Optical Drive Bay Hard Disk Drive Caddy

Hi,
I have an old Compaq Presario v2036AP Notebook PC.
I would like to replace it's optical drive with new Hard Disk. I have tried to find a compatible caddy for the same but was not able to find any
Is there any way I can add another HDD to my laptop?
I do not want to use any external disk.
Also, if possible could anyone help me in identifying that what type of caddy drive I may require (SATA to SATA or PATA to SATA, etc.)
Thanks for your help
Regards,
Ashish Sharma

Definitely upgrade memory to at least 16 GB. Consider upgrading the video card to a 650M. For the rest it looks good, if you can live with a super glossy screen.

Similar Messages

Solid State Drive vs Hard Disk Drive for Audio/Video Processing??

Which hard drive is better for pro tools / final cut? ive read that solid state drives are faster with reads, but only 80% as fast with writes..
im not sure which one will effect pro tools / final cut-- if it will effect it at all?
thanks!

Calvin, I am in the exact same boat. Help us someone...

D20 hard disk drive caddy part number?

I';m trying to order a couple of replacement hard disk drive caddy for my D20 as one has split at the handle and another looks like it is about to go.
Does anyone know what the FRU part number is for these? The part I need is the toolless black plastic carrier for 3.5" hard drives.
Thanks very much!
ThinkStations: D10, D20, and S20
ThinkCentres: S50, M51, A61e
ThinkPads: W520, X60T and X61T SXGA+ tablets
Solved!
Go to Solution.

FRU # 41R5630 should get you one or two. if you still need them, i might have a spare kicking around somewhere.
http://www.ibm.com/shop/us/maintenanceparts or 800-388-7080 options 2:1:1 (unless the menu hierarchy has changed).
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Just bought a Lenovo 3000 N200 without a hard disk drive, need software

I just bought a Lenovo 3000 N200 Type 0769-BLG assembly date 07/09 from e-bay, it looks brand new but it had a fault, it was dead, perhaps a faulty motherboard and the hard disk drive had been removed. Assuming I can get the fault fixed, where can I get the Lenovo software that came with the original hard disk drive, I would prefer a free source, if that is possible, perhaps some kind person has put all of the CD's on to a DVD that I can borrow or buy a copy of. I was an IBM employee for 30 years before retiring 15 years ago. Dan McLean in Scotland, UK.

Call customer service directly to get a quick solution for this.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Intel Xserve will NOT boot from hard disk drive

I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
Tony

Antonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer

Hard Disk Drive Connector for laptop

i need a Hard Disk Drive Connector for the hard drive and caddy, the and part p/n:gs662ua#aba
it a hp pavilian dvdv6500 thanks

Hi:
I would get one on eBay. They have plenty of them...
http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_sop=15&_nkw=dv6500+hard+drive+connector&rt=nc&LH_...

What hard disk drive should I have to buy and maximum what gb I can upgrade to mid 2011 21.5 inc mac?

what hard disk drive should I have to buy and maximum what gb I can upgrade to mid 2011 21.5 inc mac? Also do you think I can replace myself at home or I need to take specialist?

Hi, I take it you mean the Optical drive?
If so, here's a few...
http://eshop.macsales.com/shop/optical-drives/superdrives/

Hard disk drive in CD-RW case

I received a seagate 20Gb hard disk drive from a friend which had been working in his PC which I hought I could connect in to my iMac in an old external cd writer casing. When I power it up though, the mac can't find the drive. Is this because the CD writer casing is not compatible with hard drives or is it possibly something else?
Cheers
Derek

Settings for master, slave, and cable select are changed by re-positioning the small plastic jumper(s) on the drive. Because the exact configuration of the jumpers varies from one brand to another, you should check the hard drive's manufacturer's web site for specific information.
An additional problem may concern the external case and the bridge chipset used in it. Was this a USB 1.1 CD-RW device? I once had an old Sony Spressa USB 1.1 CD-RW drive and installed a Zip drive in the case, after the CD-RW failed. Even with Iomega's Zip USB driver installed (with the Apple USB Support drivers), the Zip drive would choke when attempting to read anything but a small file on a disk. Attempts to write to a Zip disk, triggered a couple of error messages referring to missing (but necessary) "software." Essentially, the errors pertained to firmware in the ATAPI-to-USB bridge that didn't support the use of a "mass storage device," because it was programmed for an optical removable media device.

DV9925nr - How to Backup Hard Disk Drive After S.M.A.R.T. Drive Failure Message

I purchased a DV9925nr laptop from Bestbuy about 13 months ago. Six months ago it started having the sporadic and randomly abrubt shutdown problem that so many others seem to be having.
Two days ago it developed a new problem:
I left my laptop on for a few minutes and when I returned, it was to a black screen with this message: "SMART Drive failure predicted on Hard Disk 4. WDC WD2500BEVS - 60UST0-(S1); warning: Immediately backup your data and replace your hard disk drive. A failure may be imminent. Press F1 to continue."
My question:
We have a network with two laptops and a desktop computer. There is plenty of hard drive space on the desktop system. My father has the same exact laptop model as mine. Can I put my hard disk drive into his second disk drive bay so that I can backup my files over the network to my desktop system? How would the laptop know which hard drive to boot from since they both have the same operating system on them (I am not familiar with SATA drives)?
I hope I didn't buy a lemon. Any help would be greatly appreciated.

Are you trying to do this while booted from the OS or from the install Disk? If your booted into the OS then the repair option shouldn't be click-able. Beyond that, there might be some 3rd party software that could force a reformat and/or erase. I did try to find you something but didn't come across anything specific to what your trying to do. You probably already know this, but the purpose of S.M.A.R.T. is it acts as an early warning indicator. This means the drive is no longer dependable and may fail without warning in the near future, resulting in losing all data. With that being said, I've used a hard drive that S.M.A.R.T. indicated was failing for 3+ years without a hick-up. I don't use it for anything imported though. When I have more time and if I come across anything that might get the job down, I will add to this posting. The worst case scenario is that there is no way to reformat and/or erase the drive due to the state it's in. At that point, the only thing left to do is recycling the drive.

Comparison of SSD with hard disk drives

Attribute or characteristic
Solid-state drive
Hard disk drive
Spin-up time
Instantaneous.
May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
Random access time[45]
About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
Read latency time[46]
Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
Generally high since the mechanical components require additional time to get aligned
Consistent read performance[48]
Read performance does not change based on where data is stored on an SSD
If data is written in a fragmented way, reading back the data will have varying response times
Defragmentation
SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
Acoustic levels
SSDs have no moving parts and make no sound
HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
Mechanical reliability
A lack of moving parts virtually eliminates mechanical breakdowns
HDDs have many moving parts that are all subject to failure over time
Susceptibility toenvironmental factors[47][52][53]
No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
Magneticsusceptibility[citation needed]
No impact on flash memory
Magnets or magnetic surges can alter data on the media
Weight and size[52]
The weight of flash memory and the circuit board material are very light compared to HDDs
Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
Parallel operation[citation needed]
Some flash controllers can have multiple flash chips reading and writing different data simultaneously
HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
Write longevity
Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
Magnetic media do not have a limited number of writes.
Software encryption limitations
NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
HDDs can overwrite data directly on the drive in any particular sector.
Cost
As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
Storage capacity
As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
As of October 2010, HDDs are typically 2-3TB or less
Read/write performance symmetry
Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
HDDs generally have symmetrical read and write speeds
Free block availability andTRIM
SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
Power consumption
High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

I wish I could get my head round the SSD vs HDD with a NLE rig. My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS. That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.
The rest of the new build is
3930K
Gigabyte X79-UD5
8 x DDR3 1600
Coolermaster with 750W PSU
Geforce GTX570
I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use. That means
Either the above SSD or 450Gb 10k Raptor for OS (new drives)
300Gb 10k rpm Raptor (currently used for OS in old box)
150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
2 x 1Tb WD Blacks (data drives)
2 x 1Tb WD USB3 externals
I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice. It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over! And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor? I have read a comment that the WD Blacks don't work well as Raid0. Is that BS or true?
I am about to give the go-ahead so need to confirm the spec.

I can't copy my itunes library to an external hard disk drive!!

this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

Satellite M30X - high hard disk drive utilization

After login in Windows XP (SP2), my toshiba laptop is very slow. The hard disk drive light is continuously on for 5 minutes. I've looked at the task manager, but CPU utilization is low and RAM usage is low. There is no program that seems to use a lot of CPU or RAM.
I've actually turned off the paging file to see if the problems due to intensive use of the paging file on the HDD, but problem persists. The model of the laptop is Satellite M30X-113.
I don't know if it's related, but this problem arose around the time that I've taken out a 256 MB RAM module and installed a 512 MB one (making the total ram memory 1024 MB).

Hi
> I don't know if it's related, but this problem arose around the time that I've taken out a 256 MB RAM module and installed a 512 MB one (making the total ram memory 1024 MB).
If this issue has begun after installation of the new memory module then I would say that the new memory module is responsible for this issue.
You could also try to put back the 256MB module to check if the issue still persist.
This would be the easiest way for checking

Can I upgrade MacBook Pro hard disk drive next year?

Hi there! I'm new to the Apple Support Communities!
I am going to buy a new 13" MacBook Pro, 2.5GHz. I am going to buy the base model, with a 500GB 5400 RPM hard disk drive. Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year. So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
Here are the issues:
1) I don't know how I would make it so I could boot from an external USB.
2) And I don't know how to get all my personal information from one drive to the other.
For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup. But Time Machine couldn't back up the whole OS, right? And what would the procedure be anyway? Just turn it on when I'm done the upgrade?
If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
Thanks,
Solid-State Me 

Yes you can replace the hard drive at any time. Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure. Then download a program called "super duper" and follow the instructions to use that software. When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish. What it's doing is copying your drive onto the new drive. Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure. Now you have an external hard drive that is repurposed instead of throwing it away. Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs. After that, use the drive to store files, backup the internal, transfer stuff, whatever.

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Optical Drive Bay Hard Disk Drive Caddy

Similar Messages

Maybe you are looking for