Optical audio and the iPad headphone jack

I have an optical audio cable going into my tv sound system - will an the iPad sound connect to this thru the headphone jack? I can not play sound thru my iPhone, but can thru my iMac.

It is the only one that I have seen. The only other way would be to get a converter to from analog to SPDIF optical and use either the headphone jack or another interface. Like this one:
http://www.amazon.com/Analog-Digital-Optical-Converter-Adapter/dp/B0055EBH5S

Similar Messages

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Since I updated to 5.0.1 on my iPad2 my Apogee One no longer works correctly. I get loud pops and crackles and my monitoring has changed completely. I can no longer monitor through the Ipad headphone socket

On previous ioS Garageband worked perfectly. The crackles now make it impossible to record with an external mic or with the built-in mic on the One. I used to be able to monitor via headphones plugged into the ipad headphone socket. Now when I plug the Apogee one into the iPad camera port I get sound for 1-2 secs and then nothing. The only way I can monitor then is through the Apogee One headaphone connection but it is loud and distorted.

Minor update: I have multiple PC's in my office. This same iPad and other apple devices properly work and sync with their connection to this other computer. Both computers are running the 64bit iTunes and both have Windows 7 64bit OS running on both machines. I tried deactivating firewalls and even deleted the iTunes with a fresh installation with no avail.
Something is keeping my Apple mobile devices (iPods, iPads) from being recognized within iTunes. However, they all are properly recognized by my PC.

27" iMac i7 system noises/hash out of the analog headphone jack.

Anybody have any info on the cause of this noise?? My 27" iMac i7 emits some sort of system noise out of the ANALOG headphone jack when hooked up to external powered speakers or mixing board. I thought it might be be some sort of grounding issue, since it's only when it's hooked into some other POWERED piece of gear, but I've tried everything I can think of to isolate the source and I can't.
These system noises occur only when using the analog headphone jack, and only when hooked up to anything that uses AC power. They are not heard when using headphones directly plugged in the back of the iMac. The only way around the hash is to use the OPTICAL out of the headphone jack (which is clean as a whistle). The noises vary, depending on the activity on the monitor: scrolling anything, selecting an area, moving windows, web pages loading (especially noisy with a lot of Flash content), etc... all have distinct noises. They are the same in both channels and are not affected by the System volume control, even when the System volume is muted. One interesting thing I noticed - when the Sound panel of System Prefs is open, switching back and forth between Output and Input causes the noise to be significantly quieter on Input, then loud again on Output. In a studio environment, it's impossible to edit with these noise constantly in the background. The noises do not affect a recording, only playback.
Here's an example: http://tinyurl.com/y9ctk29

Slice-
Sorry, hadn't seen your post on the other thread yet. My reply's there, but basically, hub didn't work for me and the junk is still coming out of the headphone jack with no USB interface at all. I'm thinking it's graphics card related... lots of problems with them. At any rate, I'll be talking to an Apple tech in about half an hour, so maybe I'll get an answer then.

Interactive Whiteboards and the Ipad

Hi there sports fans.
I work in a special needs school and the iPad is the way of the future... but, I need to be able to visually demonstrate iPad use through and interactive Whiteboard... So this is the crux of the question:
How can I use my **Interactive Whiteboard* to* show my Ipad screen and *control my Ipad?*
*please note... I do not want to control the whiteboard... that I can do already.
Thanks friends. let the educational revolution begin!

There are a number of options available. You can use Apple's iPad to VGA adaptor to connect the iPad to your IWB via a VGA cable. This will display your iPad on your IWB to model the activities to your students. This doesn't transmit sound from the iPad, you would have to use a 3.5 audio jack to your amp or sound setup to get the full experience.
The VGA adaptor is limiting in length but works great. Your second option is Apple TV. This will mirror your iPad to your IWB wirelessly. This uses Apple's Bonjour to communicate across your wireless network. You may have to enable multicast on your controller for this to work. Apple TV require a HDMI connection to your display. If your IWB projector does not have a HDMI input, then you can get a HDMI to VGA convertor to get it to work. Depending on your audio setup, you may need a DAC convertor to transmit the audio across wireless as well.
This is great and enables you to walk throughout the school (depending on the strenght of your wirelss network) and mirror directly to your IWB. This only works with the iPad 2 and new iPad. The iPad 1 will not mirror. The real value comes when you can ask the children to display their iPads on the IWB wirelessly from their desks to showcase their work. You can put a passcode on Apple TV to prevent this from happening without permission, or if you have multiple ATV's in the school.
The alternative wirless option is to use some software such as Reflection or AirServer. This software is installed on the PC or Laptop connected to the IWB. The iPad then uses the same method for Apple TV but goes to the computer beofre diplaying on the IWB.
AirServer offers the ability for mirror of up to 16 iPads at the same time. Brilliant for comparing work the children have done. AirServer is available on both a PC and Mac, although at present, only the Mac version mirrors audio and visual. I understand that a PC version is in development and will be updated soon.

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
    Apple won't permit PC software that infringes its proprietary apps.
    Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
    School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
    Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
    Classrooms are not able to keep up with the technology of using the iPad
    Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
    Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

HT4623 I have lost my camera application and the ipad is asking for a 4 digit pass code that I do not know.

My camera application has disappeared and the ipad wants a 4 digit number pass code that I did not set up. It will not allow me to reset defaults without this pass code. Please help

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT4623 I bought an ipad from a friend and I was trying to put in apps and they won't go in because it says I need higher than the 5.1.1. I check for updates and it tells me it is up to date on both itunes and the ipad itself. I have latest itunes.

I have been trying to put in new apps but it says I need a newer ios version. It currently has 5.1.1. I have tried resetting it back to factory. I have tried updating it through itunes and the ipad and they both say it is up to date.

The original iPad can't be updated past 5.1.1.
(100805)

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4199 What does it mean when I click on my wifi name and the bars come up but the network keeps thinking and the ipad says safari cannot open the page because it is not connected to the internet. ?

What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?

When you click on the WiFi network name, have you also provided the password for accessing the network? You should get a dialogue box asking you for the security information the first time you connect.
If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad. See if it now connects correctly.

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both iPhone and iPad and the iPad was also removely wiped. Can Apple help me somehow?

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
PS. the apple ID I'm using on the discussons is not the hacked one.

Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.

TS1702 When I try and access March 2013 in Calendar the app simply closes. This happens if I click March in the month tape at bottom of screen or if I try swiping from February or April. Is there a fix, I've tried restarting the app and the iPad to no af

When I try and access March 2013 in Calendar the app simply closes. This happens if I click March in the month tape at bottom of screen or if I try swiping from February or April. Is there a fix, I've tried restarting the app and the iPad to no affect

See this discussion with the exact same issue:
https://discussions.apple.com/thread/4690697?tstart=0

Optical audio and the iPad headphone jack

Similar Messages

Maybe you are looking for