Ops Center - Updating Patches using the Update Profile tab

I am unable to create a new profile in order to update patches onto an asset. When trying to create a new profile in order update assets, I'm unable to access any option on the "Update Profile" tab. According to the manual , http://wikis.sun.com/display/EMOC11g1/Creating+an+OS+Update+Profile , that indicates that the option is disabled and the resolution is to register and manage your assets. The problem at hand is that despite registering and managing my assets I'm still unable to create a new profile. Could somebody give me insight on what else I could do in order to carry out the task of updating assets with patches.

No the update catalog action is not active. Yes it is in connected mode and I'm unable to define a default local library (all features under libraries are mostly disabled). Yed, I have supplied connected authentication usernames and passwords. How do I go about enable these features?

Similar Messages

Updating without using the updater?

Hi I was wondering if it is possible to download updates without using the updater as it is for a pc that is not online. Im after 3.2.0 on xp.
Many thanks

You can download the Windows updates
here and the Mac updates
here.

Why can't I use the update center in 9i Jdeveloper any more?

why can't I use the update center of 9i jdeveloper with my otn username and password anymore?
Is there any problem?

Hi,
We're aware of this issue and are looking into it.
Thanks,
Brian
JDev Team

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will a

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

Does Ops Center 12c Release 1 PSU2 (update 2) work with T4 and solaris 11.1

From the release notes of Ops Center 12c Release 1 PSU2 (update 2)
Issues With Upgrading to Oracle Solaris 11.1
Oracle Solaris 11.1 is supported in Oracle Enterprise Manager Ops Center 12.1.2.0.0 but is not supported in prior versions of Oracle Enterprise Manager Ops Center. In addition, an issue with Oracle Solaris 11.1 prevents Oracle VM Server for SPARC management on Oracle SPARC T4 servers using the Oracle Solaris 11.1 OS. See the Oracle Enterprise Manager Ops Center Release Notes for more information.
Does any one know if there has been a fix for this yes

We were told this was actually a problem in OC not S11.1, and this was fixed in U2.
I know this contradicts with the other answer, but thats the info we received from Oracle.

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How can I use the update operation in a VC Model

Hello experts,
i try to to use the update operation in my VC model. I have developed an AS wich return a table. Now i want to update a table row. So I add the update operation to my model. But it doesn´t work. I mapped all attribute between the table and the update service. The event name is submit.
Another strange thing is: If i try to update in the service browser it cames the error message that the vandatory attribute ... is missing.
Any ideas??
Thanks
Marco

Hi Marco,
In this case it is possible that your update service requires a mandatory parameter which you are not providing.
When you drag your service onto the VC screen, right click on the service and test it.It will give you a clear picture of which parameters are required by the service and besides you can also use some test data to check if the service is working properly.
Do let me know if this helps.
Thanks,
Gaurav.

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

Write an UPdate statement using the logic used in PL/SQL block (oracle 10g)

Hi All,
I have written the following PL/SQL block. I want to write an UPDATE statement using the logic used in the following PL/SQL block. can any one please help me out in this regards.
DECLARE
   v_hoov_fag   gor_gold_post.hoov_flg%TYPE;
   v_b49n          gor_gold_post.b49n%TYPE;
   CURSOR c
   IS
      SELECT bs_id, loyalty_date, loyalty_period, contract_date
        FROM gor_gold_post
       WHERE tariff_code IN (169, 135, 136);
BEGIN
   FOR rec IN c
   LOOP
      IF    (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
                    - SYSDATE) < 304
         OR (    TRUNC ( ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
                        - SYSDATE
                       ) IS NULL
             AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2
      THEN
         v_hoov_flg := 1;
      ELSE
         v_hoover_flag := 99;
      END IF;
      IF    (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
                    - SYSDATE) < 121.6
         OR (    TRUNC ( ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
                        - SYSDATE
                       ) IS NULL
             AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2
      THEN
         v_b49n := 1;
      ELSE
         v_b49n := 99;
      END IF;
      UPDATE gor_gold_post
         SET hoov_flg = v_hoov_flg,
             b49n = v_b49n
       WHERE bs_id = rec.bs_id AND tariff_code IN (169, 135, 136);
      COMMIT;
   END LOOP;
END;Thank you,

Using case statement.
UPDATE gor_gold_post
   SET hoov_flag = CASE WHEN TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) < 304
                               OR
                               (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) IS NULL
                            AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2)
                       THEN 1
                       ELSE 99
                     END,
       b49n      = CASE WHEN TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) < 121.6
                         OR
                         (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) IS NULL
                            AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2)
                       THEN 1
                       ELSE 99
                     END
WHERE tariff_code IN (169, 135, 136);Note: Code not tested.

How to use the update mechanism in Photoshop CS10 for Camera Raw?

Good Evenning!
I would like to open .NEF files with Adobe Photoshop CS10 (RAW for Nikon D5200) but my version of Camera Raw is too old.
I need at least the 7.3 version.
When I try to download it, I have this message: Please use the update mechanism in Photoshop CS10 for Camera Raw. But how?? When I go to "Help" tab, to "Updates", it says that no update available.
Can please someone help me?
Thanks a lot!!
Kinds Regards
Vanessa

Which version of photoshop or photoshop elements are you using?
Which operating system?
There is no such version as cs10.
Do you mean photoshop shop elements 10?
If you go to Help>About Photoshop Elements (windows) or Photoshop Elements Editor>About Photoshop Elements (mac), that should tell you which version you have.

How can I use the update service

Hello experts,
could you please explain me how to use the update service from a business object in the VC. I have created a object which contains following attributes:
- key(ID)
- created by(UserID)
- creted at(Datetime)
- modifiedAt(Datetime)
- modifiedBy(UsedID)
- argument(string) Kardinalität: 1...1
I have developed an application service which returns the whole entries of the table.
Now I want to select the row and update the attribute argument.
(For example the value is 24, and now I want to change it to 25. )
But if I test the service UPDATE in the Service Browser it cames always the error message that a value in the mandatory field argument is missing.
Any ideas?????? I am using the NWDS SP1.
Many thanks!!!
Regards Marco

Hi Marco,
In CAF you can do it by first using the update method to retrieve the BO instance and set the new value.
Regards,
Srinivasan Subbiah

How to update and use the values of variables of another class

I can we update or use the values of the variables of another class. For example, if we have class A
public class A //(situated in package view)
public s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp?alert=F");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
A.class has some procedures and String variables which can be updated and later can be used in JSP pages. The project starts with ARunner.jsp which uses the A.class and updates the values of string variables s0 and s1of A to hi and hello respectively.And then redirects the page to MainUser.jsp.
Now what I want is ,when I call those string variables(s0 & s1 of A.class) in any another jsp likeMainUser.jsp it should give me the value of hi and hello respectively not null as it is giving right now. Could you refine the coding for this one?

public class A //(situated in package view)
public String s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
giving code again to remove the typing errors. Please guide.

Want to insert a record using the updatable view object..

Hi, i am trying to create a new record in my first page using the updatable entity..I set the form in creat mode by default so that it will show empty fields for the first time.It works but want to know the following details..
1.Want to set default values to some fields ,so how do i override the create method and where(i mean the view object or entity).
2) internally it is using update query but not insert to insert a new record.
3) if it uses insert internally, how do i manipulate the insert statement at run time.
Guys please share ur experience and knowledge with me.I am awaiting for ur help....
thanks in advance..

From my perspective, you basically have 2 issues going here, the back end (database) and the front end (web page).
To simplify your life, test your overridden methods using the built-in tester. You can use it by right-clicking on your application module and selecting test. You can insert/update/delete rows in any updateable view object you have available in your data model. The only down-side is that you can't step through your code (so far as I've been able to determine, anyway).
As for the web side, there's a commit action in the data control palette. You can drop that onto a page as a button. There's also some tricks you can play so it saves and commits on the same button click, but I don't recall how specifically you do that. I know I've found it searching in here though.

Ops Center - Updating Patches using the Update Profile tab

Similar Messages

Maybe you are looking for