Optical audio in apple tv not working

This is a question

Welcome to the Apple Community.
You will need to provide more information if you want us to help you.

Similar Messages

TS3789 digital audio from apple tv not working

the digital audio output from my apple tv to my reciever was working initially. It is no longer working. Any ideas?

Welcome to the Apple Community.
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of comments? You might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

Audio CD import is not working the cd is ejected before itunes can read it

audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
Lainey

Does this happen with all cd's or one in particular?
Reset the SMC http://support.apple.com/kb/HT3964
Reset the PRAM http://support.apple.com/kb/HT1379
Try a cleaning disc. You can get them at places like Radio Shack.
If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

Apple remote not working

My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

Hi Focus,
I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
I hope help somebody.

Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

Apple remote not working, is there a way to setup Apple TV without the remote

Apple remote not working, is there a way to setup Apple TV without the remote

Welcome to the Apple Community Sylvia.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

Why is my apple id not working in itunes store?

why is my apple id not working in itunes store?

When is it asking for it ?
If you are updating from iOS 7+ to 7.0.4 then did you have Find My iPod enabled on it ? If you did then it might be asking for the password for your account when you set that 'on'.

Why is my Apple ID not working after I've reset it, Why is my Apple ID not working after I've reset it

Why is my Apple ID not working after I've reset it? After I change it the password icon pops up and I type the new password in and it says it's wrong? What's happening

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

My apple ID not working in Apple Store.

My apple ID not working in Apple Store, in iTunes work fine and with my iPhone work fine too but in my iMac only works in iTunes, App Store and iCloud say "Incorrect password or username", I reset my keychain with the same result. My OS is 10.7.4
In my iPhone I can acces to App Store, Itunes and iCloud but in my iMac only work in iTunes and online iCloud (icloud.com), the App Store and iCloud system say "Incorrect password or username" and never can loging.
My Apple ID its confirmed and I buy in iTunes perfect...
Please help, I have this problem for a long time...

This is quite strange, as MAS is really the same store as iTS. It's the same account.
This issue has to be something else going on with your system, and not at the Store's end.
How about make a new user account for testing. And see what happens when you try to use your Apple ID through there.

Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

Since updated softwear on iPad to 7.0 Apple TV not working?

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

Apple tv not working with panosonic TH-50PX75U old.

Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

Apple tv not working

apple tv not working - message NO SIGNAL for this plasma. Was working before. Major difference a download from itunes 4 g movie yesterday. I have tried rebooting the apple device more than once. Switched off all plugs,checked all plug positions. Can anybody help please? Australia. Maggie.APple tv oroblem

Good morning Winston.
thanks.
i eventually found a one-liner in THE APPLE MANUAL which fixed it.
i.e. Resetting the APPLE TV. The instruction was to use the silver small operating APPLE device,
HOLD DOWN THE MENU BUTTON AT THE SAME TIME AS THE BLACK DOWN BUTTON UNTIL THE WHITE LIGHT ON THE APPLE TV STARTED BLINKING RAPID WHICH IT DID. I then released the pressure ON THE BUTTONS and within a few moments, the TV screen cleared and it started working again.
The interesting part is that I had thought a reset of the APPLE TV may have taken place when it was unplugged. BUT NO IT DID NOT.
Also, there was much helpful comment in the forums but not this simple solution which I found ON the WEBSITE APPLE MANUAL.
HOPE THE ABOVE IS CLEAR ENOUGH TO HELP OTHERS. Maggie 3/1/2015

Apple mail not working

apple is not working anymore after downloading an email. I get the apple wheel all the time. Force stop and open mail again gives always the apple wheel.

Use and methodically follow the troubleshooting steps in Apple's OS X Mail: Troubleshooting sending and receiving email messages located at http://support.apple.com/kb/ts3276

Optical mouse (AVF AM1940U) is not working in CQ40-101TU which is running Windows 7 32-bit.

Hi. I'm using Compaq CQ40-101TU which is running Windows 7 Professional 32-bit.. My optical mouse (AVF AM1940U) is not working in USB ports. The pointer of mouse is always stuck at top of the screen. I can move the mouse left or right to both edges of the screen at the top and can right click in this regard it works but I cannot move the mouse down the screen.
What is the problem? May I know how to solve it?
Thanks.

Ya. Another mouse didn't have problem. This is the first time I face this problem. When this optical mouse is plugged into USB ports, the driver named "iBall Advanced Mouse" is being installed. After that, my mouse cannot working.
Is that I have to install another driver before using this mouse?
Thanks.

Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Optical audio in apple tv not working

Similar Messages

Maybe you are looking for