Optical drive not showing up on satellite L75-b after ssd drive install
I just installed an ssd drive in my satilite L75-B7150. I had to unscrew the locking screw on the opticol drive and slide it out. Now it wont show up in this PC windows 8.1. it does have power and the light led comes on a while with a disk in it but then goes out. It seems to be plugged in ok but im hessitant to take the back all off again.Could it be a driver problem? there doesnt seem to be any spacific drivers for it.
Richard,
You do have a failure of the backside L2 cache, a common problem on the Lombard. This memory is soldered to the microprocessor card and the only fix is a replacement card.
http://docs.info.apple.com/article.html?artnum=51159
I don't know if the failed L2 cache memory would cause a problem with the HD on the internal IDE bus controller; it apparently does not via the USB bus.
Generally, users who have the failed L2 cache do not have a successful startup unless they reset the power manager. Try this: With the Lombard turned off, reset the power manager and see if it will start up to the internal HD. If no success, shut down, insert your OS 9.2 CD, reset the power manager, and see if the HD appears on the desktop after booting to the CD.
Similar Messages
-
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
HT201401 My pictures are not showing up in my camera roll after I take them, where are they going?
My photos are not showing up in my photo stream after I take them, what could be wrong? Brand new phone, camera is working, older photos from cloud are there but not new ones that I am taking.
Reset the iPhone then take a photo. See if it shows up in the camra roll.
If not, reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then try a photo.
Message was edited by: CS -
Make the emails do not show in the ipad or iPhone after i read them in my macbook air
make the emails do not show in the ipad or iPhone after i read them in my macbook air
Assuming you're using Apple's Mail on your Mac, go to your Mac's mail Preferences (from Mail on the menu bar).
Click Accounts on top, then click your email account on the left.
Then click Advanced on the top.
Check "remove copy from server after retrieving a message" and set the line below it to "immediately".
That will do it. -
Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.
See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190 -
I am not able to restore my iphone 4 after trying to install the new softwear. I tried every single possible way. What can I do?
There are two ways that a backup can become encrypted:
You chose to encrypt it, then forgot the password.
If you have company-provided MS Exchange access your IT department has the option of requiring your backup to be encrypted. The first time you backed up or synced after installing MS Exchange you were prompted for a password. That is the password you need.
If you don't have the password any longer there is no way to restore the backup. -
Music not showing up in my Music Library after moving to another drive
My C: drive was full, so I moved the file to my F: drive (have done this before, but somehow it only copied it and reverted to the old location on C).
I found multiple iTunes folders throughout my many drives and got rid of all but the ones on the F: drive. It now shows multiple folders with all my songs on F: drive. However, they do not show up in my Music Library. I've tried the preferences \advanced \general \copy music to library trick and still nothing. Don't think I lost the music since I have all these folders (1 for each artist) and it looks like a lot of bytes.
Please help..
Alternatively, I'd like to know how to get the whole library on my laptop and off of this old computer that ran out of space. The F: drive is detachable.
Thank you in advanceDo you use iTunes Match? Others have complained that it can take some time (overnight?) for items to appear in their library because of Match activities.
Can you play a file with Quicktime Player? Is it complete?
Delete an item from the library but not the actual file. Add the file again. -
"No bootable device ..." Trying install Windows (Flashdrive + Optical drive install)
I tried to install Windows 8 64-bit and Windows 7 64-bit on a seperat partition on My MacBook Pro 2011 15" using Boot Camp-assistant on Mountain Lion.
I got some errors like when rebooting and trying to enter the install-disk it says: "No bootable device ..."
I have already tried solutions with different flashdrives it did not work for me. I also tried with a optical drive - Windows 7 DVD install-disk - which also did not work for me.
It has worked for me before some time ago but that time I had Lion or SnowLeorpard on my Mac.
I don't know if there is a bug or something like that in the new OS - Mountain Lion?
Thanks.
For more details about my error go to: Mac How To : Bootcamp Windows Partition ProblemI found the SOLUTION to my problem on this post:
https://discussions.apple.com/message/15940863#15940863
The problem is that you have to use a certain DVD-drive(dual layer) to install/boot Windows and since my MacBook Pro's internal DVD-drive does not work I have used an external DVD-drive which is much likely causing the problem. Therefore the only solution (in my case) is to use a proper DVD-drive(from Apple) or repair the internal drive.
See also this post:
http://forum.notebookreview.com/apple-mac-os-x/707240-boot-camp-assistant-proble m-windows-partition-mountain-lion.html#post9069614 -
Paid apps do not show up on my iphone 3 after restore
after i restored my iphone 3g the paid apps don't show up on the screen
however, itunes and the app store say that they are downloaded
also, in the iphone setting it shows settings for beejive and facebook
they just seem to not show up, as if minimized:SRestore them from the app store. When you do this it will tell you that you have already purchased this app and do you want to reinstall it. Just say yes.
-
After upgrading my iphone 4S to 5.1.1 I had a problem... woke up one morning and my phone was DEAD! It was completely non responsive, not showing up in iTunes, not charging from my Mophie, or A/C or Mac.
I wanted to post the fix that worked for me in case anyone else out there is having the same heart pulpitations I was this morning. In the online communities Parisilia had posted a fix to do a hard reset (Hold down the home button and power button simultaneously for several seconds, the phone will reboot and will then be recognized in iTunes and you can restore from backup). This worked for me - PHEW!! Off the ledge...
Once my phone rebooted it didn't actually need a restore because it hadn't 'reset' - everything was as it was the night before, although the battery had gone from 51% to 41% Personally I'm shocked that it would drain 10% in one night and who knows how long it was 'dead' for after I put it to bed at 11:45pm????!!
This is my second iPhone 4S since Oct 2011 - the first one had to be replaced because of something radically wrong with the battery capability. After several very frustrating months of trying various fixes Apple finally took the phone back thinking it musta been a dud. I've had this one for about 3 months and it's been much better battery-wise, but now the mysterious DOA event has me seriously worried that I have another dud. Looking thru the communities there seem to be many more people experiencing the same issue, so hopefully it's software and can be fixed (APPLE ARE YOU LISTENING??) rather than me being up the creek again.
Good luck to anyone else experiencing the same issue.Try
1. Totally remove iTunes and QuickTime
see
http://support.apple.com/kb/HT1926
2. then you will need to do a "deep clean" of registry
by this I mean a registry search for itunes and delete any and every key you find
*however if you do not know how to do this safely don't try it*
unfortunately the registry cleaners do not clean to this level
and itunes leaves considerable detritus in the registry which can screw up updates and or reinstalls
Apple needs a cleaner similar to Norton's effort which has similar problems. Their tool removes ALL evidence of a previous anti virus installation which is what the above solution achieves in iTunes -
Shared tab in left menu column does not show on one of the computers after setting up Home Sharing
For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers. The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer). The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2. My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2. Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column? Any help would be most appreciated. Thank you.
Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
Thanks again for all the help.
HP Pavilion, Dell Optiplex Windows XP -
Some Site Collection not showing up (even the system pages) after upgrade
Hi All -
Following http://technet.microsoft.com/en-us/library/cc263299.aspx I just did database upgrade from 2010 to 2013. Some of the site collections are not showing up. These are basic site collection with almost no custom code. Just bunch of list and libraries.
Not even the system pages such as web part gallery, masterpage setting page none are opening. I check the Correlation ID and the log file is showing the below error
Name=Request (GET:http://<siteurl>/_Layouts/ChangeSiteMasterPage.aspx) 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.80 w3wp.exe (0x1858) 0x198C SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True,
UserIdentityName=, ClaimsCount=0 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.81 w3wp.exe (0x1858) 0x198C SharePoint Foundation Logging Correlation Data xmnv Medium Site=/sites/WK-Advisors 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83
w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite,
Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr,
SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl,
Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String&
pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... 5bb6669c-24a6-70d4-9fcd-23851c953ba2
01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte&
piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint
Foundation Files 00000 High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid&
pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden,
Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation
Files 00000 High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object&
oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest,
String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl,
String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...String&
siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path,
Boolean throwIfFileNotFound) at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) at
System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResultWithN...
5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...oAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean</siteurl>
According to this article, I need to verify whether sites are working in 2010 mode. Next step is to change the authentication. Should I proceed to change the authentication mode before resolving this issue?
<siteurl></siteurl>
<siteurl>Regards,</siteurl>
<siteurl>Khushi
</siteurl>
<siteurl></siteurl>
KhushiHi
Khushi ,
Yes , you need to proceed to change the authentication mode . According to your error message “Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0” and “UserAgent not available, file
operations may not be optimized”, all of them can be caused by the authenticate. So make sure you have upgraded cleanly and effectively to Claims Based Authentication.
For more detail information, you can refer to the article:
Migrate from classic-mode to claims-based authentication in SharePoint 2013
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Exception is not showing in transformation step in BPM after activating
Hi ,
I want to cancel the process if any mapping error occur in transformation step for that I designed by below steps.
1.Block step ( mentioned exeption)
2. transformation step ( Inside block mentioned block step exception)
3. exception branc inside block
4. contorl step (Cancel process inside exception branch)
after activating the BPM , in transformation step exception is not showing .
How to resolve this issue how
Please help me
Regards2. transformation step ( Inside block mentioned block step exception)
Did you define the Exception Handler properly and also used the same in the Exception Branch? If you do a check in IR for your BPM (F7) do you get any error/ warning messages?
Regards,
Abhishek. -
Lightroom CC not showing up in my creative cloud after repeated log out and log in's
tried updating to the latest lightroom, but creative cloud not showing Lightroom CC even after repeated log outs and log back in's. Showed up first time on another machine of mine but not my main desktop machine.
Hi Sandeep,
I just signed up for a 30 day trial and I'm really excited to use the software for movie editing, however I just saw this post after I was trying to use Premiere Pro and sadly I don't have a machine with 64 Bit OS. I was just seeing if there is any way I can cancel my free trial and then start it back up after I get a new computer. I'm really excited about using Premier Pro but want to make sure I can try it out with a film project before purchasing and I don't know how long it will take to get a new computer.
thanks! -
Safari Not Showing Web Address in Address Bar after Lion Update
Sometimes the address bar is blank (save the "Go to this address" message.) Other times, it reads only the hompage address for a site I visit. For example, if I'm reading CNN.com, it will only show "www.cnn.com" no matter what page within cnn.com I go. So, for example, if I want to copy the address of a certain article, I cannot copy it from the address bar as that will only give me "http://www.cnn.com."
Other times, if I visit cnn.com, for example, and then create a new tab and go to apple.com, the new tab will not show apple's web address, but remain as cnn.com's address. If I decide I need to reload apple's website, it will reload CNN's as that is what's in the address bar.
Does anyone have a fix to this?this happened to me too. for one reason or another, the url address disappeared and i kept getting "go to this address". but found this to work:
1. minimize your screen
2. under the "view" menu, click "show toolbar".
3. when you maximize your screen, the url address should now be there.
hope it works.
Maybe you are looking for
-
How do you view a photo at 100% size like you can do in Photoshop? The zoom slider is cool but it does not give you any info as to what magnification size the image is at. Can anyone help? Thanks, Martin.
-
Warning popup when raising a sale order
Hi I have a reqt, where in when raising a sale order, the user will enter the Price manually, the PR00 has to compare with the VPRS of the material master & if the sale price is less than the cost, a pop up should appear on the sale order screen (War
-
How to get undo datafile number without opening the database ?
I cannot open the database because the my undotbs01.dbf file is corrupted : SQL> connect sys/... as sysdba Connected to an idle instance. SQL> startup mount; ORACLE instance started. SQL> alter database open; alter database open ERROR at line 1: ORA-
-
DAQCard 1200 / SC-2043-SG - Other Analogue Sensor Inputs?
Hello! I am relatively new to these things, so sorry for any ignorance I have a self designed servo-hydraulic structural test rig with a load cell and displacement sensor on the hydraulic cylinder. Signals from both these sensors are inputted via a C
-
How to look what TIME I accessed a website?
I want to check what time I watched a movie last week. I know how to check the days on the history bar. But I want to know the specific time. Is that possible? P.S I have the firefox 31 version