Optical audio out turns off during silence

My optical audio out port turns off when no sound is being played. When a sound is played my speakers pop as the receiver switches into optical mode. This takes a second so I miss system sounds. I would like to set the optical out to always stay on, even when I'm not listening to music so I can hear these sounds and avoid popping. Does anyone know how to accomplish this?

Note that there are several different ways that an iPod or Nano can support TV output, depending on the iPod model & type of connection. The charts at iPod and iPhone: TV out support may be of some help with this, but it still can be confusing, depending on which of the two Apple docks with very similar names you might have used, or if you used any third party connection products.
Because of this, it probably would be best for each of you asking for a solution to describe in detail which items you used in your connections, & which of the TV's video input jacks that you plugged the output connectors into.

Similar Messages

  • TV Out Turns Off During Movie Playback !!!!!

    OK Apple got my $200.00 and now no video playback on the TV....
    I got my cable (You know the one with USB and 3 RCA's on one end) Plugged into the 4G and my TV. I go to settings in the video menu and select (TV OUT YES) (NTSC)and (Wide Screen). Time to play the movie right... NO! it only plays for a few seconds and the turns the TV OUT to OFF all by itself...
    Next hook up sister's Classic to same cable and it works great!
    Great little product (POS) and the best part is I checked apple.com for support and nothing just this forum where you might find help if really lucky!
    So iPod wizards change my mind on this thing and help me figure this issue out if possible
    Thanks "Frustrated in Oregon"

    Note that there are several different ways that an iPod or Nano can support TV output, depending on the iPod model & type of connection. The charts at iPod and iPhone: TV out support may be of some help with this, but it still can be confusing, depending on which of the two Apple docks with very similar names you might have used, or if you used any third party connection products.
    Because of this, it probably would be best for each of you asking for a solution to describe in detail which items you used in your connections, & which of the TV's video input jacks that you plugged the output connectors into.

  • Turn off Optical Audio out?

    somehow my headphone jack is now set to optical audio out. I want to get it back to outputting audio to the internal speakers. how do I switch the jack back to non-optical output?

    Your problem is due to a defective switch integral to the audio out jack.
    Sometimes it can be remedied by inserting and removing an audio plug a few times. Other people have had success by fishing a toothpick around in the audio jack to free up the stuck switch.

  • Noisy audio +  audio output turns off / on - annoying

    The audio out on a MBP (10.5.4) turns off after about 30 seconds, then turns back on when it makes any sound such as an alert sound, playing a song in iTunes / Quicktime, etc...
    Case and point: Listen with headphones (or with your ear close to the laptop speaker) and do something that requires audio - e.g. just duplicate a file using Apple+D, you'll hear your alert sound. Then listen for 30 seconds - you will hear a faint hiss (with good headphones), then a click/pop as the audio turns off. WHY?
    And this is really annoying: there is also a click/pop sound when you start to play something if the audio has turned off, i.e. the audio output has to turn itself ON again. Plus, in iTunes there is digital distortion and some very faint high-frequency hums.
    I have my old PowerBook G4 sitting next to this MBP and it does NOT do this. So it begs the question: Why does Apple have to change things like this? Why change the audio output to turn off after 30 seconds? How is it that iTunes on a MBP creates digital distortion?
    There is NO digital distortion within iTunes on the Powerbook G4. (I compared the same exact track from iTunes on the MBP to iTunes on the Powerbook G4.) There is NO digital distortion when playing audio through Quicktime on either laptop.
    I don't get it. Apple/Mac should be improving their products. They bought Logic 8 from Emagic! That must mean they are interested in audio, yes? Then WHY cheapen the audio outs?
    This is essentially a post to see if there has been any fixes for this problem, or to see if Apple/Mac really care or noticed. I hope it is the former.......

    I have a brand new Macbook Pro Unibody 15'', which presents the same issues, but with some peculiarities. I have M-Audio reference speakers, connected with an analog cable minijack to RCA cable (note: they work perfectly when connected to the ext. firewire audio interface..) .
    The weird thing is related to whether I have the power cord plugged in or not:
    - with the magsafe power cord plugged in I only hear the intermittent "high pitched noises" described here: http://tech.kateva.org/2007/06/macintouch-review-audio-noise-in-new.html. They are apparently random .
    - when I unplug the power cord I can hear all kind of sounds and noises: I can hear the harddrive spinning and seeking, a "fixed" background hum noise, more noises even when I type or move the mouse or use the trackpad.
    UPDATE: When the external audio interface is not plugged in (it's a M-Audio firewire solo) I hear no more noises from the internal audio output ! Must be all related to some grounding issues of the audio interface.

  • Optical audio out to receiver

    Hello, I have a powermac g5 hooked up to a vsx-1014tx Pioneer receiver via digital optical audio. When I'm using dvd player and select "system sound output" in Dvd Player's preferences I get audio through the digital optical hookup and sound out of the speakers, but the receiver's display doesn't switch to DIGITAL (it displays whatever sound processor I select on the receiver such as dolby prologic II) i.e. the computer outputs 2 channel digital audio. When I switch to "digital out - built in audio" in Dvd Player's preferences, there is no sound output while watching a movie. The receiver flickers between DIGITAL and DD Prologic II. Is there anything that you know of that will allow me to get 5.1 Dolby Digital put out through the G5's optical audio out? (settings, audio codec, ect.)
    P.S. I have software updated and in system preferences/sound I have digital out selected
    Thanks for your help
    Daron

    Not sure if it will help resolve your issue, but you can make more detailed adjustments to the audio output using +Audio MIDI Setup+ utility, which is in your Utilities folder.

  • Optical Audio Out to Speakers?

    I was wondering if it is possible to connect the optical audio out on my ATV2 to the 3.5mm audio jack on my bose Companion 3 speakers?
    -thanks

    To be honest I have no idea when it comes to this kind of stuff. I did find this link though.
    http://forums.cnet.com/7723-7596_102-514932/bose-companion-3-and-other-audio-inp ut/
    thanks for your help

  • Optical audio out & 5.1

    Hi,
    I wonder if the optical audio out of the ATV 2G is handling 5.1 audio signal.
    Thanks.

    DD5.1 is carried over both HDMI and optical (where the content has a DD5.1 audio track).

  • Optical audio out from Mac Pro to preamp

    I want to use the optical audio out to a preamp. I am finding only very high end components. Is there anything affordable?

    Do you already own the Mac Pro and preamp? All you need is an S/PDIF cable. Easily attainable for ~$20 or so. If it's not that simple, what are you referring to as "very high end components" being all you can find?

  • Question on optical audio out

    Hi all, I recently got an entry level 5.1 surround system for my PC (Logitech X-530, if you're that curious) and am wondering if it's possible to utilize my optical audio out with this system. From what I gather, I'd need some kind of decoder, but beyond that, I'm lost. I've tried googling it and searched around this forum a bit, but I can't seem to be pointed to any one product that'll do this. Any help is appreciated.

    Ok, the speakers you got are just powered speakers with analog inputs.
    They do not have the better digital inputs and do 5.1 decoding.
    Mac's don't do 5.1 decoding, so you need either a separate device (like a 5.1-7.1 decoding receiver with digital optical inputs) or a M-Audio sound card installed in your PCI slots.
    The M-Audio card for the Mac will use your CPU's to do the 5.1 decoding and send it out analog ports which you can connect those speakers too.
    The M-Audio card produces line level output, no amplification. But your powered speaks will do the amplification.
    http://images.devshed.com/dh/stories/Logitech%20x530/image005.jpg
    (The three plugs on the right are for connecting to a sound card)
    If your really into better sound, a quality 5.1-7.1 receiver with digital optical inputs (toslink cable) and good speakers with 80+ watts each and a decent 100+ watt subwoofer will make you cry with happiness. Of course you need to pay over $1000 and up. But it's worth it if your into music.
    Check out the Volume Logic iTunes plugin, it's cheap and makes your music sound so much better.
    NOTE! Make sure you check that the current M-Audio card will work in your Mac. The PCI spec of the M-Audio card may not match the one's needed by your certain spec of PowerMac G5.

  • Analog vs. optical audio out ... and what cable to I use?

    I've ordered an iPod Hi-Fi, which I intend to use in place of external speakers for my G5. I have two questions:
    First, do I want to connect using the analog or the optical audio out?
    Second, if the latter, what kind of cable to I need if the optical is preferable?
    Thanks

    I don't have a wireless network -- the house we live in is wired for Ethernet, and neither of us use a portable computer. My only concern, therefore, is to find a cable that will go from the PowerMac G5 optical audio out to the audio in on iPod Hi-Fi. From what I've been able to learn online, the former is Toslink, the latter -- as you say -- mini. So I'm assuming that the "mini-to-optical digital Toslink audio cable" will do the job.
    I confess, however, that most of this information has not been easy to come by. Apple could certainly do a better job here.

  • What type of connectors needed for optical audio out?

    Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
    Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
    Thanks!

    If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
    http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
    I use one myself, they work fine.

  • Does the MBA have an optical audio out (toslink)?

    Does the MBA have an optical audio out (toslink)?

    The MacBook Pro and iMacs have digital audio out routed through the headphone jack.  A physical converter (costing a few cents) must be used to connect a regular TOSLINK cable.
    The MacBook Air apparently does not have this feature.
    As to true Thunderbolt 'adaptors' I have yet to see any hit the market.  I would suggest not holding your breath while waiting for useful Thunderbolt technology to appear--one day perhaps, but not now. I would love to be proven wrong about this--I could really use the Thunderbolt<->FW800 adapter

  • Does anyone use Optical Audio out to connect studio monitors?

    I am planning to snatch a Mac Mini as my studio upgrade. I am also planning on buying some studio monitors (as opposed to just regular speakers). I was wondering what people use to get great, accurate results for under $600. The Mini can achieve optical audio out, apparently. Are there studio monitors that use digital, optical audio as a means to connect? How do fellow Logic home studio users have their audio out set up?

    Scroto Saggins wrote:
    well, optical is digital (right?), so wouldnt it be the only way to get the best, uncolored sound out of a Mac? what other (better) options are there? I started this topic because I dont really notice studio monitors that use optical, and I am wondering why? Whats the downside?
    Because the ones that do, are way over the budget of most people on this forum.
    I have this pair :
    http://www.jblpro.com/catalog/General/Product.aspx?PId=28&MId=5
    They retail at around 1500 per pair. They are not the most expensive ones out there, rather the less expensive ones with digital inputs.
    Cheers

  • Connecting to iMac optical audio out/ overall audio quality?

    Just curious if anyone has done this yet? The iMac says it has optical audio out through the headphone jack but without an adapter I can't see how that's possible. My speakrs accept optical audio in and I really want to connect them to my future iMac. If not, how's the optical from the headphone jack? Is it possible to get 5.1 surround from that port?

    firefighterpilot1 wrote:
    The iMac says it has optical audio out through the headphone jack but without an adapter
    I can't see how that's possible.
    There are two "standard" optical-digital-audio connectors -- the original "square" one is
    still used in most larger audio/video components. The newer/smaller one, used mainly in
    portable gear, is exactly the same size as a mini headphone plug. The iMac's audio jacks
    support either analog or digital-optical connections -- depending on which type of plug
    is inserted.
    Radio Shack carries adapters/converters/cables of both types (usually at outrageously
    high prices). For online vendors, try http://monoprice.com -- great prices and a good
    reputation for quality/service among the HDTV-fanatics on avsforum.com.
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042301&pid=2671&seq=1&format=2
    Is it possible to get 5.1 surround from that port?
    http://www.thismuchiknow.co.uk/?p=24
    Looby

  • Optical audio in passing through to optical audio out... Is it possible?

    Hello,
    Is there anyway to have the optical audio in passthrough to optical audio out? I use my iMac as a home-entertainment box with a Elgato Hybrid getting video-signals from a cable-box. My iMac is connnected via fibre-cable to a surround-reciever.
    The reciever has only one optical input, and the cable-box also has digital audio via optical fibre. So in order for me to not have to switch cables when watching tv on the iMac, I would like to send the optical audio from the cable-box to the reciever, via the iMac.
    What really bothers me is the fact that the audio-drivers supplied with bootcamp let you do exactly what I want in windows!
    So I know for a fact that the hardware is up for it. I've tried lineIn, (an audio app) but that app doesn't play nicely with EyeTV2.
    Can anyone help me?
    /Fredrik

    I found the answer to my problems. The answer was another app from http://www.rogueamoeba.com called "Audio HiJack Pro". It allows me to select "Digital Audio In" and route it to "Digital Audio Out" "bypassing" the system all togheter. So now I get 5.1 Dolby Digital from my set-top cablebox to my reciever without having to switch cables. Yay!
    24" iMac core2duo   Mac OS X (10.4.9)  

Maybe you are looking for

  • How to merge work areas of same internal table

    Hi Experts, I have a requirement to merge two work areas into 3rd work area where all 3 belonging to same internal table like example below.         person | activity | location | wa1: 001     |    A       |              |         person | activity |

  • Running Mac apps from the Unix command line

    I hope I don't offend Mac lovers with this question, but as a total Mac newbie, I find Finder cumbersome. This may change as I learn all the features and keyboard shortcuts. but I don't think so. I've been playing with computers for 40 years and Unix

  • Arboshop authentication  request

    Hi at apparently  random points when i am browsing using safari  on my fully up to date iPad air i get a popup requesting authentication to www.arboshp.de to my knowledge i have never been on this site i've tried clearing all browser data and have re

  • Xclock and rapidwiz installer does not work

    We are running Oracle E-Business suites 11.5.10.2 on Linux OEL 5 two node vmware system. cannot run xclock and rapidwiz instaler. I have set DISPLAY like that DISPLAY=:0.0; export DISPLAY when I run xclock, don't get any error message but clock does

  • Problems with editing name on Skype account

    Hi I'm new to the community. I mistakenly gave my first and last name as my first name when I signed-up for one of my Skype accounts (username "redacted for privacy"). I therefore do not have my last name listed in that account. I tried correcting th