Optiarc DVD RW AD-7561S stopped working, we need Firmware update !

Hello!
My dvd RW drive (Optiarc DVD RW AD-7561S ) is not working properly when reading and writing to dvds(still working good with normal cds), i have tried lot of solutions and by the way i have been impressed by the number of people who had problems with AD-7561S that stopped working.
I still use the same OS (Vista 32bit) and have HP notebook 6730S , i tried the upper filter trick by Microsoft but it doesn't worked so i think the problem is only with this drive, i think the only way to proceed is to update the firmware, i didn't find the appropriaté firmware in the Sony-Optiarc website, they told to me by email that the OEM firmware version must be downloaded from the pc fabricant so i searched in the hp support, there's some optiarc's firmware but not exactly the AD-7561S.
My only hope to make this drive working is to update the firmware, my only request to HP is to give us the firmware version that will solve our problem or tell us the suitable firmware of another drive to use from the Optiarc website that will work with (i mean to use the AD-7560S for example for my AD-7561S but we need someone who know if it's equivalent and will not damage the drive) , thank you !
I hope you will reply to my(our) request !

Similar Messages

Built-in camera stopped working after 7CCN35WW firmware update

Applied 7CCN35WW over the 34 firmware. Veriface stopped working, says there's no camera present even though camera is present in Device manager. Skype is not working either, says camera is used by another process even after a fresh restart.
Solved!
Go to Solution.

Fixed it by going into BIOS and saving the existing config. Camera is working again.

Bluetooth doesn't work after E90 firmware update!

Nokia staff - help needed!
Bluetooth has stopped working after E90 firmware update.
The following on-screen message is shown: "Unable to perform Bluetooth operation!"
P.S. Reinstalling firmware via Nokia software update doesn't help at all. If connectivity problem still can be solved with USB cable, the worst tning is that I can't use my phone's BT handsfree when driving.

Hi hanzzi
No information as to what device you are using, but try deleting E:\CITIES + .qf file from memory card then restart OVI Maps application to re-define folder structure required to download regional mapping using OVI Suite.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Cannot use BD DVD Player: WIN DVD MFC application has stopped working

Tried to install my old version of WinDVD and failed and in the process may have accidentally deleted a file,
for now whenever I try and use BD DVD Player I get the following message:
'WIN DVD MFC application has stopped working '
I tried using restore point but still get it, can anyone advise please?

It will be interesting to know which notebook model do you have.
Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly.

Equium A100: DVD/CD drive has stopped working code 22

Toshiba Equium A100 on Vista operating.
DVD/CD drive has stopped working and is showing as disabled. Have tried to re-enable but error code 22 returned. Can anyone help?

Hi
The Microsoft page provides these details about error code 22
*This device is disabled. (Code 22)*
_Recommended resolution_
+Enable the device by using Device Manager.+
+In Device Manager, click Action, and then click Enable Device. This starts the Enable Device wizard. Follow the instructions.+
It looks like you have already tired this. Well, in your case I would recommend removing the CD/DVD drive from the device list in the device manager. Just simply mark the device an press delete.
Then restart the notebook and check what happens.

WHENEVER i LOAD ITUNES i GET A POP UP STATING THAT iTUNES HAS STOPPED WORKING AND NEEDS TO CLOSE. wHEN wINDOWS FINDS THE PROBLEM, THEY WILL NOTIFY ME. tHIS HAPPENS ALL THE TIME. i UNINSTALLED AND INSTALLED TWICE AND IT STILL HAPPENS. HOW DO I CORRRECT

I keep getting a pop up on Itunes when I try to add a file saying that ITUNES HAS STOPPED WORKING AN NEEDS TO CLOSE. W indows will notify me when corrected. iuninstalled and reinstalled 3 times to no avail. how do i fix?

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

Itunes stopped working and needs to close

for about 2 weeks now, itunes gives an error message that it has stopped working and needs to close when i try to sync my phone. i have updated to the latest versions on my laptop as well as my phone. i have an iphone 4 and my laptop is running windows 7. i have seen many, many similar posts going back a couple of years but have yet to see a solution. apple support is as worthless as ever, spouting off computer nerd solutions to non-computer nerds. can anyone tell me, in plain english, how to fix this? thank you in advance for any help or advice you can provide.

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......

Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want.

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

In what way is it not working?
Please describe in detail all you have attempted to do in order to resolve the issue.

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.

jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

My M-AUDIO Keystation Mini 32 stopped working right when I updated to Mavericks. What can I do to fix this?

My M-AUDIO Keystation Mini 32 stopped working right when I updated to Mavericks. What can I do to fix this?
Only 25 of the 32 keys are working. The last 7 keys are not. I tried to use it on both GarageBand and Logic Pro and it's all the same.

I resolved with a very cheap USB hub (a simple gadget I had at home, nothing professional...)

HT1414 my top button has stopped working since the ios7 update can you help the shop said its not directly the button as its clicking properly

my top button has stopped working since the ios7 update and the shop said the actual button is working ok does anybody have an answer for this

i found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back

Optiarc DVD RW AD-7561S stopped working, we need Firmware update !

Similar Messages

Maybe you are looking for