Optical Audio to AUX (headphones) on Apple TV 3

Okay so I am looking to buy an Apple TV, but I want to be able to hook in my headphones at time to it. I also have a very basic audio system that just uses AUX cords to connect to it. What adaptors do I need to have to take the sound from Optical Audio to

There is no facility to use headphones with the Apple TV, wireless or otherwise, you would need to use them in conjunction with your sound system.
For Optical to audio conversion you would need something like this:
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Similar Messages

  • How do to set up optical audio cable on an new Apple TV

    I connected the HDMI on the tv and the optical cable on the surround system but I just listen the tv.
    how can I set up the Apple TV with the optical cable??

    depend on your surround system
    I connect my appletv by hdmi to tv
    and I connect my optical to my receiver
    they both play the same audio so I mute the tv and just listen to the receiver
    both are sony and with the reciever I choose the inputsource they call BD which would be for blue ray disc because they name their optical input ports for some reason

  • Apple TV 2 Optical Audio Issues

    Hey everyone.
    I'm usually a DIY kind of person, but at a certain point I just need some help. I recently bought an Apple TV 2nd gen, which I really enjoy. However, being an owner of multiple Apple devices, it's somewhat conditioned me to expect a level of fluidity with everything of theirs I buy. The problem I'm having is with the audio, and it might seem small, but it's driving me nuts.
    My setup is a mut. I have a 24" or so Samsung HDTV where I have the HDMI plugged into. I use an optical audio cable to connect the Apple TV to an ancient LGDVT418 receiver, to which a Bose Acoustimass III speaker set is connected. It seems like the problem could be in the receiver, but even though it's very old, it's worked with just about anything I've hooked up to it in the past. The smaller issue is the fact that the clicking noises in the menu only sound every once in a while, a problem that doesn't happen when the sound is coming from the HDTV.
    The bigger problem is the "delay" in almost everything I stream. I use quotes because as a musician, delay means there's a gap between what's being played and when you hear it. This is different. On Netflix, for example, when I start a TV show, it loads properly, but there's about two seconds before the audio actually starts playing. The video is perfectly in sync though. At first I tried to ignore it, but it's really started to bug me. This also happens with movies and TV shows on iTunes, and especially when using AirPlay from my iPhone or macbook.
    Any help would be much appreciated!

    The manual says :
         Optical digital audio port
         Connect Apple TV to a home theater receiver that has an optical digital audio port,using an optical digital audio (also called S/PDIF or TOSLINK) cable
    You use an adapter to connect the optical digital audio port to your Beatbox? How does that work? What does the manufacturer say about digital to analog conversion?

  • Optical audio and surround sound speakers for my Mac Pro

    In the back of my Mac Pro there's an in and out for Optical Audio. What is this and are there any surround sound speaker systems out there that will plug into it? Most surround sound speakers seem to require a PC-style triple-input, with three jacks (Green to front, Orange to centre and Black to rear channels). Very few surround sound systems have the additional option for a single headphone socket-style jack, and I'm not sure if they will work terribly well with this single connection.
    Can anyone recommend some speaker choices, particularly in the UK, that will give me good surround sound from the optical audio or single headphone jacks? Many thanks.

    You might want to look at a device called the Griffin FireWave: [http://www.griffintechnology.com/products/firewave]
    It connects to your MacPro via firewire, and has the green/orange/black jacks out to a standard 5.1 speaker system.
    It comes with a software application that lets you customize the sound, and also synthesize surround from mono, stereo, etc., sources.
    It would definitely open up your choices for speaker systems. I'm using one with a Klipsch 5.1 Promedia set of speakers. Works and sounds great.

  • Optical audio vs HDMI

    Hi all
    I have the Apple TV and recently got a 5.1 Surround system set up. I also needed an optical audio cable to link my TV to the Subwoofer. Then I discovered the Apple TV has optical audio.
    Why would the Apple TV need optical audio when you have HDMI?
    Does using the optical audio cable activate all surround sound speakers?
    (Since when using Apple TV, only my front speakers work and not the rear speakers.)
    Thanks !

    Thanks for that.  I did some searching, but couldn't find the posts on the subject.  I didn't know there was a problem with this setup, so I didn't know to look for that.  I think my best bet, at least for now, is to try connecting the HDMI to the TV only.   I found that I do have an optical out on the TV which I can send to the receiver's optical input.  I didn't realize I had this option.  I'm just not 100% sure it will work yet. I have everything I need to do it, I just have to take the time to set it up.  Thanks for the info.

  • Does the Mac mini have optical audio in?

    Hello!
    I have been looking at a lot of forums that say that the Mac mini has optical audio or "Toslink" out and in if you use this adaptor:
    http://www.amazon.com/Recoton-Fiber-Optic-Toslink-Adapter/dp/B0002MQGRM
    I was wondering of this was true. I want to connect my Xbox to the Mac mini so I can monitor the audio coming from it because my display dosen't have speakers.
    Please help me clear up the confusion.

    1972jeepcommando wrote:
    I thought that only the Mac pros had optical audio.
    All Mac Mini models from 2006 on had Optical audio input and output.
    Apple - Mac mini - Technical Specifications

  • I need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    i need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    ATV does not asupport bluetooth for audio or any type of wireless headsets.
    If you want to connect the ATV to a receiver, connect it either via HDMI or Optical Audio.

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Apple TV optical Audio stops working when connected to switch

    Hi everyone,
    I'm installing a brand new Apple TV in the following setup:
    Apple TV (is up to date)
    - HDMI to HD Beamer
    - Optical Audio to Sonos Playbar (Works instantly)
    - Optical audio through switch to Sonos Playbar which doesn't work
    UPC Box
    - HDMI to HD Beamer
    - Optical audio to switch to Sonos Playbar (Works instantly)
    I've tested all the ports on the switch and cables already and they all work. So the weird thing is when I connect the optical from Sonos directly to the Apple TV it works perfect. But when I use the switch it doesn't work. I see a light in the switch so there should be signal...
    The switch I'm using is:
    http://www.allekabels.nl/optische-kabels/5/1424/optische-schakelaar.html
    I've read older questions and tried different audio settings but nothing seems to work. Can anybody help me?

    so i solved my own problem haha here's what i did incase anyone has the same issue
    go to system preferences > sound > output > click on headphones then turn the volume up from mute
    for some reason every time i reconnect to the uni wifi it goes back to mute. not the regular volume only the one through that pathway.

  • No HDMI or Optical Audio on my TV - how to connect Apple TV

    I am trying to set up my new 3rd generation Apple TV to a 1st generation HDTV that has only one HDMI input abd no optical audio inputs. The single HDMI input is connected to my cable box.
    So what is the best work around for me to connect my Apple TV to mey TV?
    thank you!

    C Nelson wrote:
    There are many HDMI switches out there. Any advice on which ones are best?
    I cannot personally recommend one as I have no need to use one.
    Read reviews for the ones in your price range.
    Also, does the HDMI switch transmit audio?
    It absolutely should but be sure to read the reviews and specs for the specific one you are purchasing. Like anything else, I am sure they are some junk switches out there.

  • Connect apple tv using an optical audio converter

    I want to connect my apple tv to my sound board. The projector has an HDMI input but I need a way to get the optical audio to my sound board which consists of XLR and 1/4" jacks. Does anyone know of a converter that will help me do this for a rather affordable price? Thanks

    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • How do I connect the Apple TV to the home theater if the optical audio port is in use

    I had an airport express connected from the home theater system to the speaker out port on the express through which air play worked just fine. Then the express wouldn't work with my new router so I looked for something to replace it. The new Airport Express was the same price as the Apple TV and so I went with it for the added HDMI from NetFlix benefits. Now I find that the cables I used on the express won't work on the Apple TV. It wants an optical cable but there is only one port on the speakers and it is needed to get the sound from the TV to the speakers. So, is here a work around? An adapter or something? What I really wanted it for more than anything else was to use air play to get my music from the computer to the theater speakers.

    I have a further question about this. It turns out I do have 2 optical audio ports but I was told I wouldn't need it if it was connected via hdmi. I have 4 ports and they are all in use so the question is whether the best solution is to just get an optical audio cable and connect it directly or get an hdmi splitter so I can add in the Apple TV?

  • How do I get the Apple tv to play out of my Bose speakers that has the typical white and red plug ins?  Do I need an "optical audio" cord (that is what is available as a plug in on the back of the Apple tv that has the red and the white on the other side?

    How do I get my speakers to play the Apple TV?  My TV is recognizing the Apple TV and the sound is playing out of the TV speakers, but even though I plug my speakers into my TV, it does not play what the TV speakers are playing.  Do I have to plg the speakers into the actual Apple TV unit?  If so, do I need an "optical audio" plug in?

    appletv play audio out of optical out of hdmi and the old alu one play out the RCA too
    the typical the white and red plug ins would be RCA if you have a atv2 (the black one) you cant use
    RCA as that is analog and optical and hdmi are digital
    you can get converters but some would be pricy and could cause delay between image and pictures for video

  • My Apple TV optical audio is not working?  Help!

    I have and HDMI cord going from the Apple TV to the TV and the optical audio from the apple tv to my yamaha reciever - I cannot get any sound out of my speakers - sound is only coming out of the TV.  Any suggestions?

    Welcome to the Apple Community.
    Try switching Dolby digital to off.

  • Connecting apple tv with optical audio cables

    I have a new apple tv and need to connect via dvi to hdmi on my tv. problem is the audio.  I am supposed to connect via option audio but don't know which cables to purchase and where it needs to be connected to FROM apple tv.

    Due to the limited number of HDMI connections on my TV I upgraded my home theater receiver to one with 4 HDMI inputs. I use it for all video and audio switching and the TV stays on one input. Much cleaner cabling as well. An HDMI switch is also an option to look at too. Be aware an automatic switching HDMI switch probably will not work due to the way the ATV sleeps (not sure with the ATV2's). You'll probably need a manual one with push buttons or a remote.
    For the problem at hand, first you need to know what audio input you need with the DVI in on your TV before we can help. To start with you are going to be using optical audio out from the ATV, a Toslink cable out of the ATV to be precise. If your TV's DVI connection matches up to a Toslink digital input that's all you need.
    More than likely it has a single RCA jack which would be a Digital Coax in. In this case you will need a Digital Toslink to Digital Coaxial converter as well as a Digital Coax cable. The Coax cable can be a simple audio cable with RCA jacks.
    If the DVI on the TV matches up with an analog in, usually red and white RCA jacks, you are going a Digital Toslink to an analog L/R stereo converter. And of course the RCA stereo cable.
    MonoPrice.com is a great resource for cheap cables and converter boxes. Link to digital converters http://www.monoprice.com/products/subdepartment.asp?c_id=104&cp_id=10423

Maybe you are looking for