Optical out and internal spaeker issue.. i need help..

how can i get rid of the internal speaker sound without disconnecting it from the board or pluging any 1/8 trs jack at the back while using optical out.
need help ...... thanks!!!!

Hi, and a Warm Welcome to the Power Mac G5 Forum!
Presumably it's the Startup Bong that's getting on your nerves - as you shouldn't be hearing Application sound from the puny internal speaker if you have set all the Preferences to use optical audio-out.
The Bong is part of the Startup routine in firmware, and goes to the basic audio circuit because OS X, and your Sound Preferences selecting optical audio-out, haven't been loaded at that initial stage.
The hardware solutions you have already mentioned.
These may be of interest
http://macupdate.com/info.php/id/16425
http://www.versiontracker.com/dyn/moreinfo/macosx/25458
http://www.versiontracker.com/dyn/moreinfo/macosx/28685
Personally, I find the tinny Bong mysteriously reassuring. Good Luck.

Similar Messages

Line/Optical out and internal speakers?

When a line is inseted into the jack whether it be optical or RCA leads the sound will only be outputted from the jack - obvously.
Is this a software or hardware switch? Is there any way of disabling it allowing sound from both output and internal iMac speakers?

I suppose a speaker with a USB connection will not
override the internal speakers...
Ah, but they do as you must select your output source - in my case I have a 1st generation set of USB Soundsticks and you must select between internal or Soundsticks.
BTW - for those looking for speakers, I would stay away from any USB speakers still out there (although it burns me to do so I might buy a pair of Soundsticks II which use the audio jack... Garageband 3.01 hangs when using the USB Soundsticks unless they're plugged directly into the computer - losing one of the USB 2 ports which HURTS!).

Optical Out and Airplay status

I remember when 4.4 came out, the optical out was thoroughly hosed for people who use the ATV as a simple audio-only bridge to an amp, with no HDMI cable attached. I was able to downgrade to 4.3 in time and have stayed there ever since, though I think the bug was fixed in a 4.4 revision. I've since heard people complain about subsequent updates that there can be a burst of static when optical commences. Starting with 4.4, there was also what I remember calling the "Airplay two-step bug", which required one to go back and forth between the Apple TV and the iPhone/iPod targets to get the Apple TV to play. What's the current state of the ATV2 WRT optical out and these and any other issues?

Hi, and a Warm Welcome to the Power Mac G5 Forum!
Presumably it's the Startup Bong that's getting on your nerves - as you shouldn't be hearing Application sound from the puny internal speaker if you have set all the Preferences to use optical audio-out.
The Bong is part of the Startup routine in firmware, and goes to the basic audio circuit because OS X, and your Sound Preferences selecting optical audio-out, haven't been loaded at that initial stage.
The hardware solutions you have already mentioned.
These may be of interest
http://macupdate.com/info.php/id/16425
http://www.versiontracker.com/dyn/moreinfo/macosx/25458
http://www.versiontracker.com/dyn/moreinfo/macosx/28685
Personally, I find the tinny Bong mysteriously reassuring. Good Luck.

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

IPhone 4 Refurbished broke after 40 days! My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode! It becomes very stubborn to get out and also extremely annoying! Need a permant fix!!

My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode! It becomes very stubborn to get out and also extremely annoying! Need a permant fix!!
No warranty left -_-

Guitargirlcaz wrote:
I've checked with Apple. They only give 28Days warranty now :'(
Whoever told you that is wrong. The warranty on a repair or replacement iPhone is still 90 days minimum. Quoting from their Service FAQ:
If defects arise as a result of service, Apple will cover the repair for the remaining term of the iPhone's warranty or 90 days after iPhone service, whichever provides longer coverage for you.
Call Apple Support and discuss your problem with them. If they agree that it's a hardware problem, they can arrange for mail-in service.
Regards.

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

TS1717 This article is vague and unhelpful. My iTunes needs help from a pro. I have over 120,000 songs -- NO movies, TV, radio, or books... I have other programs which efficiently run things which are not audio-based. So why can I not get iTunes working w

This article is vague and unhelpful. My iTunes needs help from a pro.
I have over 120,000 songs -- NO movies, TV, radio, or books...
I have other programs which efficiently run things which are not audio-based.
So why can I not get iTunes working well?? It now takes at least 10 secs for any operation to be completed!
That is just plain evil. But I am sure I could do something to help.
All the music is on an 2T external drive.

TS1717 as noted in the thread title...
Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
tt2

My iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

my iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

I cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help ��

cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help

From Apple Support...
Here are troubleshooting steps that should help you fix the problem.
1) Quit App Store in multi-tasking.
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button.
Try purchasing an app again from the device to get the security question prompt. You really need to set up the security question.
...it seems to have worked for me.....

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

Contact the developer of the app.
Restore from your backup.

Help IP restore error 21 (DFU ) running DFU and error 1600. I need help

I restore error 21 ( DFU ) >>> running DFU and error 1600. >>> I need help ?

ip 4, 32g is me. I running FW up ios 6.0 >> error 21 ( DFU ) >> mode DFU >>>> error 1600 ( recovery mode )

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

HT4623 i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly

i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly

Same problem with the update, and iTunes can't find my device. I've spent the last two hours researching this and trying everyone's ideas to no avail. I hope someone comes through. Super frustrating :////

MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

You may want to try this.
Solution A
Start up your MBP while pressing Option (alt)|, Command, P, R until your hear 3 chimes rather than 2 as indicated by apple. This worked for me the first time.
Solution B
Start your MBP while pressing Option (alt), Command, S
Hold until you see the computer automatic routine. When it finally stops type the following followed by "return":
fsck -fy
It will probably indicate some problem related to "pcscd.pub" (should be 16 instead of 17). I haven't figured out what this means but somewhere in the Internet i read it is related to scan cards...
More importantly this routine will fix any problems with your HDD similarily to disk repair. When it ends, it will tell you if it has fixed/modified anything. If it has, run the routine again by typing again "fsck -fy"
Lastly, reboot by typing "reboot" (followed by "return")
Solution C
Start up your MBP while pressing option (alt), command, S
hold keys until you see computer commands scrolling
when the routine stops type the following, each line followed by the "return" key:
mount -uw /
chmod 775 /
chmod 1775 /
reboot
After which your computer should reboot on it's own.
Each of the above has worked for me at one time or another. Once your computer has rebooted from the DVD you can reinstall OS X. If your problems started after installing 10.5.6, then I don't suggest updating until 10.5.5.
I'm very very disappointed with my 2007 MBP, it started to give me problems after 1 year. had to change the HDD and lately when I isntalled 10.5.6 it suddenly refused to start up., My previous Mac laptop (2003 866Mhz) worked for 4 years without a hitch. Ironically I've had to use it to access the internet and find solutions for my current MBP.
best of luck

Optical out and internal spaeker issue.. i need help..

Similar Messages

Maybe you are looking for