OPTIARC-AD7560A-D803.exe firmware and CRC/installation issues for DvD RW drive

Does anyone happen to know if the "OPTIARC-AD7560A-D803.exe" file is still available? If so, where?
The file seems necessary to correct issues with my DVD RW drive, which experiences unfounded CRC errors when I try to install certain software from CD.
The download link for this file was very easy to find on Lenovo's support website, but unfortunately the link produces what seems to be a 404 error or notice of discontinuation provided in cantonese.
I know I need this file- if it is no longer supported by Lenovo, is there any place where I can download either that file or some equivalent new firmware to end the CRC errors?
Thanks!
[email protected]
Solved!
Go to Solution.

Next day - Nevermind, for whatever reason I no longer get the odd message and was able to download the file easily. Thanks!

Similar Messages

10.5.0 DVD and 8800GT installation issues/Retail dvds up to 10.5.4 yet?

I know this is a known issue if you upgrade you graphics card to the 8800GT retail 10.5.0 dvd will lockup your system. my question is when is Apple going to update the retail DVD to something useful like 10.5.4. I have already contacted apple and they where helpful and they sent me a replacement 10.5 dvd but it was still the base version of 10.5.0. I just want to be able to reinstall my os without having to reinstall my old 1900xt card. I just wish we could slipstream a dvd like windows xp and vista.

Hiya,
I AM running the 8800 and have had no issues at all (luck?). Saying that, the first thing, I have done after install, used the comboupdate to 10.5.4.
Can you not get as far as software update? Can you use an old graphics card and install Leopard, run software update, THEN put in your 8800? Only a thought.
Hope you can sort it. (There IS a graphics update out: http://www.apple.com/support/downloads/leopardgraphicsupdate10.html , though, but you need at least 10.5.2.)
Message was edited by: Alexandre

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

A lot of people have a Mac where the superdrive has been taken out to be replaced with a harddisk. Try to find a friend who has done that, give him a beer and take the superdrive, then buy a superdrive container from OWC or another for afew dollars and put it in there. This slimdrive container has a USB connector. There you go.

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

CS6 Web and Design Installation issues

I'm having installation issues with cs6 web and design. Purchased two downloads of the software for mac, but after attempting to download all day, now it's saying I can't open the download because it isn't recognized by my computer. Been at this all day, so frustrated. Any help?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

Firmware And Application Software Upgrades For Select Cinema EOS System Cameras

In response to strong demand from professionals working in the fields of motion picture, commercial and television production, the firmware and application software upgrades will offer enhanced color management efficiency and camera functionality, contributing to improved video production workflow efficiency.
To learn more: click here

Hi,
Did you downloaded the Firmware Update from HP ePrint Center or throught the product download page?
If you downloaded it from ePrint Center, try using the tool below:
http://ftp.hp.com/pub/softlib/software12/COL34598/kj-88868-4/CM1410_MFP_Series_FW_Update-20111215.dm...
If you still have any issue, and the device connected through the network, try to temporary connect the device with USB, reeboot your Mac and try launching the tool once again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Installation issues for BI 10.1.3 on Windows

Hello,
I wanted some help in installing Oracle BI 10.1.3 on the windows platform (XE). I just went through the complete process and the installation was successful. Now when I try to start OC4J I get the following error:
Error: Cannot find file c:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar
I have JDK 1.5.0-11 installed.
Any help is appreciated.
Thanks
Praveen

Hi Praveen
Do you have a fully quaified domain name (FQDN) defined for the server and also defined in the HOSTS file? If you don't have this set up, and the Oracle documentation is mot very clear about the need for this, then your server will not be able to connect properly.
Unfortunately, if you don't have this set up at this stage you will need to de-install the Oracle software, fix the FQDN, and then re-install. Making alterations to the FQDN after the event never works.
Best wishes
Michael

Installation Issues for Management Agent on AIX

I am having installation issues with Oracle Management Agent Install using OUI....
I have done the following:
i)     download AIX_Grid_Control_agent_download_10_2_0_1.zip to aix machine.
ii)     unzip , it creates aix directory.
iii)     unzip "oui_aix.jar " , which is available under aix/oui/
iv)     pl unjar "oui_aix.jar " , ( jar -xvf oui_aix.jar )
v)     set AGENT_HOME=/oracle/WD1/oem/
vi)     chmod –R 777 * from /oracle/WD1/oem/
vii)     invoke ./runInstaller from aix/oui/Disk1/
When I invoke runInstaller it asks me for Additional Management Service install but after first screen does check ask Oracle Home and then goes intsall OUI and never asks for OMS and OMS port etc..
Can I install the Management agent through OUI... What are the steps ?
Thanks,
Atul

I deinstalled the OUI and again re-installed.. but still I cannot get it working.. That is why I was looking that if somebody came accross the same issue... Why it does not ask the OMS page at all.. If some body has installed Management Agent on AIX through OUI pl. respond.
Thanks
Atul

New firmware 21.0.025 issue for Nokia 5800

I have upgraded my firmware to software version v21.0.025 . For 2 days there was no problem but on 3rd day i cannot see 4 shortcuts on homescreen even the phone settings are correct. If i set homescreen shortcuts as Contact bar..its working perfectly but when i switch to shortcuts bar it is not working even my dailing & contact button on home screen is not working. When i am pressing Green button on phone with no results.
Kindly suggest ASAP what needs to be done.

I'm having the opposite problem. The shortcuts comes up on the home screen, but the Contact Bar doesn't work. After installing the lastest firmware (and even reinstalling it, to try again), the number pad would no longer come up. If we pushed the number pad icon, nothing happened, just the vibration. I thought the phone was broke! Aside from the number pad not being accessible, the Contacts bar no longer had the add contacts button and the one and only contact that was added (with photo) was no longer there. It just became 4 blank squares, without the ability to add anything do them. (it's still like that, if we select Contacts Bar for the home screen) My wife, through the settings menu, figured out how to get the keypad to work, but the Contacts Bar no longer functions. However, the shortcuts bar does work. I tried the *#7780# thing, and after having the settings be reset and the phone restart, it went back to no accessible number pad! I don't know why it's doing this, but it's a bit of a bummer to have a 1-day-old phone that's not fuctioning properly. Anyway, the phone is working, but it would be nice to have the "factory settings" be a state where you can actually dial a number, and it would also be nice to have a working contact bar. Any ideas, folks?
Perhaps, if there is another firmware update, in the future, the problem will somehow be fixed.

Satellite P300D-13N and XP Installation Issues (Sata-Driver)

Hi,
I have some issues with my XP-Downgrade.
I already tried integrating the Intel Storage Manager drivers into my XP-CD but unfortunately it didn't work.
Probably because i've been integrating ALL drivers, that were available and not just the one that should work for my chipset.
Anyway, in one of the threads in this forum there is a link to [THIS How To|http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...
[Here|http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my device manager (sorry for it being in german) of the pre-installed Vista.
As you can see, there is no information about the controller-Version.
So my question is, WHAT chipset is built into my laptop, because due to the fact that the Intel drivers do not work AND there is no information about any Intel Drive-Controller, I have no idea, which drivers i have to integrate into the XP-CD to get my XP-Installation to work. :(
Help :(
Thank you
Laptop: Satellite P300D-13N PSPDCE

Of course... I didn't want to bore you with the details... but I can do that ;)
I couldn't find any Chipset drivers on amd.com OR the toshiba website so I googled for the chipset and found [This Driver|http://eu.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=883&CategoryID=1&Deta ilName=Driver&MenuID=123&LanID=4] on the ECS-Elitegroup website.
I don't know why AMD doesn't upload this driver on their website, because I don't think I am the only one, who needed this SATA-Driver... ;)
Anyway, with the chipset-driver on my HDD, I created an XP-BootCD. I didn't know which driver (there are 3 or so in the package you can download on the ECS-Website), so I put *all* of them in the CD, which worked just fine. I think the *ahcix86.inf* in *\1_chipset_XP3264\XP3264\RAID7xx\x86\ i* is the important file for WinXP to load, but I'm not sure...
PS: The original catalyst drivers from ati.com do NOT work but the ones you can find [here|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] work fine ;) Just telling you so you don't try 3 different versions from ati.com before you try the toshiba-drivers... like i did :D

CS 5.5 installation issues for photoshop and indesign

I have recently had my computer rebooted with a new hard drive and windows 7. therefore ive needed to re-install 5.5 creative suite. Warnings and errors have been displayed identifying that photoshop and indeisgn can be installed. i have copied the error codes (below) could anyone help me resolve this?
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 2 fatal error(s), 22 error(s), 19 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {DE9919D2-02F6-1016-B9D5-B7E70E2BA75F} Adobe InDesign CS5.5 Application Base Files2 7.5.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Adobe CS5_5\payloads\AdobeInDesign7xAppBase2-mul\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{DE9919D2-02F6-1016-B9D5-B7E70E2BA75F}'. Error: Error 21 The device is not ready.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {6C7D437A-D2E9-4FE9-A4D9-A6329860835C} Adobe Linguistics CS5 5.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {CE75F5DB-8CA3-4E84-A30E-AF9160006105} Adobe Player for Embedding x64 3.1 3.101.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {B55FDCCB-8A45-4943-8D90-585C3490A032} Adobe WinSoft Linguistics Plugin CS5 x64 1.2.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {9A8B01C5-78D1-465F-B5F6-BD59B7800EC7} AdobeTypeSupport x64 CS5 10.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {0669F23C-1B69-41B4-A3ED-4F54A5986D66} Adobe Linguistics CS5 x64 5.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {50D2A553-2839-469E-B87D-86DC8C104745} Adobe Photoshop CS5.1 International English Language Pack_x64_AdobePhotoshop12-en_GB_x64 12.1.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Adobe CS5_5\payloads\AdobePhotoshop12-en_GB_x64\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{50D2A553-2839-469E-B87D-86DC8C104745}'. Error: Error 23 Data error (cyclic redundancy check).
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Buzzword CS5.5: Install failed
ERROR: DW050: - Digital Publishing: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5.1 Core_x64: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - Adobe Hunspell Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - Adobe Digital Publishing Application Language Files_AdobeDigitalPublishingAppLang-en_GB: Install failed
ERROR: DW050: - Adobe Linguistics CS5.5: Install failed
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Common Language Files_AdobeInDesign7xCommonLang-en_US: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 International English Language Pack_x64_AdobePhotoshop12-en_GB_x64: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Feature Set Files: Install failed
ERROR: DW050: - Adobe Media Encoder CS5.5 X64: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Common Base Files: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Base Files: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS5.5 Icon Handler: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-en_GB: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Icon Handler x64: Install failed
ERROR: DW050: - Adobe Toolhints CS5.5: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Common Language Files_AdobeInDesign7xCommonLang-en_GB: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Base Files2: Install failed
ERROR: DW050: - Adobe Content Viewer: Install failed

I would run System Restore to a point before the installation attempt to get rid of any bad registry entries, then run the cleaner tool for good measure: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
After that I'd try running MSconfig and turn off all non-essential startup programs (especially malware and anti-virus scanners and third-party firewalls) and non-essential services, then re-boot. Ignore the warning about Diagnostic mode and run the Installer again. You can re-run MSconfig after install to restore normal startup.

Itunes and Quicktime Installation issues

I am getting seriously frustrated! I am tring to install the Itunes 8 version and I already had Quicktime on my computer. It keeps giving me the same error: "There is a problem with this windows installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor." I don't know what this means or what to do? I went online and made sure that I checked for updates and installed them. I did the removal and reinstallation separately of Quicktime, but when I go to reinstall Quicktime it gives me the same error message now. Anybody have any ideas?

Check out the itunes technical support group website. I had similar problems and they had the answer I needed there. Here's the link. Just copy and paste and you'll get to the area that solved my problem. http://www.techsupportforum.com/microsoft-support/windows-xp-support/108283-itun es-will-not-install-uninstall.html

Query to replace old report where I could type in an exe name and pick an OU for it to recurse

In SCCM 2007 there was a report I always used that allowed me to type in a .exe and then specify an OU, and it would show me all computers in that OU and it's sub-OU's that had that file name, and show me the version of that file.
I can't seem to find a report that allows that in SCCM 2012, so I'm wondering if someone out there has a query I could setup that would essentially provide the same data to me.

Thanks. I think I did something wrong though. Here's what I put into the wql box and it says I have a syntax error
select s.Netbios_Name0,
max(ou.System_OU_Name0) as OU
, sf.FileName,
sf.FilePath
,sf.FileVersion
from v_R_System s
join v_GS_SoftwareFile sf on sf.ResourceID=s.ResourceID
join v_RA_System_SystemOUName ou on ou.ResourceID=s.ResourceID
where ou.System_OU_Name0 like 'my.domain.com/MainOU/SubOuIWant%'
and sf.FileName like 'firefox%'
group by s.Netbios_Name0,
ou.System_OU_Name0,
sf.FileName,
sf.FilePath
,sf.FileVersion

Warcraft 3 and TFT installation issue

Hi, i can't install my TFT? I already installed WC 3 and when i tried to play it, it works perfectly fine but when i tried to install TFT, the installer message is "Install WC 3 first before installing TFT". I already installed WC3...can anyone please help me?

Hi VJ,
Are you referring to this step in the installation procedure (Creating the WebLogic Domain for Endeca Server)?
http://docs.oracle.com/cd/E37502_01/server.751/es_install/toc.htm#Creating%20the%20WebLogic%20domain%20for%20Endeca%20Server
If so, this indicates that either the Endeca Server, or the ADF were not properly installed. Are you sure you are using the WLS and ADF packages as indicated in the documentation? Are you using Sun JDK 6?
Julia

OPTIARC-AD7560A-D803.exe firmware and CRC/installation issues for DvD RW drive

Similar Messages

Maybe you are looking for