Ops Center Console V 11.1.0.1571 shows latest downloads as .1536

I installed a clean/fresh copy of Ops Center Enterprise Manager which showed me v11.1.0.1536 and the ran then downloaded and ran the console upate to bring the system to 11.1.0.1571. The issue I'm having is that when I'm in the console, click on "Ops Center Downloads" the downloads displayed are for 11.1.0.1536. If I check the "Show Older Updates" box I can see thre newer versions .1549, .1559, and .1571
The console is installed on Oracle Linux v 5.5
The original instal was performed using the .1536 package from e-delivery in a command shell
The .1571 update was installed using a download from e-delivery and applied in a command shell
It acts like the versioning database is out of sync.
When I attempt to deploy/push the proxy the ProxyProvPrecheck passes but the copy fails in ProxyProvProvision. Is that because the files aren't on the local system?
I have downloaded both the .1536 and .1571 versions using the console and the error continues. We tested (completely different system) with .1536 and the deployment worked.
Any ideas?
TIA!

We decided to deploy the agent manually and discovered that the installer had several coding errors. For example, it stopped because it needed at least Solaris version 10u3 installed. The installed OS was 10u10....
I think that may have been the deployment issue.
The console issue has changed. Once I was able to installe the agent on the console the problem changed, noe the ops center downloads show.
Without Show Older Updates Checked
Ver .1571 SPARC. .1559 SPARC, .1549 SPARC, .1536 x86, .1536 SPARC, .1536 Linux x86
With the check it shows all 3 item of all 3 versions

Similar Messages

Console redirection not working when ILOM is launched from Ops Center.

Hi,
I just installed Ops Center and added a few servers as assets. I'm having trouble to get console redirection when I start LOM Manager from within Ops Center.
If I point my browser and login directly to a server's ILOM web interface, I get console redirection without problems. If I do it through the "Start LOM Manager" option in Ops Center, I get an error message: "Cannot launch Java application" when I try to start redirection.
Is this normal behavior?
Thank you for your help.

Do you mean the 'Launch LOM console" from Action pane? If so, check your java version on the PC/laptop you are accessing OC from.
What is your OC version?
I am not finding any issue in accessing the ILOM console.

Ops Center - reportdb problem

I have problem starting OPS Center services. Ops Center is not coming online as scn/repordb is in the maintenance state. svcadm clear scn/reportdb too doesnt work.
Did stop / start of agentadm, proxyadm and satadm server times, but no use. OCDoctor.sh is not reporting any specific error.
Any help is welcome.
legacy_run 9:52:56 lrc:/etc/rcS_d/S88SUNWscn-update-agent-prepare-singleuser
legacy_run 9:52:57 lrc:/etc/rcS_d/S90SUNWscn-update-agent-singleuser
disabled 9:52:51 svc:/application/scn/proxy-enable:default
disabled 9:56:49 svc:/application/scn/update-agent:default
online 9:58:12 svc:/application/scn/satellite-enable:default
online 9:58:17 svc:/application/scn/ajaxterm:default
online 10:26:02 svc:/application/management/common-agent-container-1:scn-agent
offline 9:52:51 svc:/application/scn/db:default
offline 9:52:51 svc:/application/management/common-agent-container-1:scn-proxy
offline 9:52:51 svc:/application/scn/console:default
offline 9:52:51 svc:/application/scn/uce-scheduler:default
offline 9:52:51 svc:/application/scn/uce-server:default
offline 9:52:51 svc:/application/scn/satellite-available:default
offline 9:52:51 svc:/application/scn/proxy-available:default
offline 9:52:51 svc:/application/scn/dhcpd:default
maintenance 9:54:58 svc:/application/scn/reportdb:default

Hi,
it's not really possible to analyze your problem with this level of information, whats the output of:
# svcs -xv
# svcs -l reportdb:default
# tail /var/svc/log/application-scn-reportdb:default.log
And did you try a restart the whole satellite:
# /opt/SUNWxvmoc/bin/satadm stop -w
# /opt/SUNWxvmoc/bin/satadm start -w
Have you already consulted Oracle support?
Regards,
Manuel

404 browser error after installing Ops Center 12.1.1.2076

I have created a Solaris 10 x86 server and installed Ops Center 12.1.1.2076 fine on it. The embedded db is up and running and the ecadm service is starting fine. However when I go to a browser window to open the console page (https://opscenterserver:9443) it opens with a message http status 404 The requested resource () is not available. Oracle GlassFish Server 3.1.1.2.
I have ran OCDoctor --troubleshoot and get the following...
Ops Center Doctor 4.11 [OC 12.1.1.2076,SunOS10] [Read only] [19-Oct-2012 08:20AM BST]
======================== Checking Enterprise Controller... ==============================
OK: Total number of agents: 0
OK: Number of agents with inventories: 0
OK: Enterprise Controller requirements are met
OK: Files in /var/opt/sun/xvm/images/agent/ have the right permissions
OK: Files in /var/opt/sun/xvm/osp/web/pub/pkgs/ have the right permissions
OK: Found only 58 files in oracle/admin/OCDB/adump folder
OK: auth.cgi returns XML
OK: User 'oracleoc' home folder points to the right location
OK: User 'allstart' home folder points to the right location
OK: Apache logs are smaller than 2 GB
OK: n1gc folder has the right permissions
ec/12/check_sat_integrity_agent_link.sh: line 1: ../../agent/12/check_agent_integrity.sh: No such file or directory
OK: All Enterprise Controller packages are installed properly
OK: Enterprise Controller status is online
OK: the version is the latest one (12.1.1.2076)
OK: satadm timeouts were increased
OK: tar command was properly adjusted in satadm
OK: no 'conn_properties_file_name' value in .uce.rc
OK: Found the server .uce.rc
OK: Server .uce.rc has the correct file permissions
OK: Server .uce.rc has the correct ownership
ERROR: Could not access the KB public servers
Check the username and password and proxy configuration in "Administration" ->
"Edit Authentications" and "Change HTTP proxy"
Also, you may try the following command to test connectivity:
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --check-connectivity
OK: Grouplock file doesn't exist
OK: uce-server .uce.rc file points to a proper JAVA
OK: Disconnected mode is not configured
WARNING: Locales are set to "en_GB.ISO8859-1". This may cause issues when upgrading. Make sure you run:
# export LC_ALL=C
# export LANG=C
You can verify the settings by running:
# locale
OK: Found only one Solaris 11 agent bundle
OK: No partially installed packages
OK: 'public' folder has the right ownership
OK: 'public' folder is writable for uce-sds
OK: 'private' folder has the right ownership
OK: 'private' folder is writable for uce-sds
OK: No old jobs rerun (CR 6990675)
OK: No NCP encryption is used
OK: prtdiag doesn't hang
OK: This is not a T3 machine (if it was then a workaround may be needed)
OK: User uce-sds is part of all the proper groups
OK: 'update-saved-state' folder exists and has the right permissions
OK: No credential issues found
=========== Proxy controller is installed but not configured, skipping ==================
=========== Agent controller is installed but not configured, skipping ==================
Any ideas please?

Try "http://opscenterserver" not "https" it will automatically redirect to htpps as below..
https://opscenterserver:9443/emoc/
帖子经 hgnan编辑过

Ops Center 12c - proxy disconnected status

Hi all,
I have managed to get Proxy Controller into a state that it does not like talking to Ops Centre itself, but keeps going offline after disconnected status.
sc-console list-connections
scn-proxy https://pylif:443 urn:scn:clregid:cf431fa8-f286-4f3d-bdb0-0a24711bf944:20120510101107529
scn-satellite disconnected
localhost https://localhost:443 urn:scn:clregid:4125756b-91bf-44ca-9b2c-712f9ccf6cab:20120420123155327
/opt/SUNWxvmoc/bin/proxyadm status
online
--->> after 10min it goes offline
/opt/SUNWxvmoc/bin/satadm status
online
I can review assets trough Ops Center normally, but all jobs fail since Proxy cannot be reached.
Any log files I could look into to get more hints on whats going on?
Best Regards,
Jukka

No failed SMFs.
svcs -a |grep scn
legacy_run May_07 lrc:/etc/rcS_d/S88SUNWscn-update-agent-prepare-singleuser
legacy_run May_07 lrc:/etc/rcS_d/S90SUNWscn-update-agent-singleuser
disabled May_07 svc:/application/scn/singleuser-agent:default
disabled May_07 svc:/application/scn/update-agent:default
disabled May_07 svc:/application/scn/db:remote
disabled May_07 svc:/application/scn/ec-server-splashpage:default
disabled May_07 svc:/application/scn/dhcpd:default
online May_07 svc:/application/scn/satellite-enable:default
online May_07 svc:/application/scn/oralistener:default
online May_07 svc:/application/scn/ajaxterm:default
online May_07 svc:/application/scn/oracle:default
online May_07 svc:/application/scn/db:local
online May_07 svc:/application/scn/db:default
online May_07 svc:/application/scn/uce-scheduler:default
online May_07 svc:/application/scn/uce-server:default
online May_07 svc:/application/scn/satellite-available:default
online 13:34:03 svc:/application/scn/proxy-enable:default
online 13:34:23 svc:/application/management/common-agent-container-1:scn-proxy
online 13:34:23 svc:/application/scn/proxy-available:default
All the services seem to be online as well. I checked the /var/svc/log's, which only show that services were either successfully started or stopped.

Performance report in ops center.

It is possible to create performance reports in ops center like PRM module in SunMC is doing for CPU Usage, Disk, Memory, Network.. etc.. ?
Thanks
Antonio

Hi Antonio,
You can also look at the Halcyon Neuron Performance Manager (http://www.halcyoninc.com/products/PerformanceManager/index.php). It hooks into Ops Center and/or SunMC to automate a lot of the reports (on top of what Ops Center provides out-of-the-box).
Note: I work for Halcyon, but part of my day job is also deploying and configuring Ops Center, so I hope this post is considered relevant.
Regards,
[email protected]

Install Oracle VM Server T4-4 from OPS Center 12c

Hello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1
Load Balancing Policy : L3                         VLAN ID: -
                                                                NICs: 2
                                                                         3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
                                                               LACP Mode: Active
                                                               LACP Timer: Short

Hello,
I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
the process is never execute. From the cisco switch all is well done for aggregate the port.
I have the following messages just after the first reboot.
Is there a DOC or any idea will be appreciate.
Thank's for help
Willy
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a File and args: -Z rpool/ROOT/solaris
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Loading smf(5) service descriptions: 205/205
WARNING: svccfg apply /etc/svc/profile/site failed
Configuring devices.
Loading smf(5) service descriptions: 2/2
Warning: Unable to verify add of static route on net2/v4
Error code = 145
Hostname: ddom12
Here is my profile to aggregate.
Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1
Load Balancing Policy : L3                         VLAN ID: -
                                                                NICs: 2
                                                                         3
MAC Address Policy: Fixed - Use Mac address of a specific NIC: 2
                                                               LACP Mode: Active
                                                               LACP Timer: Short

Configuration issue with OPS Center installation on OEL 5 update 5

Hi,
I have installed OPS Center 11g on an OEL 5 update 5. All prereqs, i think, is met and installation gives no warnings or errors.
When I try to access the web page to run the configuration wizard. It hangs with the "LOADING" message, after logon. And nothing more happens.
In the bottom left corner of the browser i have the DONE message. But an error behind.
Detaljer om feil på webside
Brukeragent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.3)
Tidsstempel: Wed, 12 Oct 2011 10:17:24 UTC
Melding: Could not load 'dojo.nls.xvmdojo_nb-no'; last tried './nls/xvmdojo_nb-no.js'
Linje: 53
Tegn: 27
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/dojo.js
Melding: 'xvm.resourceBundle.jobManager' er null eller ikke et objekt
Linje: 406
Tegn: 40
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/xvmdojo.js?11.1.0.1536
I have removed the servername from the error.
How can i solve this? I saw no dojotoolkit installation as an prereq.
rgds, Kai
Edited by: user465755 on Oct 12, 2011 3:27 AM

Hello Kai,
I am not sure to completely understand your logs since they don't seem to be written in English but
could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
Lastly, you can check the prerequisites with
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
Cheers
Jocelyn

Unable to activate ASR for an asset in Ops Center

While activating an asset in ASR it gets failed. There was a case opened with Oracle but they suggested to Re-install Oracle Ops Center . Is there any alternate method to solve this issue .
The problem was that a host was added a long time ago with another IP address and it was not removed . After chanign the IP it is unable to recognise the asset and activate ASR. Is there any option to remove the old conflicting entry of the asset .
Thanks/Regards
Mohammed Sadiq

Hello Mohamed,
This question is complex. There are 2 sides :
#1 one is the cleanup of the asset with wrong IP
#2 the other is the ASR activation problem
For issue #1 , to do the cleanup we need a jmxdump to understand the level of the cleanup that needs to be done. This would need to be worked in the case you have.
About the ASR issue #2, the activation fails because it is trying to activate a wrong formatted serial number
"ERROR The assets serial number ({0}) was not found in your CSI(s)"
So we would need more debug traces. I would suggest you create new SR if you don't have one already.
Please ask the SR owner to engage me if you want we discuss about it.
Regards,
Jean-Michel Quint
Ops Center Global Support Manager

How do I configure a basic LDAP to work with OPS Center?

I have Solaris 11 and have configured it a few ways with LDAP. The last setup I used Directory server with a proxy then added LDAP configs. I am having problem getting the clients working correctly but first I need to know if I can just configure LDAP without DSEE and allow OPS Center to control the users?
Chapter 9 of the Oracle Solaris Administration guide says DSEE is recommended but not required and points you to chapter 14. But I have been unable to figure out how to create the DN and Bind PW prior to configuring LDAP with IDSCONFIG. The OPS Center server is already in play so if configured correctly I should be able to talk to the LDAP server.
Does anyone know what set I am missing or whether it can be done without DSEE?

After contacting Oracle I was informed that there Documentation is misleading and that DSEE is required.
From Oracle
"The statement "However, while using the Oracle Directory Server Enterprise Edition is recommended, it is not required", does not mean you can configure the Solaris native ldap client without a Directory Server. What the statement means is the Solaris native ldap client is not required to use the Oracle Directory Server, it is recommended, but the Solaris native ldap client can be setup to work with third party Directory Servers. The term "not required" is a reference to the use of the Oracle Directory Server vs a third party Directory Server."
The documentation does not state that Directory Server of any kind is required.

OPs Center Release supporting Solaris 11 provisioning

hi all
Does anybody know when comes the Ops Center release supporting the provisioning of Solaris 11 ?
kind regards
Sven

In the next release of Ops Center you can provision Solaris 11 via an excellent integration with Solaris Automated Installer. To find out more information about future products from Oracle, please contact your local sales or service representative.

Provisioning Solaris 11 with Ops Center

The current release of Ops Center 11g does not support provisioning of Solaris 11 (Express).
Is it planned that future releases of Ops Center support the provisioning of Solaris 11 ?
Sven

Hello Kai,
I am not sure to completely understand your logs since they don't seem to be written in English but
could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
Lastly, you can check the prerequisites with
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
Cheers
Jocelyn

Is there a way to schedule a report in Ops Center 12c on SMF services chang

We are looking for a way to report on Solaris SMF changes (needed for PCI DSS). for example: If telnet service is enabled or disabled.
We are using Enterprise Manager Ops Center 12c which alerts on SMF changes. but we would like to baseline the SMF enabled services and or run/schedule a report on which SMF service's are enable/disabled, compare host-A to host-B.
Enterprise Manager Ops Center 12c has the knowledge of all that. the question is, if we can generate a report with the SMF changes?
Thnaks,
-Eli

Hi David,
BI Service do not allow consumers to select the document instance they want their data from. You can only get the data from document latest instance (in case it is scheduled) or from the user instance in their inbox (in case document is published) from the two corresponding call input parameter (getFromLatestInstance and getFromUserInstance).
We are considering an improvement to allow consumers to select the document instance to use, but we are still in the process of gathering user feedback in order to implement this in the most convenient way (as we find challenging for consumers to know which instance are actually available when web service is called, and have them identify the one they request as well).
Any idea or feedback is welcome.
Regards,
David.

Install and Configure Ops Center for monitoring

Dear All,
Any one used to Install and Configure Ops Center for monitoring all Servers?
Please kindly give advice for this.
Thanks and regards,
Heng

Dear All,
Any one used to Install and Configure Ops Center for monitoring all Servers?
Please kindly give advice for this.
Thanks and regards,
Heng

Oracle OpenWorld and Ops Center 12c

When I was at Oracle OpenWorld two weeks ago, I could have sworn the Ops Center booth was running an unreleased version of Ops Center (to be 12c). If that is the case, what is the estimated release date of this product? And will it be like Oracle Enterprise Manager, and only run on Oracle Linux? Or is Ops Center 11g just being rebranded under the Enterprise Manager "12c" brand?

At Oracle OpenWorld, Oracle showed a preview of the next release of Ops Center plus the currently shipping version 11gR1. Oracle cannot discuss specific future release dates over public forums, but should you have a local Oracle account team servicing your company you can reach out to them and find out more information via the non-disclosure agreement process.
Ops Center works on Solaris (x86 and SPARC), Oracle Linux, and several RPM distributions of Linux. I will also note that Enterprise Manager 12c also works on a large variety of Operating Systems. We currently only see the Oracle Linux version downloadable because it is their release process to release Oracle Linux first and then follow up that release with additional downloads for the other Operating Systems in the weeks that follow.

Ops Center Console V 11.1.0.1571 shows latest downloads as .1536

Similar Messages

Maybe you are looking for