Optical disk drive

I know it has been discussed before, but I've read numerous issues in numerous threads. Short version...any CD/DVD media that I put in won't read it all. It just makes a noise that it's trying to read but won't do it. I end up just ejecting. Anyone have any tips/hints before I take it in for a diagnostics run through. Any help is appreciated! Thanks in advance!

Try an optical drive cleaning disc and see if this helps.
Good luck!

Similar Messages

  • Optical disk drive has started to make a lot of noise

    My PowerBook was opened to inspect a speaker problem. Up until then, the optical disk drive was very silent; when you'd play a CD you could barely hear any noise from or in the drive -- virtually none (excluding the clicking when the disk is inserted and set). But since the time, it was opened, the optical disk drive has become very noisy. When a CD is playing, the drive makes a humming noise plus white noise that is pretty loud and even detracts from the music. The CD itself plays quite perfectly, though.
    The drive is a MATSHITA CD-RW CW-8122.
    What may have happened and can it be fixed, and if so, how?

    I think the optical drive may not be back in its place correctly, flush with the notebook. The irregularity/unevenness is causing the disc to either rub up against something, or the motors/mechanisms inside the optical drive are making noise due to the irregularity.
    I hope that made sense.

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

  • 127 degree celsius temperature optical disk drive, fan blowing at noisy max

    Hello!
    Our mac just got back from repair after nearly one year of use. the reason was a noisy fan. One fan was replaced and the other two cleaned.
    After one day the noise started again. I did some diagnostics and found the temp of the Optical Disk Drive to be 127 degrees celsius, just 5 sec after start-up. In the secs befor it shows zero as a value, and then jumps to 127 and stays there. Other temps show 18-30 degrees directly from start-up and stay there more or less.
    So my theory is: the heat sensor does not work, or the output of the heat sensor is misinterpreted.
    question: does anybody know a similar problem, or better the right solution?
    thanks in advance!
    Marco

    Hello Marco
    in the link below is a similar thread from earlier this week, and after a repair the iMac had the same issue with the Optical Drive Bay and it's fan.
    http://discussions.apple.com/message.jspa?messageID=6026643#6026643
    We have not heard back from the OP, but the issue also seemed to point to a bad or damaged sensor after the repair work.
    I think that who ever did your repair work may have damaged the sensor or failed to diagnose the real problem! Your only course of action is to take it back and give them a chance to make it right. Or try a different Apple Store or Apple Service Center and explain to them what has happened along with your findings in-respect to the sensor!
    Dennis

  • Choosing one of two optical disk drives?

    Dear All,
    I am working with a new Mac Pro, Tiger 10.4.10. I have two optical disk drives. Drive number one is not burning properly and I want to choose drive number two to burn a data disk. How can I choose which drive I want to use through disk utility? iDVD or DVDStudio Pro let me choose the burning drive, but I can't seem to find this option when burning through disk utility. Any help out there?
    Thanks.
    Barbara Smits

    Dear All,
    Thanks for your replies.
    No, disk utility does not recognize either drive unless the drive has a disk in it, but I can't get drive #2 to open unless I open it with a paper clip, etc., etc. Disk Utility only allows me to burn from a disk image, not from a burn folder. Burning through Finder does not give me a drive selection option either, only a burn speed and a nameselection. There must be some way to choose the drive, but nothing seems to come up unless there is a disk already in the drive, and I can't get drive #2 to open.
    Any more help out there????????
    Thanks
    Barbara Smits

  • Having trouble installing Windows 7 on external optical disk drive

    My internal optical drive doesnt work so i ran out and bought and LG external Optical drive. I Reinstalled mac os 10.6 and created a 45gb partition in bootcamp. When i try to install windows, at the gray screen it flashes a folder symbol and a circle with a line through it like it cant find the boot up disk in the external disk drive. The version of windows 7 im using is a burned .iso that i got from my boss so i could work on my laptop, i have tried an official windows 7 disk and that produced the same error. Im really not sure what to do other than go to the apple store and the nearest one is 100 miles away so i preferably dont want to do that. Any help would be appreciated. thanks.

    Sorry, it is not clear to me  if you are trying to install Windows on an external optical drive or what. Read the Bootcamp installation and help manuals http://www.apple.com/support/bootcamp/
    Windows needs to be installed on the internal hard drive drive.
    Also, Bootcamp questions are better posted in the Bootcamp forum where the Bootcamp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

  • Equium A210-1C4 not recognizing optical disk drive

    I have a Equium A210-1C4 which will not recognise the odd.
    The drive has power and spins disks but does not appear as a drive in MY COMPUTER.
    It also is not recognised in the Bios.
    I have updated the Bios and tried to install the firmware but get message that the drive is not found.
    I have tried is in another computer and it works fine.
    Has anyone had similar problems and is there a solution?
    Many thanks

    > I have tried is in another computer and it works fine.
    You have tested optical disc drive in other computer?
    Anyway, if the ODD is not recognized in BIOS Im afraid ODD controller is defective. It is mainboard issue so there is no some kind of easy solution.
    I don't think you can do much about that except to exchange the mainboard.

  • Apple External Optical Disk Drive cannot start

    Installed Win7 64-bit on a 2010 Mac Mini. I plugged in the MacBook Air external optical drive. It accepts a CD, spins up, but doesn't report the drive in Windows Explorer. Device manager shows a error: The device cannot start (Code 10). Aside from this, all other peripherals seem to be working fine.
    I was told at the Apple store that this drive was compatible with the Mac Mini. Any ideas on how to resolve this issue or should I simply return the external drive?
    Thanks.

    This is fixed in Bootcamp 3.2, just released. Optical disk works properly.

  • R400 optical disk drive doesn't turn on

    Hello,
    I have the Modelle R400 running Windows 7 Pro (64 bit) on it.
    The problem is the opticale disk drive is diabled by the energy manager and it dosn't turn on.
    Anybody can help me?

    Hi Reiji,
    Thank you for the reply!
    We wanted to know if the issue with Power Manager setting or with the ODD hardware, if it is working fine after disabling the optical drive option in power manager, then I suggest you to check with updating the Power Manger.
    Uninstall the Power Manager application from control panel – program and feature and restart the system. After restarting download the power manager application from Lenovo support site and install it.
    Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
    http://support.lenovo.com/en_US/downloads/default.page#
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Optical Disk Drive not recognised!

    Hi, having a nightmare problem with my macbook- any help would be much appreciated!
    I'm using a new (late 2010) macbook pro, and today it suddenly forgot it has a disk drive. It's no longer showing up in Disk Utility, and the eject button does nothing (there's a CD in there).
    I was in the middle of burning a CD in iTunes, which crashed. I force quit, restarted, then had to troubleshoot as iTunes wouldn't open- saying I hadn't permission to open the library. I deleted the library file, then started a new one, which solved the iTunes problem and allowed me to open the program. Then I noticed the problem with the disk drive, and nothing I've tried has helped.
    Any ideas?
    Thanks!

    Typical- I've been at this all day and as soon as I post here the problem gets solved.
    For the sake of anyone who finds this and is having the same problem- the strangest solution worked:
    I re-booted, and on startup rapidly pressed the eject button until the CD ejected.
    Now the drive is recognised- phew.
    Weird- I really didn't think button-bashing would prove to be the solution...

  • Problems with the Fixed Optical Disk Drive

    I have a Tecra A4, DVD DOES NOT operate, does not read any DVD or CD-ROM and the computer display following error message indicating: Device is not accessible the request could not be performed because of an I/O device error. Any suggestions? lhidalgoa

    Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
    Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

  • Optical disk drive for Mb Air

    Hi, i would like to buy external optical drive (on usb) for my macbook air (mid 2012).
    Can my macbook accept any external optical drive by other manufacturer such as LG, Asus, or i have to buy Apple's only?

    @themachead
    Hey, and how can i see if some is self-powered?
    I've just watched some video of some optical drive that has two usbs to be inserted and reviewer said it doesn't need external power to run, but i do not get it. I have on each side one usb slot, so i wouldn't be able to insert both of them as that usbs are quite close one to another.
    Is there self-powered device with only one usb?
    @dwb
    Thanks.

  • How do I Turn off my Optical Disc Drive - Satellite: P745-S4217

    I would like to turn off the Optical Disk Drive because the ODD checks for a disc every now and then, very randomly (I can hear and feel the laser tray move around looking for a disc, I can't imagine that it is very good for it to do this so often) and also to save power.
    I have read that some (most) computers have Optical Drive power management options where they can turn ons and turn offs setting but on my computer (Satellite: P745-S4217) there is no option for me to change the "Optical Drive power management" once I get into the TOSHIBA Power Saver Settings - I can only change "Cooling Method"
    Also, I have options when I right-click on the icon in my taskbar...  I can enable "Optical drive auto lock" and then choose between three "Unlock time settings": one, three, or five seconds. But it doesn't change anything.
    Thanks in advance for all your help!

    So have you tried all the tricks posted online? The best one for me is to take a thin piece of plastic like from a salad container. Fold it over and make two "lips". Insert that into the drive and it will help guide the disc out.
    Is your MBP under warranty? Then take it in. Don't void your warranty.
    Otherwise use the iFixIt guide:
    https://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2012
    for the non retina.
    Disconnect the optical drive cable. If it's really stuck and you feel up to it you can take the drive out and and take it apart (guides all over the net) to remove the disc.
    However it sounds like the disc isn't that stuck so any of those tricks should work.

  • Windows 8 Pro, No Disk Drive

    I have installed windows 8 pro onto my mac successfully, however the optical disk drive is not recognized? Works fine on the Mac side of things, but when I boot up Windows there's no signs of any disk drive being there. Anybody know of any way to get the disk drives working or is it literally just to wait for the drivers to be released?

    You Have to run Bootcamp 4 or 5 (640MB) Setup.exe in Windows 8 for device driver installation.
    You can see devices that Windows sees and those it can't figure out in Device Manager.
    You can get to Device Manager by putting cursor in lower left corner of screen, where, when you see Start pop-up with a whole bunch of colours, you right click mouse.

  • Cost of disk drive replacement

    How much is it to replace and optical disk drive on my macbook 2011

    Unless you are going to buy the drive and do it yourself, call/go to your local Apple store or Apple Authorized Service Provider and ask them. 

Maybe you are looking for

  • How do I deal with "Acces Denied" error when trying to print to Adobe PDF printer driver

    Windows 7 64 bit OS (updated) Adobe Acrobat XI (11.0.06.70) I am unable to create a PDF file from within the Windows 7 print dialog.  Each time, I receive a terse "Access Denied" error followed by the display below (the progress bar never advances). 

  • KEY and KEYREFs support on XML DB

    First of all, sorry for my english but I am a spanish researcher who have not been abroad too much :-). I�m trying to use XML DB to store XML documents that represents UML models and the way I've choosed to map relationships in my schema is using KEY

  • Default Order unit

    Hi All, I have a situation where, i am creating a STO requsition and then converting to STO. When i am creating a Stock transfer Purchase requsition the base unit of measure defaults in from the material master as EA. We have left the order unit to b

  • Contact import page is blank.

    When i try to import my Facebook contacts to Skype, the import screen is all white. Using Windows 7x64, using Skype 6.16.0.105. Solved! Go to Solution. Attachments: nimetön.png ‏236 KB

  • CC.2 Update issue

    At the school I work at we were trying to update the Adobe CC apps on all the computer. I signed in with our email and password on each computer to do updates and I came across an issues. Updates for CC.2 were only available for Dreamweaver, Reflow,