OPSM 1.2 [Oracle pedigree and Serialization manager] installation is failed

Hi All,
We are doing OPSM 1.2 installation on Oracle Enterprise Linux 5.6 [64-bit].
Steps we have done:
1. installed 11g db and created repositories for soa server.
2. installed weblogic server 10.3.6
3. Installed soa server & created two managed servers soa_server1 and pas_server1 in weblogic as per the doc " Oracle Pedigree and Serialization Manager Installation Guide"
4. And created required schemas in db for OPSM.
5. and ran $MW_ORA_HOME/common/bin/wlst.sh ./pasMasterInstall.py
Below are The error we are getting at the time of deployment is:
Deploying the PasSerializationManager application...
Deploying application from /u01/ORASOA/Middleware/Oracle_SOA1/pas/applications/install/PasSerializationManager.ear to targets pas_server1 (upload=false) ...
<Dec 19, 2013 7:56:03 AM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, PasSerializationManager [archive: /u01/ORASOA/Middleware/Oracle_SOA1/pas/applications/install/PasSerializationManager.ear], to pas_server1 .>
....................................................................................................No stack trace available.
This Exception occurred at Thu Dec 19 08:01:04 EST 2013.
weblogic.management.scripting.ScriptException: Error occured while performing deploy : The action you performed timed out after 300,000 milliseconds.
Error: Unable to deploy the Ear Files.
Shutting down the AdminServer...
Stopping the AdminServer...
Finished stopping the AdminServer.
Moving the Installed Files to the Install Directories...
Finished moving files to install directory.
Restoring Backup...
Finished restoring backup.
ERROR: Installation Failed!
Note: Please review the above output buffer to determine what error(s)
      have occurred. You must fix any errors before attempting to
      retry the installation.
WARNING: System failed to register the MDS Repository with WebLogic. It is likely
that the MDS Repository has already been registered. Please verify the registered
metadata repositories using Oracle's Enterprise Manager application. Once logged
into Enterprise Manager, expand the Metadata Repositories node and verify an entry
exists for mds-mds-ApplicationMDSDBDS. In addition, click on the repository and
verify it is targeted to the appropriate servers.
Exiting WebLogic Scripting Tool.
<Dec 19, 2013 8:01:09 AM EST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
In pas_server1.log file:
Caused By: oracle.mds.exception.MDSExceptionList: MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "MAR_TargetRepos" is invalid.
MDS-00929: unable to look up name "jdbc/mds/opsm" in JNDI context
Unable to resolve 'jdbc.mds.opsm'. Resolved 'jdbc.mds'
        at oracle.mds.config.PConfig.loadFromBean(PConfig.java:1008)
        at oracle.mds.config.PConfig.<init>(PConfig.java:767)
        at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:1151)
        at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:1218)
        at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:781)
        at oracle.mds.config.MDSConfig.<init>(MDSConfig.java:728)
        at oracle.mds.internal.lcm.deploy.DeployManager.deploy(DeployManager.java:529)
        at oracle.mds.internal.lcm.deploy.DeployManager.startDeployment(DeployManager.java:211)
        at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:215)
        at oracle.mds.lcm.weblogic.WLLifecycleListener.preStart(WLLifecycleListener.java:77)
        at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
        at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
        at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
        at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
        at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Any one please provide resolution to fix the issue.
Thanks
skjb

Have you searched MOS website for (MDS-01370 AND MDS-00929) and go through the docs?
If none of MOS docs help, then please log a SR.
Thanks,
Hussein

Similar Messages

Oracle Identity and Access Management Suite Plus Integration with Oracle ADF

Hi All,
Kindly advice if Oracle Identity and Access Management Suite Plus can be integrated with Oracle ADF based applications to manage the end-to-end lifecycle of user accounts specifically addressing to roles/priviledges and security.
Request you to share links to documentation where I can study the steps to integrate both the frameworks.
Looking forward to hear from you soon.
Best Regards,
Ankit Gupta

Hi Sébastien,
I came across the below link for the required integrations -
Oracle&reg; Fusion Middleware Installation Guide for Oracle Identity and Access Management 11g Release 2 (11.1.2) - …
Oracle&reg; Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management 11g Release 2 (11.1.2) - Co…
Best Regards,
Ankit Gupta

Oracle Identity and Access Management (11.1.1.3.0) and IM difference?

What is difference between Oracle Identity and Access Management (11.1.1.3.0) and Identity Management (11.1.1.3.0) ?
From
http://www.oracle.com/technetwork/middleware/downloads/oid-11g-161194.html

When you run the config, you are asked to add some product. Have checked the "Oracle Access Manager with Database Policy Store" product?
If not, you can add it by extending the domain. Once done you have to start two WLS servers (AdminServer and oam_server1):
Start AdminServer with $DOMAIN/bin/startWebLogic.sh
Start oam_server1 with $DOMAIN/bin/startManagedWebLogic.sh oam_server1
It might be that oam_server1 asks for username and password. This is fine for the first time. During the first start the necessary directory structure is created. Once it came up and enters RUNNING state, kill it and create a file boot.properties in $DOMAIN/servers/oam_server1/security with the entries username=name and password=pw in two lines and start oam_server1 again.
Starting oam_server1 is recommend to get proper values in the oamconsole.
HTH,
--olaf

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

Oracle Change and Configuration Management packs

Hi,
We are looking at implementing the Oracle Change and Configuration Management packs.
I would be very interested to hear from anybosy who is currently using these packs.
I have done some preliminary tests, and am getting what seems like a very simple error, but i am at a loss as to how to fix it.
Will respond to replies with exact error and scenario.
thanks in advance.
melvyn

Hi Nayab,
We are looking to implement the change and configuration management packs, to automate our change control.
As part of my initial testing i have the following scenario...
I have three database (namely TEST_DB, QA_DB and PROD_DB) all configured and manageable in EM.
I have create a sample test schema in TEST_DB with tables, views, sequences, procedures and triggers.
Using EM, i am able to transfer the sample schema (with all objects) from the TEST_DB to the PROD_DB.
If i manually create the sample schema in the QA_DB, i am able to transfer the sample schema from the QA_DB to the PROD_DBm using EM.
When i try to transfer the sample schema from the TEST_DB to the QA_DB i get an error in the synchronization phase.
The capturing of the baseline, and the dictionary comparison phase complete successfully, but when i do the synchronization phase, i get
the follwing error...
SQL> ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
This seems strange because, it must have been able to see the destination database for it to complete the dictionary comparison phase, so
i cannot understand now why it cannot connect to the destination database to complete the synchronization phase.
any assistance would be greatly appreciated.
thanks
Melvyn

How to Integrate Oracle Imaging and Process Management(IPM) 7.7.10 with EBS

Hi All,
We are implementing the following modules from Oracle Content Management to one of our Client, the following are the versions of the tools:
Configure and deploy Oracle Forms Recognition (OFR) 10GR3
Configure the Oracle Adopter for integration of OFR with EBS Version 11.5.10.2
Configure the Adopter for integration of OFR with Oracle Imaging and Process Management (IPM) 7.7.10
I really like to have any technical design document on integrations front, especially from OFR -> EBS and also IPM -> EBS.
Please feel reach me on my following contact details:
[email protected]
Phone: 1865-582-2369
Mobile: 1865-202-6430
Any pointers for the same is well appreciated.
Regards
Chandra

Try replacing the .dll file with the one in your WINDOWS directory. I had that problem and I copied the .dll from C:/WINDOWS/system32 to overwrite the one located in the install directory.

Oracle Lease and Finanace Management

Hi,
Please let me know if the Oracle Finanace and Lease Management module be implemented for a lessee in order to manage their leases.
My client is a car rental company who leases vehicles from the Toyota Finance. There are about 500-600 leases at a given time.
We tried to use the lease management funaciotnality within the Oracle Fixed Assets. However there a limitations when using the fixed assets module to manage the leases. These are such as being unable to update the lease contracts which are in use, not being able to pay out a lease before the end of the lease and there's no facility to upload the leases without having to create them one by one etc.
Can someone please let me know if the Oracle Lease and Finanace Management can be used to manage the leases for this company ( Who is a lessee ) .
And also please let me know the other options available.
Thanks and Regards,
MPH

Hi,
Please see (Note: 811550.1 - How to upgrade WAM on FRS (Form and Report Server, Resin) environment to Full OAS (Oracle Application Server 10g Release 2, non-Resin) environment).
You may also review these docs.
Note: 942124.1 - What are the OAS patches need to be applied before upgrading the WAM patch 1.8.1.1
Note: 850133.1 - Oracle Utilities Work Asset Management v1.8.1
Regards,
Hussein

Oracle Business Approvals For Manager Installation.

I want to install oracle business approvals for manager installation.
Please provide step by step installations document.
Regards,
Kumar V

Hi Kumar;
Please review Steven Chan blog:
https://blogs.oracle.com/stevenChan/entry/oracle_business_approvals_for_managers_iphone_app_now_available
Also see:
http://www.oracle.com/us/products/applications/054244.html
Regard
Helios

Sizing of Oracle IdentityManager and Access Manager on same Weblogic Server

Hi ,
We are planning to deploy Oracle Identity Manager and Access Manager on the same weblogic server in different domains.We have user base of 25000 users.
We can propose two different weblogic servers for OIM and OAM ?
Please let me know the best hardware and software requirements for this installation.
Thanks,
RBM

Here is sizing guide for Oracle Identity Manager
http://www.oracle.com/technetwork/middleware/id-mgmt/oim11g-sizingguide-194346.pdf
You can use it as a guideline, and it refers to 25000 users similar to your requirement. There are other factors also consider like, failover, performance etc. Feel free to reach out if you need more info [email protected]

Oracle Text and Workspace Manager

Has anybody incoroporated Workspace Manager and Oracle text together. How is the Oracle Text index handled? Can users in different workspaces submit documents, have them indexed and be the only ones to see those documents?

Hi,
I do not have much experience with Oracle text, and am unsure exactly how it works. As such, I would suggest to file a TAR requesting this information.
Regards,
Ben

Task dependencies and scheduling in Oracle projects and project management

Am I correct in the belief that Oracle projects/project management does not have the ability to create, manage and track dependencies between tasks in a project ? And to achieve that micro level of planning I need to use something like Microsoft Project Integration ?

Gordon,
Project integration is the link between Oracle Projects and MS Projects.
If you want to define dependencies between tasks, MS Project is best bet
for you.
Cheers,
Gopal
[email protected]
www.sagss.com

ORACLE Work and Asset Management

Hi,
Can I upgrade WAM V 1.7.15.2.3 to 1.8 directly ? If yes, what document and Patch# I need to apply? If no then what would be next patch?
Please let me know which note would be helpful.
Thanks

Hi,
Please see (Note: 811550.1 - How to upgrade WAM on FRS (Form and Report Server, Resin) environment to Full OAS (Oracle Application Server 10g Release 2, non-Resin) environment).
You may also review these docs.
Note: 942124.1 - What are the OAS patches need to be applied before upgrading the WAM patch 1.8.1.1
Note: 850133.1 - Oracle Utilities Work Asset Management v1.8.1
Regards,
Hussein

NAC Server and NAC Manager installation

Hi experts,
When I've tried adding NAC Server to NAC Manager in CAM web management, it prompts: Failed to add server: Could not connect to 10.130.80.81
Is there anything I can do for solving this?
I'm new for NAC Manager and Server installation.
The version using is 4.8.2
BTW, I don't know how to generate SSL certificates (not temporarily) for installation, can anyone help also?
Thanks in advance!
Regards,
Daniel

Hi Daniel,
this is related to the certificate issue.
just generate temp certificate in NAM and NAS.
Export the certificate along with key and store it in different location.
then in SSL option there is trusted certificate authority
load NAS certificate in NAM and NAM certificate in NAS. then try to configure or add NAS to NAM.
it will work.

Oracle 10g and enterprise manager

Hey;
I'm obviously fairly new to the oracle arena, just having passed through a number of courses. I seem to have run into two problems with the installation that have me perplexed. Here are the details for one of them:
I have oracle 10g up and running on an oracle enterprise linux server:
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
oci1 OPEN
The listener is up and running and the oci1 database is dynamically registered:
$ lsnrctl status
[[snip]]
Service "oci1" has 1 instance(s).
Instance "oci1", status READY, has 1 handler(s) for this service...
[[snip]]
I started the dbconsole w/ emctl start dbconsole and it seems to be running:
$ emctl status dbconsole
TZ set to US/Central
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ocidb1.olearycomputers.com:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
When I hit the web page, though, I'm never presented with a login screen and it says my database is down and that the agent can't connect to the instance. When I examine the log that's referenced in the dbconsole status, I see a number of errors such as:
2009-06-09 18:37:10,367 [OmsServiceDriver thread] ERROR conn.ConnectionService v
erifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid user
name/password; logon denied
I saw errors in the emoms.log file related to the sysman user so I unlocked the account.
SQL> select username, account_status
2 from dba_users
3 where username = 'SYSMAN';
USERNAME ACCOUNT_STATUS
SYSMAN OPEN
That didn't do the trick because not very long after, the account is relocked:
SQL> select username, account_status
2 from dba_users
3 where username = 'SYSMAN';
USERNAME ACCOUNT_STATUS
SYSMAN LOCKED(TIMED)
and, instead of the wrong userid/password, I'm getting errors about
2009-06-09 22:04:58,586 [HttpRequestHandler-22472173] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-28000: the account is locked
Anyone have any info on what I'm messing up?
Appreciate any info/hints/tips/suggestions (as long as they're not "go back to unix admin") :)
Doug O'Leary

Hey;
Thanks again for the response. I tried dropping the repository and got a whole bunch of errors. While attempting to enable the sysman account, I realized that my password contained some characters that have special meaning for oracle and I think that's what was throwing it. The errors with the repository convinced me to try one more reinstall. Bit overkill, perhaps, but that's the whole point of a practice box. Once the database was up and running, teh enterprise manager is fully functional.
Now that I think about it, I wonder if that password could be responsible for my other schema issue as well...
Thanks again; I appreciate your time and patience.
Doug O'Leary

Oracle EM and OVM management--where to start?

We are interested in evaluating EM for OVM control, but after a quick glance through the docs it's by no means clear how to start. We have not used EM before this and it's a daunting prospect.
What I'm interested to know is:
1. What is the minimum amount of parts I need to download and install to get OVM management under EM working for a simple environment?
2. Does it really require a full oracle DB installation or will it work with XE?
3. What plugins and agents etc. are/are not required?
It looks simple enough on paper but the EM framework has an enormous amount of apparatus most of which it seems we don't need.
Any pointers greatly appreciated!
Charles Meo

First this is such task where you will learn more but sorry to say it will also take Time. This is not one/two days task.
Yes how to start
==========
I will suggest first dont go with user guides/Implementation Guide, for newbie they are little bit hard as my understanding.
Read small Blogs/Articles and have fast understanding and then go with user guides/Implementation Guide .
These are some article are there web that can hep you
http://apps2fusion.com/apps/oracle-hrms/26-payroll-functional
http://apps2fusion.com/at/85-daxesh/510-accrual-absence-hr-payroll-r12
Thanks

OPSM 1.2 [Oracle pedigree and Serialization manager] installation is failed

Similar Messages

Maybe you are looking for