Optical flow analysis for clip failed due to an I/O error

What on earth does this mean and how do I remedy it?

Your clip was probably too big and the cache file filled your hard drive. What codec was the clip, and what duration (total, not just in and out points, Motion analyzes the entire underlying media file).

Similar Messages

  • Adf mobile - Deployment failed due to one or more errors returned by 'osascript'

    I had the mac jdeveoper deploying a mobile app in ios emulator file running fine.
    I had to update the xcode to xcode5 to get the certificate - now the deployment to emulator won't work.
    These are the error messages
    [02:34:41 PM] Command-line execution succeeded.
    [02:34:41 PM] Command-line executed: [osascript, -e, tell application "iPhone Simulator" to activate]
    [02:34:41 PM] Command-line execution failed (Return code: 1)
    [02:34:41 PM] Deployment cancelled.
    [02:34:41 PM] ----  Deployment incomplete  ----.
    [02:34:41 PM] Failed deploying to the iOS simulator.
    [02:34:41 PM] Deployment failed due to one or more errors returned by 'osascript'.  The following is a summary of the returned error(s):
    Command-line execution failed (Return code: 1)

    I deleted xcode 5 and installed xcode 4.6.3. Simulator works ok for 6.1 simulator target version.
    In jdeveloper ios option only 6.1 shows up for simulator target version?
    How do I get the 7 to show up there please?
    If simulator will not show up - can I still deploy / test it in iphone with ios7?

  • I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with d

    I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome

    Export the photos to a desktop folder, right click on the folder and burn to disk - see if that is any different
    LN

  • Compilation failed due to a compile server error

    I was using LABView 8.0 with RT and FPGA module without problems.
    I updated windows on 2006 April 18th and now I cannot compile any FPGA VI. Even the older one I compiled with the same computer previously.
    When I take EXACTLY the same project to another computer, it compiles just fine and when I take the bitfile back, my corrupted system can run with the bitfile.
    I fear the problem is with windows. I reinstalled LABView TOTALLY and still have the same error when trying to compile.
    According to the knowledge base I checked the HKEY and it doesn't change anything.
    Here is the error message:
    Status : compilation failed due to a Compile Server error
    Error -61499 occured at nirviExtractVHDLHierarchy.vi when called from nirviBuildprjFile.vi
    Possible reason(s)
    LABView FPGA : An internal software error in ALBView FPGA Module has occured. Please contact NI support
    Details : Error 7 occured at Open File reading C : \ NIFPGA80\srvrtmp\localhost\Eight...name of the bitfile ...\scripts\toplevel_gen_synth_lvfpga.txt
    Note : I checked this folder, it doesn't exist, thus it has never been created like the previous. After April 18th, not any new folder has been created.
    Possible reasons : File moved or deleted, incorrect filepath,...
    NI-488 : Non-existent board
    Note : I have nor use none of this nowhere !
    Start  time - Stop time : 12 seconds

    In order to try and isolate the problem can you perform a few tests.
    1)  Set up a remote compile and use the machine that is not working as the client and the machine that is working as the server.
    1.a) You can configure the client machine to use another machine as the compile server by going to Tools>>FPGA Module Options...>>Configure Compile Settings and change the machine from 'localhost' to the machine that you want to act as the server.
    1.b) On the server machine open the Compile Server manually by going to the Windows Start Menu>>All Programs>>National Instruments>>LabVIEW 8.0>>LabVIEW FPGA Utilities>>Compile Server
    1.c) Try and compile the VI.  It should generate code on the client machine and send the generated code to the server.  Wehn the server receives the code it will compile it and return the bitfile when complete.
    2) Set up a remote compile and use the machine that is not working as the server and the machine that is working as the client.
    2.a) Follow the instructions in part 1, but switch the client and server machines.
    These tests should help us isolate if the problem is with the Compile Server, or the code generation.
    Regards,
    Joseph D.
    National Instruments

  • Optical flow equivalent for slo-mo?

    Hi all...
    I have been very interested in discussions about really amazing slo-mo footage, and I did post here recently about my 60fps 7-d footage and how to work with it. I did a test and it worked out well.
    Here is my query;
    Instead of paying thousands for a Phantom camera... ---amazing really... you should check out Tom Guilmettes new site and see his "locked in a hotel room with a phantom' video.. awsome results-- I have seen that with a Final Cut Pro plugin called 'Optical Flow' I saw 7-d footage slowed down to 1% of original speed!!!! and it looked great!!!
    Admittedly, that is far too slow for any useable purpose (for me) but it would open up all kinds of great possibilities.. without the humoungous expense of these pro cameras..
    Is there a similar plugin like Optical flow for Premiere pro6? Or any other workflows (programs) to get my slow-mo's down as if I had shot at say 120FPS instead of only the maximum 60 FPS of my 7-D?
    Thanks all...
    Ray
    Miami Beach

    Timewarp in after effects is almost as good as twixtor (it's got few tweaks for difficult scenes but does pretty well).   Unfortunately you do have to drop in to After Effects to use it
    I was rather hoping it was going to be in CS6 like Warp Stablizer is, because those were the two effects I used most. 

  • Backing up purchases fails due to repeated "medium write errors"

    I was trying to back up my iTunes store purchases to single layer DVD-Rs on my MacBook using the laptop's installed Matshita DVD-R UJ-857 drive. Of the six discs I inserted, I was only able to burn to two, and so I canceled the back up. Granted, the problem could be that I just got a bad box of discs, but a 66% failure rate seems a bit high even for budget discs.
    I really suspect that it is an iTunes issue because of what I see in the status display as the back up proceeds. I was able to accurately predict if a particular write would fail or not by watching the burn status window. On the two discs that succeeded, the status begins with "...initializing" and then lists each title as it is burning to the disc. Finally, it says, ...finishing. This could take up to an hour." That's a successful disc. An unsuccessful disc goes immediately from "...initializing" to "...finishing" without any indication that it attempted to burn anything to the disc.
    I've got some other discs here that I might try to see what happens, but in the meantime, I was wondering if anyone here has had a similar experience or has some tips on getting this to work. I did a quick search of the posts here, but I may have missed something.
    It also occurred to me that the problem could be with the drive. I have an external drive that I could use. Do you know if iTunes will burn purchase back ups to an external burner?

    Okay, I've done a bit more research on this problem, and it appears to be pretty common. Of the discussions I've seen here and on other sites, I've seen three common themes to the responses: try burning a DVD/CD in the Finder to see if the drive will burn something at all, try a different brand of DVD/CD and try setting the burn speed to some slower value.
    I've burnt a DVD in the Finder using the same brand of DVD-Rs that I was using in iTunes, and it went without a hitch. This suggests, but does not prove, that the problem is with iTunes and not the drive or media.
    I haven't tried burning with a different brand yet. If it works, it'll take about 9 hours to complete (18 discs x half hour a disc), and I haven't had that kind of time yet. (Maybe today.)
    I have not been able to try changing the burn speed because I can't find a burn speed option under iTunes -> Preferences -> Advanced. Is there something special I need to do to make this option come up? (I'm using iTunes 8.0 (35).)

  • Starting firefox brings up a dialog box. Title is "Session Manager" and the message is "This operation failed due to a file access error: unknown error". What's up?

    Above says it all

    If anyone is is intrested. I figured out the solution. In the Weblogic Console Located in the JDBC Data Sources. Added correct JNDI Name for Name: soademoDatabase which was jdbc/soademoDatabase. Redeploy and restart server. Works fine

  • IOS 5.1.1 download for iPad2 fails in iTunes to complete with error -3259.

    Hi
    Downloading iOS 5.1.1. for iPad 2 from from iTunes 10.5.2.11 on Windows Professional XP 2002
    Error Code: -3259
    Everytime download timed out after completing @ 400 - 500 MB out of 729 MB.
    Please suggest alternatives or corrections. I have McAfee anti-virus  and firewall but it may not be problem as download completes @ 400 MB to 500 MB
    Thanks 
    Nilesh G

    Hello Apple Support,
    How is it friendly to download 750 MB of Huge File.  There are typical sense solutions to provide
    A)-Either ablity to continue broken download,   OR
    B) Download on computer from a link and then upload to iPad  OR
    C) Split the HUGE iOS 5.1.1. File in 100 or 50 MB each
    BTW turning off the anti-virus is not easy on PCs, and leaving it unprotected for such a loooong download is unsecure.
    Hope you get the point.
    Thanks anyway
    Nilesh

  • Check settings combinations to achieve good Optical Flow HDV 50i -ProRes422

    Hi Guys
    RE: Motion 3, HDV 50i, standard ProRes 422, optical flow
    I'm trying to decide which combination of settings I should choose in order to ensure the highest possible standard of optical flow-treated video for a video clip which just features live people - no graphics.
    So far my results haven't been as 'smooth' as I would have liked. Below I have detailed my steps taken - if you could recommend which combination of 'lighting', 'field rendering', 'motion blur' or 'frame blending' I should choose I'd appreciate it.
    1. I captured my Canon XHA1 HDV 50i video via HDV - standard Prores 422
    2. I edited in FCP6 with standard Prores 422
    3. I sent a video clip to Motion 3, new project and chose Broadcast HD 1920 x 1080 25 fps field order Top (Upper First)
    4. I treated the video clip with optical flow to slow it down.
    5. Export as standard Apple ProRes 422 movie.
    Prior to exporting which of 'lighting', 'field rendering', 'motion blur' or 'frame blending' would anyone recommend please?
    For reference, in this forum David Bogie kindly stated the difference between the choices. I have included his post below. However I just want to be sure I'm making the correct choices, as I'm a bit confused about the '50i' (interlaced) aspect of my video footage.
    Here is David's post:
    "lighting
    field rendering
    motion blur
    frame blending"
    These are options you need to use when you know why you want to use them.
    If you have lights on in your scene, you want to render them. If you have no lights (and no camera) you do not need to activate lights. why does the switch exist at all? I render without lights for preview purposes.
    Fields are necessary for interlaced formats. You must know if your production format is progressive or interlaced.
    Motion blur enhances the illusion of movement by simulating image smear caused by an open shutter. You get the illusion at the expense of rendering time.
    Frame blending is only necessary if you have video clips in your scene and even then you don't need it unless you've changed the speed of the clip. Sort of. "
    Zak Peric also kindly posted, although I think his post relates more to graphics as opposed to interlaced video footage. Nonethless, here is his post:
    "Just use animation codec + alpha if you have alpha channel if not use animation codec millions of colours. This is the best codec for best quality. Also 4444 is a very good codec to use as it supports alpha channel but gives you smaller file sizes. Use always BEST from the render window, if you want additional motion blur then switch it on in render view. Be advised it takes much longer to render with motion blur on."
    Any tips would be really appreciated.
    Warm regards
    Peter

    Hi Mark
    Thanks for your kind prompt feedback.
    "You say you sent a clip to Motion, but then you say you chose project settings - I don't understand this. If you really "sent' a clip to Motion using Final Cut Pro's "Send to Motion" command, you don't need to set project settings - Motion automatically creates a project with settings that match the FCP sequence. "
    Okay I understand - sorry for any confusion caused - I had already used "Send to Motion" and applied Optical Flow to a clip which I then exported from Motion 3 as a Quicktime file. I was planning to repeat this process afresh, but am interested in which settings you could recommend from 'field rendering', 'motion blur' etc that might be applicable to my Optical Flow-analysed footage prior to exporting it as a Quicktime file.
    As regards exporting my Motion work as a separate Quicktime file, I prefer to do this so as to avoid the waiting for it to render in FCP.
    The already-optical-flow-analysed footage is actually pretty good (the original clips from FCP6 have already been stripped down to short durations to suit Optical Flow), but want to to double-check which of the 'field rendering', 'motion blur' etc combinations I should ideally choose to obtain best results, just in case I'm neglecting something that could otherwise make the quality even better?
    Once I finish this video project I'm on I'll definitely be going for a clean install of SL and FCS3.
    So, based on these choices...
    lighting
    field rendering
    motion blur
    frame blending
    ...I'm thinking that for my optical flow-treated video I won't need lighting, as it's mostly applicable to graphics.
    I don't have any graphics in these optical-flow video clips. It's just moving video footage of people.
    Am not sure about whether to choose Field Rendering (interlaced PAL 50i HDV - ProRes422 video).
    Am not sure whether to choose Motion Blur.
    Am not sure whether to choose Frame Blending.
    Any tips would be really appreciated, and thanks again for your valuable feedback.
    Peter

  • Optical flow retime not working

    i am using a backup library and event for a project and now the projects retimes with optical flow with 24p photage are really stuttery, they where not this way in the original project ... any idea why? Ive tried different thinks but i am still getting the same results.

    This problem has also crippled my normal workflow for the past few months, but thankfully I think it's been fixed. I ran the latest OSX software update 3 or 4 days ago (I think it's at 10.8.2 now), but was relulcant to check if optical flow was fixed because the notes about the update mentioned nothing about it. Yesterday, however, I dared to try using Optical flow on a clip just to humour myself, but it worked! Try running Software Update and see if that works for you.
    I'm still a little upset though that thoughout the past few months where FCPX users on Mountain Lion complained about this problem, Apple never said a word about acknowledging the issue, that a fix was on the way, or announced that the issue was fixed. I for one sent about 5 feedback bug reports every 2 weeks about the problem and never received a single response.

  • Optical Flow- Disk Space

    I cannot use optical flow on any clip- no matter the length. It always tells me I do not have enough disk space. I've tried a variety of drives with anywhere from 30gb to 300gb free to no avail. Can anyone give me some tips on getting this working? Thanks!

    Well, for better or worse (Motion does allow dynamic speed changes, so the length of a clip can change in use), the engineers decided to analyze the entire clip. It'd be nice to configure handles or some kind of specified outlier, but for now, that's the way it works. To limit it, manually export a clip (doesn't have to be self contained) and send that to Motion for Optical Flow...
    Patrick

  • Trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit - setup.exe fails due to msxml3.dll error PDApp message [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154

    If anyone is able to solve this they are a genius (or I am doing something very stupid!)
    I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
    Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
    Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
    I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
    These are the FATAL messages from the PDApp log
    12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
    12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
    12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
    The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
    I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
    Is a clean install of Windows 7 + CS5.5 my only option?
    Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
    Thanks.

    Thanks for the reply kglad - much appreciated.
    I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
    Any other ideas?

  • Error: 1051293: Login fails due to invalid login credentials

    Need help!
    I searched all the threads for this but i still have not found one that works for my issue.
    I was trying to add a new essbase server using EAS and i been getting the following error.
    I am able to login into the EAS with the same user name and password, but i am getting the following error when i try to ADD essbase server.
    admin July 7, 2010 12:40:32 AM CDT com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded
    winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT Failed : 1051293 Login fails due to invalid login credentials
    Error: 1051293 Login fails due to invalid login credentials
    Essbase Server: winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT
    Error: 1051293: Login fails due to invalid login credentials
    HELP!!
    Alex

    You have already posted the question here :- Error: 1051293: Login fails due to invalid login credentials
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Optical Flow

    I have purchased Final Cut Pro X and i'm really intreged in the Optical Flow option for slowing down motion in my videos. But i noticed i don't have a lot of control over it. I just say i want it to be optimized for optical flow, then i slow the video down, and it does it's magic on making my 60fps video look like it was shot in 1000fps or something crazy like that!
    but i get all these artifacts in my video that warp and move around a lot. i want to get rid of that.
    i was curious if Motion 5 has optical flow in it, and if it has any better control over it. or if motion 5 does have optical flow in it, if it's just a matter of saying 'i want this to have optical flow and to slow down to 5%', or if there's more to it than what you can do in final cut pro x?

    GFXZen wrote:
    http://www.fxguide.com/featured/art_of_optical_flow/
    Hopefully this will help you ...
    AWESOME article, thank you VERY much for sharing this, GFXZen!
    .... probably way beyond my amateur skills, but very, very, very interesting.
    in my humble hobbyist's observation, too much 'changing' from frame #1 to #2 (I was told the tech term angular speed is of importance here…)  creates wobble, and the Oflow in M5 has some probs with rotation (=I'm doing a lot of soccer stuff).
    my simple rules:
    shooting with high shutter speed (=avoiding natural motion blurr)
    no close ups
    cam on tripod
    = good results.
    … and that fits to the 9 rules mentioned in that article.
    5 stars, GFXZen!

  • Error -: AIP-16001: The model validation engine failed due to an internal s

    Hi Gurus,
    While reactivitaing the config, I am getting the below error.
    Error -: AIP-16001: The model validation engine failed due to an internal system error.
    Could you please help me how to resolve this.

    These are the log files,
    <HEADER>
    <TSTZ_ORIGINATING>2009-08-04T05:38:22.454+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>IP</COMPONENT_ID>
    <MSG_ID>AIP-18529</MSG_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>IP</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
    <HOST_NWADDR>10.236.93.62</HOST_NWADDR>
    <MODULE_ID>IP</MODULE_ID>
    <THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
    <USER_ID>aelshat4</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>Error -: AIP-18529: Failed to reactivate the configuration.
         at oracle.tip.configuration.ConfigurationManager.reactivateConfiguration(ConfigurationManager.java:907)
         at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.handleReactivateConfiguration(DeploymentEventHandler.java:745)
         at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.performExtendedActions(DeploymentEventHandler.java:249)
         at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
         at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
         at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
         at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
         at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
         at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
         at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
         at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
         at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
         at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
         at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    </MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-08-04T05:38:22.455+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>UI</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>UI</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
    <HOST_NWADDR>10.236.93.62</HOST_NWADDR>
    <MODULE_ID>UI</MODULE_ID>
    <THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
    <USER_ID>aelshat4</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>handleReactivatingConfiguration() - Error -: AIP-18529: Failed to reactivate the configuration.</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-08-04T05:38:22.456+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>UI</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>UI</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
    <HOST_NWADDR>10.236.93.62</HOST_NWADDR>
    <MODULE_ID>UI</MODULE_ID>
    <THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
    <USER_ID>aelshat4</USER_ID>
    </HEADER>

Maybe you are looking for