the link to a thread in the Siemens (now Benq Mobile) developer's forum about the bug's discovery:
http://agathonisi.erlm.siemens.de:8080/jive3/thread.jspa?forumID=6&threadID=15784&messageID=57992#57992
the code:
import com.siemens.mp.color_game.*;
import javax.microedition.lcdui.*;
public class ExampleGameCanvas extends GameCanvas implements Runnable {
private boolean isPlay; // Game Loop runs when isPlay is true
private long delay; // To give thread consistency
private int currentX, currentY; // To hold current position of the 'X'
private int width; // To hold screen width
private int height; // To hold screen height
// Sprites to be used
private GreenThing playerSprite;
private Sprite backgroundSprite;
// Layer Manager
private LayerManager layerManager;
// Constructor and initialization
public ExampleGameCanvas() throws Exception {
super(true);
width = getWidth();
height = getHeight();
currentX = width / 2;
currentY = height / 2;
delay = 20;
// Load Images to Sprites
Image playerImage = Image.createImage("/transparent.PNG");
playerSprite = new GreenThing (playerImage,32,32,width,height);
playerSprite.startPosition();
Image backgroundImage = Image.createImage("/background2.PNG");
backgroundSprite = new Sprite(backgroundImage);
layerManager = new LayerManager();
layerManager.append(playerSprite);
layerManager.append(backgroundSprite);
// Automatically start thread for game loop
public void start() {
isPlay = true;
Thread t = new Thread(this);
t.start();
public void stop() { isPlay = false; }
// Main Game Loop
public void run() {
Graphics g = getGraphics();
while (isPlay == true) {
input();
drawScreen(g);
try { Thread.sleep(delay); }
catch (InterruptedException ie) {}
//diagonalInput(diagonalGameAction);
// Method to Handle User Inputs
private void input() {
int keyStates = getKeyStates();
//playerSprite.setFrame(0);
// Left
if ((keyStates & LEFT_PRESSED) != 0) {
playerSprite.moveLeft();
// Right
if ((keyStates & RIGHT_PRESSED) !=0 ) {
playerSprite.moveRight();
// Up
if ((keyStates & UP_PRESSED) != 0) {
playerSprite.moveUp();
// Down
if ((keyStates & DOWN_PRESSED) !=0) {
playerSprite.moveDown();
/*private void diagonalInput(int gameAction){
//Up-left
if (gameAction==KEY_NUM1){
playerSprite.moveUpLeft();
//Up-Right
if (gameAction==KEY_NUM3){
playerSprite.moveUpRight();
//Down-Left
if (gameAction==KEY_NUM7){
playerSprite.moveDownLeft();
//Down-Right
if (gameAction==KEY_NUM9){
playerSprite.moveDownRight();
/*protected void keyPressed(int keyCode){
int diagonalGameAction = getGameAction(keyCode);
switch (diagonalGameAction)
case GameCanvas.KEY_NUM1:
if ((diagonalGameAction & KEY_NUM1) !=0)
playerSprite.moveUpLeft();
break;
case GameCanvas.KEY_NUM3:
if ((diagonalGameAction & KEY_NUM3) !=0)
playerSprite.moveUpRight();
break;
case GameCanvas.KEY_NUM7:
if ((diagonalGameAction & KEY_NUM7) !=0)
playerSprite.moveDownLeft();
break;
case GameCanvas.KEY_NUM9:
if ((diagonalGameAction & KEY_NUM9) !=0)
playerSprite.moveDownRight();
break;
repaint();
// Method to Display Graphics
private void drawScreen(Graphics g) {
//g.setColor(0x00C000);
g.setColor(0xffffff);
g.fillRect(0, 0, getWidth(), getHeight());
g.setColor(0x0000ff);
// updating player sprite position
//playerSprite.setPosition(currentX,currentY);
// display all layers
//layerManager.paint(g,0,0);
layerManager.setViewWindow(0,0,101,80);
layerManager.paint(g,0,0);
flushGraphics();
}EDIT: Also enclosed is a thread over in J2ME.org in which another user reports of the same flaw.
http://www.j2me.org/yabbse/index.php?board=12;action=display;threadid=5068

Okay...you lost me...I thought that's what I was doing?
If you mean try hitTestPoint ala this:
wally2.addEventListener(Event.ENTER_FRAME, letsSee);
function letsSee(event:Event)
          // create a for loop to test each array item hitting wally...
          for (var i:Number=0; i<iceiceArray.length; i++)
               // if you don't hit platform...
          if (wally2.hitTestPoint(iceiceArray[i].x, iceiceArray[i].y, false)) {
          wally2.y -= 5;}
                      return;
That's not working either.

Key mapping Generator Tool

Scenario
One customer has two systems: System A and System B in his landscape. System A serves as the central server for item master data management. He maintains the same set of item master data in System B as that of System B manually. Now, the customer wants to use B1i to keep the item master data in System B automatically up to date as that in System A.
Use this tools to create the keys in the Bizstore.
Please read carefully the documentation before proceeding.
Lot of success,
Felipe

Hi all,
When running the tool I get an exception.
I have created a csv with all the cardcodes in it that need to be pushed. I have uploaded the tool to B1i. I've supplied the parameters and when I click execute the thing throws an exception.
Input path:
D:\B1i\Tools\Mapping Tool\Extracted\B1i2005PL05 or PL06\Reference\Common_BP.csv
Bizflow to execute:
/com.sap.b1i.datasync.keymapping/bfd/KeyMappingGeneration.bfd
Parameters: SenderSysId=0010000100,SenderObjectTypeId=B1.2005_BP,SenderKeyName=CardCode,SenderKeySelectionPath=BOM/BO/BusinessPartners/row/CardCode,ReceiverSysId=0010000102
Exception:
HTTP Status 500 - com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414)
What is wrong?
Kind regards,
Dwight

Key mapping

Hi All,
I have 3 fields in my source file Id,Category (Key Mapping) ,Name.
In Import Manager
I have mapped Remote Key field with ID .
Name with Name
category with Category Qualified Range (A 1-10)
I have source file like this
Id name category
11 10 A
In syndicator i have one more field Material Number .Mapped this with Material Number (should Get generated material Number )
Name with Name
Category with Category
Remote Key value with Material Number
After syndication I am getting Id values in Material Number .(Instead of 1 I am getting 11)
Can any one let me know the solution?

Got It . Should not Map Id field with the Remote key in Import Manager.

Key Mapping activates Versus Import Manager

Hello,
I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map.
Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping property,
I noticed that for each supplier ID in the Supplier table, a lot of remote keys were created. Previously I only had one remote key for each supplier and now I have a list of other supplier's ID. ( Existent or nonexistent supplier IDs). This becomes an issue for my import, because when I try to import a file where the supplier id does not exist in the MDM ( this scenario used to block my import and this is what a expect, as supplier is a key in my mapping), the system automatically maps that nonexistent supplier to other supplier.
Can you help me to understand if this is caused for the key mapping property ? Any Idea ?
Thank you very much
Luciana.

Hello Stanley,
The remote keys are form the same remote system.
My story is : When I am importing a file , suppose my file has an invalid supplier ID. ( this means this supplier is not in the lookup table Suppliers)
1)The import manager will give me a message such as : Map Supplier ID Values. This behavior was expected.
2)I decided to test the automap. The invalid supplier was not mapped to a different value. I am ok with that.
3)If the user ( dont ask me the reason ;-)) decides to map that invalid supplier ID to a different one, he/she is allowed to do so. I remember when the key mapping was not activated this option did not exist. The map and automap button was deactivated.
What I am trying to make sure is : a remote key will be created for invalid suppliers ONLY if I choose to map it with a different supplier ID.
Do you have any comments about it ?
Thank you very much
Luciana.

Opration mapping issuse

Similar Messages

Maybe you are looking for