Optical Drive reads some DVD's, but also ejects some - help

I just had a DVD made from an old video tape, put it in my MBP superdrive, it played just fine. I left it in the drive and the next morning when I woke up the computer, the DVD spun and then ejected. Since then it won't load at all. I've tried other DVD's, some work, some don't. The DVD plays just fine in my old iBook. In Disk Utility, I did the repair permissions, that didn't work. I have restarted, shut down and even reset the SMC, the DVD still won't play. My drive info: Model:HL-DT-ST DVDRW GSA-S10N, Revision: AP09. This sort of thing has happened before with this drive. Any suggestions?

I've had similar problems with my original MBP early 2006's DVD drive, but a good squirt of compressed air in the slot seems to consistently fix the problem. A lot of dust here in AZ where I live
Hope that's all it is...-Karen-

Similar Messages

  • My DVD drive reads some DVD's but not all.  Help

    I am trying to install all of my graphics programs (Adobe, Quark, Suitcase). It will only read one of my dvd's and not any of the others. The disks show up when I put them in my drive on my other mac. What is going on?
    Thanks.

    Welcome ot Apple Discussions!
    Since a Powermac G5 can't run 10.6, we are kind of mystified what your computer consists of. But I will say this much. If these are commercial DVDs, chances are the drive has gotten dirty, and needs a proper head cleaning. Ask a local authorized service technician to recommend one for you.

  • EMac optical drive: Reads but ceased writing.  I get "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR.  Drive is Pioneer DVD-RW DVR-127D.

    eMac optical drive: reads fine but has ceased writing.  One day it's working fine, burning DVDs, then after repeated attempts stops copying and gives the following error message:  "Sense key=MEDIUM ERROR, Sense Code=0x0C, WRITE ERROR".  Drive is Pioneer DVD-RW DVR-127D.  Is this a software issue or is the drive half dead?  Get the same result with either Popcorn or Toast 10.

    Are you using Roxio Toast? That error seems to be discussed a lot in the Roxio forums. Scroll down this thread:
    http://forums.support.roxio.com/topic/1686-the-drive-reported-an-error-sense-key medium-error-etc/
    and you'll find a step-by-step troubleshooting scheme.

  • Optical Drive not burning DVD's

    I keep posting a similar discussion but nothing is working. I have this ASUS optical drive for burning DVDs. I was told it doesn't need to be installed because you only need to install it if it's windows. I've tried burning through the disc utility and through creating a new file and clicking burn "so and so" to a disc. After the burning is completed and I try putting it in a DVD player, it says "Unknown Disc" so I'm doing something wrong along the way.
    The ASUS optical drive is Mac compatiable so that shouldn't be the problem.

    Do you get this error message with all current burn attempts, or simply with your most recent project?
    If not, a PRAM reset has been known to be helpful.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Release the keys.

  • My optical drive reads DVD's, but wont read or write anything else!

    Hi, this is my puzzlement,
    the optical drive on my 17mpb will read and play any DVD I put in just fine, but when it comes to everything else it will not read or write. The drive whirrs around and then spits the media back out. Help!

    See if a disk cleaner DVD or a few shots of compressed air will cure your problem.
    Ciao.

  • IMac internal optical drive reads and plays cd's but DVD's spin for a few moments then eject. Then any drive utility access results in the spinning wheel of doom. Then the optical drive doesn't show up anywhere until a restart. OSX 10.6.8 - Intel Core 2

    iMac internal drive locks up after trying to play a DVD. CD's work properly. All preference settings are correct. I have tried several different DVD's that work in other drives. Drive is : HL-DT-ST DVDRW GA11N. After spinning wheel of doom goes away, so does the optical drive in Disk Utility and System Profiler and no disks work because the drive isn't there until a restsrt. Any ideas? Thanks.

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

  • CD/DVD Optical drive appears and then disappears, replacement also does not show up

    My laptop: HP Pavilion dv9601AU
    I have read a similar post here but my problem is different. My problem is that the DVD drive *sometimes* show up in My Computer and *sometimes* dont. Even the BIOS does not detect it.  When I formatted my laptop with Windows 7, to my surprise it was gone. But it appeared again and I somehow installed all the required drivers from my driver DVD.... then it dissapered again. It never came back.
    Failed attempt 1: I tried to re-format the PC using virtual drive but the problem persists.
    Failed attempt 2: Thinking it to be a physical loose connection, I took it to local HP service station, they removed the drive, put it back firmly, but in vain.
    Failed attempt 3: They attached other similar optical drive but to my surprise, the new drive was also not detected.
    Failed attempt 4: I tried Microsoft's "Fix It" thing and also read about removing "upper filters" and "lower filters" in registry. However, I didnt have any of those filters entry in the first place so no question about making changes to the registry.
    Facts:
    1) The drivers are installed. There should not be any problem with the drivers.
    2) The lens is perfect. I was able to install all the drivers from DVD when the drive appeared for a short period of time.
    3) The HP logo tht appears upon starting the laptop lingers for a longer period of time compared to what it was doing so when the drive was fine.
    4) The boot menu does not show the optical drive.
    5) I live in India where normal room temperatures go upto 42 degrees Celcius and my laptop gets much much warm most of the times. I think some damage has been done to the internal circuitry.
    Please, if somebody can provide me a solution to this. How can I get back my DVD Drive working. The support personnel here are having no clue (especially after learning the fact that their new optical drive also didnt show up) I hope I get some guidance from you guys as what should I do next. Please help me.
    Message Edited by jal_desai on 10-09-2009 06:51 AM

    I am having the exact same problem with my customer's dvd drive sometimes showing up during boot (BIOS) and sometimes not. Also ran full system diagnostic software and everything else tests fine, although the drive is not showing present. I have also tried 2 different drives but they do the same thing. I would go on to say that if you always left the dvd drive out of the laptop, your boot problems would probably go away. This would then tell you that it's not your drive at all, but the connections on the MOBO or the traces (wires) connecting the drive to the MOBO.
    I work on computers and have for several years and most times this is related to a MOBO issue since that is the only item left in this situation. You know it's not the drive since it's been replaced with the same issue so drivers/firmware are not the case. I am assuming you have already updated the BIOS as well,  but this shouldn't matter. There could be a dirty contact, faulty component, or a bad trace (wire) on the MOBO which is almost always harder to fix and is better to just replace the MOBO. However, replacing the MOBO is usually expensive when you have to buy the part and then pay someone to install it making it not usually the best option. Even if it is a dirty contact, it was probably caused by something that was spilled which could cause problems later. In this case, I am probably just going to recommend disabling the internal dvd drive and buying a slim external usb dvd drive, and then saving their money for a new laptop. You will still have to wait through a slower boot while staring at the HP screen, but I don't think replacing the MOBO is the most economical thing to do, unless you are the manufacturer and have several laying around.
    I know this isn't good news, but it is what I've found to be the case in my experiences. Anybody else care to chime in?

  • Optical drives reads but wont write after swap

    hello everyone, I bought an iMac G3 450MHz that had had a 'superdrive' fitted. It both read and wrote CD's and DVDs. I tested it out and it worked just fine, I even made a back up copy of my Tiger DVD with it. I wanted to put the optical drive into my beloved Flower Power 600 iMac CD-RW so ,to make sure all the drive cables etc weren't disturbed, I just removed the whole caddy with the HDD plus the optical drive plus all the connecting cables, and popped it into my Flower Power. It booted up fine so I loaded (via carbon copy cloner) the contents of my original HDD. Now, when I look in system profiler, the optical drive shows up as a read/write but will only read discs. If I put in a blank disc the iMac's OS doesn't see the blank disc. Funnily enough my copy of Toast does see it and Toast launches itself. As I want to be able to burn disc images using Disk Utility this is a bit of a problem for me. I might just add, as it may be of some interest, that whoever fitted the superdrive had the HDD jumpers set to Slave but this was how it was when it worked perfectly in the 450MHz it came in so this was how I left them. The other little problem is the iMac won't sleep but I can live with that.

    The reason your hard drive is set to slave is because it shares the IDE bus with the optical drive. With the stock optical drive, the optical drive is set to slave and the hard drive is set to master. However, that superdrive is probably hardwired to master, so the hard drive needs to be slave. As long as one drive is slave and the other drive is master, it should work fine.
    Are you using the exact same system installation from the 450 on the 600? If not, there was probably some special driver installed to enable the all the superdrive features. Toast is a third-party app that is designed to work with many different optical drives, so such a driver would be built into the software, which would explain why it works (and Disk Utility does not).
    What company sold (and installed) this superdrive?

  • CD-RW/DVD-ROM drives reads and imports discs, but won't burn CD's

    I'm working on my laptop and I can import material from discs, but I can't burn anything to CD. I've tried iTunes and buring from the finder and iPhoto and nothing works. I've tried iTunes the most and here is what usually happens: the disc begins to write and then partway through it gets spit out (after some thumping or whirring noise of some sort) and it says the disc is unusable or unreadable. I've tried several different kinds of discs and none of them work. I've also tried those discs on my G5 and they burn perfectly. On the rare occassion that a disc from iTunes burns all the way through, it ends up sounding really weird... kind of warbly I would said. Any help?

    The best method for cleaning an optical drive that I know of is to purchase an optical drive lens cleaner (its a special disc that you insert into the drive and follow the instructions) at your local computer supply store.
    One article I saw talks about lasers in optical drives just flat out dying over time -- but this doesn't sound like your situation since you can play, just not record, though maybe it's something to think about since you have had your 'Book for a while.
    Finally, take a look at this Kbase article: http://docs.info.apple.com/article.html?artnum=151900 It seems to suggest (albeit under OS X 10.3.x, but I doubt that matters) that the inability to record on an otherwise operable optical drive lies with the disc being dirty or not the type or brand suitable for your drive. I can't say I agree, totally, with that analysis, but I thought you ought to be aware it's out there.
    Try the lens cleaner. Here's an example of what I'm talking about. There are many others.
    Good luck.
    -- JDee

  • DVD/CD drive read/writes DVD, reads CD, but suddenly fails to recognize CDr

    I'm having a problem that I just don't understand, and I can't seem to find any information on, so I'm hoping somebody out there has some thoughts.
    I have a powerbook 17 with the DVD/CD listed below (from system profiler).
    This drive has always worked perfectly, but now I find that I can:
    - play DVDs
    - burn DVDs
    - play/read CD
    but when I insert a CDr to burn, the icon never shows up on the desktop. Running disk utility lists it as a CD (read only) -- I'm not sure if disk utility is valid in this context or not, but I had to start it so that I could get at the CD to eject it.
    At first I thought it might be the media I was using, but I tried two different kinds -- both failed, then I found some blanks of the brand and type that I've been using forever...failure.
    So, can this be a hardware error? If so, how can a hardware drive error only affect recognizing writeable CDs? If this is the case, I'd like to learn something! =:-)
    The only thing that's changed on this system is that I regularly run software updtate...everything's up to date. This is OSX 10.3.9.
    Thanks,
    keith
    MATSHITA DVD-R UJ-816:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-816
    Revision: DXJ3
    Serial Number:
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal

    Keith, just for grins, go to your Apple and click it and then choose System Preferences, and when it opens choose CD-DVD and see what option you have checked for the different media.
    Just a chance when you did an update it might have changed a default setting you had.
    Don

  • New iMac ~ optical drive really heats dvd media - normal?

    Brand new iMac and DVDs come out of the drive very hot. Is this "normal" for an iMac? If this is normal, as in not indicating a potential hardware issue, then wouldn't this kind of heat at minimum degrade my media, if not immediately, then over time?
    I am not finding many complaints about this via Google, so am wondering whether it is specific to my machine as opposed to the model itself. I am very concerned as years ago I bought an iMac which got downright smokey. Fortunately, Apple Store let me switch it out to another model as I had owned it less than two months. I thought Apple had resolved internal heat issues in the iMac. Don't want to go to a "too-hot" internal temp issue again; can't count on being saved by a machine switch later. If heating of dvd media is not known to be problematic of current Intel iMacs, am thinking I should try to get an exchange before short return period expires.
    If this isn't correct forum for my question, please let me know and I'll repost. Thanks.

    FWIW, to close out my query, the question has not been explicitly answered, but close enough. I returned the iMac to local Apple Store, well within the 14-day return period. I didn't want an exchange; I wanted a flat return and refund. After taking the iMac off to check for problems on the optical drive (which would determine whether I would have to pay the 10% open-box fee), the salesclerk soon returned to say I would not have to pay the fee. They also refunded the cost of the add-on ram I had them install at purchase (which he noted they don't usually do). A good-will gesture, I suppose. Works for me! Relieved to be getting a full refund, I didn't ask what they did or did not find wrong. While I haven't had success with either of my iMac buys, I can say the local Apple Store always does right by me.

  • Optical drive scratching new dvd's

    I bought my macbook (black) back in June while on vacation and was able to watch a dvd on it in the airport on the way home. When I got home and watched another dvd I noticed it was scratched after watching it. I wasn't sure if it was already scratched or not, so I put in a new dvd and the macbook scratched it to the point it wasn't able to be read anymore. I took it in and they replaced the drive. Since then I have had another two disks get scratched, both of them new. I took it back in and had the drive replaced yet again. I just started watching another new movie and I heard a funny noise so I ejected the dvd. Again it was scratching the disk. I don't understand why this is happening. Any suggestions? (Yes I know I am a slow learner, but I keep hoping that a product this expensive won't eat dvd's.)
    I don't know how many times apple is willing to replace an optical drive. Like I said, this is the third drive I am on. I have had my computer in the shop more than I have been able to use it!
    black macbook   Mac OS X (10.4.8)   2 GHz intel core duo, 512 MB 667 MHz DDR2 SDRAM
      Windows XP  

    I have heard that moving the laptop will make the scratching worse. I could accept that as the cause if I was actually moving the computer when it scratches the disks, but that has not been the case when mine have been scratched. I don't understand why it scratches in the first place. Cars have cd and dvd players in them all the time and they don't seem to have those problems.

  • Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

    My partner and I are completely unable to install Windows using Bootcamp.  We have tried dozens of solutions on the internet.
    2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank.  We have (hilariously) another Mac, an MBP, that has the same exact problem.  You'd almost think "Superdrives" eventually just stop working or something.  So obviously we can't install Bootcamp on the iMac using a DVD.
    But what about a USB stick?  Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error. 
    So our iMac can't boot from USB drives or read DVDs.  We've only owned it for two years.  And this is the second Mac we've owned where the Superdrive has died.  And we don't even use DVDs more than like once a year.
    But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year?  Maybe a way to make our mac boot from our USB stick?  Something?
    Thanks.

     Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
     What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

  • External Drive Reads Burned DVDs

    I replaced the original drive with a Pioneer that lasted about 1 year, sent it in for repair and got a sony. It does the same thing as the pioneer, burns but won't read dvds. Tried serveral brands of dvds, no change. It reads commercial dvds and cds cdrs ok. So I took the pioneer when it came back from service and hooked it up to a usb case and it will read the burned dvds.?! I guess you need an external dvd reader......
    Steve

    Several of us create a disk image, burn a DVD, and move the disk image (.img) to an external HD for future use.
    Don't count on any recordable DVD to be good "down the road." Well, maybe Verbatim's Archival Grade DVD.
    BTW, If I'm doing movies, I export the edited version back to MiniDV tape. That's the best backup.

  • How to make Combo drive read DL DVDs?

    As you see the question in Subject.
    Thanks in advance,
    Ivan

    The combo drive in my first eMac (700 MHz) couldn't read DL DVDs either. It could read the first layer but skipped and got hung up when it got to the 2nd layer. A trip to an Apple Store and a call to tech support revealed that the drive in question was never intended to support DL, and well, too bad.
    The point is, if your friend's drive is old enough, it simply may not support DL, and no amount of software finagling will make that capability appear in the hardware. Your only options are replacing the drive or adding one via FireWire, (or USB2 if the machine supports it).
    eMac 1.42GHz   Mac OS X (10.4.7)  

Maybe you are looking for