OpsMgr SDK Service Event ID: 26319 on RMS
Hi,
On the management server where also SQL Server is installed, i get these errors. I checked the permissions
written in "OpsMgr 2007 SP1 Security account Matrix v1.0.xls" momdatareader permissions seem to be okey.
Whot could be the reason?
An exception was thrown while processing SetupAlertsByCriteriaReaderWithProperties for session ID uuid:d82a3318-7477-4b3f-82bf-306f5b91f0ea;id=1129.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Id='' -- Unrecognized Guid format.Id='' -- Unrecognized
Guid format.).
Hi,
Based on the error message, "Fault Detail is equal to Id='' -- Unrecognized Guid format.Id='' -- Unrecognized Guid format", I would like to suggest you reset the data reader account, or change to another account and check the result.
Here is a thread which tell how to change data reader account, please refer to it:
http://social.technet.microsoft.com/forums/systemcenter/en-US/7d2054e5-2103-41d5-9abc-8848ac4496ce/scom-2007-r2-changing-the-user-account-for-the-data-reader-account
Please also refer to the below link to get more details about data reader account:
http://technet.microsoft.com/en-us/library/hh457003.aspx#BKMK_DataReaderAccount
Regards,
Yan Li
Regards, Yan Li
Similar Messages
-
Critical event Id 26319 OpsMgr SDK Service
Hello,
Every 15 minutes I see an alert 26319 appear in the event viewer on the Management Server.
An exception was thrown while processing GetUserRolesForOperationAndUser for session ID uuid:61430fd3-6107-1bd7-1896-3fe3d2a14a11;id=113.
Exception message: Value does not fall within the expected range.
Full Exception: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromStringSid(String SidString, Int32 lOptions, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.GetScopedRoleAssignmentsForUser(Int32 operationNumericId, String userName)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AuthorizationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.ServiceDataLayer.SecurityConfigurationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy.GetUserRolesForOperationAndUser(Guid operationId, String userName)
Soon afterwards appears the event id 26328 with the message:
"The client has disconnected.
User name: test \ scom
Session ID: uuid: 61430fd3-6107-1bd7-1896-3fe3d2a14a11, id = 114 "
and 26329 with the following message:
"A new client has connected.
User name: test \ scom
Session ID: uuid: 61430fd3-6107-1bd7-1896-3fe3d2a14a11, id = 115 "
I have the SCOM 2012 R2 in Windows 2012 R2, and the database is in another server, and all windows update installed.
This user "test \ scom" is server and scom administrator, and administrator of the server with scom sql.
Does anyone have an idea what could be the problem?
Thank you very much,
RuiVerify that The SDK and Config services should be running
To resolve this issue, you must have populated HtmlContent elements or MamlContent elements. Additionally, you must make sure that you do this before you try to import the management pack from one application to the other.
Also check below links
http://support.microsoft.com/kb/980862
http://social.technet.microsoft.com/Forums/systemcenter/en-US/cf341f81-5744-4478-808d-96dda72a37a4/event-id-26319-on-management-server?forum=operationsmanagergeneral
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Event ID 26319 not sufficient permission
Hi!
At a customer that have SCOM2012 R2 UR2 we get all the time the event 26319 in OpsMgr log. It says that our SCOM action account that the SCOM MS server use don't have the right premission... The session ID uuid is the same all the time.
How can I foundout what the session ID uuid:f6833fd9-caa9-4cf5-8970-b472be75f4f2
is?
What is SCOM trying to do with the action account? What is GetManagedEntitiesByGenericCriteriaAndClassWithInstanceQueryOptions?
See the text message from the event:
An exception was thrown while processing GetManagedEntitiesByGenericCriteriaAndClassWithInstanceQueryOptions for session
ID uuid:f6833fd9-caa9-4cf5-8970-b472be75f4f2;id=1181.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnauthorizedAccessEnterpriseManagementException]:
The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UnauthorizedAccessEnterpriseManagementException: The user
DOMAIN\scom_action_account does not have sufficient permission to perform the operation.).
//Mats AHi,
The user DOMAIN\scom_action_account does not have sufficient permission to perform the operation
Please check your account has the appropriate permission.
OpsMgr security account rights mapping - what accounts need what privileges?
http://blogs.technet.com/b/kevinholman/archive/2008/04/15/opsmgr-security-account-rights-mapping-what-accounts-need-what-privileges.aspx
In addition, I found a related thread for your reference.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c10343c6-96e2-4781-ba7e-a1ba4795b541/event-source-opsmgr-sdk-service-event-id-26319?forum=operationsmanagergeneral
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OpsMgr Config Service stops automatically
There's a fresh installation of SCOM 2007 SP1, SQL database is configured on a separate server. The installation itself goes smoothly without any errors. After installation to RTS OpsMgr Config Service stops automatically, after restart it works for about a minute, then stops again. All the other OpsMgr services work correctly. OpsMgr Config Service and OpsMgr SDK Service are run from the same domain account with Domain Admin rights. OpsMgr Health Service is run from Local System account. Here's what I see in the logs:
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:'Calibri','sans-serif';}
a:link, span.MsoHyperlink
{color:blue;text-decoration:underline;text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;text-decoration:underline;text-underline:single;}
.MsoChpDefault
{font-size:10.0pt;}
@page Section1
{size:612.0pt 792.0pt;margin:2.0cm 42.5pt 2.0cm 3.0cm;}
div.Section1
{page:Section1;}
Application:
Event Type: Information
Event Source: OpsMgr Config Service
Event Category: None
Event ID: 29000
Date: 11/1/2008
Time: 3:22:33 PM
User: N/A
Computer: SS-MSK-A0005
Description:
The description for Event ID ( 29000 ) in Source ( OpsMgr Config Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 11/1/2008
Time: 3:22:50 PM
User: N/A
Computer: SS-MSK-A0005
Description:
EventType clr20r3, P1 microsoft.mom.configservicehost, P2 6.0.4900.0, P3 47b70fb4, P4 system, P5 2.0.0.0, P6 4889de7a, P7 382a, P8 127, P9 system.argumentexception, P10 NIL.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 6d 00 69 00 63 00 .m.i.c.
0018: 72 00 6f 00 73 00 6f 00 r.o.s.o.
0020: 66 00 74 00 2e 00 6d 00 f.t...m.
0028: 6f 00 6d 00 2e 00 63 00 o.m...c.
0030: 6f 00 6e 00 66 00 69 00 o.n.f.i.
0038: 67 00 73 00 65 00 72 00 g.s.e.r.
0040: 76 00 69 00 63 00 65 00 v.i.c.e.
0048: 68 00 6f 00 73 00 74 00 h.o.s.t.
0050: 2c 00 20 00 36 00 2e 00 ,. .6...
0058: 30 00 2e 00 34 00 39 00 0...4.9.
0060: 30 00 30 00 2e 00 30 00 0.0...0.
0068: 2c 00 20 00 34 00 37 00 ,. .4.7.
0070: 62 00 37 00 30 00 66 00 b.7.0.f.
0078: 62 00 34 00 2c 00 20 00 b.4.,. .
0080: 73 00 79 00 73 00 74 00 s.y.s.t.
0088: 65 00 6d 00 2c 00 20 00 e.m.,. .
0090: 32 00 2e 00 30 00 2e 00 2...0...
0098: 30 00 2e 00 30 00 2c 00 0...0.,.
00a0: 20 00 34 00 38 00 38 00 .4.8.8.
00a8: 39 00 64 00 65 00 37 00 9.d.e.7.
00b0: 61 00 2c 00 20 00 33 00 a.,. .3.
00b8: 38 00 32 00 61 00 2c 00 8.2.a.,.
00c0: 20 00 31 00 32 00 37 00 .1.2.7.
00c8: 2c 00 20 00 73 00 79 00 ,. .s.y.
00d0: 73 00 74 00 65 00 6d 00 s.t.e.m.
00d8: 2e 00 61 00 72 00 67 00 ..a.r.g.
00e0: 75 00 6d 00 65 00 6e 00 u.m.e.n.
00e8: 74 00 65 00 78 00 63 00 t.e.x.c.
00f0: 65 00 70 00 74 00 69 00 e.p.t.i.
00f8: 6f 00 6e 00 20 00 4e 00 o.n. .N.
0100: 49 00 4c 00 0d 00 0a 00 I.L.....
Operations Manager:
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 21023
Date: 11/1/2008
Time: 3:31:10 PM
User: N/A
Computer: SS-MSK-A0005
Description:
OpsMgr has no configuration for management group Euroset and is requesting new configuration from the Configuration Service.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
System:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date: 11/1/2008
Time: 3:44:10 PM
User: N/A
Computer: SS-MSK-A0005
Description:
The OpsMgr Config Service service terminated unexpectedly. It has done this 16 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What can the problem be here?Hi,
Since here is the forum for Exchange, we may only be expert on Exchange Monitoring by SCOM related issue. For issue on error event from SCOM 2007,we recommend you to use Newsgroup for Operation Managers 2007 to get relevant help.
http://technet.microsoft.com/en-us/opsmgr/bb839593.aspx?lc=1033
However, base on my experience, the below steps may helpful to you.
1. First please try to check whether Local System has been used as action account.You can follow the article below to change account to “Local System”.
How to Change the SDK and Config Service Accounts in Operations Manager 2007
http://technet.microsoft.com/en-us/library/cc540429.aspx
2. Then please Check Remove sub keys from
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application that refer to OpsMgr Config Service.
3. Please remove OpsMgr Config Service from “Sources” located at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
4. After that please add OpsMgr Config Service to “Sources” at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Operations Manager.
More related information share with you:
Account Information for Operations Manager 2007
http://technet.microsoft.com/en-us/library/bb735419.aspx
Hope it helps.
Xiu -
Event ID: 1418 Operations Manager SDK service threw an exception
Hi
Today we have received the below event in application event viewer. I have checked connector service working without any issues.
We are using SCOM R2 with CU2 and we are using universal connector
Event Type: Error
Event Source: OpsMgr Universal Connector
Event Category: None
Event ID: 1418
Date: 6/14/2012
Time: 5:09:58 AM
User: N/A
Computer: INDRMS1
Description:
2012-06-14 05:09:58.283 [Microsoft.SystemCenter.Interop.Framework.Modules.OpsMgrModule] ERROR Error 1:\nFailure message: Request to update alert ignored due to invalid TimeModified\n0cc6a0f1-08cc-4a44-9c2f-7461c97c9fbd\nMicrosoft.EnterpriseManagement.Common.ConcurrentUpdateException:
Request to update alert ignored due to invalid TimeModified ---> Request to update alert ignored due to invalid TimeModified
--- End of inner exception stack trace ---\n\n
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
Help us to understand/troubleshoot on this issue.
Donald D'souza (http://donald-scom.blogspot.com/)Hi,
Please check if you have applied the following update:
Systems Center Operations Manager 2007 R2 Connectors Cumulative Update 2
http://support.microsoft.com/kb/2274165
If the issue persists, please also check the Event Log on the server and see if there are any related errors.
I also noticed you were using SCOM 2007 R2 Cu2, please try CU6:
OpsMgr 2007 R2 CU6 rollup hotfix ships – and my experience installing it
http://blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspx
Hope this helps.
Thanks.
Nicholas Li
TechNet Community Support -
Event ID 26319 on SCOM 2012 R2 Management server with RMS emulator role
Hi all,
Two weeks ago we've setup a new SCOM 2012 R2 environment.
We now have the problem that event 26319 is logged every 5 minutes.
An exception was thrown while processing GetUserRolesForOperationAndUser for session ID uuid:dca9765e-37a4-40fc-bb9e-575f278447f9;id=63.
Exception message: Value does not fall within the expected range.
Full Exception: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromStringSid(String SidString, Int32 lOptions, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.GetScopedRoleAssignmentsForUser(Int32 operationNumericId, String userName)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AuthorizationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.ServiceDataLayer.SecurityConfigurationService.GetUserRolesForOperationAndUser(Guid operationId, String userName)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy.GetUserRolesForOperationAndUser(Guid operationId, String userName)
In the previous weeks I've imported some management packs and did some changes in the user roles.
I've now deleted all custom created user roles but the event is still being logged.
Where does the 'Value does not fall within the expected range.'
message points to ?
Is this related to a imported MP ? I've deleted the built-in administrator user and replaced it by an admin group.
Where do I start to troubleshoot this issue ?
Kind Regards,
J. MonnensYes, it's related to import MP.
For this issue, KB980862 - Event ID 26319 is logged when you import a management pack in Operations Manager 2007 R2
Also you can check below link
http://thoughtsonopsmgr.blogspot.com/2011/08/eventid-26319-exception-was-thrown.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
I cannot open the SCSM console . I am getting the below error message . I am not sure if its network issue or some thing else. The sdk service will not remain in started state . But when I run telnet on the workflow server , I get the message
that the "connection failed, but Networking team has confirmed that there no acls and all Ports are open . Firewall is turned off. I checked there is connectivity to SQL using ODBC , it works . I am looking into possible SPN Issues ..but not sure its
an spn problem .can someone please help and point me to the correct direction
Env : scsm2012sp1
server :2008r2
Date: 10/22/2014 7:45:32 PM
Application: Service Manager Console
Application Version: 7.5.2905.0
Severity: Error
Message: Failed to connect to server 'server'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:01.0156510. TCP error code 10061: No connection could be made because the target machine actively refused it xx.xx.xx.xx:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it xx.xx.xx.xx:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.LayeredChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConnectInternal(EnterpriseManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://edvxsmbapppu01:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:01.0156510. TCP error code 10061: No connection could be made because the target machine
actively refused it xx.xx.xx.xx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xx.xx..xx.xx:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.LayeredChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConnectInternal(EnterpriseManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xx.xx.xx.xx:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)Yes this is what I keep on getting
Error starting Lfx service. Tried times: 7
Error message:
The Data Access service is either not running or not yet initialized. Check the event log for more information.Stack trace
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(String serverName)
at Microsoft.EnterpriseManagement.SystemCenter.LinkingFramework.MomIntegration.LfxObjects.getServiceManGroup()
at Microsoft.EnterpriseManagement.SystemCenter.LinkingFramework.MomIntegration.LfxObjects.StartMonitoring()
at Microsoft.EnterpriseManagement.Mom.Sdk.Service.LfxSubService.AsyncStartCallback(Object notUsed)Inner exception:
Error message:
Could not connect to net.tcp://localhost:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0157024. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:5724. Stack trace
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.LayeredChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConnectInternal(EnterpriseManagementConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)Inner exception:
Error message:
No connection could be made because the target machine actively refused it 127.0.0.1:5724Stack trace
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout) -
Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li -
Unified Contact Store UCS integration issue - Event Source: LS Storage Service - Event ID: 32043
Experiencing weird issues with getting UCS working in one environment (including OWA/IM and UM). Event Source: LS Storage Service - Event ID: 32043
I've had no issues with UCS in other environments with multiple 2013 Mailbox servers and multiple 2013 CAS servers. This particular environment is having issues. I do have Exchange split with MBX and CAS.
I Followed all procedures from TechNet, NextHop, etc. I am Running same oAuth cert on all exchange and lync boxes.
I still have Lync 2010 and Exchange 2010 in the environment, since I'm in the middle of a coexistence migration but don't really want to cut over to new servers until the Lync 2013 to Exchange 2013 integration is complete and tested.
Test-CsExStorageConnectivity -SipUri [email protected]
Test-CsExStorageConnectivity : ExCreateItem exchange operation failed,
code=574, reason=StoreContext{traceId=[2048369003],
activityId=[53f4e8c5-e7e3-491a-adf4-cef37c517cb4]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
I have had a case opened with MS for weeks now and have torn down and rebuilt the config several times - the certificates should solid all around including using servers' FQDNs in the SN instead of just somewhere in the SAN list and using just the domain as
the SN for the oAuth certs (using the exact same cert on both Lync and Exchange for oAuth)
Any comments would be greatly appreciated
Here are the steps i did on the integration (certificates not included however they are verified)
****************** ON LYNC
Get-CsCertificate -Type OAuthTokenIssuer
Issuer : CN=dc02, DC=domain, DC=com
NotAfter : 11/12/2015 5:38:22 PM
NotBefore : 11/12/2013 5:38:22 PM
SerialNumber : 360000000901D6BF9542A0E971000100000009
Subject : CN=domain.com, OU=IT Department, O="Customer Name",
L=Santa Clarita, S=California, C=US
AlternativeNames : {}
Thumbprint : A42D2481AB68473EB25B78DAB8964ADDFF9F8245
EffectiveDate : 11/12/2013 5:48:30 PM
PreviousThumbprint :
UpdateTime :
Use : OAuthTokenIssuer
SourceScope : Global
Set-CsOAuthConfiguration -Identity Global -ExchangeAutoDiscoverURL 'https://excas02.domain.com/autodiscover/autodiscover.svc'
New-CsPartnerApplication -Identity Exchange -ApplicationTrustLevel Full -MetadataUrl "https://excas02.domain.com/autodiscover/metadata/json/1"
Identity : Exchange
AuthToken : Value=https://excas02.domain.com/au
todiscover/metadata/json/1
Name : Exchange
ApplicationIdentifier : 00000002-0000-0ff1-ce00-000000000000
Realm : domain.com
ApplicationTrustLevel : Full
AcceptSecurityIdentifierInformation : False
Enabled : True
Get-CsOAuthConfiguration
Identity : Global
PartnerApplications : {Name=Exchange;ApplicationIdentifier=00000
002-0000-0ff1-ce00-000000000000;Realm=ushw
orks.com;ApplicationTrustLevel=Full;Accept
SecurityIdentifierInformation=False;Enable
d=True}
OAuthServers : {}
Realm : domain.com
ServiceName : 00000004-0000-0ff1-ce00-000000000000
ExchangeAutodiscoverUrl : https://excas02.domain.com/autodisco
ver/autodiscover.svc
ExchangeAutodiscoverAllowedDomains :
****************** ON Exchange
[Get-AuthConfig
RunspaceId : 2b3c00ee-adbf-45a0-81d1-dc87d1e8aa6f
CurrentCertificateThumbprint : A42D2481AB68473EB25B78DAB8964ADDFF9F8245
PreviousCertificateThumbprint :
NextCertificateThumbprint :
NextCertificateEffectiveDate :
ServiceName : 00000002-0000-0ff1-ce00-000000000000
Realm :
Name : Auth Configuration
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
DistinguishedName : CN=Auth Configuration,CN=Customer,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : Auth Configuration
Guid : db55e975-4986-49b7-a799-15ecb8c40e8f
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Auth-Auth-Config
ObjectClass : {top, container, msExchContainer, msExchAuthAuthConfig}
WhenChanged : 1/28/2014 5:37:30 PM
WhenCreated : 10/8/2013 6:35:32 PM
WhenChangedUTC : 1/29/2014 1:37:30 AM
WhenCreatedUTC : 10/9/2013 1:35:32 AM
OrganizationId :
OriginatingServer : DC04.domain.com
IsValid : True
ObjectState : Unchanged
Set-ClientAccessServer -identity excas02 -AutodiscoverServiceInternalUri 'https://excas02.domain.com/autodiscover/autodiscover.xml'
Get-ClientAccesSserver excas02 | fl
RunspaceId : 568a785b-b51f-459a-abf2-d7283744a84a
Name : EXCAS02
Fqdn : EXCAS02.domain.com
OutlookAnywhereEnabled : True
AutoDiscoverServiceCN : EXCAS02
AutoDiscoverServiceClassName : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri : https://excas02.domain.com/autodiscover/autodiscover.xml
AutoDiscoverServiceGuid : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope : {West}
AlternateServiceAccountConfiguration :
IsOutOfService : False
WorkloadManagementPolicy : DefaultWorkloadManagementPolicy_15.0.505.0
Identity : EXCAS02
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=EXCAS02,CN=Servers,CN=Exchange Administrative Group
(FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Customer,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Guid : 2d3b4138-a933-46e1-b5da-3f7115cb5d00
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 1/30/2014 11:35:25 AM
WhenCreated : 10/8/2013 7:06:35 PM
WhenChangedUTC : 1/30/2014 7:35:25 PM
WhenCreatedUTC : 10/9/2013 2:06:35 AM
OrganizationId :
OriginatingServer : DC04.domain.com
ObjectState : Unchanged
cd "C:\Program Files\Microsoft\Exchange Server\V15\Scripts\"
.\Configure-EnterPrisePartnerApplication.ps1 -AuthMetadataUrl "https://lyfe02.domain.com/metadata/json/1" -ApplicationType Lync
Creating User <LyncEnterprise-ApplicationAccount> for Partner Application.
Created User <domain.com/Users/LyncEnterprise-ApplicationAccount> for Partner Application.
Assigning role <UserApplication> to Application User <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Assigning role <ArchiveApplication> to Application User <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Creating Partner Application <LyncEnterprise-dd9f8b8f52fd4b4fb5f928a0d4a02b9c> using metadata <https://lyfe02.ushwor
ks.com/metadata/json/1> with linked account <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Created Partner Application <LyncEnterprise-dd9f8b8f52fd4b4fb5f928a0d4a02b9c>.
THE CONFIGURATION HAS SUCCEEDED.
****************** On Lync
****************** ERROR
Test-CsExStorageConnectivity -SipUri [email protected]
Test-CsExStorageConnectivity : ExCreateItem exchange operation failed,
code=574, reason=StoreContext{traceId=[2109175579],
activityId=[cf8138ff-9436-4f56-937e-26ab8c712ab2]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapCli
entMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)
at
System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult
asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndInv
oke(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndCre
ateItem(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Adaptor.ExStoreAdaptor.OnCreateItemComplet
e(IAsyncResult result)
at
Microsoft.Rtc.Internal.Storage.StoreAsyncResult`1.CallbackWrapper(IAsyncResult
result)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Internal.Storage.Api.StorageService.EndExecuteCommand(IAsyn
cResult asyncResult)
, exception=System.ServiceModel.FaultException:
StoreContext{traceId=[2109175579],
activityId=[cf8138ff-9436-4f56-937e-26ab8c712ab2]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapCli
entMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)
at
System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult
asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndInv
oke(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndCre
ateItem(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Adaptor.ExStoreAdaptor.OnCreateItemComplet
e(IAsyncResult result)
at
Microsoft.Rtc.Internal.Storage.StoreAsyncResult`1.CallbackWrapper(IAsyncResult
result)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Internal.Storage.Api.StorageService.EndExecuteCommand(IAsyn
cResult asyncResult)
Server stack trace:
at
System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime
operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action,
Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeEndService(IMethod
CallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at
Microsoft.Rtc.Internal.Storage.IStorageService.EndExecuteCommand(IAsyncResult
asyncResult)
at Microsoft.Rtc.Management.Lyss.Cmdlets.LyssCmdletCommon.ExecuteExCommand(S
toreOperation operation, String sipUri, BaseRequestType ewsRequest, Nullable`1
autoCreateParentFolder, IStorageService& client, Boolean reAuthorize), inner
exception=. Please check event log and trace for relevant information.
At line:1 char:1
+ Test-CsExStorageConnectivity -SipUri [email protected]
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Test-CsExStorageConnectiv
ity], FaultException
+ FullyQualifiedErrorId : ErrorExecuteExchangeCommandFailedWithFaultExcept
ion,Microsoft.Rtc.Management.Lyss.Cmdlets.TestExStorageConnectivityCmdlet
Test failed.
PS C:\Users\jmadsen>
JensI fixed the issue
It had to do with the Lync server still trying to access the old CAS server
For internal URLs on both CAS servers I am using the internal name, however the external url is https://webmail.domain.com
On both servers and internally that DNS record points to the old CAS server since we haven't cut over users yet
This was affecting the connection process some how Lync was using the external URL instead of the internal URL to connect to EWS
I was able to see with a packet sniffer that Lync frontend was trying to communicate with both the new CAS server and the old CAS server
When connecting to auto discovery it was connecting to the right CAS server, but after receiving the Autodiscover.xml it started connecting to webmail.ushworls.com (not EXCAS02)
I create an entry in the local HOST file on the Lync Front end server and pointed webmail.domain.com to the new CAS server
Issue Fixed – I can remove the entry from the host file after we make the DNS change internally and cut over users -
FIM Synchronization Service Event ID 6050 , 6126
FIM Synchronization Service
Event ID 6050 , 6126
Version : SharePoint 2010 Sp1+ CU12 14.0.6129.5000
i have saw daily in my logs regarding User profile Service and FIM Errror . Daily 1 AM scheduled time for User Profile Incremental Running.
And also.
MsiInstaller Error 1015, 1001,1004,1015,1001,
The management agent "MOSSAD-Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors : "0"
Warnings : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors : "0"
Warnings : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors : "0"
Warnings : "0"
User Action
View the management agent run history for details.
The management agent "MOSS-7ffc718e-5920-45ab-9cae-5c435e3769c0" completed run profile "MOSS_DELTAIMPORT_b23eb677-e1bd-4079-9feb-b769fd6ff90a" with a delta import or delta synchronization step type. The rules configuration has changed
since the last full import or full synchronization.
User Action
To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
Please suggest .
Deepesh Yevle - MCTS MCITPHi
Deepesh,
Please confirm that the Service Account you used to run the Forefront Identity Manager Synchronization Service(FIM Synchronization
Service) has the Active Directory Security Rights for “ Replicating Directory Changes”.
For more detailed information, see
http://themossblog.com/sharepoint-2010/sharepoint-2010-user-profile-synchronization-failing-event-id-6050
Best Regards.
Kelly Chen
TechNet Community Support -
How is called the Services "OpsMgr Health Service" in the SCOM 2012 and Client machine?
Hi,
Can anybody tell me how is called the Services of OpsMgr Health Service in the SCOM 2012?
I have installed the agent of scom2012 on my client computer. But I dont find any agent called "OpsMgr Health Service" on the Client machine?
RegardsHi
If you look in the services.msc window then it is listed as the System Center Management Service. This is the display name.
The actual service name is HealthService
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/
The Ayman answer is god, It is called "Microsoft Monitoring Agent" -
[svn:fx-trunk] 9328: Fixing SDK-22462: Event dispatched is not as expected in Tree
Revision: 9328
Author: [email protected]
Date: 2009-08-14 17:02:35 -0700 (Fri, 14 Aug 2009)
Log Message:
Fixing SDK-22462: Event dispatched is not as expected in Tree
For this, the issue is really that TreeItemRenderers assume that no click event can occur on the disclosureIcon. This is because the discolsureIcon is added and removed each time it goes through invalidation in commitProperties(), so a new discolsureIcon gets created and replaces the old one after they mouseDown (meaning no click event actually occurs). Automation replays some mouse events on one disclosureIcon only (which is an automation bug because that?\226?\128?\153s not how it actually works in the real world) and when a ?\226?\128?\156click?\226?\128?\157 occurs, that causes an itemClick on the Tree, when it shouldn?\226?\128?\153t. For Flex 3, this wasn?\226?\128?\153t a problem because the IR was getting invalidated through a different codepath because openDuration did not default to 0. If you set it to 0, you?\226?\128?\153d see the same problem in Flex 3. Anyways, the fix is just to block all click events that occur on the disclosureIcon.
QE notes: -
Doc notes: -
Bugs: SDK-22462
Reviewer: Alex
Tests run: checkintests, mustella Tree
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22462
http://bugs.adobe.com/jira/browse/SDK-22462
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/TreeItemRenderer .aserror dateField not selecion date 27/11/2002 ?
This is bug flex 3 ?
thanks -
Can't test sdk services exemple
Hi expert,
when i try to test sdk services from my ip communicator message host not found display.
i subscribe Ip phone to services,and i add services to my call manager.
but service is not visible from my ip communicator.
Please help.- Is the IPC on the same LAN as CCM or is there a firewall between IPC and CCM?
- What version of CallManager are you currently running including any service releases and/or engineering specials?
- What version of IP Communicator you are running. Is this the only IPC you have setup or are there other IPC that are having this problem. -
SDK service using domain user trying to set SPN for computer account
I have a SDK service running under a domain user account, but it tries to register the SPN for the computer account of the machine?!
Therefore I get the following alert:
The System Center Data Access service failed to register an SPN. A domain admin needs to add MSOMSdkSvc/WIN-9IAJC0HS9RJ and MSOMSdkSvc/WIN-9IAJC0HS9RJ.domainxx.local to the servicePrincipalName of CN=WIN-9IAJC0HS9RJ,CN=Computers,DC=domainxx,DC=local
Which makes sense because it has not the permissions to do that.
When I make the domain user account member of domain admins it has the concerning permissions and it indeed registers that SPN to the computer account. But why?? The SPN should be registered to the domain user account instead (and therefore I had given the
domain user account the read/write permissions to itself to do that).
I have the following SPN registered now for the computer and domain user account:
setspn -l WIN-9IAJC0HS9RJ
Registered ServicePrincipalNames for CN=WIN-9IAJC0HS9RJ,CN=Computers,DC=domainxx
DC=local:
MSOMSdkSvc/WIN-9IAJC0HS9RJ
MSOMSdkSvc/WIN-9IAJC0HS9RJ.domainxx.local
MSOMHSvc/WIN-9IAJC0HS9RJ
MSOMHSvc/WIN-9IAJC0HS9RJ.domainxx.local
TERMSRV/WIN-9IAJC0HS9RJ
TERMSRV/WIN-9IAJC0HS9RJ.domainxx.local
WSMAN/WIN-9IAJC0HS9RJ
WSMAN/WIN-9IAJC0HS9RJ.domainxx.local
RestrictedKrbHost/WIN-9IAJC0HS9RJ
HOST/WIN-9IAJC0HS9RJ
RestrictedKrbHost/WIN-9IAJC0HS9RJ.domainxx.local
HOST/WIN-9IAJC0HS9RJ.domainxx.local
setspn -l domainxx\omdas
Registered ServicePrincipalNames for CN=OMDAS,CN=Users,DC=domainxx,DC=local:
none for this account
I don't get it. Anyone?
I am using SCOM 2012 R2
Pls help.
Thanx in advance.
Regards
ChrisSCOM SDK service really tries to set its SPN to the computer account (although the SDK service is running using a domain user account). The alert is no bug!
I know this for sure because I gave the SDK service permission to do it - by making the domain user account member of the domain admins security group - and it indeed sets the SPN on the computer account.
The latter is the actual bug I would say! It should try to set the SPN for the domain user account the sdk service is running with.
Then again, nog having the SPN been set correctly to this domain user account, does not seem to bother SCOM at all indeed. Perhaps it uses NTLM instead in this scenario.
Can anyone comfirm? -
OpsMgr Connector 20066 event on Gateway server
Hi,
We have one of our Gateway servers in Grey state. When i had checked the eventviewer of the server could find lots of 20066 events and 21042 OpsMgr connector errors.
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 3/30/2014 4:17:40 AM
Event ID: 20066
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: XXXXXXXXXXXX
Description:
A Certificate for use with Mutual Authentication was specified, but that certificate could not be found. The ability for this Health Service to communicate will likely be impacted.
Log Name: Operations Manager
Source: OpsMgr Connector
Date: 3/30/2014 4:17:40 AM
Event ID: 21042
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: XXXXXXXXXXX
Description:
Operations Manager has discarded 4 items in management group 'MG Group Name', which came from YYYYYYYYY. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the
complete topology has not been distributed yet. The discarded items will be regenerated.
Unable to find any articles to troubleshoot the issue. Any suggestions?
JestyHi Saravanan,
Please see inline my response.
1. Was the GW server working properly before?
Yes the GW server was fine till yestrday and all agents were healthy.
2. Were valid certificates imported on GW and its corresponding MS
We have not imported any GW or MS certificates in the past few days.
3. Is there a communication issue between the GW and its MS?
Could you help me find out how to find out as i dont find any error in the eventviewer.
4. Do you see a value named 'ChannelCertificateSerialnumber' under "HKLM\Software\Microsoft\Microsoft Operations Manager\3.0\Machine Settings". The value you see there should be in exact reverse order of what you see as the Certificate Serial number
in MMC Certificates snap-in (Run- MMC- Add Snap In -- Certificates -- Computer Account. Expand the personal store and there should be a certificate that scom uses for the GW server.
I did see the
ChannelCertificateSerialnumber in the registry entry and the certificate that scom uses and they seems to be different.
i have 3 certificates in the personal store in which 2 are internal issuing CA ceritificates created using
computer authentication V2 and web auth template.
The other certificate is an invalid cerificate which has been expired exactly an year ago.
Jesty
Maybe you are looking for
-
Facing Problem with RFC Function Module
Hi, I have created an RFC function module to get some data in table format. I have run the RFC in original system: It is giving the data. However, when I run this in target system, It is not giving any values. Could you please let me know, why it hap
-
Hi guys, I am facing very strange problem , I have created sender agreement in ID but i am not able to see it in SXI_CACHE . I have done the DELTA and FULL cache refresh but nothing happened. Any idea how to remove this problem. Regards, Keith
-
Importing a list into a combo box.
I need to import several large lists into combo boxes in a form I am creating in AcrobatPro XI. I found the comboPopulateTest.pdf in another discussion; however, this only populates the items in the list. I need to import the Export Values associated
-
IPhoto 11 calendar not working correctly
I created a calendar for 2012 yesterday in iPhoto 11. When I opened it today to do some modifications, nothing shows up. iPhoto 11 also converted some older calendars I had saved from the past. They are no longer viewable either except within the
-
I continue to receive an App upgrade notice for an App that is not on my computer. After spending several hours with a variety of divisions (Lion,iTunes,iPad,iMac) of Apple Tech Support, none can give me any definitive explanation or solution. Prior