OPSI setting remain as ABAP code after client deletion

Hi all,
I'm just wondering if anyone face this problem before:
1. I've created some test data in OPSI (validations of project system) in a test client (eg: 201)
2. I perform client deletion on 201 and client copy from PRD to 201
3. If I check the include statement, the test data still exist as ABAP code (and will generate an abap runtime error). However, if I go to OPSI, the test data no longer not exist.
4. If I re-create the test data in OPSI, then this problem is solved.
Regards.

THere is nothign to worry about it. It is std.behaviour. Wheneven you trasport or Copy client with refrence to Validation. Even though validation is in place in congiuration but system not read that validation and behave as per last config of validation.
You need to correct the same manually by Validation menu--> Simulate function, This will internally generate ABAP code according to your currnet validation. After that your system will behave correctly according to currnet config of validation.
With regards
Nitin p.

Similar Messages

Table space and recollection of released space after client deletion

Dear All,
I have two questions:
1.Can any1 tell me how to determine the fastest growing table and how to reorganize table space.
2. Is there any way by which we can recollect the space released:say after client deletion. I had deleted one client two weeks back and when I saw the SAP/user drive I fow free space available remains the same.
I searched but found no relevant clue.
regards,
Ashutosh

1.- You can see the largest table report in ST04 (as far as i remember)...
2.- You can reorganize your db using brtools - brspace...
Read,
http://help.sap.com/saphelp_erp2004/helpdata/en/32/0d0c888839164ba4245b3ff7969c59/frameset.htm
Regards
Juan

FREE SPACE COLLECTION AFTER CLIENT DELETION

Hi,
I delete a client but there is no effect on the database size.... means all the table space are having the same size as before client deletion...
What to do... to recollect all the free space after client deletion...???
Regards,
Neehir Bhatt

Hi,
Use brtools to reduce the tablespace size.
http://help.sap.com/saphelp_nw04/helpdata/en/a7/8db6c2ebc5384eb82e5f99e49600d6/content.htm
Regards
Ben

Space Reorganization after client delete.

Hi Gurus,
      I have a doubt in reorganization of space after client delete.
       I have created a client and the client copy(local) was done successful. Now i want to delete the client and want to clear the space occupied by the new client (approx 2 GB) . Can u help me how to empty the space occupied by this client.
     My environment..IDES 4.7 . Win 2k. Oracle database.
Thanks in Advance,
Sachin.

Hi
Sachin.
Inorder to delete the client login to the particular client say like ex: 300
execute from the functions or SCC5.
Select if u want to delete it from the entry of table T000, schedule it immediately or background, Whenever it is deleted the space is not automatically freed from the database although these areas can be filled up with new data.
When a client is deleted and created again, the space which is freed can be filled up with new data.
To immediately restore the free space perform the database reorganization, this is recommended when ur client is having a large amount of database.
For ur case the client is of size 2GB, the new data can reuse the free space of the deleted client,
Checking the space management, current sizes,space statistics etc., Goto the Database performance or Tcode DB02 check the Date/Time analysis when it has done, Else do refresh so that a dialog box is opened and prompts u to select
1. Perform the database checks
2. DB checks and update statistics
Select the 2 option so that it will reorganize the database.
Regards
Bhaskar
Edited by: bhaskar1818 on Jun 3, 2008 10:15 AM

Do we have a ABAP code / program to delete all objects viz. InfoObjects etc

I am working on a SAP BI7.0 implementation project and seek help on the following points -
Do we have a ABAP code / program to delete all objects viz. InfoObjects, InfoProviders, Datasources, Infopackages, DTP, Transformations etc. in ONE shot
Secondly, does anyone have a template created for capturing information on Transports created for release?
Please do let me know.
Thanks in advance,
Venkat

It may be hard to delete objects containing data.
Try
RSDG_CUBE_DELETE               Deleting InfoCubes
RSDG_IOBC_DELETE               Deleting InfoCubes
RSDG_IOBJ_DELETE               Deleting InfoObjects (without automatic transport connection !)
RSDG_MPRO_DELETE               Deleting InfoCubes
Also check :
How to delete multiple InfoObjects in one shot?

Kanban set to empty - ABAP code

Hello,
What program/function module is fired off when a kanban is set to empty?
In PK13N, if I click "kanban empty" a process is started that will eventually refill the kanban, but what is the ABAP program that handles this?
Thanks,
Matt

Hi Matt,
Good!
Before clicking the kanban emity, in the command box type /h and press enter then it will go to debug mode.
after clicking the button, it will go to the program which performing this.
Thanks,
Sunil

Dbase reorganisation after Client Deletion

Hi All gurus,
We are planning to Delete 2 clients on our DEV system namely 020 and 060, i just wanted to know whether after deletion is the space automatically adjusted or are there any steps to be performed so that the disk space is utilised to the best and is reorganised.
Please help me with the relevent Tx Codes for dbase reorganisation (If required).
We are on
ECC 6.0
Ms SQL 2005
Windows 2003 server
Kindly suggest..
Thanks
Hunky dude

Hi Kent,
Yes, you need to reorganize the tablespace, in order to reclaim space to the OS. This is because, Oracle already allocated the space when you added or extended a datafile and will not be released this space, until you reorganize the tablespace. Please check the note "Note 646681 - Reorganizing tables with BRSPACE".
For example;
brspace -u / -f tbreorg -s psapddicd -t "*" -p 4
Best regards,
Orkun Gedik

Abap code not working - deleting based on master data table information

Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM    XSOURCE
0999               IND01
0888               IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE                             /M/CODENUM
IND01                                       0999
IND01                                       0888
IND01                                       0555
IND01                                       0444
FRF01                                      0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PM

It's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
      r_srce TYPE RANGE OF char5, "Range Table for Source
      s_srce LIKE LINE OF r_srce,
      r_code TYPE RANGE OF numc04,"Range table for Code
      s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
          s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.

Removing Trash Code after control deletion

HI, my name is Tom�s. I have a problem using the Visual Web Pack 7 with netbeans 5.5.
If I drag n' drop any control (for example a button) to the form (the page) and the I delete this control, the button code isn't removed from the Java source.
I think this make my code very confuse :s
Does exist any way to mantain my code clean automatically?
Thankssss ;)

Drag'n'dropping is definitely not productive. Creating might be fast (very significant though), but maintaining and troubleshooting will take a longer time. It's bad if you don't understand the generated code and therefore cannot fix the eventual bugs/issues quickly.
Once you understand the code you'll find the generated code by drag'n'dropping awful.

How to download ABAP(report,module pool...etc) source code to client PC?

hi guys,
please advise how can i download/export ABAP(report,module pool...etc) source code to client PC?
thanks.

hi
this report is to export to another server...
PROGRAM ZDOWNLOAD_SAP
LINE-SIZE 132
LINE-COUNT 62
NO STANDARD PAGE HEADING.
This program up / downloads from / to a local dataset
all the components of an ABAP - i.e TEXTS, the entire CUA
including statuses and menus, DYNPROS and source code.
Program documentation and variants are not handled.
INCLUDED programs are automatically handled both on upload
or download. INCLUDE selection can be excluded or generic
e.g only handle INCLUDES starting with ZIN*
INCLUDES within INCLUDES alos handled.
The only restriction is on UPLOAD the INCLUDED programs must come
from the same directory as the main program.
On Download of course the ABAP must exist in the library.
Note for LINUX and BATCH users
This program was originally designed as a one off tool for
getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
an R3 test system minimising the need for a large amount of
mainframe sysprogs (anybody remember what they were !!) time
and support to say nothing of access problems from TSO /JES2 /
SAP R2. At that time network connections were patchy and the
transport systems largely incompatable and not very reliable.
This program was originally designed as a one off tool for
Must run on Windows front end ---- If you are running SAP with
LINUX on your work station you will have to change the WS_UPLOAD
and WS_DOWNLOAD functions to reflect the Linux file system. The
contents of the data sets themseleves do not need to be changed
Program can easily be modified to run in batch and store
the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
to read from and write to UNIX data sets (OPEN FILE etc).
You will also need to modify the parts of the program that get
the DOS directory and display the Windows file paths.
The actual abap data sets do not need to be changed.
Rel 4.0 names can now be up to 40 bytes long
Dynpros and CUA have changed from rel 3.1
Tabstrips now loaded and unloaded in dynpros
Please note restriction on 4.6 systems for users who
have ABAP names which include '/'s in their names.
Rel 4.6b, 4.6c Abap names can include the '/' in their names
e.g /CUST1/CUST2/ORDER
This causes problems when storing to a local file.
a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
be changed to %. On upload the % should be changed back to /
again. This change still needs to be implemented.
If you don't use the / in the abap name then this is not a problem.
If file to be uploaded is in rel 3 format then names are only 8
bytes long.
program uses 3 datasets per abap
1) abapname.eee source, dynpr logic, texts, CUA stuff
2) abapname.hhh dynpr header
3) abapname.fff dynpro fields.
because of varying lengths and contents 3 data sets are used. The
complexity of combining all these to 1 data set would make the
program far too complex.
NOTE: This version of the program can only be used on
release 4.0 or higher. Once an ABAP has been converted
to rel 4.0 it cannot be converted back to rel 3.0
on a release 3/3.1 system. Release 4 CUA tables
are different. Use release 3 version of this program
for releases 3.0 and 3.1. Available on SAPFANS website.
Note that data to be uploaded must have been previously downloaded
by this program (any version since rel 2.0) - except for Initial
Load -- see end of these comments.
Dynpros and CUA statuses have changed since rel 3.1
This program will handle rel 3.1 format on upload but will
download in rel 4.0 format. To upload 3.1 format specify an 'X'
in the rel3 parameter.
If you have downloaded components in rel 4.0 format and you
want to re-load to a 3.1 system you will have to load
the source via standard upload and re-create dynpros and the CUA
manually.
As names can now be longer than 8 characters you can only
use this program if the SAP front end (SAPGUI) supports
long file names (WIN 95/98 or WIN NT). Windows 3.x will not
work as the underlying DOS system cannot handle long file names.
UPLOAD function and DOS directory.
When an ABAP is selected for UPLOAD then the DOS
directory is read into a table. A file called ABAP.BAT is created,
and down loaded to the 'C' drive and executed.
This file executes a DOS DIR command and pipes the output
into a dataset which is then uploaded into an internal
table on SAP.
Note on running DOS commands from ABAP
The first time this procedure is executed you will see a DOS window
which you will have to close manually. To get round this
use windows explorer to select the file ABAP.BAT and then
right mouse click on the file name. Select the
properties window. From this click the CLOSE on EXIT box. This
will then automatically close the DOS function after it has
executed. (Windows restriction).
The DOS function has not been tested using Windows 2000 so
it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
If INCLUDE programs are wanted on UPLOAD only the specified
directory is searched.
Instead of entering path name manually you can click on
the path parameter. Because of Windows restriction you will
have to select ANY file in the relevant directory.
The path will then be copied on to the selection screen.
To do still : Merge 3 files to one and compress output to .ZIP file
fix 4.5 4.6 problem of abaps containing '/' in the name
possibility to automatically up / download referenced
function modules with selection criteria like INCLUDES
To load the ist time into a system.
Create program with ABAP editor and Upload the .EEE file.
Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
Delete all the source from the line that starts ????TEXT (towards
the end file) till the end so the last line in your source is ENDFORM.
DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
Save file and execute
Use following parameters (Note the ist time you won't get proper
text on the selection screen).
Function U
Path full dos path containing source e.g c:\abaps\
NOTE YOU MUST ENTER THE FINAL \ as above.
REPID the program name. e.g ZZJIMHXX
note that on the DISK you will see 3 files
ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
just use the name before the dos qualifier - the
program will do the rest
ignore other parameters
The program will then load itself with all the texts etc.
It should now be ready for use.
Macros
DEFINE DEFINE_TABLE.
DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
END-OF-DEFINITION.
DEFINE CLS.
REFRESH &1.
CLEAR &1.
END-OF-DEFINITION.
DEFINE INIT.
IF &1 NE SPACE.
SEARCH &1 FOR '. .'.
IF SY-SUBRC = 0.
WRITE '*' TO &1+SY-FDPOS(1).
ENDIF.
TRANSLATE &1 USING '*%'.
ELSE.
MOVE '%' TO &1.
ENDIF.
END-OF-DEFINITION.
end of macros
/ SAP standard tables */
TABLES: D020S, "Dynpro header
D020T, "Dynpro title
D021T, "Screen field keyword texts
TRDIR, "Attribute table
TADIR, "Dev. class etc.
EUDB, "CUA data
TSTC, "transaction data
TITLE, "CUA titles
RSMPTEXTS. "Function texts (rel 4.0)
/ Work tables to hold ABAP source etc, and dynpro */
/ contents. */
DATA: BEGIN OF H. "Header
INCLUDE STRUCTURE D020S.
DATA: END OF H.
DATA: BEGIN OF H1 OCCURS 10, "Header
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D020S.
DATA: END OF H1.
DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
CNAME(8) TYPE C,
CNUM(4) TYPE C,
NNAME(8) TYPE C,
NNUM(4) TYPE C,
FILL(51) TYPE C,
CDAT(6) TYPE C,
CTIM(6) TYPE C,
END OF H2.
DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
INCLUDE STRUCTURE D021S.
DATA: END OF F.
DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D021S.
DATA: END OF F1.
DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
NAME(8) TYPE C,
NUMBER(4) TYPE C.
INCLUDE STRUCTURE D021SE_OLD.
DATA: END OF OLD_F1.
DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
TFIL(284) TYPE C,
END OF F2.
DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
INCLUDE STRUCTURE D023S.
DATA: END OF M.
DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
INCLUDE STRUCTURE D022S.
DATA: END OF E.
DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D022S.
DATA: END OF E1.
DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N,
END OF T.
DATA: BEGIN OF R OCCURS 56, "prog name and language
NAME(40) TYPE C, "rel 4
LANGUAGE(1) TYPE C,
END OF R.
DATA: BEGIN OF S OCCURS 3000,
TXT(180) TYPE C, "rel 4 was 132
END OF S.
DATA: BEGIN OF R1 OCCURS 50, "for include programs
NAME(40) TYPE C, "rel 4
INSTANCE(3) TYPE P,
END OF R1.
DATA: BEGIN OF S1 OCCURS 3000,
TXT(180) TYPE C, " rel 4 was 132
END OF S1.
DATA: BEGIN OF U OCCURS 100, "Text elements
TXT(180) TYPE C, " rel 4 was 132
END OF U.
DATA: BEGIN OF DIR. "ABAP Attributes
INCLUDE STRUCTURE TRDIR.
DATA: END OF DIR.
DATA: BEGIN OF DTXT. "Dynpro field keyword texts
INCLUDE STRUCTURE D021T.
DATA: END OF DTXT.
/ This data contains all the components of the */
/ CUA such as menus, statuses, Pfkeys */
/ As from rel 4.5 Tabstrips are automatically copied as well */
/ The rel3 parameter must be set however to load the */
/ correct version of the CUA tables if uploading rel 3 */
/ data to a rel 4 system. */
/ Rel 4.0B can convert 3.1 and earlier CUA's */
/ This could change later however. */
CUA Tables.
Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
DATA BEGIN OF EU_KEY.
INCLUDE STRUCTURE RSEU1_KEY.
DATA END OF EU_KEY.
Status
DATA BEGIN OF STA OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAT. " rel 4
DATA END OF STA.
Functions
DATA BEGIN OF FUN OCCURS 0.
INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
DATA END OF FUN.
Menus
DATA BEGIN OF MEN OCCURS 0.
INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
DATA END OF MEN.
Menus (texts)
DATA BEGIN OF MTX OCCURS 0.
INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
DATA END OF MTX.
Action Bar
DATA BEGIN OF ACT OCCURS 0.
INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
DATA END OF ACT.
Push Buttons
DATA BEGIN OF BUT OCCURS 0.
INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
DATA END OF BUT.
PF-Keys
DATA BEGIN OF PFK OCCURS 0.
INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
DATA END OF PFK.
Function sets
DATA BEGIN OF SET OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
DATA END OF SET.
Documentation
DATA BEGIN OF DOC OCCURS 0.
INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
DATA END OF DOC.
Title codes with text
DATA: BEGIN OF TIT OCCURS 0.
INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
DATA: END OF TIT.
DATA BEGIN OF FTX OCCURS 0. "rel 4.0
INCLUDE STRUCTURE RSMPTEXTS.
DATA END OF FTX.
rel 3.1 CUA components.
Status
DATA BEGIN OF OLD_STA OCCURS 0.
INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
DATA END OF OLD_STA.
Functions
DATA BEGIN OF OLD_FUN OCCURS 0.
INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
DATA END OF OLD_FUN.
Menus
DATA BEGIN OF OLD_MEN OCCURS 0.
INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
DATA END OF OLD_MEN.
Menus (texts)
DATA BEGIN OF OLD_MTX OCCURS 0.
INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
DATA END OF OLD_MTX.
Action Bar
DATA BEGIN OF OLD_ACT OCCURS 0.
INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
DATA END OF OLD_ACT.
Push Buttons
DATA BEGIN OF OLD_BUT OCCURS 0.
INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
DATA END OF OLD_BUT.
PF-Keys
DATA BEGIN OF OLD_PFK OCCURS 0.
INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
DATA END OF OLD_PFK.
Function sets
DATA BEGIN OF OLD_SET OCCURS 0.
INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
DATA END OF OLD_SET.
Documentation
DATA BEGIN OF OLD_DOC OCCURS 0.
INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
DATA END OF OLD_DOC.
Title codes with text
DATA: BEGIN OF OLD_TIT OCCURS 0.
INCLUDE STRUCTURE TITLE. "rel 3.1
DATA: END OF OLD_TIT.
dynamic function text
DATA BEGIN OF FDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
DATA END OF FDN.
Icons
DATA BEGIN OF FIN OCCURS 1.
INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
DATA END OF FIN.
dynamic menu texts
DATA BEGIN OF MDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
DATA END OF MDN.
Symbol list
DATA BEGIN OF SYM OCCURS 0.
INCLUDE STRUCTURE RSEU1_SYMB.
DATA END OF SYM.
Status Short text
DATA BEGIN OF STX OCCURS 0.
INCLUDE STRUCTURE RSEU1_CTX.
DATA END OF STX.
Attributes for function key settings (menu bars) Rel 3.0
DATA BEGIN OF ATT OCCURS 0.
INCLUDE STRUCTURE RSEU1_HAT.
DATA END OF ATT.
Include-Menus
DATA BEGIN OF INC OCCURS 3.
INCLUDE STRUCTURE RSEU1_INC.
DATA END OF INC.
Last used numbers
DATA BEGIN OF LAST.
INCLUDE STRUCTURE RSEU1_LST.
DATA END OF LAST.
data for call transaction (SE41 to re-generate the CUA)
DATA: BEGIN OF T_BDC_TAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA. "BDC data
DATA: END OF T_BDC_TAB.
DATA: BEGIN OF T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF T_MESSTAB.
/ Program data */
DATA: NUMBER(4) TYPE N,
OLDNUM(4) TYPE N,
FILESIZE TYPE I,
NR_OF_BYTES TYPE I,
I(3) TYPE P,
IX(3) TYPE P,
J(3) TYPE P,
L(3) TYPE P,
CUA-FLAG(1) TYPE C,
CUA_RETURN(10) TYPE C,
DYNPRO_MESSAGE(160) TYPE C,
DYNPRO_LINE TYPE P,
DYNPRO_WORD(30) TYPE C,
NUM(3) TYPE N,
DYNNAME(44) TYPE C,
FN1(128) TYPE C,
FN2(128) TYPE C,
FN3(128) TYPE C,
W_ITERATE(1) TYPE C,
MAIN(1) TYPE C,
FUNC(1) TYPE C,
OLDNAME(40) TYPE C,
OLD-FUNC(8) TYPE C,
NEW-FUNC(8) TYPE C,
FOUND(1) TYPE C,
LANGUAGE LIKE SY-LANGU,
FIRST-TIME(1) TYPE C VALUE 'Y',
OK-CODE(5) TYPE C,
NAME(40) TYPE C, "rel 4
TXLINE(70) TYPE C,
LINE(132) TYPE C.
DATA:
UL_FILE(128) TYPE C,
DL_FILE(128) TYPE C,
DOSLINE(72) TYPE C.
DATA: BEGIN OF DOSDIR OCCURS 0,
TEXT(72),
END OF DOSDIR.
DATA: BEGIN OF I_PROG OCCURS 0,
NAME(40),
END OF I_PROG.
DATA: BEGIN OF I_PROGT OCCURS 0,
NAME(40),
END OF I_PROGT.
DATA: BEGIN OF I_INCLUDE OCCURS 0,
NAME(40),
HANDLED(1) TYPE C,
END OF I_INCLUDE.
DATA: BEGIN OF I_INCL OCCURS 0,
NAME(40),
END OF I_INCL.
DATA: BUFFER(1024).
DATA: WINSYS(3).
DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
DATA: GLOBAL_FILEMASK_ALL(80).
DATA: T_FILENAME(128),
TMP_FILENAME(128),
T_MODE(1),
FIELDLN TYPE I.
DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F>.
/ Parameters */
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
PARAMETERS:
FUNCTION(1) TYPE C OBLIGATORY, "Function
DSNAME(40) TYPE C, "Data set name
INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
IMASK(40) TYPE C, "Include Mask
CLASS LIKE TRDIR-CLAS,
AUTHOR LIKE TRDIR-CNAM, "Author
APPL LIKE TRDIR-APPL,
PATH(88) TYPE C DEFAULT 'A:\',
REL3(1) TYPE C.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A1.
/ Check users workstation is running WINDOWS, */
/ WINDOWS 95, or WINDOWS NT. OS/2 no good for */
/ this application. */
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'WS'
IMPORTING
RETURN = WINSYS.
IF WINSYS(2) NE 'WN'. "Win 3.X no good either
WRITE: / 'Windows NT or Windows 95/98 is required'.
EXIT.
ENDIF.
/ Get names of programs to be handled. */
/ Name can be a single value, many values or ranges */
/ as per standard SELECT-OPTIONS on selection screen */
/ On Download read TRDIR and store program names in a table */
/ as per selection options. */
/ On upload read the specified directory for all files of */
/ type .EEE from specified directory */
/ compare file names with selection criteria */
MOVE FUNCTION TO FUNC.
MOVE 'Y' TO MAIN.
CASE FUNC.
WHEN 'U'. "Upload required
PERFORM READ_DOS_DIRECTORY.
PERFORM GET_RANGE_UL. "Get list of progs to process
WHEN 'D'. "Download required
PERFORM GET_RANGE_DL. "Get list of progs to process
WHEN OTHERS.
WRITE: / 'Function not performed due to user request'.
EXIT.
ENDCASE.
SORT I_PROG.
DELETE ADJACENT DUPLICATES FROM I_PROG.
For download INCLUDE handling can be resolved via function
module call.
All Includes within Includes are also resolved by the function
module call.
Note that this method does not work if program itself is of type
I (it's an include)
In this case we can still search the source.
IF FUNC = 'D'.
IF INCLUDES = 'Y'.
PERFORM GET_INCLUDES_DL.
PERFORM PROCESS_INCLUDES_DL.
ENDIF.
ENDIF.
Program list from selection criteria i.e excluding INCLUDES found
LOOP AT I_PROG.
MOVE I_PROG-NAME TO R1-NAME.
APPEND R1.
DESCRIBE TABLE R1 LINES I.
WHILE I NE 0.
PERFORM EXECUTE-FUNCTION.
ENDWHILE.
REFRESH R1.
ENDLOOP.
We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
program itself is of type I. In this case the function call
will not return the INCLUDES. For example we could be
downloading ZTESTTOP (an Include itself) which as an include
ZTEST01.
The process fortunately is the same as the UPLOAD function
except of course we need to read the library instead of the
DOS directory
process INCLUDE modules for Upload
On upload the procedure is more complex as Includes within
Includes can only be resolved by scanning the code and
searching if the program exists in the directory.
To get all INCLUDES within INCLUDES entries in table I_INCL
that do not exist in I_INCLUDE are copied to table I_INCLUDE
after each entire pass of table i_INCLUDE and table is then
re-looped through. Programs in table I_INCLUDE that have already
been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
if func = 'U'.
IF INCLUDES = 'Y'.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
WHILE W_ITERATE = 'Y'.
PERFORM PROCESS_INCLUDES_UL.
PERFORM LOOP_THROUGH.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
ENDWHILE.
endif.
ENDIF.
DESCRIBE TABLE I_INCLUDE LINES I.
IF I > 0.
SKIP 1.
WRITE: / ' Included Programs found'.
SKIP 1.
LOOP AT I_INCLUDE.
WRITE I_INCLUDE-NAME TO LINE(40).
CONDENSE LINE.
WRITE: / LINE(80).
ENDLOOP.
ENDIF.
/ Table R contains ABAP names to up / download. */
/ Loop through table R and perform up / download */
/ for each program. */
/ Table R1 contains INCLUDE names found (if any) */
/ As each */
FORM EXECUTE-FUNCTION.
LOOP AT R1.
MOVE-CORRESPONDING R1 TO R.
APPEND R.
ENDLOOP.
REFRESH R1.
LOOP AT R.
REFRESH : T, E1, H1, F1, S, U.
PERFORM PROCESS.
MOVE 'N' TO MAIN.
ENDLOOP.
REFRESH R.
DESCRIBE TABLE R1 LINES I.
ENDFORM.
/ Build file names for UP/DOWNLOAD */
/ 3 files are generated per ABAP. */
/ 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
/ Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
/ CUA Path\PROGNAME.EEE (CUA components - keys etc) */
/ 2) Header Path\PROGNAME.HHH (Dynpro Header) */
/ 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
/ ( If alternate file name specified -DSNAME- this will */
/ be used instead. This is only valid for the main program. */
/ INCLUDED programs will have file names as specified */
/ above). */
/ By using this scheme it saves the user from having to */
/ be prompted for 3 file names. */
/ If you want multiple copies / versions on disk either */
/ rename the old versions or specify a different directory in */
/ the path parameter. */
FORM PROCESS.
MOVE PATH TO FN1.
CASE MAIN.
WHEN 'Y'.
IF DSNAME NE SPACE.
WRITE DSNAME TO FN1+66. "rel 4
ELSE.
WRITE R-NAME TO FN1+66. "rel 4
ENDIF.
WHEN OTHERS.
WRITE R-NAME TO FN1+66. "rel 4
ENDCASE.
MOVE FN1 TO FN2.
MOVE FN1 TO FN3.
WRITE '.HHH' TO FN1+124(4). "rel 4
WRITE '.FFF' TO FN2+124(4). "rel 4
WRITE '.EEE' TO FN3+124(4). "rel 4
CONDENSE FN1 NO-GAPS.
CONDENSE FN2 NO-GAPS.
CONDENSE FN3 NO-GAPS.
NAME = R-NAME.
CASE FUNC.
WHEN 'D'.
PERFORM DOWNLOAD_OBJECTS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been unloaded' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
DESCRIBE TABLE T LINES I.
IF I = 0.
WRITE: / 'No Dynpros were found for unload function'.
ELSE.
WRITE: / 'The following Dynpros have been unloaded : '.
PERFORM LOOP_THROUGH_T.
ENDIF.
WHEN 'U'.
PERFORM UPLOAD_OBJECTS.
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0.
WRITE: / 'No Dynpros were found for restore function'.
WHEN OTHERS.
WRITE: / 'The following Dynpros have been restored : '.
PERFORM LOOP_THROUGH_T.
ENDCASE.
IF MAIN EQ 'Y'.
CASE OLDNAME.
WHEN SPACE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
WHEN OTHERS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored - original name :'
TO LINE+55.
WRITE OLDNAME TO LINE+92.
CONDENSE LINE.
WRITE: / LINE.
ENDCASE.
ELSE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
ENDIF.
ENDCASE.
ENDFORM.
/ print progname + dynpro nrs that have been processed. */
FORM LOOP_THROUGH_T.
LOOP AT T.
CLEAR LINE.
WRITE R-NAME TO LINE.
WRITE T-NUMBER TO LINE+50.
CONDENSE LINE.
WRITE: / LINE.
ENDLOOP.
ENDFORM.
/ Download Objects */
FORM DOWNLOAD_OBJECTS.
PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
IF TRDIR-SUBC = 'I'.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
ENDIF.
PERFORM UNLOAD_CUA. "CUA stuff
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
PERFORM BUILD_T. "Build table of all dynpros in ABAP
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0. "if no dynpros exist then cannot download any
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
WHEN OTHERS.
PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
ENDCASE.
ENDFORM.
/ Split ABAP up into its component parts */
/ A) Program source (72) */
/ B) Texts (132) */
/ C) Attributes (117) */
/ D) CUA stuff (Various) */
FORM UNLOAD_ABAP.
/ Get ABAP language. Only required on download. */
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE TRDIR-RLOAD TO R-LANGUAGE.
READ REPORT R-NAME INTO S. "Get source into table S
MOVE '????SRCE' TO S-TXT.
INSERT S INDEX 1.
/ Text elements, Numbered texts, headings, selection texts */
/ Read text elements with logon language. If they don't */
/ exist read with the value taken from TRDIR. */
READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
IF SY-SUBRC NE 0.
READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
ENDIF.
DESCRIBE TABLE U LINES I.
CASE I.
WHEN 0.
WHEN OTHERS.
MOVE '????TEXT' TO S-TXT.
APPEND S.
LOOP AT U.
MOVE U-TXT TO S-TXT.
APPEND S.
DELETE U.
ENDLOOP.
ENDCASE.
/ Retrieve Attributes from TRDIR and add to table S */
/ Change language to logged on language */
MOVE '????ATTR' TO S-TXT.
APPEND S.
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE SY-LANGU TO TRDIR-RLOAD.
MOVE-CORRESPONDING TRDIR TO DIR.
MOVE DIR TO S-TXT.
APPEND S.
ENDFORM.
/ retrieve CUA stuff and append to table S. */
FORM UNLOAD_CUA.
MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
ATT FDN MDN SYM FIN "rel 3.0
FROM DATABASE EUDB(CU) ID EU_KEY.
IF SY-SUBRC NE 0. "No statuses
EXIT.
ENDIF.
read titles in logged on language. If not present use
language from TRDIR.
CASE REL3.
WHEN SPACE. "(rel 4)
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = SY-LANGU.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = R-LANGUAGE.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
ENDIF.
DESCRIBE TABLE FTX LINES I.
IF I > 0.
MOVE '????FTXT' TO S-TXT.
APPEND S.
LOOP AT FTX.
MOVE FTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
WHEN OTHERS.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ SY-LANGU.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ R-LANGUAGE.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
ENDIF.
ENDCASE.
DESCRIBE TABLE STA LINES I.
IF I > 0.
MOVE '????STAT' TO S-TXT.
APPEND S.
LOOP AT STA.
MOVE STA TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FUN LINES I.
IF I > 0.
MOVE '????FUNC' TO S-TXT.
APPEND S.
LOOP AT FUN.
MOVE FUN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MEN LINES I.
IF I > 0.
MOVE '????MEN1' TO S-TXT.
APPEND S.
LOOP AT MEN.
MOVE MEN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MTX LINES I.
IF I > 0.
MOVE '????MTX1' TO S-TXT.
APPEND S.
LOOP AT MTX.
MOVE MTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE ACT LINES I.
IF I > 0.
MOVE '????ACTN' TO S-TXT.
APPEND S.
LOOP AT ACT.
MOVE ACT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE BUT LINES I.
IF I > 0.
MOVE '????BUTN' TO S-TXT.
APPEND S.
LOOP AT BUT.
MOVE BUT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE PFK LINES I.
IF I > 0.
MOVE '????PFKY' TO S-TXT.
APPEND S.
LOOP AT PFK.
MOVE PFK TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SET LINES I.
IF I > 0.
MOVE '????SETS' TO S-TXT.
APPEND S.
LOOP AT SET.
MOVE SET TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
IF LAST NE SPACE.
MOVE '????LIST' TO S-TXT.
APPEND S.
MOVE LAST TO S-TXT.
APPEND S.
ENDIF.
DESCRIBE TABLE INC LINES I.
IF I > 0.
MOVE '????INCL' TO S-TXT.
APPEND S.
LOOP AT INC.
MOVE INC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE STX LINES I.
IF I > 0.
MOVE '????STXT' TO S-TXT.
APPEND S.
LOOP AT STX.
MOVE STX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE DOC LINES I.
IF I > 0.
MOVE '????DOCN' TO S-TXT.
APPEND S.
LOOP AT DOC.
MOVE DOC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE TIT LINES I.
IF I > 0.
MOVE '????TITL' TO S-TXT.
APPEND S.
LOOP AT TIT.
MOVE TIT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
DESCRIBE TABLE ATT LINES I.
IF I > 0.
MOVE '????VATT' TO S-TXT.
APPEND S.
LOOP AT ATT.
MOVE ATT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FDN LINES I.
IF I > 0.
MOVE '????VFDN' TO S-TXT.
APPEND S.
LOOP AT FDN.
MOVE FDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MDN LINES I.
IF I > 0.
MOVE '????VMDN' TO S-TXT.
APPEND S.
LOOP AT MDN.
MOVE MDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SYM LINES I.
IF I > 0.
MOVE '????VSYM' TO S-TXT.
APPEND S.
LOOP AT SYM.
MOVE SYM TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FIN LINES I.
IF I > 0.
MOVE '????VFIN' TO S-TXT.
APPEND S.
LOOP AT FIN.
MOVE FIN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
ENDFORM.
/ Upload Objects. */
FORM UPLOAD_OBJECTS.
PERFORM UPLOAD_EEE. "ABAP,texts,attr dynpro logic
DESCRIBE TABLE E1 LINES I.
IF I > 0. "Do dynpro components exist
PERFORM UPLOAD_HHH. "dynpro header
PERFORM UPLOAD_FFF. "dynpro fields.
PERFORM RECONSTRUCT_DYNPROS. "load + gen dynpros
ENDIF.
ENDFORM.
/ Build table containing dynpro names and numbers */
FORM BUILD_T.
SELECT * FROM D020S WHERE PROG EQ R-NAME.
T-NUMBER = D020S-DNUM.
T-NAME = D020S-PROG.
APPEND T.
ENDSELECT.
ENDFORM.
/ Split dynpros into constituent parts. */
FORM UNLOAD_DYNPROS.
MOVE 'Y' TO FIRST-TIME.
LOOP AT T.
REFRESH: F, E.
CLEAR: H, F, E.
PERFORM BUILD_HHH. "Dynpro Header
PERFORM BUILD_FFF. "Dynpro Fields
PERFORM BUILD_EEE_DYNP. "Dynpro Logic
ENDLOOP.
ENDFORM.
/ Header H length 284. */
FORM BUILD_HHH.
MOVE T-NAME TO DYNNAME(40). "rel 4.
MOVE T-NUMBER TO DYNNAME+40(4). "rel 4.
IMPORT DYNPRO H F E M ID DYNNAME.
MOVE T-NAME TO H1-NAME.
MOVE T-NUMBER TO H1-NUMBER.
MOVE-CORRESPONDING H TO H1.
APPEND H1.
ENDFORM.
/ Fields D021S Len 87. */
FORM BUILD_FFF.
MOVE T-NAME TO F1-NAME.
MOVE T-NUMBER TO F1-NUMBER.
LOOP AT F.
MOVE-CORRESPONDING F TO F1.
APPEND F1.
DELETE F.
ENDLOOP.
ENDFORM.
/ Dynpro Logic D022S E */
FORM BUILD_EEE_DYNP.
MOVE T-NAME TO E1-NAME.
MOVE T-NUMBER TO E1-NUMBER.
LOOP AT E.
MOVE-CORRESPONDING E TO E1.
APPEND E1.
DELETE E.
ENDLOOP.
ENDFORM.
/ Unload Constituent parts of dynpro. */
FORM UNLOAD_DYNPRO_COMPONENTS.
MOVE '????LOGC' TO S-TXT.
APPEND S.
LOOP AT E1.
MOVE E1 TO S-TXT.
APPEND S.
DELETE E1.
ENDLOOP.
FREE E1.
LOOP AT T.
MOVE 'N' TO FOUND.
SELECT SINGLE * FROM D020T "use logged on language
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU.
IF SY-SUBRC NE 0. "try original language.
SELECT SINGLE * FROM D020T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
ENDIF.
IF SY-SUBRC EQ 0.
IF FOUND = 'N'.
MOVE '????DTIT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE T-NAME TO S-TXT.
WRITE T-NUMBER TO S-TXT+8(4).
WRITE D020T-DTXT TO S-TXT+12(60).
APPEND S.
ENDIF.
MOVE 'N' TO FOUND.
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU. "logged on language
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS. "try original language
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
ENDCASE.
ENDLOOP.
ENDFORM.
/ Build the original dynpro component tables. */
/ Table H1 contains 1 entry for each dynpro. H1 contains */
/ the header for the dynpro prefixed by the program name */
/ and dynpro number. */
/ By looping round this table we can re-build the F */
/ (Fields) and E (Logic) components. By stripping off the */
/ program name and dynpro number the original tables are */
/ re-created. (Tables F1 and E1 also have a prefix of */
/ Program name and dynpro nr). */
/ After the original set of tables has been re-created we */
/ use R3 - SYSTEM-CALL (rel 2.2) to generate the screen */
/ and then get the next entry in table H1 to build the */
/ next screen. For releases 3.0 and higher use generate */
/ dynpro. */
FORM RECONSTRUCT_DYNPROS.
LOOP AT H1.
CASE MAIN.
WHEN 'Y'.
if h1-name ne repid.
IF H1-NAME NE R1-NAME.
MOVE H1-NAME TO OLDNAME.
ENDIF.
ENDCASE.
PERFORM RECONSTRUCT_F.
PERFORM RECONSTRUCT_E.
MOVE-CORRESPONDING H1 TO H.
IF MAIN = 'Y'.
move repid to h-prog.
MOVE R1-NAME TO H-PROG.
move repid to dynname.
MOVE R1-NAME TO DYNNAME.
ELSE.
MOVE H1-NAME TO H-PROG.
MOVE H1-NAME TO DYNNAME.
ENDIF.
MOVE H1-NUMBER TO H-DNUM.
WRITE H1-NUMBER TO DYNNAME+40(4).
EXPORT DYNPRO H F E M ID DYNNAME.
SYSTEM-CALL GENERATE-SCREEN DYNNAME. "Up to rel 2.2
GENERATE DYNPRO H F E M ID DYNNAME "R 3.0, 4.0, 4.5
MESSAGE DYNPRO_MESSAGE
LINE DYNPRO_LINE
WORD DYNPRO_WORD.
REFRESH: M, F, E.
CLEAR: M, H, F, E.
ENDLOOP.
ENDFORM.
/ Re-build Fields table */
FORM RECONSTRUCT_F.
LOOP AT F1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING F1 TO F.
APPEND F.
ENDLOOP.
ENDFORM.
/ Re-build Logic table */
FORM RECONSTRUCT_E.
LOOP AT E1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING E1 TO E.
APPEND E.
ENDLOOP.
ENDFORM.
/ scan for included files (Upload) */
FORM SCAN4-INCLUDES.
IF FUNC = 'D'. "Downloads - whole table needs to be scanned
LOOP AT S.
PERFORM SEARCH-FUNC.
ENDLOOP.
ENDIF.
IF FUNC = 'U'. "On upload scan line by line as we are re-building abap
PERFORM SEARCH-FUNC.
ENDIF.
ENDFORM.
/ scan for text INCLUDE xxxxxxxx */
/ reject INCLUDE STRUCTURE as structure not a valid */
/ program name */
FORM SEARCH-FUNC.
CONDENSE S-TXT.
SEARCH S-TXT FOR '.INCLUDE .'.
CASE SY-SUBRC.
WHEN 0.
IF S-TXT+8(9) EQ 'STRUCTURE'
OR S-TXT+8(9) EQ 'structure'
OR S-TXT+8(6) EQ '<ICON>' "rel 3.0c 3.0d
OR S-TXT+8(6) EQ '<icon>'
OR S-TXT+8(6) EQ '<type>'
OR S-TXT+8(6) EQ '<TYPE>'
OR S-TXT+8(9) EQ '<methods>'
OR S-TXT+8(9) EQ '<METHODS>'.
EXIT.
ENDIF.
IF SY-FDPOS EQ 0. "INCLUDE must be in pos 1 (by reason of condense)
PERFORM VALIDATE_INCLUDE.
ELSE.
EXIT.
ENDIF.
ENDCASE.
ENDFORM.
/ Validate INCLUDES . */
FORM VALIDATE_INCLUDE.
SEARCH S-TXT FOR '...' STARTING AT 9 ENDING AT 39.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS.
SEARCH S-TXT FOR '. .' STARTING AT 9 ENDING AT 38.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ENDCASE.
IX = SY-FDPOS.
ASSIGN S-TXT+8(IX) TO <F>.
Now check for Include Mask for example if include mask was set to
Z* then only include programs whose first letter starts with a Z.
1) get length of the INCLUDE program name. Must be less than or
equal 40.
2) Compare it with the Include mask.
3) If Ok add include program name to include table
clear i_include.
move <f> to i_include-name.
CLEAR I_INCL.
SEARCH IMASK FOR '.*.'.
IF SY-SUBRC = 0.
CONDENSE IMASK.
ENDIF.
IF ( <F> CP IMASK OR IMASK = ' ' ).
READ TABLE I_INCL WITH KEY = <F>.
IF SY-SUBRC NE 0.
MOVE <F> TO I_INCL-NAME.
move 1 to i_include-count.
collect i_include.
APPEND I_INCL.
ENDIF.
ENDIF.
ENDFORM.
/ Download table S. */
FORM DOWNLOAD_DATA.
CLEAR TXLINE.
WRITE 'Downloading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+12.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
TABLES
DATA_TAB = S.
ENDFORM.
/ Download Binary files H1 */
FORM DOWNLOAD_BIN_H1.
DESCRIBE FIELD H1 LENGTH J.
DESCRIBE TABLE H1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = H1.
ENDFORM.
/ Download Binary files F1 */
FORM DOWNLOAD_BIN_F1.
DESCRIBE FIELD F1 LENGTH J.
DESCRIBE TABLE F1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = F1.
ENDFORM.
/ Upload data from file .EEE */
FORM UPLOAD_EEE.
CLEAR TXLINE.
WRITE 'Uploading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+10.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
MOVE 'Y' TO FIRST-TIME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = S1.
LOOP AT S1.
IF S1-TXT(4) = '????'.
MOVE S1-TXT(8) TO NEW-FUNC.
IF FIRST-TIME = 'Y'.
MOVE S1-TXT(8) TO OLD-FUNC.
MOVE 'N' TO FIRST-TIME.
ELSE.
PERFORM STORE_COMPONENT.
MOVE NEW-FUNC TO OLD-FUNC.
ENDIF.
ENDIF.
IF S1-TXT(4) NE '????'.
PERFORM REBUILD-COMPONENT.
ENDIF.
ENDLOOP.
PERFORM STORE_COMPONENT. "last component still to be processed
PERFORM REBUILD-CUA. "re-build CUA, statuses, pfk etc
ENDFORM.
/ Upload Dynpro headers (HHH) and fields (FFF) */
/ titles and dynpro logic is contained in file .EEE */
/ and has already been processed. */
FORM UPLOAD_HHH.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H2.
LOOP AT H2.
MOVE H2-CNAME TO H1-NAME.
MOVE H2-CNUM TO H1-NUMBER.
MOVE H2-NNAME TO H1-PROG.
MOVE H2-NNUM TO H1-DNUM.
MOVE H2-CTIM TO H1-TGEN.
WRITE '19' TO H1-DGEN(2).
WRITE H2-CDAT TO H1-DGEN+2(6).
WRITE H2-FILL TO H1+88(39).
APPEND H1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H1.
ENDCASE.
LOOP AT H1.
MOVE H1-NAME TO T-NAME.
MOVE H1-NUMBER TO T-NUMBER.
APPEND T.
ENDLOOP.
ENDFORM.
/ Upload Binary file F1 - Dynpro fields */
FORM UPLOAD_FFF.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F2.
LOOP AT F2.
OLD_F1 = F2.
APPEND OLD_F1.
ENDLOOP.
LOOP AT OLD_F1.
MOVE-CORRESPONDING OLD_F1 TO F1.
APPEND F1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F1.
ENDCASE.
ENDFORM.
/ Re-construct data from file .EEE */
FORM REBUILD-COMPONENT.
CASE OLD-FUNC.
WHEN '????LOGC'. "Dynpro LOGIC.
CASE REL3.
WHEN 'X'.
SHIFT S1-TXT+8 RIGHT BY 32 PLACES.
ENDCASE.
MOVE S1-TXT TO E1.
APPEND E1.
/ Load ABAP Source code, CUA, pfkeys etc to int tables */
WHEN '????SRCE'.
MOVE S1-TXT TO S-TXT.
APPEND S.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
if restoring / uploading rel 3.1 or lower different cua tables
are used. At generate CUA time these will be converted by the
system to rel 4.0
WHEN '????STAT'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_STA.
APPEND OLD_STA.
WHEN SPACE.
MOVE S1-TXT TO STA.
APPEND STA.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????FUNC'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_FUN.
APPEND OLD_FUN.
WHEN SPACE.
MOVE S1-TXT TO FUN.
APPEND FUN.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????MEN1'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_MEN.
APPEND OLD_MEN.
WHEN SPACE.
MOVE S1-TXT TO MEN.
APPEND

ABAP code to set Infopackage Monitor to "RED" status?

Hello,
I have an Infopackage that is using ABAP code to determine the selection values dynamically for an Infoobject during the load (Type: 6 ABAP routine). We have built in customer error checking on the selection values based on our requirements.
In the event of an error I need to do the following:
    -Set the 'Total' and 'Technical' color status to "RED" in monitor.
    -Define custom error message in "Status" tab of monitor for load.
Does anyone know how to accomplish this? Links to an example or previous thread will be appreciated.
Thank you,
Brian
Message was edited by:
        Brian

The status of a particular request is stored in the table RSREQDONE. You can have an abap code to modify the entries of the field TSTATUS (technical status of the request) in this table for the given request number.
Example:
Value of @5B@ for this field denotes that this request is successful (GREEN)
FYI, I am not sure how recommendable this process is coz I never implemented before.

How to get remaining time for baton after setting timeOut property

Hello,
Is it possible to get the remaining time for baton after setting timeOut, or do I have to maintain a separate Timer for that?
Been following this excellent tutorial here http://tv.adobe.com/watch/adc-presents/create-shared-forms-in-livecycle-collaboration-serv ice/

Thanks Nigel, before reading your reply, I came up with something like this, but it seems extending the Baton class is not enough, as I would need my own BatonProperty as well that uses this extended Baton class...
Also attempted to get some help here http://stackoverflow.com/questions/7116814/actionscript3-lccs-how-to-access-property-paren t-class-protected-var/7116882#7116882
Could this be made into a feature request for Baton and BatonProperty, se we could easily get the remaining time please? I guess I can wait for a future release.
/custom as file /
package com.mysite.BatonExtender
     import com.adobe.rtc.sharedModel.Baton;
     import flash.events.TimerEvent;
     public class BatonExtender extends Baton
          public function BatonExtender()
          super();
          _autoPutDownTimer.addEventListener(TimerEvent.TIMER,countDown);
          trace("CURRENT TIMER:"+_autoPutDownTimer.currentCount);
          trace("BATONEXTENDER added");
          public function countDown(p_evt:TimerEvent):void {
               trace("TRACING START countDown....");
               if (_autoPutDownTimer.running) {
                    trace(_autoPutDownTimer.currentCount);
                    //sharedTimer.value = String(90 - _autoPutDownTimer.currentCount);
               trace("TRACING END....");

What is the use of a proxy client to test web service from ABAP code?

In NW640, we need to create a proxy client to test our web service from a ABAP code.
Why is this so? What is the significance of a proxy client? Is this mandatory? Can we test the webservice from a ABAP code without proxy client?

Hi Gopal,
There are two types of proxies that can be generated from ABAP - the client proxy (to call an internet web service) and a server proxy (to communicate with XI). It sounds to me like you are looking for information about the client proxy, if so you can see the following link from SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/a68d10f4eb894087fc9c1c3f9ae433/frameset.htm
Hope this helps.
Sudha

How to bypass printer setting using abap code?

Dear All,
I want to bypass printer setting using abap code?
I am printing sticker using a code and i dont want to display printer setting .
I want direct ouput ?
Regards
Steve

Are you using reports or scripts/smart forms? You can use the parameter for no_dialog = space(use the relevant parameter).

Setting value in a cookie using ABAP code

Hai All,
Using ABAP code is it possible to set some value in a cookie.
Regards,
H.K.Hayath Basha.

Hai Durairaj,
Can you explain how to do that.
Regards,
H.K.Hayath Basha.

OPSI setting remain as ABAP code after client deletion

Similar Messages

Maybe you are looking for