Optical audio in connection

I need to connect my optical s/pdf audio input to the s/pdf output of a lexicon mpx 100 multi effect. It needs an ocptical cable with rca and minijack. Does someone knows where can I get it ?
Thanks

You'll need an M-Audio CO3 Digital Converter, for going from S/PDIF to Optical Toslink!
http://www.core-sound.com/co3/1.php
Message was edited by: Ianiv Lutzker

Similar Messages

  • When should I use "Optical Audio"?

    Hello,
    I have the new (3rd Gen) Apple TV connected wirelessly to my home theater and HDTV. I have the HDMI cable connected to my surround-sound receiver. I was under the impression that the HDMI cable carries both sound AND audio. If this is the case, I'm trying to figure out what the Optical Audio input is for? I went ahead and purchased an Optical Audio cable and connected it to my surround sound receiver.
    My question is this: Do I need to have that Optical Audio cable connected, or should I disconnect it and just use the HDMI connection? I looked in the AppleTV manual and it does not describe why you would connect this, and I'm scratching my head trying to understand this.
    Thanks much!

    Some old receivers didn't handle digital audio over HDMI very well - the only reason I can think of using the port.
    If it worked without the optical before, you don't need it now!

  • Optical Audio Only

    Trying to perform initial wireless configuration for ATV 2gen on my network. Problem is I'm only trying to stream audio form iTunes (no Video at this point; no TV!) All I have connected to the ATV is the power cord, and the optical audio output cable going to optical input on my home theater receiver.
    1. Is this possible without anything connected to the ATV HDMI output?
    2. If it is possible, how can I perform the wire wireless config of the ATV without being able to see the config menu.
    3. Is there a post anywhere with a screen-shot or video that shows what the ATV config screen would look like. I'd be able to then use the remote and config it blindly based on what the screen shot looks like.
    Thx for the help.

    Thanks that worked; connected to wireless. But, getting audio through the TV only, nothing through the home stereo system. I have the optical audio cable connected from the ATV to a DVD A/V optical input on my home receiver, but no audio coming through the home receiver speakers. Any ideas?

  • No HDMI or Optical Audio on my TV - how to connect Apple TV

    I am trying to set up my new 3rd generation Apple TV to a 1st generation HDTV that has only one HDMI input abd no optical audio inputs. The single HDMI input is connected to my cable box.
    So what is the best work around for me to connect my Apple TV to mey TV?
    thank you!

    C Nelson wrote:
    There are many HDMI switches out there. Any advice on which ones are best?
    I cannot personally recommend one as I have no need to use one.
    Read reviews for the ones in your price range.
    Also, does the HDMI switch transmit audio?
    It absolutely should but be sure to read the reviews and specs for the specific one you are purchasing. Like anything else, I am sure they are some junk switches out there.

  • How to connect Digital Optical Audio output iMac with Receiver Input

    I have connected iMac with onkyo hts-3300 home theater system receiver through optical audio TosLink Cable.( http://www.amazon.com/Digital-Optical-Audio-TosLink-Cable/dp/B001ZU3G2I/ref=sr12?ie=UTF8&qid=1292865309&sr=8-2 ). Unfortunately there is no sound coming out from the Home theater system. I have verified the Receiver optical input is working fine by connecting with my TV optical audio digital out put and the it's working great. The only difference between TV and iMac is, on my TV, it has optical audio digital output and I can use this cable (http://www.amazon.com/Tripp-Lite-A102-02M-Digital-connectors/dp/B0002WPREU/ref=s r11?s=electronics&ie=UTF8&qid=1297320792&sr=1-1) to make it work. I can also verified my optical audio TosLink Cable working because I can see the red light coming out from the cable. So the only problem could be from iMac. I doubt I need to change the additional setting to configure iMac to use external optical audio setting instead of the buit in audio setting. Hoe can I able to do it? or my iMac(IMAC 21.5"/3.06/2X2GB/500GB/9400M-ITP
    MB950ZP/A) doesn't support optical digital audio out put? I have follow this thread http://discussions.apple.com/thread.jspa?messageID=12769423&#12769423 and to my surprise which doesn't work out for me. I doubt that i need to change some setting, but when I got to setting>> sound I cannot change any setting. I was quite depressed aldy. Can someone answer my question as i m a newbie here. Thanks a lot

    Thank you very much for your reply.
    @Király : May i know how to Open Audio Midi Setup? Is this Audio Midi Setup is in the locatated in the Setting in Mac Snow Leapord OS? or how to locate this "Audio Midi Setup " in Mac enviroment. Is it possible to open this Audio Midi Setup in windows 7 enviroment also? I Just want to get the audio from my iMac in Hts-3300 onkyo home theatre. YOur help is much appreciated
    @rkaufmann87 : Thank you very much for your sharing about this http://www.apple.com/airportexpress/ connection. for me what i understand is the digital audio output in airportexpress is the same as the audio out put in iMac in terms of details sepcs. So this airportexpress will only help you connect wirelessly to home theatre system, rather than waired connection. Other than that nothig much difference. So there is no point for me to spend extra bucks to attain the wireless connection. Unless the airportexpress have optical digital input, which i believe not. Correct me if I m worng, thanks

  • Connect apple tv using an optical audio converter

    I want to connect my apple tv to my sound board. The projector has an HDMI input but I need a way to get the optical audio to my sound board which consists of XLR and 1/4" jacks. Does anyone know of a converter that will help me do this for a rather affordable price? Thanks

    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • How do I connect the Apple TV to the home theater if the optical audio port is in use

    I had an airport express connected from the home theater system to the speaker out port on the express through which air play worked just fine. Then the express wouldn't work with my new router so I looked for something to replace it. The new Airport Express was the same price as the Apple TV and so I went with it for the added HDMI from NetFlix benefits. Now I find that the cables I used on the express won't work on the Apple TV. It wants an optical cable but there is only one port on the speakers and it is needed to get the sound from the TV to the speakers. So, is here a work around? An adapter or something? What I really wanted it for more than anything else was to use air play to get my music from the computer to the theater speakers.

    I have a further question about this. It turns out I do have 2 optical audio ports but I was told I wouldn't need it if it was connected via hdmi. I have 4 ports and they are all in use so the question is whether the best solution is to just get an optical audio cable and connect it directly or get an hdmi splitter so I can add in the Apple TV?

  • Connecting apple tv with optical audio cables

    I have a new apple tv and need to connect via dvi to hdmi on my tv. problem is the audio.  I am supposed to connect via option audio but don't know which cables to purchase and where it needs to be connected to FROM apple tv.

    Due to the limited number of HDMI connections on my TV I upgraded my home theater receiver to one with 4 HDMI inputs. I use it for all video and audio switching and the TV stays on one input. Much cleaner cabling as well. An HDMI switch is also an option to look at too. Be aware an automatic switching HDMI switch probably will not work due to the way the ATV sleeps (not sure with the ATV2's). You'll probably need a manual one with push buttons or a remote.
    For the problem at hand, first you need to know what audio input you need with the DVI in on your TV before we can help. To start with you are going to be using optical audio out from the ATV, a Toslink cable out of the ATV to be precise. If your TV's DVI connection matches up to a Toslink digital input that's all you need.
    More than likely it has a single RCA jack which would be a Digital Coax in. In this case you will need a Digital Toslink to Digital Coaxial converter as well as a Digital Coax cable. The Coax cable can be a simple audio cable with RCA jacks.
    If the DVI on the TV matches up with an analog in, usually red and white RCA jacks, you are going a Digital Toslink to an analog L/R stereo converter. And of course the RCA stereo cable.
    MonoPrice.com is a great resource for cheap cables and converter boxes. Link to digital converters http://www.monoprice.com/products/subdepartment.asp?c_id=104&cp_id=10423

  • Does Apple TV and Optical Audio Connection work?

    I've read several posts regarding this issue and I'm a little confused.  Does the Optical Audio work on the Apple TV (generation 3), because I haven't been able get it to work.  I get sound but no stereo/surround sound.  Yet, using the same connection out of my Receiver for my PS3 I do get stero/surround sound.  Have I missed a setting on the Apple TV?

    Is there away I can check the Apple TV Optical Audio connection to see if it's working?  The physical connection seems to be fine.  Since the connection to A/V Reciever works, as confirmed by my PS3, I can only assume the Apple TV Optical Audio connection is faulty.  Other ideas on how I might validate if the Apple TV Optical Audio connection is truly "broken."

  • I can't connect digital optical audio cable. No option in drop down bar in audio settings.

    I can't connect digital optical audio cable . No option in drop down bar.

    Try System Preferences > Sound > Output

  • Does anyone use Optical Audio out to connect studio monitors?

    I am planning to snatch a Mac Mini as my studio upgrade. I am also planning on buying some studio monitors (as opposed to just regular speakers). I was wondering what people use to get great, accurate results for under $600. The Mini can achieve optical audio out, apparently. Are there studio monitors that use digital, optical audio as a means to connect? How do fellow Logic home studio users have their audio out set up?

    Scroto Saggins wrote:
    well, optical is digital (right?), so wouldnt it be the only way to get the best, uncolored sound out of a Mac? what other (better) options are there? I started this topic because I dont really notice studio monitors that use optical, and I am wondering why? Whats the downside?
    Because the ones that do, are way over the budget of most people on this forum.
    I have this pair :
    http://www.jblpro.com/catalog/General/Product.aspx?PId=28&MId=5
    They retail at around 1500 per pair. They are not the most expensive ones out there, rather the less expensive ones with digital inputs.
    Cheers

  • Connecting to iMac optical audio out/ overall audio quality?

    Just curious if anyone has done this yet? The iMac says it has optical audio out through the headphone jack but without an adapter I can't see how that's possible. My speakrs accept optical audio in and I really want to connect them to my future iMac. If not, how's the optical from the headphone jack? Is it possible to get 5.1 surround from that port?

    firefighterpilot1 wrote:
    The iMac says it has optical audio out through the headphone jack but without an adapter
    I can't see how that's possible.
    There are two "standard" optical-digital-audio connectors -- the original "square" one is
    still used in most larger audio/video components. The newer/smaller one, used mainly in
    portable gear, is exactly the same size as a mini headphone plug. The iMac's audio jacks
    support either analog or digital-optical connections -- depending on which type of plug
    is inserted.
    Radio Shack carries adapters/converters/cables of both types (usually at outrageously
    high prices). For online vendors, try http://monoprice.com -- great prices and a good
    reputation for quality/service among the HDTV-fanatics on avsforum.com.
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042301&pid=2671&seq=1&format=2
    Is it possible to get 5.1 surround from that port?
    http://www.thismuchiknow.co.uk/?p=24
    Looby

  • Apple TV optical Audio stops working when connected to switch

    Hi everyone,
    I'm installing a brand new Apple TV in the following setup:
    Apple TV (is up to date)
    - HDMI to HD Beamer
    - Optical Audio to Sonos Playbar (Works instantly)
    - Optical audio through switch to Sonos Playbar which doesn't work
    UPC Box
    - HDMI to HD Beamer
    - Optical audio to switch to Sonos Playbar (Works instantly)
    I've tested all the ports on the switch and cables already and they all work. So the weird thing is when I connect the optical from Sonos directly to the Apple TV it works perfect. But when I use the switch it doesn't work. I see a light in the switch so there should be signal...
    The switch I'm using is:
    http://www.allekabels.nl/optische-kabels/5/1424/optische-schakelaar.html
    I've read older questions and tried different audio settings but nothing seems to work. Can anybody help me?

    so i solved my own problem haha here's what i did incase anyone has the same issue
    go to system preferences > sound > output > click on headphones then turn the volume up from mute
    for some reason every time i reconnect to the uni wifi it goes back to mute. not the regular volume only the one through that pathway.

  • I need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    i need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    ATV does not asupport bluetooth for audio or any type of wireless headsets.
    If you want to connect the ATV to a receiver, connect it either via HDMI or Optical Audio.

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for