Ops center agents
We were recently told that in order to use Ops center to monitor our servers we would have to buy the ops center licenses for each server we want to monitor at $3000/server. Really? Ops center free but you can't do anything with it except admire it's interface?
Hi user8675293,
If you have a "Oracle Premier Support for Systems" (hw and sw contract) or "Oracle Premier Support for Operating Systems" (Solaris/sw contract), don't have any problem. You can download and use Oracle Enterprise Manager Ops Center to manage their covered Oracle systems at no additional cost.
More information on "Ops Center Everywhere Program"
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation"
Similar Messages
-
Can Ops Center forward or generate SNMP traps?
It's not clear to me what the enterprise controller for Ops Center 11g can do with SNMP traps. The Advanced User Guide says the EC can use "SNMP to discover assets" but that's about the most useful bit of information I can find. Can the EC receive and act on traps from agent hosts? Can it generate its own traps and send them on to a different managment host? If the EC can't do this by default, has anyone tried using any scripts?
Thanks,the last answer I received was to use the plugin with Oracle enterprise manager grid control / cloud control.
what they didn't say, but it is in the documentation, is that only critical events are shared between ops center and oem. Yes you can see the database targets in ops center, and you can see the infrastructure targets in oem, but notification wise, only criticals. An of course you need to install both the OEM and the ops center agent on the target/asset. I have found that the plugin for ops center 12c and oem 12c doesn't actually send through any information at all, it will probably be fixed in update 1, but who knows.
There is a 3rd party product, Halcyon, that can apparently integrate with ops center. I think they wrote an api. -
I have problem starting OPS Center services. Ops Center is not coming online as scn/repordb is in the maintenance state. svcadm clear scn/reportdb too doesnt work.
Did stop / start of agentadm, proxyadm and satadm server times, but no use. OCDoctor.sh is not reporting any specific error.
Any help is welcome.
legacy_run 9:52:56 lrc:/etc/rcS_d/S88SUNWscn-update-agent-prepare-singleuser
legacy_run 9:52:57 lrc:/etc/rcS_d/S90SUNWscn-update-agent-singleuser
disabled 9:52:51 svc:/application/scn/proxy-enable:default
disabled 9:56:49 svc:/application/scn/update-agent:default
online 9:58:12 svc:/application/scn/satellite-enable:default
online 9:58:17 svc:/application/scn/ajaxterm:default
online 10:26:02 svc:/application/management/common-agent-container-1:scn-agent
offline 9:52:51 svc:/application/scn/db:default
offline 9:52:51 svc:/application/management/common-agent-container-1:scn-proxy
offline 9:52:51 svc:/application/scn/console:default
offline 9:52:51 svc:/application/scn/uce-scheduler:default
offline 9:52:51 svc:/application/scn/uce-server:default
offline 9:52:51 svc:/application/scn/satellite-available:default
offline 9:52:51 svc:/application/scn/proxy-available:default
offline 9:52:51 svc:/application/scn/dhcpd:default
maintenance 9:54:58 svc:/application/scn/reportdb:defaultHi,
it's not really possible to analyze your problem with this level of information, whats the output of:
# svcs -xv
# svcs -l reportdb:default
# tail /var/svc/log/application-scn-reportdb:default.log
And did you try a restart the whole satellite:
# /opt/SUNWxvmoc/bin/satadm stop -w
# /opt/SUNWxvmoc/bin/satadm start -w
Have you already consulted Oracle support?
Regards,
Manuel -
404 browser error after installing Ops Center 12.1.1.2076
I have created a Solaris 10 x86 server and installed Ops Center 12.1.1.2076 fine on it. The embedded db is up and running and the ecadm service is starting fine. However when I go to a browser window to open the console page (https://opscenterserver:9443) it opens with a message http status 404 The requested resource () is not available. Oracle GlassFish Server 3.1.1.2.
I have ran OCDoctor --troubleshoot and get the following...
Ops Center Doctor 4.11 [OC 12.1.1.2076,SunOS10] [Read only] [19-Oct-2012 08:20AM BST]
======================== Checking Enterprise Controller... ==============================
OK: Total number of agents: 0
OK: Number of agents with inventories: 0
OK: Enterprise Controller requirements are met
OK: Files in /var/opt/sun/xvm/images/agent/ have the right permissions
OK: Files in /var/opt/sun/xvm/osp/web/pub/pkgs/ have the right permissions
OK: Found only 58 files in oracle/admin/OCDB/adump folder
OK: auth.cgi returns XML
OK: User 'oracleoc' home folder points to the right location
OK: User 'allstart' home folder points to the right location
OK: Apache logs are smaller than 2 GB
OK: n1gc folder has the right permissions
ec/12/check_sat_integrity_agent_link.sh: line 1: ../../agent/12/check_agent_integrity.sh: No such file or directory
OK: All Enterprise Controller packages are installed properly
OK: Enterprise Controller status is online
OK: the version is the latest one (12.1.1.2076)
OK: satadm timeouts were increased
OK: tar command was properly adjusted in satadm
OK: no 'conn_properties_file_name' value in .uce.rc
OK: Found the server .uce.rc
OK: Server .uce.rc has the correct file permissions
OK: Server .uce.rc has the correct ownership
ERROR: Could not access the KB public servers
Check the username and password and proxy configuration in "Administration" ->
"Edit Authentications" and "Change HTTP proxy"
Also, you may try the following command to test connectivity:
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --check-connectivity
OK: Grouplock file doesn't exist
OK: uce-server .uce.rc file points to a proper JAVA
OK: Disconnected mode is not configured
WARNING: Locales are set to "en_GB.ISO8859-1". This may cause issues when upgrading. Make sure you run:
# export LC_ALL=C
# export LANG=C
You can verify the settings by running:
# locale
OK: Found only one Solaris 11 agent bundle
OK: No partially installed packages
OK: 'public' folder has the right ownership
OK: 'public' folder is writable for uce-sds
OK: 'private' folder has the right ownership
OK: 'private' folder is writable for uce-sds
OK: No old jobs rerun (CR 6990675)
OK: No NCP encryption is used
OK: prtdiag doesn't hang
OK: This is not a T3 machine (if it was then a workaround may be needed)
OK: User uce-sds is part of all the proper groups
OK: 'update-saved-state' folder exists and has the right permissions
OK: No credential issues found
=========== Proxy controller is installed but not configured, skipping ==================
=========== Agent controller is installed but not configured, skipping ==================
Any ideas please?Try "http://opscenterserver" not "https" it will automatically redirect to htpps as below..
https://opscenterserver:9443/emoc/
帖子经 hgnan编辑过 -
Add existing OVM servers to Ops Center 11g?
We are turning an Ops Center 11g pilot project into production and we need help with our existing OVM Server for SPARC servers. We have a number of OVM 2.2 servers. When we discover them we don't see the VM asset showing in the "All Assets" list. Is there a way to discover the "Oracle VM Server for SPARC" asset that we can then add to virtual pools?
Thanks,Try this......
Also it shouldn't allow you to add such servers in an OVM Server for SPARC Server Pool.
Here a filter is missing in Ops Center: such servers shouldn't be proposed in the list of assets that can be added to a Server Pool, instead of allowing you to try it and then see an error that can't be understood.
To have a setup with servers that you will be able to add to Server Pools, and on which you will be able to create logical domains from Ops Center, you can either install these servers from Ops Center following the documentation at :
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_ovm_sparc_mgmt.htm#autoId11 "Installation of Oracle VM Server for SPARC"
or you can install manually the LDoms Virtualization Controller agent on an already installed server.
I think this is not documented for LDoms, the current documentation at http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13 "Installing Agent Controllers From the Command Line" will install a Zone Virtualization Controller Agent.
You should first uninstall the current Zone Virtualization Controller agent on your servers, running from the control domain :
$ /var/scn/install/uninstall
then I didn't do it yet manually on S11, I think it should be done as below if someone can confirm or provide the right procedure on S11. Otherwise I'm installing a s11 setup (with an MSR to sync that will take time) and could confirm tomorrow this manual procedure.
It should be similar as in http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13
except that the zip to download at step 4 it the IPS zip : OpsCenterAgent.SolarisIPS*.zip
then at step 7, you have to run "install -l -p <proxy IP address>" instead of "install -a"
This step will expect that the S11 version configured on this server matches the version in the MSR you defined in Ops Center.
and at step 10, before running the "agentadm configure..." command, you need to create a file providing network settings :
create a file /opt/sun/n1gc/lib/virtualController.properties with the following content that you should adpat to your host (here for example on my host smt4-24, with IP address 10.166.88.53)
xvmserver.appliancename=smt4-24
network.interface=net0
network.ipaddress=10.166.88.53
network.subnetmask=255.255.255.0
network.defaultgateway=10.166.88.1
then proceed to the agentadm configure command as described at step 10.
After this command has finished, you should have in Ops Center an OVM for SPARC with ldoms management capabilities, allowing you to add this asset to a Server Pool and create logical domains -
Ops Center 12c - proxy disconnected status
Hi all,
I have managed to get Proxy Controller into a state that it does not like talking to Ops Centre itself, but keeps going offline after disconnected status.
sc-console list-connections
scn-proxy https://pylif:443 urn:scn:clregid:cf431fa8-f286-4f3d-bdb0-0a24711bf944:20120510101107529
scn-satellite disconnected
localhost https://localhost:443 urn:scn:clregid:4125756b-91bf-44ca-9b2c-712f9ccf6cab:20120420123155327
/opt/SUNWxvmoc/bin/proxyadm status
online
--->> after 10min it goes offline
/opt/SUNWxvmoc/bin/satadm status
online
I can review assets trough Ops Center normally, but all jobs fail since Proxy cannot be reached.
Any log files I could look into to get more hints on whats going on?
Best Regards,
JukkaNo failed SMFs.
svcs -a |grep scn
legacy_run May_07 lrc:/etc/rcS_d/S88SUNWscn-update-agent-prepare-singleuser
legacy_run May_07 lrc:/etc/rcS_d/S90SUNWscn-update-agent-singleuser
disabled May_07 svc:/application/scn/singleuser-agent:default
disabled May_07 svc:/application/scn/update-agent:default
disabled May_07 svc:/application/scn/db:remote
disabled May_07 svc:/application/scn/ec-server-splashpage:default
disabled May_07 svc:/application/scn/dhcpd:default
online May_07 svc:/application/scn/satellite-enable:default
online May_07 svc:/application/scn/oralistener:default
online May_07 svc:/application/scn/ajaxterm:default
online May_07 svc:/application/scn/oracle:default
online May_07 svc:/application/scn/db:local
online May_07 svc:/application/scn/db:default
online May_07 svc:/application/scn/uce-scheduler:default
online May_07 svc:/application/scn/uce-server:default
online May_07 svc:/application/scn/satellite-available:default
online 13:34:03 svc:/application/scn/proxy-enable:default
online 13:34:23 svc:/application/management/common-agent-container-1:scn-proxy
online 13:34:23 svc:/application/scn/proxy-available:default
All the services seem to be online as well. I checked the /var/svc/log's, which only show that services were either successfully started or stopped. -
Importing SUN Explorer to OPS Center
Dears ..
I need to do a preventive maintenance for some of our customer , instead of manually looking into SRAS And Explominer o/p "As it takes time concluding report from both utilities plus they are
in-efficent to report" , can i use OPS Center to import captured explorers and analyze it ..
If so , does it cover all below items:
- H.W. faults .
- Major errors from logs for O.S. cluster , Mis-configuration
- Performance and resources utilization .
- Missing Critical patches/Withdrawn patches .Hi user12131976,
for passowrd and security questions please read the "Oracle® Enterprise Manager Ops Center Security Guide 12c Release 2 (12.2.0.0.0)" with attention at Section "1.1.7 -Authentication Between the Proxy Controller and Agents". Please read the "Security Features" and evaluate to create a "3.2.1.1 Using SSH Key-Based Authentication" process.
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation. -
OEM 12c OPS Center Installation issue : Error installing ipmitool - Help
Hi Experts,
I need your urgent help, I am trying since long to get this basic installation done for OEM 12c OPS Center. It is failing with below error :-
System Configuration : -
[root@test tmp]# uname -a
Linux test 2.6.18-128.el5PAE #1 SMP Wed Dec 17 12:02:33 EST 2008 i686 i686 i386 GNU/Linux
[root@test rda]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[root@test tmp]#
Ops Center Enterprise Controller Installer
(version 12.1.2.2161 on Linux)
1. Check for installation prerequisites. [Completed]
2. Check that required RPM packages are present. [Completed]
3. Configure file systems. [Completed]
4. Install prerequisite packages. [Completed]
5. Install Agent components. [Not Completed]
6. Create Deployable Proxy Bundles. [Not Completed]
7. Install application packages. [Not Completed]
8. Run postinstall tasks. [Not Completed]
9. Install IPMI tool. [Not Completed]
10. Set database credentials. [Not Completed]
11. Install and Configure Oracle Database. [Not Completed]
12. Seed Ops Center Database Schema [Not Completed]
13. Install Service container components. [Not Completed]
14. Install Core Channel components. [Not Completed]
15. Install Proxy Core components. [Not Completed]
16. Set Proxy database credentials. [Not Completed]
17. Install Enterprise Controller components. [Not Completed]
18. Install Update Connection - Enterprise. [Not Completed]
19. Install Ops Center BUI components. [Not Completed]
20. Install OS provisioning components. [Not Completed]
21. Initialize and start services. [Not Completed]
Failed Step: Install Agent components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
Installed oracle-hmp-tools-ubiosconfig.
utils/install_pkg -a -R /opt/sun/n1gc/pkgs -L /var/scn/install/install-log_12.1.2.2161_29050 i386/redhat5/ipmitool-1.8.10.4-1.el5.i386.rpm os=redhat osrel=5 arch=i386 rpmopts=--relocate root=/opt/sun/n1gc/pkgs
Error installing ipmitool.
24 packages installed.
1 package failed to install.
Errors were encountered; see log file for details.
Detailed installation log is at /var/scn/install/install-log_12.1.2.2161_29050. Symlink /var/scn/install/log was updated to point to it.
Uninstall using /var/scn/install/uninstall.
Error running Agent Controller installer: 1
Refer to /var/scn/install/log for more info.
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.5816.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x)Reinstalling version 2.2.3a-1.el5 of oracle-hmp-libs.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-libs-2.2.3a-1.el5.i386.rpm
policycoreutils-1.33.12-14.8.el5
Installation of oracle-hmp-libs, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools-biosconfig.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-biosconfig-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools-biosconfig, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools-ubiosconfig.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-ubiosconfig-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools-ubiosconfig, version 2.2.3a-1.el5 was successful.
ipmitool is not installed on the system, so installing it.
+rpm upgrade replacepkgs replacefiles nodeps root /opt/sun/n1gc/pkgs relocate i386/redhat5/ipmitool-1.8.10.4-1.el5.i386.rpm+
rpm: relocations must begin with a /
Error 1 installing ipmitool.
24 packages installed.
1 package failed to install.
Errors were encountered.
End Time: Sat Dec 8 05:57:14 IST 2012.
Error at ipmitool installation even though rpm is present -
Deploying software with Ops Center
Hi all,
OK, so Ops Center will provision an OS, patch the OS, and upgrade the OS, but is it also capable of deploying additional software after the OS is up and running ?
For example, packages for third party backup agents (TSM, Networker, Netbackup etc).
Basically, can I import non-OS packages into the software library, and create projects/plans to deploy those packages on remote hosts after the OS has been provisioned ?
Cheers,
GrahamAbsolutely, you can use Ops Center to deploy any 3rd party application, scripts, TAR/ZIP files, configuration files and pre/post action scripts. After uploading those as 'Local Content', you can either deploy them through "View/Modify Catalog" under each OS asset, or use OS profile to automate the deployment of multiple components together.
Please review the following document about Local Content:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_software_libraries.htm#BABEJICB
And how to use OS Update profiles:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_os_update.htm#OPCFG6169
Eran -
To Forum Users,
Below is my issue description:
OPS Center 12C is successfully installed & configured on RHEL 5.9 but post installation while trying to configure controller (enterprise & proxy) using http url it redirect to secure port https but doent promts login screen page. Later i found RHEL 5.9 O.S doen't support Ops center 12c.
Did oracle have any bug / patches for this issue ? or any planned release for / against this vulnerabilities ?Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
Ops Center Console V 11.1.0.1571 shows latest downloads as .1536
I installed a clean/fresh copy of Ops Center Enterprise Manager which showed me v11.1.0.1536 and the ran then downloaded and ran the console upate to bring the system to 11.1.0.1571. The issue I'm having is that when I'm in the console, click on "Ops Center Downloads" the downloads displayed are for 11.1.0.1536. If I check the "Show Older Updates" box I can see thre newer versions .1549, .1559, and .1571
The console is installed on Oracle Linux v 5.5
The original instal was performed using the .1536 package from e-delivery in a command shell
The .1571 update was installed using a download from e-delivery and applied in a command shell
It acts like the versioning database is out of sync.
When I attempt to deploy/push the proxy the ProxyProvPrecheck passes but the copy fails in ProxyProvProvision. Is that because the files aren't on the local system?
I have downloaded both the .1536 and .1571 versions using the console and the error continues. We tested (completely different system) with .1536 and the deployment worked.
Any ideas?
TIA!We decided to deploy the agent manually and discovered that the installer had several coding errors. For example, it stopped because it needed at least Solaris version 10u3 installed. The installed OS was 10u10....
I think that may have been the deployment issue.
The console issue has changed. Once I was able to installe the agent on the console the problem changed, noe the ops center downloads show.
Without Show Older Updates Checked
Ver .1571 SPARC. .1559 SPARC, .1549 SPARC, .1536 x86, .1536 SPARC, .1536 Linux x86
With the check it shows all 3 item of all 3 versions -
Performance report in ops center.
It is possible to create performance reports in ops center like PRM module in SunMC is doing for CPU Usage, Disk, Memory, Network.. etc.. ?
Thanks
AntonioHi Antonio,
You can also look at the Halcyon Neuron Performance Manager (http://www.halcyoninc.com/products/PerformanceManager/index.php). It hooks into Ops Center and/or SunMC to automate a lot of the reports (on top of what Ops Center provides out-of-the-box).
Note: I work for Halcyon, but part of my day job is also deploying and configuring Ops Center, so I hope this post is considered relevant.
Regards,
[email protected] -
Console redirection not working when ILOM is launched from Ops Center.
Hi,
I just installed Ops Center and added a few servers as assets. I'm having trouble to get console redirection when I start LOM Manager from within Ops Center.
If I point my browser and login directly to a server's ILOM web interface, I get console redirection without problems. If I do it through the "Start LOM Manager" option in Ops Center, I get an error message: "Cannot launch Java application" when I try to start redirection.
Is this normal behavior?
Thank you for your help.Do you mean the 'Launch LOM console" from Action pane? If so, check your java version on the PC/laptop you are accessing OC from.
What is your OC version?
I am not finding any issue in accessing the ILOM console. -
Install Oracle VM Server T4-4 from OPS Center 12c
Hello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1 Network: 10.8.0.0/14.1
Load Balancing Policy : L3 VLAN ID: -
NICs: 2
3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
LACP Mode: Active
LACP Timer: ShortHello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1 Network: 10.8.0.0/14.1
Load Balancing Policy : L3 VLAN ID: -
NICs: 2
3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
LACP Mode: Active
LACP Timer: Short -
Configuration issue with OPS Center installation on OEL 5 update 5
Hi,
I have installed OPS Center 11g on an OEL 5 update 5. All prereqs, i think, is met and installation gives no warnings or errors.
When I try to access the web page to run the configuration wizard. It hangs with the "LOADING" message, after logon. And nothing more happens.
In the bottom left corner of the browser i have the DONE message. But an error behind.
Detaljer om feil på webside
Brukeragent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.3)
Tidsstempel: Wed, 12 Oct 2011 10:17:24 UTC
Melding: Could not load 'dojo.nls.xvmdojo_nb-no'; last tried './nls/xvmdojo_nb-no.js'
Linje: 53
Tegn: 27
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/dojo.js
Melding: 'xvm.resourceBundle.jobManager' er null eller ikke et objekt
Linje: 406
Tegn: 40
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/xvmdojo.js?11.1.0.1536
I have removed the servername from the error.
How can i solve this? I saw no dojotoolkit installation as an prereq.
rgds, Kai
Edited by: user465755 on Oct 12, 2011 3:27 AMHello Kai,
I am not sure to completely understand your logs since they don't seem to be written in English but
could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
Lastly, you can check the prerequisites with
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
Cheers
Jocelyn
Maybe you are looking for
-
I didn't know I would have to add more. What I need to know is in the title. If all the tracks in a playlist are mp3 encoded, will iTunes assume that I want it to burn an mp3 disk? What I really want is a CD that plays in most CD players everywhere,
-
Error While addding a new datafile
Dear All, We have the tablespace PSAPUSER1D in one of our production systems,which is 100% full .I am trying to extend the tablespace using brtools,but i am unable to do it and it is giving the following error. BR0280I BRSPACE time stamp: 2007-11-05
-
Trying to get started.. but fumbling badly.
I just got my first MacBook Pro on monday (currently posting from it). I decided this morning that I wanted to register a .mac name and try it out for its free trial period. I went to system settings, clicked on the .mac icon, and typed in my newly c
-
Deluge: not showing anything BUT its transmitting!
Deluge all of a sudden just stopped showing my torrents and torrent data....I can tell its transmitting....but nothing in the gui.... here is some output File "/usr/lib/python2.6/site-packages/deluge/core/core.py", line 440, in get_filter_tree return
-
Help on table update - millions of rows
Hi, I am trying to do the following however the process is taking lot of time. Can someone help me the best way to do it. qtemp1 - 500,000 rows qtemp2 - 50 Million rows UPDATE qtemp2 qt SET product = SELECT product_cd FROM qtemp1 qtemp WHERE qt.quote