Ops Center 12c Java API - Any tutorials?

I'm trying to figure out how to extract alert information from the Ops Center server, using the Java API. I have the API package installed, but other than the javadocs, I don't see any information on how to use it.
I found this, but the examples it gives aren't useful to me.
http://docs.oracle.com/cd/E26854_01/doc.121/e27511/apx_api.htm
Any pointers would be greatly appreciated!

... After some troubleshoot steps, we detected that the both OVM Managers has the same UUID (install 1rt OVM Manager and clone it to deploy the 2nd OVM Manager). Because this the Ops Center has problem to configure the second OVM Manager. To fix it the following steps were performed:
- uninstall OVM Manager
- remove file /etc/sysconfig/ovmm
- install OVM Manager
- import config (server pool, VM, etc...)
To prevent this issue (false job status), Ops Center could return a error in the discovery job saying that there is already another OVMM with same UUID...

Similar Messages

Oracle Enterprise Manager Ops Center 12c does not support RHEL 5.9 but did oracle have any plan to release patchs to support RHEL 5.9?

To Forum Users,
Below is my issue description:
OPS Center 12C is successfully installed & configured on RHEL 5.9 but post installation while trying to configure controller (enterprise & proxy) using http url it redirect to secure port https but doent promts login screen page. Later i found RHEL 5.9 O.S doen't support Ops center 12c.
Did oracle have any bug / patches for this issue ? or any planned release for / against this vulnerabilities ?

Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

Is there a way to schedule a report in Ops Center 12c on SMF services chang

We are looking for a way to report on Solaris SMF changes (needed for PCI DSS). for example: If telnet service is enabled or disabled.
We are using Enterprise Manager Ops Center 12c which alerts on SMF changes. but we would like to baseline the SMF enabled services and or run/schedule a report on which SMF service's are enable/disabled, compare host-A to host-B.
Enterprise Manager Ops Center 12c has the knowledge of all that. the question is, if we can generate a report with the SMF changes?
Thnaks,
-Eli

Hi David,
BI Service do not allow consumers to select the document instance they want their data from. You can only get the data from document latest instance (in case it is scheduled) or from the user instance in their inbox (in case document is published) from the two corresponding call input parameter (getFromLatestInstance and getFromUserInstance).
We are considering an improvement to allow consumers to select the document instance to use, but we are still in the process of gathering user feedback in order to implement this in the most convenient way (as we find challenging for consumers to know which instance are actually available when web service is called, and have them identify the one they request as well).
Any idea or feedback is welcome.
Regards,
David.

How to receive notifications from Enterprise Manager Ops Center 12c

Hi:
- I have a question.
Previous versions of Ops Center could forward notifications via JMX to users using:
OBJECT_NAME = "com.sun.xvm.services:type=NotificationService"
OPERATION_NAME = "getGeneratedNotificationsForUser”
assuming that at least one user is configured to receive the notification.
- I pointed jconsole against Ops Center 12c, but when I invoked the getGeneratedNotificationsForUser method,
Ops Center 12c did not forward any notifications.
- Has anyone else encountered this?
- Is this an Ops Center configuration issue?
- Is there another operation and object that can retrieve notifications ?
Edited by: 915352 on Feb 17, 2012 1:20 PM
Edited by: 915352 on Feb 17, 2012 3:55 PM
Edited by: 915352 on Feb 17, 2012 3:55 PM

Sorry, my morning coffe didnt kick in yet. Nevertheless if it will be available its gonna by on eDelivery most likely.
Edited by: Tommy.B on 2012-02-20 03:24

Ops Center 12c - discovery of OVM Manager fails

Ops Center 12c - discovery of OVM Manager fails
I am trying to discover OVM Manager and the OC job fails, I noticed that its trying to connected using port 54321 which only listens to localhost.
is there any way to change Ops Center discovery to use port 54322? I followed this process to enable port 54322 (port 54321 will only listen to localhost) http://docs.oracle.com/cd/E27300_01/E27308/html/vmiug-manager-tcps.html.
Thanks,
-Eli

Did you get an answer to this? I am in the similar situation

Does Ops Center 12c Release 1 PSU2 (update 2) work with T4 and solaris 11.1

From the release notes of Ops Center 12c Release 1 PSU2 (update 2)
Issues With Upgrading to Oracle Solaris 11.1
Oracle Solaris 11.1 is supported in Oracle Enterprise Manager Ops Center 12.1.2.0.0 but is not supported in prior versions of Oracle Enterprise Manager Ops Center. In addition, an issue with Oracle Solaris 11.1 prevents Oracle VM Server for SPARC management on Oracle SPARC T4 servers using the Oracle Solaris 11.1 OS. See the Oracle Enterprise Manager Ops Center Release Notes for more information.
Does any one know if there has been a fix for this yes

We were told this was actually a problem in OC not S11.1, and this was fixed in U2.
I know this contradicts with the other answer, but thats the info we received from Oracle.

Was Enterprise Manager Ops Center 12c released?

Was Enterprise Manager Ops Center 12c released? how can I get access to it?

Sorry, my morning coffe didnt kick in yet. Nevertheless if it will be available its gonna by on eDelivery most likely.
Edited by: Tommy.B on 2012-02-20 03:24

Ops Center 12c w/ OVM 3.1.1?

Is anybody successfully using Ops Center 12c with OVM 3.1.1?
The discovery of the OVM Manager is failing for me. Without the manager, it's difficult to manage the OVSs....
Rob

You will have to configure Secure TCP (TCPS) for Oracle VM Manager (Doc ID 1456338.1)
Your OVMM is listening on port localhost.localdomain:54321 it should be listening on *.54321.
The only way to get it working is to configure a secure TCPS. This will allow your OVMM to listen on *.54322
Remember when you add the OVMM asset select port 54322 and TCPS.
Good luck.

Install Oracle VM Server T4-4 from OPS Center 12c

Hello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1
Load Balancing Policy : L3                         VLAN ID: -
                                                                NICs: 2
                                                                         3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
                                                               LACP Mode: Active
                                                               LACP Timer: Short

Hello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1
Load Balancing Policy : L3                         VLAN ID: -
                                                                NICs: 2
                                                                         3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
                                                               LACP Mode: Active
                                                               LACP Timer: Short

Oracle OpenWorld and Ops Center 12c

When I was at Oracle OpenWorld two weeks ago, I could have sworn the Ops Center booth was running an unreleased version of Ops Center (to be 12c). If that is the case, what is the estimated release date of this product? And will it be like Oracle Enterprise Manager, and only run on Oracle Linux? Or is Ops Center 11g just being rebranded under the Enterprise Manager "12c" brand?

At Oracle OpenWorld, Oracle showed a preview of the next release of Ops Center plus the currently shipping version 11gR1. Oracle cannot discuss specific future release dates over public forums, but should you have a local Oracle account team servicing your company you can reach out to them and find out more information via the non-disclosure agreement process.
Ops Center works on Solaris (x86 and SPARC), Oracle Linux, and several RPM distributions of Linux. I will also note that Enterprise Manager 12c also works on a large variety of Operating Systems. We currently only see the Oracle Linux version downloadable because it is their release process to release Oracle Linux first and then follow up that release with additional downloads for the other Operating Systems in the weeks that follow.

Ops Center 12c - proxy disconnected status

Hi all,
I have managed to get Proxy Controller into a state that it does not like talking to Ops Centre itself, but keeps going offline after disconnected status.
sc-console list-connections
scn-proxy https://pylif:443 urn:scn:clregid:cf431fa8-f286-4f3d-bdb0-0a24711bf944:20120510101107529
scn-satellite disconnected
localhost https://localhost:443 urn:scn:clregid:4125756b-91bf-44ca-9b2c-712f9ccf6cab:20120420123155327
/opt/SUNWxvmoc/bin/proxyadm status
online
--->> after 10min it goes offline
/opt/SUNWxvmoc/bin/satadm status
online
I can review assets trough Ops Center normally, but all jobs fail since Proxy cannot be reached.
Any log files I could look into to get more hints on whats going on?
Best Regards,
Jukka

No failed SMFs.
svcs -a |grep scn
legacy_run May_07 lrc:/etc/rcS_d/S88SUNWscn-update-agent-prepare-singleuser
legacy_run May_07 lrc:/etc/rcS_d/S90SUNWscn-update-agent-singleuser
disabled May_07 svc:/application/scn/singleuser-agent:default
disabled May_07 svc:/application/scn/update-agent:default
disabled May_07 svc:/application/scn/db:remote
disabled May_07 svc:/application/scn/ec-server-splashpage:default
disabled May_07 svc:/application/scn/dhcpd:default
online May_07 svc:/application/scn/satellite-enable:default
online May_07 svc:/application/scn/oralistener:default
online May_07 svc:/application/scn/ajaxterm:default
online May_07 svc:/application/scn/oracle:default
online May_07 svc:/application/scn/db:local
online May_07 svc:/application/scn/db:default
online May_07 svc:/application/scn/uce-scheduler:default
online May_07 svc:/application/scn/uce-server:default
online May_07 svc:/application/scn/satellite-available:default
online 13:34:03 svc:/application/scn/proxy-enable:default
online 13:34:23 svc:/application/management/common-agent-container-1:scn-proxy
online 13:34:23 svc:/application/scn/proxy-available:default
All the services seem to be online as well. I checked the /var/svc/log's, which only show that services were either successfully started or stopped.

Can Ops Center forward or generate SNMP traps?

It's not clear to me what the enterprise controller for Ops Center 11g can do with SNMP traps. The Advanced User Guide says the EC can use "SNMP to discover assets" but that's about the most useful bit of information I can find. Can the EC receive and act on traps from agent hosts? Can it generate its own traps and send them on to a different managment host? If the EC can't do this by default, has anyone tried using any scripts?
Thanks,

the last answer I received was to use the plugin with Oracle enterprise manager grid control / cloud control.
what they didn't say, but it is in the documentation, is that only critical events are shared between ops center and oem. Yes you can see the database targets in ops center, and you can see the infrastructure targets in oem, but notification wise, only criticals. An of course you need to install both the OEM and the ops center agent on the target/asset. I have found that the plugin for ops center 12c and oem 12c doesn't actually send through any information at all, it will probably be fixed in update 1, but who knows.
There is a 3rd party product, Halcyon, that can apparently integrate with ops center. I think they wrote an api.

Provision M4000 with Ops Center

what're the steps to Provision Sparc M4000 with Ops Center 12c.
I want build server with new OS Solaris 11.2 then build zones

Absolutely, you can use Ops Center to deploy any 3rd party application, scripts, TAR/ZIP files, configuration files and pre/post action scripts. After uploading those as 'Local Content', you can either deploy them through "View/Modify Catalog" under each OS asset, or use OS profile to automate the deployment of multiple components together.
Please review the following document about Local Content:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_software_libraries.htm#BABEJICB
And how to use OS Update profiles:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_os_update.htm#OPCFG6169
Eran

Unable to activate ASR for an asset in Ops Center

While activating an asset in ASR it gets failed. There was a case opened with Oracle but they suggested to Re-install Oracle Ops Center . Is there any alternate method to solve this issue .
The problem was that a host was added a long time ago with another IP address and it was not removed . After chanign the IP it is unable to recognise the asset and activate ASR. Is there any option to remove the old conflicting entry of the asset .
Thanks/Regards
Mohammed Sadiq

Hello Mohamed,
This question is complex. There are 2 sides :
#1 one is the cleanup of the asset with wrong IP
#2 the other is the ASR activation problem
For issue #1 , to do the cleanup we need a jmxdump to understand the level of the cleanup that needs to be done. This would need to be worked in the case you have.
About the ASR issue #2, the activation fails because it is trying to activate a wrong formatted serial number
"ERROR The assets serial number ({0}) was not found in your CSI(s)"
So we would need more debug traces. I would suggest you create new SR if you don't have one already.
Please ask the SR owner to engage me if you want we discuss about it.
Regards,
Jean-Michel Quint
Ops Center Global Support Manager

Cookbook on how to create and attach networks to OVM for SPARC using OPS Center

I have a smallish installation of a number of SPARC T5-4s, T5-2s and T4-2s provisioned with OVM for SPARC and managed by OPS Center 12c2.
The OPS Center node is only connected to the ILOM/mgmt network, whereas the individual SPARC systems are connected to several other networks, some of which are VLAN tagged.
I am somewhat confused by the actions necessary to create these additional networks; I read the "how to"s however, I am still at a loss as to how to start. When I try to create a fabric, it wants a network. When I try to create a network, it wants a fabric.
Does anyone have a simple guide on how to add an additional network that I can then attach to my server pool?
Thanks

Hi 2682888
Look this Video Oracle Enterprise Manager Ops Center 12c Assigning Networks to a Network Domain
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation

Ops Center 12c Java API - Any tutorials?

Similar Messages

Maybe you are looking for