OpsMgr 2012 R2 environment, reports in newly imported MPs not deploying to reporting services

We have an OpsMgr 2012 R2 environment that has been up and running for several months now. Recently we attempted to import a new MP with reports (the Veeam Report Library) - the import was successful, but the Veeam folder and reports never appear in the
OpsMgr reporting console or in the report server web page, even after waiting several hours and even overnight.
We have deleted and reimported the MP with no luck. We have restarted the SRS server with no luck. We have scoured the logs of the servers and found no events that appear to be related, and there are no health states or alerts in OpsMgr indicating any issues.
We also tried importing a new, different management pack with reports (Windows Logical Disk extension pack) and those reports also have not shown up.
Note that for both MPs the associated rules/monitors show up as expected, it is only the reports that are an issue. Also, all the previously imported reports are still available and functioning normally, it's only newly-imported reports that are failing
to show up.
We previously imported dozens of MPs with no issues and there have been no configuration changes to the environment. With no OpsMgr alerts or health issues, and no seemingly related event log entries we're not sure where to check next to see the progress,
status, and issues with report deployment, any help in pointing us in the right direction is appreciated.

Hi,
Would you please restart data access service and system center management configuration service to check the result?
In addition, have you checked the operation manager event logs with event viewer, we may find helpful information there to troubleshoot this issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • Newly imported thumbnails not showing previews

    Today when I was importing images off a memory card I noticed the thumbnails in library mode were not showing any previews, they were blank (gray) for only the recently imported items.  My other folders' thumbnails are showing previews with no issue.
    I am working in Lightroom 4.  I am using Windows 8 on a HP laptop.
    A couple of other notes about what I noticed...
    1.  In the import screen the thumbnails display the preview.
    2.  Once the import goes to the Library Mode - thumbnails are blank.  Can only see the image number and any symbols indicating tags or changes to the image.
    3.  Loupe view I cannot get an image to appear.
    4.  In the Develop Mode if I click on a thumbnail down in the filmstrip (which are all blank) an image will appear in the work area and the filmstrip thumbnail will display a preview of the one I selected.  The thumbnail preview will remain visible for a few moments after moving to a new image.  Then it just goes blank again.
    5.  I was importing jpegs and dngs.  Having the same problem with both of these today. 
    6.  All the other thumbnails in folders that were in the catalog prior to today are visible and working normally.
    I am wondering how to fix this problem of newly imported images not displaying an image in the thumbnail whether it is in Library Mode, Loupe View, or Develop mode.
    Thank you for any help you can provide.

    I'd delete the preview cache and rebuild - that may help (or it may not).
    To do so, exit Lightroom, then delete .lrdata folder alongside .lrcat file.
    PS - delete entire .lrdata folder, but do NOT delete .lrcat file or anything else.
    (if it has 'Smart Previews' in the filename, don't delete it - just delete the other one).
    Then, re-open Lightroom and rebuild previews using Library - Previews menu (optional, but probably worthwhile).
    If no better, then you have an system/app problem as opposed to a preview-data problem.
    Rob

  • Newly imported pictures not appearing in iPhoto '08 Library

    So, while I was importing a whole slew of photos today, iPhoto became unresponsive (I think because of two RAW images I inadvertantly left on the camera).  I had to force quit iPhoto and when I relaunched it, none of the photos imported show up in my library.  They are available if I browse "All Images," but if I try to drag and drop any of them into the iPhoto Library it says they're already there. 
    Advice?

    Never access photos that are managed by iPhoto in your All Images search. It's a good way to damage your Library.
    Surefire fix: restore from back up.
    Other than that:
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • IPhoto not registering newly imported photos not in library folders

    I have a 2010 Mac Mini using Lion and iPhoto '11 and a Late 2007 Macbook using Lion and iPhoto '09 that are having similar issues. When I upload new photos into iPhoto the originals (Masters) folder and Modified folder are not being updated with the new photos. I can see them and edit them and they sync with myiPhone. Yet, everytime I upgrade or restore from a time machine backup it corrupts almost all the photos from Dec 2010 to YTD 2011. I'm not sure why this is broken the way it is but hoping someone here may know why it's doing this.

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

  • Newly imported albums not showing up on aTV

    I am running iTunes 9.0 on a Mac Mini and aTV 2.4. I do not store any content physically on the aTV drive. I stream everything wirelessly from iTunes. All of the albums, artists, etc. that were in my iTunes library when I first set up my aTV are showing up in the My Music section of my aTV; however, I just added a few new albums to my iTunes library and they are not showing up anywhere on the aTV. I would think that the aTV would automatically refresh its list to mirror what is in my physical iTunes library on the Mac Mini, but obviously it is not doing that. How do I get it the aTV to refresh what it's list so that my new imports show up?
    Thanks in advance for your help!

    bmoore11 wrote:
    So this will update the list even though I'm technically not syncing (i.e. transferring) files to my aTV?
    yes

  • Newly imported site not showing

    I've imported an existing website into Dreamweaver and am not seeing anything in my index.html.  I see that more files and folders have been added to my local site folder, but am not sure where to go from here.  The /htdocs folder from the remote site (which is where I was told by previous designer that everything lived) is not listed as a folder in my new local site.  I did a "get" entire site, and thought, from the doc  that the folder structure would be maintained. Any advice on next step? 

    I think the solution is a matter is simply not having your site definition set up properly. Here is a great short tutorial from Lynda.com that takes you through the steps. Have a look at it and see if you can find any clues.
    http://tv.adobe.com/#vi+f1592v1760
    Brad Lawryk
    Adobe Community Expert, Dreamweaver
    Adobe Usergroup Manager, Northern British Columbia Adobe User Group

  • Report Logo - Displays on HTML, not on PDF report

    Hello once again Gurus.
    We have a system environment setup where we have BI Publisher Enterprise and Apex 3.1.2 talking together to create PDF reports on a Oracle 10g database (R2 I think, I'm uncertain). As part of a business requirement, depending on what project you are looking at within our apex application, when printing a report you see a logo specific to the project. We have already developed this using a RTF template with a dummy image embedded, and +url:{concat(.//URL,.//PROJECT_ID)}+ in the Alternative Text field of the Web tab of the Format Picture dialogue.
    This worked fine when using the RTF templates as Report Layouts within Apex and as templates within a BI Publisher report.
    However, now logos aren't appearing.
    I am not sure if we have upgraded the version of BI Publisher, but we are running Apex 3.1.2.00.02 on Dev and Apex 3.1.1.00.09 on test and prod, however none of these environments are outputting logos in the PDF reports.
    Curiously, if I go into the BI Publisher interface and ask for the report to be outputted as HTML, the image shows. Running the HTML version of the report from Apex also shows the logo -- but the logo isn't showing in the PDF reports.
    As I continue trouble shooting, any assistance would be greatly appreciated.
    Edit: We are on BIP 10.1.3.2

    If anyone could give us any insight on this, it would be appriciated.
    I'm unsure if its a permissions problem with the PDF seeing the image, or something related to server setup. We currently have a redirect in place to production that doesn't include the :7777 in the URL, and for some reason, if the G_URL for the image is changed to this portless URL, the image is embedded. However, this redirect was in place for another application, and will soon be locked down, so is not available for a long term solution to this problem

  • Report Logo - Displays on HTML, not on PDF report  (Apex report_)

    Hi Gurus.
    I thought I'd report this here, as we are having a BI Publisher error, and I'm not getting any help on the Apex subforum.
    +We have a system environment setup where we have BI Publisher Enterprise and Apex 3.1.2 talking together to create PDF reports on a Oracle 10g database (R2 I think, I'm uncertain). As part of a business requirement, depending on what project you are looking at within our apex application, when printing a report you see a logo specific to the project. We have already developed this using a RTF template with a dummy image embedded, and url:{concat(.//URL,.//PROJECT_ID)} in the Alternative Text field of the Web tab of the Format Picture dialogue.+
    This worked fine when using the RTF templates as Report Layouts within Apex and as templates within a BI Publisher report.
    However, now logos aren't appearing.
    We are on  BIP 10.1.3.2 according to the Help File, and we are running Apex 3.1.2.00.02 on Dev and Apex 3.1.1.00.09 on test and prod, however none of these environments are outputting logos in the PDF reports.
    Curiously, if I go into the BI Publisher interface and ask for the report to be outputted as HTML, the image shows. Running the HTML version of the report from Apex also shows the logo -- but the logo isn't showing in the PDF reports.
    As I continue trouble shooting, any assistance would be greatly appreciated.

    If anyone could give us any insight on this, it would be appriciated.
    I'm unsure if its a permissions problem with the PDF seeing the image, or something related to server setup. We currently have a redirect in place to production that doesn't include the :7777 in the URL, and for some reason, if the G_URL for the image is changed to this portless URL, the image is embedded. However, this redirect was in place for another application, and will soon be locked down, so is not available for a long term solution to this problem

  • Can not deploy a report using JDBC connection on CR2008 Server

    Hi Group,
    I have a report created with JDBC connection. When I tried to add it to CR2008 server, it gives an error - "An unexpected error has occurred ". Basically I want to add a report to a public folder via CMC. I am using adminstrator account.
    Then I thought I need to add JDBC driver into CR2008 server. so I put oracle jdbc jar into CR2008 server classpath and add JDBC connection info into CRConfig.xml. but I still got the same error.
    I also tried:
    - Change the report to use native Oracle driver rather than JDBC. The deployment succeeded (but this is not what I want)
    - Add a data source connection via Business View Manager, but no luck.
    I know how to use/change jdbc connection with programtic way, but I just want to know if I want to use built-in components in CR2008 server without any coding the reports can be deployed and managed.
    Thanks in advance.
    Dennis

    Hello Will,
    Crystal Reports supports connections to JDBC/JNDI out of the box, and have done so for a while, whether stand-alone or published to Enterprise.
    To specify where the server would search for the JDBC driver jar files, you'd change the classpath tag found in the CRConfig.xml file found on the machine where the Crystal Reports Page or Job Server is running. 
    For early Crystal Enterprise 10 and before, it used Java Native Interface (JNI) to start the Java process to retrieve the data from the JDBC connection.
    For later Crystal Enterprise 10 and later, it starts off a "Java Server" process, and communicates to the Crystal Reports process via CORBA TCP/IP connection.
    Commonissues that may arise:  (1) CRConfig.xml not configured properly, (2) unable to start or communicate to the "Java Server" because of permissions or firewall.
    Note that this is a separate connectivity map from using ADO or ADO.NET.
    Sincerely,
    Ted Ueda

  • Report with type Import

    Dear MDM Experts,
    I would like to use MDIS to import files. The strange problem is, that the Reports (Console/Admin/Reports) with type Import doesn't show their Reports Details. The Reports with other types work fine.
    An other tiresome working is when the port becomes blocked, and I use the Import Manager to fix the problem of the port, I have to set all the mapping, because the source file name is other (date and time of import is before its previous name), so the saved map can't recognize it.
    Please help me, if you have been met these problems!
    Thanks and regards,
    Ádá

    Hi Adam,
    one way to see it:
    set
    Verbose=0xFFFF
    as shown in chapter : MDM Import Server logging of
    HowToMonitorMDM_SP04.pdf
    from this zip file
    https://websmp203.sap-ag.de/~sapidb/011000358700000394322007E
    run your import and then check
    exception folder
    inside you will find xml files - open them and check for XSD file link inside it
    (search for this xsd file on your MDM server) and put it inside
    the folder where this xml file was placed
    now open XML once more and you should see HTML type import log
    Regards,
    michal

  • Can not run complex report with ReportClientDocument using POJO beans.

    Hi All,
    Any help would be very appreciated I have been stack on this issue for the last 4 hours.
    My report has parameters, a ResultSet and subreports that themselves have both parameters and ResultSet.
    The report runs well in Crystal Report Designer but not on my application with ReportClientDocument API.
    The excpeiton I am getting is:
    ======================================================================
    Caused by: java.lang.NullPointerException
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.do(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.bs.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.bs.byte(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.a3.if(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.r.else(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.r.for(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.proxy.remoteagent.h.for(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
    16:22:56,796 INFO  [STDOUT]      at com.tramada.documents.businessobjects.BODocumentProvider.generateDocument(BODocumentProvider.java:178)
    16:22:56,796 INFO  [STDOUT]      at com.tramada.documents.service.impl.DocumentServiceImpl.generateDocumentContent(DocumentServiceImpl.java:125)
    16:22:56,796 INFO  [STDOUT]      ... 58 more
    This is my class that is trying to do the work.:
    ======================================================================
    BODocumentProvider.java Created on 19/05/2008
    This software is the confidential and proprietary information of Tramada
    Systems Pty Limited.
    package com.tramada.documents.businessobjects;
    import java.io.ByteArrayInputStream;
    import java.util.List;
    import java.util.Locale;
    import com.businessobjects.samples.pojo.POJOResultSetFactory;
    import com.crystaldecisions.sdk.framework.CrystalEnterprise;
    import com.crystaldecisions.sdk.framework.IEnterpriseSession;
    import com.crystaldecisions.sdk.occa.infostore.IInfoObject;
    import com.crystaldecisions.sdk.occa.infostore.IInfoObjects;
    import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
    import com.crystaldecisions.sdk.occa.managedreports.IReportAppFactory;
    import com.crystaldecisions.sdk.occa.report.application.ISubreportClientDocument;
    import com.crystaldecisions.sdk.occa.report.application.ParameterFieldController;
    import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
    import com.crystaldecisions.sdk.occa.report.application.SubreportController;
    import com.crystaldecisions.sdk.occa.report.data.Fields;
    import com.crystaldecisions.sdk.occa.report.data.IField;
    import com.crystaldecisions.sdk.occa.report.data.ITable;
    import com.crystaldecisions.sdk.occa.report.data.Tables;
    import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
    import com.crystaldecisions.sdk.occa.report.lib.IStrings;
    import com.tramada.core.utils.SoftMap;
    import com.tramada.documents.DocumentDataProvider;
    import com.tramada.documents.DocumentDescriptor;
    import com.tramada.documents.DocumentFormat;
    import com.tramada.documents.DocumentProvider;
    import com.tramada.documents.SubDocumentDescriptor;
    import com.tramada.documents.businessobjects.model.Template;
    import com.tramada.documents.model.DocumentContent;
    import com.tramada.persistence.home.GenericHome;
    Business Objects specific Document Provider.
    public class BODocumentProvider implements DocumentProvider {
        private static final String BO_AUTH_TYPE = "secEnterprise";
        private boolean connect;
        private String userName;
        private String userPassword;
        private String boURL;
        private String documentsFolder;
        private GenericHome home;
    Local cache. Keeps track of document source for better performance.
        private SoftMap<String, ReportClientDocument> cachedSources = new SoftMap<String, ReportClientDocument>();
        // SETTERS & GETTERS
        // SETTERS & GETTERS
        public GenericHome getHome() {
            return home;
        public void setHome(GenericHome home) {
            this.home = home;
        public boolean getConnect() {
            return connect;
        public void setConnect(boolean connect) {
            this.connect = connect;
        public String getBoURL() {
            return boURL;
        public void setBoURL(String boURL) {
            this.boURL = boURL;
        public String getUserName() {
            return userName;
        public void setUserName(String userName) {
            this.userName = userName;
        public String getUserPassword() {
            return userPassword;
        public void setUserPassword(String userPassword) {
            this.userPassword = userPassword;
        public String getDocumentsFolder() {
            return documentsFolder;
        public void setDocumentsFolder(String documentsFolder) {
            this.documentsFolder = documentsFolder;
        // PUBLIC INTERFACE
    Generates a document given its descriptor.
    @param descriptor
               valid document descriptor
    @return Document (generated document).
        public DocumentContent generateDocument(DocumentDescriptor descriptor, DocumentFormat format) throws Exception {
            if (descriptor == null) {
                throw new IllegalArgumentException("descriptor==null");
            if (format == null) {
                throw new IllegalArgumentException("format==null");
            // get the document source.
            // Can not use setDataSource() error code 2147483648?
            ReportClientDocument document = getDocument(descriptor.getDocumentName());
            ParameterFieldController parameterController = document.getDataDefController().getParameterFieldController();
            // insert the main document parameters and there values
            populateParameters(document.getDataDefController().getDataDefinition().getParameterFields(),
                    parameterController, descriptor, "");
            // insert into the main document all the required data.
            Tables tables = document.getDatabaseController().getDatabase().getTables();
            for (int i = 0; i < tables.size(); i++) {
                ITable table = tables.getTable(i);
                String tableAlias = table.getAlias();
                DocumentDataProvider provider = descriptor.getDocumentDataProvider(tableAlias);
                POJOResultSetFactory factory = new POJOResultSetFactory(provider.getDataType());
                document.getDatabaseController().setDataSource(factory.createResultSet(provider.getData()), tableAlias,
                        tableAlias);
            // go through all the sub-documents and do the same thing as for the
            // main document.
            SubreportController subReportController = document.getSubreportController();
            IStrings names = subReportController.getSubreportNames();
            for (int i = 0; i < names.size(); i++) {
                String subDocumentName = (String) names.get(i);
                SubDocumentDescriptor subDescriptor = descriptor.getSubDocument(subDocumentName);
                // get the actual sub document.
                ISubreportClientDocument subDocument = subReportController.getSubreport(subDocumentName);
                // insert the subdocument parameters.
                populateParameters(subDocument.getDataDefController().getDataDefinition().getParameterFields(),
                        parameterController, subDescriptor, subDocumentName);
                // insert into the main document all the required data.
                Tables subTables = subDocument.getDatabaseController().getDatabase().getTables();
                for (int j = 0; j < subTables.size(); j++) {
                    ITable subTable = subTables.getTable(j);
                    String tableAlias = subTable.getAlias();
                    DocumentDataProvider subProvider = subDescriptor.getDocumentDataProvider(tableAlias);
                    POJOResultSetFactory subFactory = new POJOResultSetFactory(subProvider.getDataType());
                    subDocument.getDatabaseController().setDataSource(subFactory.createResultSet(subProvider.getData()),
                            tableAlias, tableAlias);
            // generate the report in the specified format
            ByteArrayInputStream bais = (ByteArrayInputStream) document.getPrintOutputController().export(
                    getReportFormat(format));
            byte[] content = new byte[bais.available()];
            bais.read(content);
            return (new DocumentContent(content));
    Refreshes the connector and all its cached document sources.
        public void refresh() throws Exception {
            cachedSources.clear();
        // PRIVATE ROUTINES
    Populates the document parameters with there values.
        private void populateParameters(Fields parameters, ParameterFieldController controller,
                DocumentDescriptor descriptor, String documentName) throws Exception {
            for (int i = 0; i < parameters.size(); i++) {
                IField parameter = parameters.getField(i);
                String parameterName = parameter.getName();
                if (!descriptor.getParameters().containsKey(parameterName)) {
                    throw new IllegalStateException("missing parameter entry for '" + parameterName + "'");
                Object value = descriptor.getParameter(parameterName);
                if (value != null) {
                    controller.setCurrentValue(documentName, parameterName, value);
    Retrieves the document source. If the source is not cached get it from
    BO. First get the template name that is stored on BO.
        private ReportClientDocument getDocument(String documentName) throws Exception {
            ReportClientDocument source = cachedSources.get(documentName);
            if (source == null) {
                String templateName = getTemplateName(documentName);
                if (userName == null) {
                    throw new IllegalArgumentException("user-name==null");
                if (userPassword == null) {
                    throw new IllegalArgumentException("user-password==null");
                if (boURL == null) {
                    throw new IllegalArgumentException("boURL==null");
                if (documentsFolder == null) {
                    throw new IllegalArgumentException("documents-folder==null");
                // login to BO
                IEnterpriseSession enterpriseSession = CrystalEnterprise.getSessionMgr().logon(userName, userPassword,
                        boURL, BO_AUTH_TYPE);
                IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
                // get the application folder.
                IInfoObjects folders = iStore.query("Select SI_ID From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Folder' And SI_NAME = '"
                        + documentsFolder + "'");
                if (folders.size() != 1) {
                    throw new IllegalStateException("documents folder '" + documentsFolder + "' not found on BO Server '"
                            + boURL + "'.");
                IInfoObject folder = (IInfoObject) folders.get(0);
                // get the document identified by the template name.
                IInfoObjects templates = iStore.query("select SI_ID, SI_NAME From CI_INFOOBJECTS "
                        + "where SI_PROGID = 'CrystalEnterprise.Report' " + "And SI_INSTANCE_OBJECT = 0 "
                        + "And SI_PARENT_FOLDER = " + folder.getID() + " And SI_NAME= '" + templateName + "'");
                if (templates.size() != 1) {
                    throw new IllegalStateException("template with name '" + templateName + "' not found in folder '"
                            + documentsFolder + "'on BO Server '" + boURL + "'.");
                source = ((IReportAppFactory) enterpriseSession.getService("RASReportFactory")).openDocument(
                        ((IInfoObject) templates.get(0)).getID(), 0, Locale.getDefault());
                cachedSources.put(documentName, source);
            return (source);
    Returns the associated template name for the given document descriptor.
        @SuppressWarnings("unchecked")
        private String getTemplateName(String documentName) {
            Template example = new Template();
            example.setDocumentName(documentName);
            List<Template> templates = (List<Template>) home.findByExampleExcludingAssociations(example);
            if (templates == null || templates.size() != 1) {
                throw new IllegalStateException("no template defined for document name '" + documentName + "'");
            return (templates.get(0).getTemplateName());
    Get the equivalent BO format for the given document format.
    @param format
               document format.
    @return ReportExportFormat
        private ReportExportFormat getReportFormat(DocumentFormat format) {
            if (format.equals(DocumentFormat.PDF)) {
                return (ReportExportFormat.PDF);
            } else if (format.equals(DocumentFormat.WORD)) {
                return (ReportExportFormat.MSWord);
            } else if (format.equals(DocumentFormat.EXCEL)) {
                return (ReportExportFormat.MSExcel);
            return (ReportExportFormat.MSWord);
    Best Regards
    Khalef  Bessaih

    Hello,
    If I understand correctly, you create a local report which choose report from Report Server. You have two query parameters in the report which are returned by stored procedure. Currently, you cannot get default values for these parameters when run the report.
    Based on my test, if we haven’t configure these parameter with Available Values, we can reproduce the same issue. Also, caching issue may cause the same issue. If the issue is persist, please delete the corresponding report in the report server. Then, redeploy
    it to check.
    There is a similar issue, you can refer to it.
    http://social.msdn.microsoft.com/Forums/en-US/6a548d65-35d0-4a3e-8b64-3b7b655c76ee/ssrs-2008-report-parameter-default-value-doesnt-work-when-deployed
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Report MPs not appearing

    hi
    i have installed SCSM 2012 datawarehouse server with Reporting services in the same server.
    In SCSM console, reporting tab is not appearing and it says reporting services unavailable error.
    When i see Management packs under Datawarehouse, only two management packs are shown for the query "Report"
    SErvice manager linked reports
    service manager reporting presentation pack
    Other than these two, no other report related mp are shown.
    If i go to properties of MPSync job, there is nothing MP status shown as pending or failed. All says associated.
    This means no reporting MP has been deployed.
    If i see Operations manager event viewer, it gives the below event id
    Cannot connect to SQL Reporting Services Server.  Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Web.Services.Protocols.SoapException: The item '/SystemCenter' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException:
    The item '/SystemCenter' cannot be found.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
       at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
       at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
       at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
       at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
       at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
       at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
       at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
       at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup()  Remediation
    I was able to connect to the Reporting services url which i have mentioned during SCSM DW installation. The service also started and running.
    What could be the reason for not deploying the reporting MPs?
    regards Sundaresan.C

    Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Web.Services.Protocols.SoapException:
    The item '/SystemCenter' cannot be found. --->
    Can't find the System Center Folder in SSRS. possible it was manually deleted before deployment was complete?

  • Crystal Reports XI - The memory could not be "written"

    Post Author: neildittmar
    CA Forum: General
    We develop and distribute applications using Crystal Reports XI via the RDC component in Visual Basic 6 under Windows XP (SP2).  One of our clients is having issues when launching Crystal Reports from an application.  The data for the report is processed for a period of time, but eventually a Windows error is returned indicating:  The memory could not be "written"
    It is important to note that this report is very data heavy and can produce a 500 page report.  Upon some analysis we've done on-site, we've found that a local administrator can run this report successfully multiple times without receiving the above mentioned error.  However, a user account that is much more restricted in regards to Windows file permissions consistently receives the error.  The clients IT department uses a computer management software that severely limits what individual user accounts have access to on their workstations.
    Our questions are as follows:
    1.  What folders on the client PC are utilized when generating a Crystal Report utilizing the RDC from a Visual Basic 6 application?  From what we can tell, .TMP files are written to the Local Settings\Temp folder of the User account under "Documents and Settings", but it also appears that these files can be written to the root C: drive as well as other places.
    2.  Does Crystal Reports XI require local administrator access on the workstation for users who execute programs utilizing it?

    Thank you,
    I doubt i am able to connect to the same database instance from forms builder 10g but not with forms 6i.I thought it is compatibility of 10g database with forms 6i but that is also not true i am able to connect other 10g database instance with forms 6i builder.
    Is the error is due to improper installation of database instance??
    Thanks

  • Date not showed when report is viewed in PDF .

    Hi,
    We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
    Totally there are four pages for the report.

    I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
    I have chatted with Oracle Support, and they will not address it with a patch for now.

  • A report that uses tablix returns error when trying to deploy to Report Server 2005

    We have some reports that have been built using tablixes, and tested in a 2008 Report Server. When trying to deploy to Report Server 2005 (don't ask why) we get an error saying
    The report definition is not valid. Details: The element 'ReportItems' in namespace 'XXXXXX' has invalid child element 'Tablix'
    So.. what is the issue? I guess 2005 does not support tablixes.. And we cannot upgrade the server version. So the real question is.. is there a workaround for this to avoid having to remake those reports for 2005??
    Thanks!
    Juan Pablo Realini .Net Developer in developement, musician, Star Wars fan, married, father of 2 1/2

    Hi Shei Pi,
    Unfortunately Microsoft provide upgrade option only, not downgrade  .
    SSRS 2005 report can be seen in 2008.. but 2008 report cant seen in 2005.
    One guy created the utility which is paid, to convert the report from 2008 version to 2005.
    You can see similar thread in MSDN here, you can find the paid utility  link also for this issue.
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/bc5fbe11-531a-4a9d-861f-24625a9f4599/converting-rdl-file-of-ssrs-2008-to-ssrs-2005
    Thanks
    Prasad

Maybe you are looking for