"Opt in"
Does anyone know how to "Opt in" for discounts that Verizon recently announced?
I did not believe it at first. So I very carefully called *611 and talk to a Verizon Customer Rep. She did not believe it either at first. But after I gave her the detail information of where from Verizon sent me the text message information, she double check it. And she told me that I was correct, and the deal was for real. In which case, I told her name down and the time/date of our chat. Then I had her to back date the free additional 2GB to the beginning of this billing cycle. Therefore, I am getting now 6GB of data allowance for the same price of what we were paying for 4GB each month.
Similar Messages
-
have been a Verizon customer since I got my first cell phone in my 30's - I am 50 now! A year ago, I stupidly opted to get a new phone on the EDGE program because I was trying my first Samsung device and was not sure I would like it having been an IPhone user for years.I was right! Or so I thought.... The Note 3 has been horrible. I am on my second phone(replaced it under warranty) and it still freezes, shuts off on its own, and will not come back on for long periods of time. Having had enough, I decided to EDGE Up to another device. On March 16th I tried to edge up my device online but was unable to. I immediately called to figure out what the problem was. Back in October I had a mix up in my billing where I had set up a payment. It was not done properly by customer service and as a result my line was cut off. I called the EXACT day it went off, filed a complaint about the lack of follow through for my arranged payment, and thought I had it straightened out as the payment was made that same day. That incident, although it was a Verizon error, caused my Edge Contract to be "hotlined". I spent an hour on the phone on March 16th clearing the whole mess up. When the conversation ended, the Verizon representative admitted it was a Verizon error, documented everything, and then told me she was filing a release for the hotline hold that would take a couple of days. Her name was Linda and I stupidly trusted what she said.
The days passed as I prepared to have a major foot surgery and to get my classroom straight before I would be out recovering for 3 weeks. All the time, my Samsung continued to glitch out like it has since I got it! While sitting on the couch recovering, I decided to deal with the phone issue again and EDGE UP. I figured 10 days latter, Linda would have taken care of the issue. Unfortunately, I faced the same problem and was told it was not eligible to edge up at this time. BACK on the phone again, 2 supervisors, 3 customer service reps. ( JOE from New York being the rudest customer service rep. I have EVER worked with) and 4 frustrating HOURS latter, Jason, the equally rude supervisor from Rochester, New York, informed me that Linda gave me BAD information, there was NOTHING he could do, and I am NOT eligible until April 14th!!!!! The WORST experience I have EVER had with a company. They were completely inept, rude, and not concerned about my time, my frustration, or the problems I was facing with their product in the LEAST. I have 4 LINES on Verizon that I am going to talk to Sprint about buying out. It was a horrible experience, and I can NOT believe I have no recourse or anyone to talk to....Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
" seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
Group Location
Network Advertising Initiative United States
Digital Advertising Alliance (DAA) United States
European Digital Advertising Alliance Europe
Digital Advertising Alliance of Canada Canada
....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
...I clicked PROTECT MY CHOICES and downloaded the app.
These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
This has been going on forever for me - I've been reporting this malfunction since 2013.
Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
We can no longer just "DELETE ALL COOKIES".
PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
In summary:
1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
Thanks so much!hello, palemoon's support forums are here: http://forum.palemoon.org/
-
Error in invoking target 'irman ioracle' of makefile '/opt/oragrid/rdbms/lib/ins_rdbms.mk'
Hello all,
I am attempting to install Oracle12c GI on two virtual nodes (in Fusion VMware) and am getting the following error message (Both nodes are configured exactly the same):
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO:
INFO: - Linking recovery manager (rman)
INFO: rm -f /opt/oragrid/rdbms/lib/rman
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/rman -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ /opt/oragrid/lib/s0main.o /opt/oragrid/rdbms/lib/sskrmed.o /opt/oragrid/rdbms/lib/skrmpt.o -ldbtools12 -lclient12 -lsql12 -lpls12 -lrt -lplp12 -lsnls12 -lunls12 -lnls12 -lslax12 -lpls12 -lrt -lplp12 /opt/oragrid/lib/libplc12.a -lclntsh -lclntshcore `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat
INFO: /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnz12 -lzt12 -lztkg12 -lztkg12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsn
INFO: ls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: test ! -f /opt/oragrid/bin/rman ||\
mv -f /opt/oragrid/bin/rman /opt/oragrid/bin/rmanO
INFO: mv /opt/oragrid/rdbms/lib/rman /opt/oragrid/bin/rman
INFO: chmod 751 /opt/oragrid/bin/rman
INFO: chmod 755 /opt/oragrid/bin
INFO:
INFO: - Linking Oracle
INFO: rm -f /opt/oragrid/rdbms/lib/oracle
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/oracle -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ -Wl,-E /opt/oragrid/rdbms/lib/opimai.o /opt/oragrid/rdbms/lib/ssoraed.o /opt/oragrid/rdbms/lib/ttcsoi.o -Wl,--whole-archive -lperfsrv12 -Wl,--no-whole-archive /opt/oragrid/lib/nautab.o /opt/oragrid/lib/naeet.o /opt/oragrid/lib/naect.o /opt/oragrid/lib/naedhs.o /opt/oragrid/rdbms/lib/config.o -lserver12 -lodm12 -lcell12 -lnnet12 -lskgx
INFO: p12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 -lknlopt `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap12" ; fi` -lskjcx12 -lslax12 -lpls12 -lrt -lplp12 -lserver12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 `if [ -f /opt/oragrid/lib/libavserver12.a ] ; then echo "-lavserver12" ; else echo "-lavstub12"; fi` `if [ -f
INFO: /opt/oragrid/lib/libavclient12.a ] ; then echo "-lavclient12" ; fi` -lknlopt -lslax12 -lpls12 -lrt -lplp12 -ljavavm12 -lserver12 -lwwg `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lztkg12 `cat /opt/oragrid/lib/ldflags` -lncrypt12
INFO: -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo12"; fi` -L/opt/oragrid/ctx/lib/ -lctxc12 -lctx12 -lzx12 -lgx12 -lctx12 -lzx12 -lgx12 -lordimt12 -lclsra12 -ldbc
INFO: fg12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -locr12 -locrb12 -locrutl12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -lgeneric12 -loraz -llzopro -lorabz2 -lipp_z -lipp_bz2 -lippdcemerged -lippsemerged -lippdcmerged -lippsmerged -lippcore -lippcpemerged -lippcpmerged -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lsnls12 -lunls12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12
INFO: -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lasmclnt12 -lcommon12 -lcore12 -laio -lons `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: /
INFO: usr
INFO: /
INFO: bin
INFO: /
INFO: ld
INFO: :
INFO:
INFO: cannot
INFO:
INFO: find
INFO:
INFO: -
INFO: ljavavm12
INFO:
INFO: collect2:
INFO: ld returned 1 exit status
INFO:
INFO: make: *** [/opt/oragrid/rdbms/lib/oracle] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'irman ioracle' of makefile '/opt/oragrid/rdbms/lib/ins_rdbms.mk'. See '/opt/oraInventory/logs/installActions2013-11-25_04-25-06PM.log' for details.
Exception Severity: 1
Below are my VM specs:
**************************************************************Installed RPM's*****************************************************************
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.4 (Santiago)
rpm -qa gcc
gcc-4.4.7-3.el6.x86_64
rpm -qa make
make-3.81-20.el6.x86_64
rpm -qa|grep oracle
oracleasmlib-2.0.4-1.el6.x86_64
oracle-logos-60.0.14-1.0.1.el6.noarch
oracle-rdbms-server-12cR1-preinstall-1.0-8.el6.x86_64
kmod-oracleasm-2.0.6.rh1-2.el6.x86_64
oraclelinux-release-notes-6Server-9.x86_64
oraclelinux-release-6Server-4.0.4.x86_64
oracleasm-support-2.1.8-1.el6.x86_64
***************************************************************JAVA***************************************************************************
java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
*************************************************************SYSCTL**************************************************************************
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.core_pattern=/var/adm/crash/cores/%e.sig%s
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
# Controls the default maxmimum size of a mesage queue
kernel.msgmnb = 65536
# Controls the maximum size of a message, in bytes
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
# oracle-rdbms-server-12cR1-preinstall setting for fs.file-max is 6815744
fs.file-max = 6815744
# oracle-rdbms-server-12cR1-preinstall setting for kernel.sem is '250 32000 100 128'
kernel.sem = 250 32000 100 128
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmni is 4096
kernel.shmmni = 4096
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmall is 1073741824 on x86_64
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmax is 4398046511104 on x86_64
kernel.shmmax = 4398046511104
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_default is 262144
net.core.rmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_max is 4194304
net.core.rmem_max = 4194304
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_default is 262144
net.core.wmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_max is 1048576
net.core.wmem_max = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for fs.aio-max-nr is 1048576
fs.aio-max-nr = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for net.ipv4.ip_local_port_range is 9000 65500
net.ipv4.ip_local_port_range = 9000 65500
# The below entries were added and deal with an r_filtering issue oracle wants private interconnects set loose
net.ipv4.conf.eth4.rp_filter = 2
net.ipv4.conf.eth6.rp_filter = 2
net.ipv4.conf.eth1.rp_filter = 1
*************************************************************Filesystem************************************************************************
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_oracle12c-lv_root
8.9G 3.5G 5.0G 42% /
tmpfs 2.2G 0 2.2G 0% /dev/shm
/dev/sda1 485M 101M 359M 22% /boot
/dev/mapper/vg_oracle12c-lv_home
2.0G 70M 1.9G 4% /home
/dev/mapper/vg_oracle12c-lv_tmp
4.5G 541M 3.7G 13% /tmp
/dev/mapper/vg_oracle12c-lv_var
5.0G 956M 3.8G 20% /var
/dev/mapper/oracle_vg-oragrid
20G 5.0G 14G 27% /opt/oragrid
.host:/ 466G 137G 330G 30% /mnt/hgfs
*******************************************************************CPU INFO*******************************************************************************
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
*******************************************************************************Memory************************************************************************
free -m
total used free shared buffers cached
Mem: 4331 3972 359 0 30 3412
-/+ buffers/cache: 530 3801
Swap: 14323 0 14323
****************************************************************************Network***************************************************************************
Note eth0 is NAT and used for internet connectivity, eth1 is the public network (static and accessible to the hypervising machine running fusion ), eth4 and and eth6 are private, and eth3 is connected to an openfiler storage appliance (This is also a VM serving out ISCSI targets).
eth0 Link encap:Ethernet HWaddr 00:50:56:22:C6:91
inet addr:192.168.90.140 Bcast:192.168.90.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:c691/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:225 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24414 (23.8 KiB) TX bytes:18545 (18.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:50:56:3A:AE:95
inet addr:192.168.3.2 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3a:ae95/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:482561 errors:0 dropped:0 overruns:0 frame:0
TX packets:450616 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:483728272 (461.3 MiB) TX bytes:501489666 (478.2 MiB)
eth3 Link encap:Ethernet HWaddr 00:50:56:24:40:AB
inet addr:192.168.5.2 Bcast:192.168.5.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe24:40ab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4944 errors:0 dropped:0 overruns:0 frame:0
TX packets:3817 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6186232 (5.8 MiB) TX bytes:346478 (338.3 KiB)
eth4 Link encap:Ethernet HWaddr 00:50:56:3F:77:AA
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3f:77aa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1222 errors:0 dropped:0 overruns:0 frame:0
TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:205198 (200.3 KiB) TX bytes:168464 (164.5 KiB)
eth6 Link encap:Ethernet HWaddr 00:50:56:22:72:E3
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:72e3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:54390 (53.1 KiB) TX bytes:17992 (17.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:194338 errors:0 dropped:0 overruns:0 frame:0
TX packets:194338 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:920534042 (877.8 MiB) TX bytes:920534042 (877.8 MiB)
*****************************************************************************ORACLE ASM AND MULTIPATH INFO********************************************
/etc/init.d/oracleasm listdisks
VOTE1
VOTE2
VOTE3
vote3 (14f504e46494c45523434517a65422d4b6364682d57544f65) dm-8 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:2 sdh 8:112 active ready running
vote2 (14f504e46494c45526e6c6a48324a2d6a4347462d7a465074) dm-6 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:1 sdg 8:96 active ready running
vote1 (14f504e46494c45525763646753422d594262512d414a6275) dm-7 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:0 sdf 8:80 active ready running
If any more information is necessary please request and I will provide, as you can see there is more than enough memory and disk space for the installation. The only exception being that I am using a different 'oraInventory', 'gridhome', and 'oraBase'. I have looked closely at the output and the problem seems to be a file called 'ljavavm12', I have highlighted the line in bold above in the log output. Any help with this would be greatly appreciated.
Regards,
AlexResolved my own issue,
for anyone else having the same problem, here is how it was resolved:
ljavavm12 is part of libjavavm12.a, for some reason this file was not copied into the $GRID_HOME, after doing so make went through fine.
'cp /opt/oragrid/javavm/jdk/jdk7/lib/libjavavm12.a /opt/oragrid/lib/'
Alex, -
I tried to move my images (over 25,000) to an External Hard drive to open up some memory, hoping to make my computer run faster. It took three hours to move the images and I see them all in the mac's menus. However when I try to open them with iPhoto now, none appeared. and when I tried to import them back to the main HD they come in to iPhoto just fine, but not with the albums nor any of the massive organization i'd created in the original. this represents years of images, and I can't imagine that I'd have to recopy them into folders/albums again.
Terrance Devlin answered a similar question back in April of last year. He said to make sure the ExHD is formatted to MAC OS Extended (Journaled) and to move the library to the ExHD and then open iPhoto with the option button and select "Choose Library" from the resulting menu.
Command "I" tells me that the new drive is formatted correctly. I can't locate the "Choose Library" when I open iPhoto with the opt button.
First, I wondered if the application needs to be on the same drive as the Library. I sure would like to know if I can find out how to restore all the folders I had them in. Terrance's advice helped the user that had asked the question.
Here's the url for that archived discussion: https://discussions.apple.com/thread/3849933?start=0&tstart=0
Can anyone help? I'm using iPhoto 5. My MAC is an OS X version 10.4.11.
thanks, brokenlomHere are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/ -
[Solved] Organize the /etc/ /opt/ and /home w/o breaking anything?
+ What are the common organizing tactics that you use?
For example, if you're going to install anything, where do you put it, how do you do it with out breaking anything, etc.
My /etc/ /opt/ and /home folders are getting out of hand.
For my home folder, I have:
Desktop, Downloads, Dropbox (the only ones that I want here), meteor, node, nvm, nplay, pkg, python2-psutil, python26, src, sublime-text-2, try-meteor, packer (file), pacman.conf (file), and dead.letter (file).
How do I move these without breaking anything?
For my /etc/ I have:
adjtime (file), adobe, anacrontab (file), arch-release (file), asound.conf (file), at-spi2, avahi, bash.bash_logout (file), bash.bashrc (file), bash_completion.d, binfmt.d, bluetooth, ca-certificates, ca-certificates.conf (file), chromium, colord.conf (file), conf.d, couchdb, cron.d, cron.daily, cron.deny (file), cron.hourly, cron.monthly, cron.weekly, crypttab (file), cups, dbus-1, dconf, default, depmod.d, dhcpcd.conf (file), drirc (file), enviroment f(ile), fonts, fstab (file), fuse.conf (file), gai.conf (file), gconf, gdm, geoip, group (file), group- (file), grub.d, grub-cutomizer, gshadow (file), gshadow- (file), gssapi_mech.conf (file), gtk-2.0, gtk-3.0, host.conf (file), hostname (file), hosts (file), ifplugd, iftab (file), ImageMagick-6, inputrc (file), iproute2, iptables, issue (file), java-70openjdk, kernel, krb5.conf (file), ld.so.cache (file), ld.so.conf (file), ld.so.conf.d, libnl, libreoffice, locale.conf (file), locale.gen (file), localtime (file), localtime (file), login.defs (file), logrotate.conf (file), logrotate.d, lvm, lxdm, machine-id (file), mail.rc (file), makepkg.conf (file), man_db.conf (file), mdadm.conf (file), mercurial, mine.types (file), mke2fs.conf (file), mkinitcpio.conf (file), mkinitcpio.d, modprobe.d, modprobe.dconf (file), modules-load.d, motd (file), mtab (file), nanorc (file), netconfig (file), network.d, NetworkManager, ncsd.conf (file), nsswitch.conf (file), obex-data-server, odbc.ini (file), ODBCDataSources, odbcinst.ini (file), openldap, os-release (file), pacman.conf (file), pacman.d, pam.d, pango, passwd (file), passwd.OLD (file), passwd- (file), pcmcia, pkcs11, pkgtools, pm, polkit-1, ppp, profile (file), profile.d, protocols (file), pulse, rc.d, rc_keymaps, rc_maps.cfg (file), redis.conf (file), request-key.conf (file), request-key.d, reolv.conf (file), rpc (file), salt, securetty (file), security, services (file), shadow (file), shadow- (file), shells (file), skel, speech-dispactcher, ssl, sudoers (file), sudoers.d, sysctl.conf (file), sysctl.d, systemd, tmpfiles.d, tor, totem, udev, udisks2, updatedb.conf (file), UPower, vdpau_wrapper.cfg (file), wgetrc (file), wpa_supplicant, X11, xdg, xinetd.d, xml, and zsh.
How do I learn what can be deleted here and how do I move things without breaking anything in /etc/? Is there a program that highlights what's important, what can be moved, etc.?
For my /opt/ I have:
android-sdk, dropbox, and tor-browser-en.
This doesn't bother me, but I can see that somewhere in the future where it can get cluttered.
I also have created a folder on my root called ptmp and am using it to store my packertmp-0 files since my tmp folder gave me an error. I want to do things right and not get that cluttered too. So if you know about this check the thread out here
As a new Arch Linux user, coming from Windows 8, everything is great except a few minor annoyances. I give it an 7.8/10 for bring stable.
I will open up new threads for the following, but here are the few minor annoyances I still have:
If I edit what show up on my main menu (with main menu, not menu editor [from gnome]), somehow things get re-highlighted as if I clicked restore to defaults-- so I can't edit what I don't want to show up in my main menu anymore.
I forgot what file I edited that I made Chromium run at startup and now it slows things down by running at startup.
I couldn't exchange nautilus for dolphin (I like dophin better), and couldn't get xmonad going although I got the dependancies installed (Haskell, etc.). It throws me this error:
Please check the file for errors.
/home/jayvan/.xmonad/xmonad-x86_64-linux: executeFile: does not exist (No such file or directory)
xmonad:
xmessage: executeFile: does not exist (No such file or directory)
X Error of failed request: BadAccess (attempt to access private resource denied)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Serial number of failed request: 7
Current serial number in output stream: 8
I can't remove the Universal access applet. I don't need it. This should be removable.
There is no longer a high performance, low performance, balanced option for battery consumption. This should make a comeback.
I somehow edited my information of my user and it's not editable through system settigns. It shows my company, phone number, etc. I manually entered a command that I forgot in the terminal that did this. I'm not sure. This should be easily editable in Gnome 3. I don't know why it isn't.
I've created a news user and don't know how to delete it.
I couldn't get mp3tag to work with packer because it didn't have a PKGFILE. Will be trying to manually make it some time later, but it should be fixed in the AUR.
I would like to uninstall the Epiphany Browser. Desktop Search, Power Statistics but don't know how. I know it's -Rns.
Sublime Text 2 doesn't show up as a desktop item in the applications folder, I have to go to the folder and click sublime_text to launch it.
When I change YouTube to anything higher than 240p, it doesn't play and I have to refresh it.
Grub-sustomizer should come installed with Gnome, especially for those that want to dual boot Android OS (x86) or anyhting else. In fact, in the installation guide there should be a warning that if you plan to install another OS like Android OS (x86) you should partition an extra 16 GB as ext3, or if you want to install another Linux distro to partition an extra 20GB as ext4.
There isn't any multitouch gestures pre-installed that I can configure. I'll see if they even exist.
I haven't check but I'm not sure if there is a good screen capturing app.
Last, so I can switch all my friends to Arch, they've already taken an interest an I plan to do a blog post about it once I feel confident, how can I customize this scrip to install the apps I already have installed?
I'll get to posting these in seperate threads right now.
Last edited by jjshinobi (2013-04-09 19:57:23)Ohhh man, you're making me nervous! Are you copying your files around your operating system yourself?
jjshinobi wrote:What are the common organizing tactics that you use?
The answer to your question is, I don't organize anything. Instead, pacman keeps track of all the files.
The only files you should need to worry about are what's in "/home". You can organize that however you want. If you have many ebooks, create a directory called "Books". Whatever.
Your story kind of reminds me of my roommate in college. As soon as he finished installing Windows XP, he would go through the entire directory structure and delete anything that was "unnecessary". It kind of scared me.
But fortunately, we don't have to do that with Arch Linux. Pacman takes care of everything, and it's super easy to create your own package. -
My Safari shortcut Cmd+Opt+B doesn't work. Please Help.
Hi fellow MacBook Pro Users,
My Safari shortcut Cmd+Opt+B, to show and hide all bookmarks doesn't work. The same shortcut is used in a third party app Scrivener and it doesn't work there too. I had a look at all my keyboard shortcuts listed in System Preferences>Keyboard>Keyboard Shortcuts and don't see the shortcut listed there. Also I checked my triggers in Quicksilver and didn't see the Cmd+Opt+B shortcut there too. Any idea how I can fix this? Had this issue for a long while now.
Thanks!This issue may be resolved by installing the 10.6.8 v1.1 combo updater.
Mac OS X 10.6.8 Update Combo v1.1 -
Please, need help. I'm using iA Writer. I opted to store doc's on iCloud and now I find I'm not able to access iCloud in order to retrieve said doc's. A solution to this dilemma would be greatly appreciated.
Thank you,
SatyaiA Writer on iDevice:
Look at the Storage List, there should be an iCloud entry (along with iPad/iPod/iPhone, and Dropbox). Choose iCloud to get a list of documents.
To write a new file: Be sure to have iCloud chosen in Storage. Create new doc, write and click on the Storage list. File is written to iCloud.
iA Wrtier on Mac:
Write file and save locally, then choose: File>iCloud>Move to iCloud.
To read a file: File>iCloud>[choose file name]
I should add that files read by iA Writer must be files created by iA Writer, either on same device/computer or another.
-- OR --
I may have misunderstood your post. If my ipad is not connected to the internet, I can still open a file I had saved on iCloud (only this is the "local" copy of it). When I'm done, it's saved locally but when I turn on wifi and access the file again and then press the Storage List icon, the file is saved to iCloud. Are you saying that you can't open a local copy when not connected to wifi? -
Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan -
You have an opt out option.
THIS opt out option has a forever option.
IT DOES NOT WORK.
I have opted out forever on the stupid )(&**%^*&()*^ tab that occurs in the MIDDLE OF MY SCREEN, covering a THIRD of my screen (and at 62cm - this is over kill!) .... FAIL. (at least 4 times)
I have opte dout forever on the stupid tab on the RIGHT side of my screen......FAIL.(at least 8 times)
I am unable to opt out forever on the tab that appears on the bottom of my screen, as the opt out options appears BEHIND the window I wish to opt out forever of. (I call this EPIC fail.)
When I am reading a story on line, I DO NOT WANT TO SHOP. If I am shopping in Amazon for a book, I will be reading about that book. IT IS ANNOYING TO HAVE TO CLOSE OUT WINDOWS EVERY TIME I SEARCH FOR A NEW BOOK - consider that I search/buy around 15 books at a time - after checking out maybe 50 that these tabs open over the TOP of.
I also wish to get rid of the underlines with the green circle-thingy arrows that open pop up windows if I mouse over them. (there are 3 of them under this box I am typing in as I type, and nudging the mouse out of the way has opened up at least 4 stupid pop up windows - which I have blocked pop ups in the options...so WHY???????)
I realise this can not be fixed on the spot, as it is going to require an actual programmer to fix it but please, pass this up to or over to whoever CAN fix it. I have used firefox since before patch 4 after it went live. I ADORED the old "you are F****d (etc" page you used to have that was directly opposed to internet explorers page not found - and I actually took the time to read it and had a terrible time stopping the laughter (at work of all places) when I did. I do not want to change browser, but these *features* do not enthrall me - especially since *features* should be optional, and turning them off should work.
Thank you for your help, and I hope you have a great day/night and no more horribly painful people like me. <3 x othankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU -
How to embed email opt-in form in image
How to embed email opt-in form in image
You cannot delete the email field. It is required for the form to work. One thing you can do that is a bit more work is to use Adobe Forms. I believe it is at Quickly & Easily Create Online Forms and Surveys | Adobe FormsCentral and create the form you want there and then you can copy the embed code from it and use the insert HTML to embed the form in your page.
-
Error while displying the data of Write-opt DSO
Hai SAP BI Gurus,
I have created Write-opt DSO with settings
"Do Not Check Uniqueness of Data" CHECKED
and data also loaded. Further If i try to "Display data" giving me the below dump.
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "GP08EBRNJU17FO7EUSU63XGV20Y" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 26).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Any body can help me ... out if u face the same scenario..!
Thanks in Advance 2 Gurus...
VijayHERE IS THE DUMP
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 06.05.2011 09:32:55
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "GP08EBRNJU17FO7EUSU63XGV20Y" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 26).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"GP08EBRNJU17FO7EUSU63XGV20Y" or " "
"INITIALIZATION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "sapdw1i2"
Network address...... "10.51.11.41"
Operating system..... "Linux"
Release.............. "2.6.16.60-0.58.1-smp"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "chrbl170"
Database type..... "ORACLE"
Database name..... "DW1"
Database user ID.. "SAPSR3"
Terminal.......... "INA50001"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Oct 31 2010 21:31:41"
create on........ "Linux GNU SLES-9 x86_64 cc4.1.2"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 117
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 701
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 29328936
Heap.... 0
Page.... 114688
MM Used. 1220192
MM Free. 2967056
User and Transaction
Client.............. 500
User................ "S33Z5X"
Language key........ "E"
Transaction......... "RSA1 "
Transactions ID..... "4DB9F0087F7A43ADE10000007F000002"
Program............. "GP08EBRNJU17FO7EUSU63XGV20Y"
Screen.............. "GP08EBRNJU17FO7EUSU63XGV20Y 1000"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "GP08EBRNJU17FO7EUSU63XGV20Y" - in
"INITIALIZATION".
The main program was "GP08EBRNJU17FO7EUSU63XGV20Y ".
In the source code you have the termination point in line 0
of the (Include) program " ". -
Special Keys(Ctrl-opt-esc) in Screen Share no longer working after latest update
I typically remote into a machine back home through icloud once or twice a week to help my wife kill a program that can get stuck. I used to be able to send command+opt+esc to get to the remote computers force quit applications window. But now when I do that after the latest update, it only does it on my computer and no longer send the command to the remote screen share session.
Anyone else experience this or have a fix?
-Dan(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen. -
How to deal with the using up space of /opt/oracle
Hello, all
We have an Oracle 10g preinstalled in a linux server (Rh 9). Now the system reports that the /opt/oracle is using up. The alert says:
Filesystem /opt/oracle has only 19% available space
Because I didn't install the Oracle dababase, I didn't have the chance to select a place for filesystem. Now the /opt/oracle is on the /dev/sda6 which is only 7.1G. I want to know what kind of information are stored here? Should it keep growing? Our database running on the Oracle is a small one, and it shouldn't occupy so much space. By the way, I scheduled the backup to disk (another hard disk) everyday. Is there any copy of the backup on /opt/oracle? How can I deal with it?
Any advice is highly appreciated!
Qian
Message was edited by:
QianChen
Message was edited by:
QianChenTypically, the growth files on your binary directory is going to be in the $ORACLE_HOME/network/logs/listener.log , any tracelog, sqlnet.log, or any files that get accidentally dumped in $ORACLE_HOME/dbs.
I would check there first.
Also, try scanning for the last few files written/updated in the past 30 days.
#30 biggest files modified in last little while:
find . -xdev -type f -mtime -14 -exec ls -l {} \; | sort -nk 5,5 | tail -30 -
How do I opt-out of recieving email receipts for free items from the store?
Hello,
Currently, when I download free apps from the store I will eventually receive weekly receipts from e-mail. While useful on purchased items, I treat this as spam for free items.
How do I opt-out of this for free items?I'm not aware of any setting to prevent the Apple's receipt to be sent.
If you bought a mix of purchase item and free item, the will appears on the same receipt. Instead of considering them as spam, you can consider them as "a way to recall which apps you dowloaded in case something wrong happen".
Personally, I have created a folder called "receipts" and simply send these mails to this folder. -
Error in invoking target install of make file /opt/oracle/product/9.0.1/ctx/lib/ins_c
I am trying to install Oracle 9i database release 2 on Linux RedHat 7.3. I got error message from OUI during the linking Oracle database
error in invoking target install of make file /opt/oracle/product/9.0.1/ctx/lib/ins_ctx.mk
Any input is greatly appreciated.Pl identify exact version of "10g" you are trying to install. Are you following all of the steps in the Install Guide ? Pl post the last 50 lines from the install log file
HTH
Srini
Maybe you are looking for
-
I currently use a code heavy solution thats clunky and need to refine the graphing part. For simplicity I want to use the waveform chart and its "Stack Plots" option. However I cannot see how to collect 2 or 3 data streams and display them on 1 of th
-
How can I import videos onto my iMac iMovie from my iPad (without emailing it)? I Have iMovie '09 and an iPad 2.
-
Hi experts, We are procuring some material without PO. GR without PO done with Mvt type 501 and also entered Vendor Code in it. But how to make payment to this vendor with reference to GR (which is done with Mvt type 501)? Regards, Jay
-
How to reverse billing documents in CRM 2007 utilities billing
Hello All, How to reverse the billing document in CRM 2007 utilities in billing screen. In ISU CRM SAP gui we use Tcode EABICO to reverse the document by giving reversal reason and reconcil key. how can we reverse a bill in CRM 2007 Thanks & Regards,
-
Why can't i restore my ipad!?!?!?!
ok, hey guys heres my problem, i have been able to update my ipad before and what not but for some reason now, it will not restore or update at all. i even try to restore manually and nothing help. if i try o restore normally i get "There was a