OpsMgr EventId 26007 on Domain Controllers "The EventLog service reported that the Security event log on computer ' ' is corrupt."
Hi,
We are receiving several eventids '26007' from the OpsMgr log on our Domain Controllers, also eventids '26008' with similar description are logged
The EventLog service reported that the Security event log on computer '<Domain Controller Computer>' is corrupt. The Windows Event Log Provider will attempt to recover by re-opening log.
I'll appreciate any suggestion in order to solve this issue.
Regards.
I guess this issue is caused by event ID 4661 is corrupted in security event log.
Please check if you have many 4661 events in security event log and XML view cannot be viewed.
Running the below command on DC will disable the auditing of the SAM Object access. This should stop the Event ID 4661 from being logged which should stop the Alert regarding corrupt Event log:
auditpol /set /subcategory:"SAM" /success:disable /failure:disable
Regards,
Similar Messages
-
My KMS server is running on Windows Server 2012 R2 and activated by Server 2012 KMS Key.
I would like to use the KMS server to activate many Windows 2008 R2 server, however, Error message "0xC004F050 The software licensing service reported that the product key is invalid" is appear when adding Windows Server 2008R2 KMS Key. The Windows
Server 2008 R2 KMS key is confirmed and validated by Microsoft Telephone service.
Command used:
slmgr /ipk <Windows Server 2008 R2 KMS Key>
Anyone can help? thanks.Hi Samson,
Based on my research, we need to choose associated KMS key based on the highest product being deployed in the product grouping hierarchy.
To choose the right Volume License key, please refer to this article:
How to Choose the Right Volume License Key for Windows
Please type the cmd "slmgr /dlv" on KMS Host and check if it has been activated successfully.
After configure KMS host, By default these KMS client computers will query DNS and locate your KMS host and activate
KMS Client Setup Keys
To reset computers to be KMS clients type the following at elevated command prompt:
Slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
Where xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is the generic VL key from the following link.
https://technet.microsoft.com/en-us/library/jj612867.aspx
For more detailed information to activate KMS client, please refer to the article below:
Installing KMS Hosts
Configuring KMS Clients
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for thisThanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.
-
I have configured the Default Domain Controller's policy to log SUCCESS for Account Logon Events in the Server 2008 R2 Domain Controller, but these events are not logging in the Security Event log.
Default Domain Controllers Policy
Computer Configuration/Windows Settings/Security Settings/Local Policies/Audit Policies/Audit Account Logon Events = Success.
What tools can I use to troubleshoot this further? The results of "Auditpol.exe /get /category:*" are below.
System audit policy
Category/Subcategory Setting
System
Security System Extension No Auditing
System Integrity No Auditing
IPsec Driver No Auditing
Other System Events No Auditing
Security State Change No Auditing
Logon/Logoff
Logon No Auditing
Logoff No Auditing
Account Lockout No Auditing
IPsec Main Mode No Auditing
IPsec Quick Mode No Auditing
IPsec Extended Mode No Auditing
Special Logon No Auditing
Other Logon/Logoff Events No Auditing
Network Policy Server No Auditing
Object Access
File System No Auditing
Registry No Auditing
Kernel Object No Auditing
SAM No Auditing
Certification Services No Auditing
Application Generated No Auditing
Handle Manipulation No Auditing
File Share No Auditing
Filtering Platform Packet Drop No Auditing
Filtering Platform Connection No Auditing
Other Object Access Events No Auditing
Detailed File Share No Auditing
Privilege Use
Sensitive Privilege Use No Auditing
Non Sensitive Privilege Use No Auditing
Other Privilege Use Events No Auditing
Detailed Tracking
Process Termination No Auditing
DPAPI Activity No Auditing
RPC Events No Auditing
Process Creation No Auditing
Policy Change
Audit Policy Change No Auditing
Authentication Policy Change No Auditing
Authorization Policy Change No Auditing
MPSSVC Rule-Level Policy Change No Auditing
Filtering Platform Policy Change No Auditing
Other Policy Change Events No Auditing
Account Management
User Account Management No Auditing
Computer Account Management No Auditing
Security Group Management No Auditing
Distribution Group Management No Auditing
Application Group Management No Auditing
Other Account Management Events No Auditing
DS Access
Directory Service Changes No Auditing
Directory Service Replication No Auditing
Detailed Directory Service Replication No Auditing
Directory Service Access No Auditing
Account Logon
Kerberos Service Ticket Operations No Auditing
Other Account Logon Events No Auditing
Kerberos Authentication Service No Auditing
Credential Validation SuccessHi Lawrence,
After configuring the GPO, did we run command gpupdate/force to update the policy immediately on domain controller? Besides, please run command gpresult/h c:\gpreport.html to check if the audit policy
setting was applied successfully.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
Revision: 13027
Revision: 13027
Author: [email protected]
Date: 2009-12-16 18:09:46 -0800 (Wed, 16 Dec 2009)
Log Message:
Fix bug in SerialElement where the durationReached event was dispatched on a child-to-child transition due to the base class thinking that the duration had been reached (since the second child didn't have a duration yet). Injection from trait refactoring.
Modified Paths:
osmf/trunk/framework/MediaFramework/org/osmf/composition/CompositeTimeTrait.ashttp://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
Data Access Service is unable to log audit events to the security event log
Hi,
Scenario: SCOM 2012 R2 UR4. (Windows 2012 R2)
Today SCOM have generated 4 alerts Data Access Service is unable to log audit events to the security event log.
The service account for "System Center Data Access Service" service is "Local System".
The users at "Generate security audits" are: LOCAL SERVICE and NETWORK SERVICE.
The question is:
how to resolve this alert? (Where look for to obtain more information to resolve this problem)
Thanks in advance!Local system account is differet to local service account. Fo detail description of these accounts, pls. refer
LocalService Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684188(v=vs.85).aspx
LocalSystem Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684190(v=vs.85).aspx
Generate security audits which is under Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment of Group policy, determines which accounts can be used by a process to add entries to the security log. This user right
is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. By default, only the LocalSystem account has the privilege to be used by processes to generate security audits.
For identified the SDK account
1) open services.msc
2) From the system Center Data Access Service, you can see the SDK logon on as account
Roger -
Greetings,
Trying to export users to an OU in a remote forest AD from FIM 2010 R2 and I keep getting this error back from the destination AD:
"The directory service has exhausted the pool of relative identifiers."
After reading up on this I went back to the AD owners of the forest and they said that they had seen this before and had applied this hotfix from Microsoft to give their RID pool another bit (now making 31bits)...
http://support.microsoft.com/kb/2642658/en-us
Now I can create a user in their AD without a problem within ADSI, but FIM can't; I just get a "cd-error" with the afore-mentioned error description of "The directory service has exhausted the pool of relative identifiers".
I have checked the RID Manager, I have got the dcdiag (below) and everything looks OK except for the fact they have run this hotfix?
Test omitted by user request: Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1073746324 to 2147483647
* XXXXXXX is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1073745324 to 1073745823
* rIDPreviousAllocationPool is 1073745324 to 1073745823
* rIDNextRID: 1073745324
Has anyone come across this issue regarding the hotfix before and, if so, how did you get around this via FIM?
Cheers,The work-around at the moment is to specify the IP address of the RID Pool manager server in the MA's preferred domain controller listing. Still working with the external forest as to why this is failing from the DC we initially connected to.
-
7016 - The Health Service cannot verify the future validity of the RunAs account
Hi,
We have several gateways set up on our other domains (DMZ, Test and Dev) using certificates to connect to the RMS with a few agents reporting to the gateway in it's domain. I am recieving this warning for all gateways and agents that are being monitored (in the other domains). All our servers are either Win 2003 32bit or Win 2003 64bit.
The Health Service cannot verify the future validity of the RunAs account PRODUCTION\username for management group PRODMGMT due to an error retrieving information from Active Directory (for Domain Accounts) or the local security authority (for Local Accounts). The error is The network path was not found.(0x80070035).
From the searching that I've done on the net, a couple of people have mentioned that if you set the password expiration flag on AD users and computers for the account the problem will go away.. This hasn't happened for me.
I have checked the logs on the gateway servers and they report the following messages:
Event Type: Error
Event Source: HealthService
Event Category: Health Service
Event ID: 7016
Date: 15/03/2010
Time: 6:05:25 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service cannot verify the future validity of the RunAs account PRODUCTION\username for management group PRODMGMT due to an error retrieving information from Active Directory (for Domain Accounts) or the local security authority (for Local Accounts). The error is The network path was not found.(0x80070035).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: HealthService
Event Category: Health Service
Event ID: 7020
Date: 15/03/2010
Time: 6:05:25 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service has validated all RunAs accounts for management group PRODMGMT, except those we could not monitor.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
However a few hours later I don't get any error messages and it seems to be working happily.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7026
Date: 15/03/2010
Time: 9:02:28 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service successfully logged on the RunAs account PRODUCTION\username for management group PRODMGMT
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7023
Date: 15/03/2010
Time: 9:02:28 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service has downloaded secure configuration for management group PRODMGMT successfully.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7025
Date: 15/03/2010
Time: 9:02:28 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service has authorized all configured RunAs accounts to execute for management group PRODMGMT.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7024
Date: 15/03/2010
Time: 9:02:28 AM
User: N/A
Computer: DEMOMMS003
Description:
The Health Service successfully logged on all accounts for management group PRODMGMT
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Despite the successful logs that appear the gateway still shows up with the same warning.
If i stop and start the service on the gateway it then shows up as healthy in SCOM, but then the next day it the warning comes back.
Is the problem caused by different domain acounts and when it tries to find it in the domain it can't find it?
Cheers,
PhilI also have the same problem with my scom 2012 system.
I am getting 7021 and 7016 events.
as mentioned by Jonathan, i am able to open notepad with the user account for which we are getting error.
another thing noted, when we run setspn -l domain\acc , we are getting error
Ldap Error(0x51 -- Server Down): ldap_open
or
FindDomainForAccount: Call to DsGetDcNameWithAccountW failed with return value 0x00000525
Could not find account DOMAIN/account
Another point to add, my server is ABC.XXX.company.com and acc i am using us YYY\acc_name. I mean to say my account is of diff domain.
This config is working fine no issues at all in another server which was setup earlier with 2007 r2.
Manish
I recently had the same issue in our Forest. Did you try YYY.company.com\acc_name? If you use the netbios name, setspn (and scom does on account validation as well, if you just pick the domainname from the list) will try to resolve the dc via netbios. Two
alternatives: add the other domain to the dns searchlist for your network adapter (I won't do this one, this does not resolve the cause of the problem) or configure your action accounts with fqdn [email protected] The funny thing is, in scom event
you will see scom validated account "\[email protected]" (still add's the backslash)
Correction: this did not solve the issue as mentioned before, the error reappeared again... :( -
I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill
I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.
-
I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
How can I turn off Event ID 5156 AND 5145 in the Security Event Log?
Hi,
I have a high volume web service. Everytime there is a connection from the outside, it logs this in my security event log.
I want to turn this off.
How can I stop the logging of event id 5156 on the web server and 5145 on the file server?
Thanks!
Dane!Hi,
Thanks for posting in Microsoft TechNet forums.
The problem can be related to Audit settings. Please check the following threads to see if the information can be useful during the troubleshooting:
auditing file share on windows 2008 R2
http://social.technet.microsoft.com/Forums/en-US/winserversecurity/thread/9e633bad-cda6-4ec4-8f04-c01de57ce767
Event ID 5156 filling up event logs. Probably due to anti-virus software (SEP 11)
http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/8044fb62-f5ea-45b5-b717-3f6592af77e0
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here. -
My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?
Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.
-
my mac book was refused by the apple service center as the mother board was crashed , pls help me what to do
If you live in a big city, then I would recommend an independent computer store that fixes Macs. There are many mom and pop computer stores that fix your computer. Just Google it.
Maybe you are looking for
-
My macbook pro (running leopard) recently "locked up" and would not move past the log-in screen. I walked through many steps offered on the apple support pages, ultimately getting to the point where it was suggested I re-install using the original DV
-
Adding new fields in SAP ECC 6.0
Hi All, I have a requirement to add a couple of fields at the item level of ERP Quotation. I would like to know if SAP ECC 6.0 have some tools like EEWB/AET in SAP CRM. Please suggest a solution.. Any Help/Hint highly appreciated, Thanks, Sudeep..
-
Cisco ISE migration from VM to SNS 3415 Appliance
HI Experts, My customer is running a ISE VM ( os is 1.1.1 ) with base license used only for guest authentication . As per the requirement we need to migrate the existing setup to the ISE hardware (1.2 ). Can anyone please help me in the best way t
-
I recently purchased Aperture from App store and this was running fine until I upgraded to Mountain Lion. Now when I start Aperture it asks me for a Serial Number . Where can I find this as it was a download and I have no packaging?
-
Updating external iTunes after Yosemite update
iTunes did not update the external HD where iTunes and all music is stored and accessed. The update placed the new iTunes on the interior hard drive and music is not available. What to do?