Optical out...but wait, m

Im sorry if this has been asked before. I did look, but failed to see anything relevant.
Now, I have the Creative X-Fi Extreme gamer. I have it all working just fine under Vista. Awesome sound.
Now, the problem here-in lies. I want to add a 5. system into the loop. Just a cheapish one for gaming. For the most part I will have my headphones on, but when the missus goes to bed, I want to have the option of putting it out to speakers.
I was looking at:
http://uk.europe.creative.com/shop/product.asp?category=3&subcategory=9&product=357&p age=
Which fit the price range nicely. BUT MY MICROPHONE is a MUST. I see on this card that the Optical out doubles as the mic port. I have looked to see if there is a way I can juggle my jacks like you could with Realtek on board.
I cant seem to find such an option. So if I plugin a 5. through the optical, what happens to my mic?
I play in a clan using Ventrilo (VoIP program), so I really do need access to my mic.
Im kind of surprised that a card aimed at gamers would seemingly have a poor mic set up, especially as games these days have VoIP built in.
Maybe I am way off base, am hoping there is a solution.
Thanks.Message Edited by Eclectik on 08-27-200707:38 AM
Message Edited by Eclectik on 08-27-200707:39 AM

Hi Eclectik
Creative Inspire T600 connect to the X-Fi via Line Out Jack ,2 and 3. Don?t have SPDIF connection so don?t need use Optical Out (flexijack port), can use mic.
http://lh5.google.es/rmorinr/RqWuq57cvXI/AAAAAAAAAc0/5iCouGt83uk/s288/xfigamer.jpg">Message Edited by Rad-Wulf on 08-27-200705:34 PM

Similar Messages

Optical out dont work

hi ppl my audigy 2 nx is conected to av receiver marantz sr 4000 whit optical out but don?t work can anybody help me
ps: os windows vista 32 bit.

Are there any settings that let you set which of the digital outputs is acti've.
I would imagine they're both always on, but you never know.
Other than that I don't know tbh. I don't have an A2 NX.
Try contacting Creative support and aks them.
I'd copy and paste everything we've talked about in to the e-mail so you don't go over already covered ground.
If I remember correctly, there may be a setting within your colume control application that lets you check a little box that basically enable digital output (which is more than likely disabled by default). Look for a little plus above the main volume slider. Re check the manual regarding digital output as well.

Xtremegamer no output from optical out in Vista 64.

Hello,
I spent over 2 weeks going over those forums and goggling around the problem I have. ?
Ever since I upgraded from Vista x86 to Vista x64 I cannot get the sound out through my digital out (flexijack) connection. I am connecting to Onkyo SR800 ( I don't think Onkyo is causing the problem since it worked before)
Here is what I tried:
. I verified the optical cable and mini-toslink adapter work.
2 I tried latest drivers from Creative site.
3. I tried older drivers ( SBXF_PCDVT_LB_2_5_0004,? SBXF_PCDVT_LB_2_5_0002 ?SBXF_PCDRV_LB_2_5_0006)
4. I tried changing spdif out to default audio device in vista.
5. I tried changing sampling rate from 48 to 96 Hz in audio console.
6. I readjusted all volume controls in both vista and creative to the maximum.
7 I tried sending test sounds to spdif out.
8. Tried Daniel_K's support packs.
9. Some of the older drivers used to have other tab with Digital I/O checkbox, but that did not help also.
To add some background information:
My onboard audio is disabled and I have no problems outputting sound to my 2 speakers connected to line on the XFI Xtremegamer. In vista x86? I was able to output simultaneously to both my 2 crappy speakers and to my Onkyo receiver (7.). I saw that some people were able to get stereo output through optical out, but I can get a **bleep** squeak out of my onkyo from XFI.
I don't usually post on the boards, because I am able to come across a solution, but this is the first time in my life that I could find a solution. If it wasn't for the price I paid for XFI, I would probably ditched it already and went with onboard Realtek. The problem is that I know XFI sounds better, besides I already spent the money so it's not very useful outside of my computer.

Jmacguire,? thanks for your advice.
It's a very interesting post, I think it should even become a sticky here as it very nicely describes how Vista passes audio to applications.
Unfortunately, that doesn't fix my problem. I tried setting my speakers to 5., and 7.. I also tried setting spdif as a default audio device, but then I get no sound? at all. ?
I went as far as configuring ffdshow filter to enable spdif pass trough. Since I don't even hear a test sound from windows in my receiver, I think that there is some option somewhere that pretty much disables any output to my flexijack.
Also a funny observation,? when I downloaded an iso image of creative officuial drivers ( from April last year I believe)? I had extra options for digital input/output in speakers tab in control panel and in creative audio console.
It seems weird that creative removed those options from newer drivers.
However, checking the checkbox by enable digital I/O did nothing for my problem.
I begin to wonder what would be the most cost effecti've solution to connect my pc to my receiver. I want to use both my computer speakers and my Onkyo receiver, and by using audio jack splitters I will loose stereo signal (if I am correct) and that's a path I do not want to take, but if flexijack will not work in vista 64, I do not have a choice.

Optical out fail, but still shining?

Hi,
I have previously used my optical out fine. Recently I have tried using it to no luck. There is light shining through my optical cable. The mac automatically sets the output to optical. But no luck with my devices. (Surround sound a DAC) Anybody know anything I can try? Can this be a hardware issue if its still emmiting light and registering it automatically?
Thanks

Hi there Jmttdr,
While the symptom listed is not the exact issue your are experiencing, I would still recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

Hi is true that there will be a iphone 6 comming out in july if u could pls get back to me as I want to buy the iphone 5s but if the iphone 6 is comming out ill wait for that one

Hi is it true that the will be a iphone 6 comming out in july if any one could tell me cos I want to get the iphone 5s but if there will be an iphone 6 comming out ill wait for that one if any one could let me know thanks

This is a user to user help forum only so doubtful is anyone here knows. If someone here is priviledged to this info in advance, they are under Apple's strict non-disclosure agreement which prevents them from saying until Apple make an announcement.

When I plug my headphones into the headphone/optical out jack programs hang

I have an iMac 20 inch LCD. On the back their is a jack with a picture of headphones, but it is also labeled as "optical out". I plug my headphones in and they work. Great. That is not my problem today.
My problem is that whenever I plug the headphones in or unplug them, iTunes (and other apps using audio) hangs and when I try to adjust the volume with the keyboard buttons nothing happens for 15 seconds or more and then the volume changes, not that anything is able to play. If I wait for a minute or so then all my applications start working fine again and I am able to hear my music and adjust the volume.
What in the world is going on?
1.8 Ghz G5 1.25GB RAM Mac OS X (10.3.9)

Thank you. That is good information.
Does this mean that there is nothing I can do about the delay? When I think of a delay, I think of maybe 10 seconds. I am having to wait for a minute or more for my audio to switch. While I wait, I have no audio and any audio program hangs. Is there a setting I can change? It seems rather ridiculous that I have to wait so long just to switch from internal speakers to headphones.
It is like this on other Mac machines? Or it is just my iMac? I hate to compare Mac to Windows, but on Windows or Linux computers the switch is instantaneous.

Beginning of audio cut off when using digital optical out

Hi all,
This is my first post here since switching to Mac earlier this year.
I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out. This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like). I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906). Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
The problem does NOT happen when using the built-in speakers. I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing. If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped. I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something). I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it. It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead). However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago. It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support. So here I am!
Does anyone else have this problem with optical out, and how can I resolve this? Any help would be gratefully appreciated.
Thank you.

Hello kcore66,
Would it be possible for you to upload one of the files in
question so that I can take a look. In Captivate 1.01 there is an
intermittent problem where sometimes the audio is either cut off or
just doesn't play when you publish / preview. To get around this
simply moving the audio object back and forth along the timeline
and then positioning it back in it's original position works 9
times out of 10.
HTH
Regards,
Mark

Creative inspire t6300 5.1 surround on mac pro 1.1, optical out to 5.1 audio gear (digital sound decoder).

Hi there,
Been searching and trying a lot but no luck so far. I have a surroundset Creative Inspire t6300
to be able to add some more fun to movies and a few games on my mac.
I own an upgraded Mac Pro 1.1 under Snow leopard, 2.33 gHz, dual processor, 8 core, 8 gb memory.
Even though it`s a piece for the museum, it works very well for designwork I do for work. No real need
to update for me, so....
As I understand, the optical out is standard 5.1. (By the way, the only other ports are the basic sound ports out
and in on the Mac). So after some research I found and got the 5.1 audio gear decoder. I connected this with
an opticle cable and used the 3,5 jackets from the surroundset to connect to (from left to right) cen/sw, (yellow
jacket) fl/fr (green jacket), sl/sr (black jacket) on the decoder. All perfectly understandable and it seemed to work well.
But when I tested with some of the testfile you find when googling on that, I think there is something wrong,
the typical surround effect is not there, it rather sounds more like stereo or even 5 mono`s.
I`ve tried Soundflower and JackPilot, but couldn`t get it right. With Soundflower I was able to choose 5.1 setting
(was not possible before) but testing it didn`t work.
There is an extensive test of the decoder on the net by someone who really is deep into the technics of it all but
no luck there either.
Back to basics: is it right that the optical out is truely 5.1 on the mac? With several tests the unit SFE does not react.
But when I play some music with iTunes, it works (loud and clearly :-)). Maybe I need a visit to the audiologist ;-) ?
Anyone?
tested with: http://www.youtube.com/watch?v=eL9-sIZRDHg&channel=alexnosenko
http://www.youtube.com/watch?v=sMh_zvCw6us
https://www2.iis.fraunhofer.de/AAC/multichannel.html

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

No optical-out sound on MSI KT4-Ultra!!

Hi, I have recently set up a system based on the MSI KT4-Ultra board. I'm using an Athlon XP 1700+, a Radeon 9000 video card, and I've installed Windows 98.
Although all the drivers and audio applications which MSI provided installed fine, and 2-channel audio from the on-board sound chip works great both for music and for the 3-4 games I've installed so far, I can't seem to get the optical SPDIF port to work! I bought a cable and connected the computer to my Sony MD-player and attempted to copy my CDs onto MD. I go into the MSI control panel and check the box to enable SPDIF-out, removing the speaker cable from the analog line-out just for good measure. When I plug the optical cable into my MD it recognises digital input and prepares for recording. I press record on the MD and play on the computer's CD-player app, but the MD LED shows "no signal". I'm pretty sure both the MD recorder and cable are OK since I've used them to copy CDs from a Kenwood portable CD-player quite recently, so it must be the MB that's giving me problems. Indeed, when I've stopped playback in the CD-player app and went back into the audio control panel, I found that the SPDIF box had been unchecked of its own accord. I've tried this several times, and I've unplugged the S-bracket and reinstalled it all over again just to make sure it was plugged in properly, and I still get the same problem. All audio works fine except optical out! Haven't got a coaxial cable or recorder so I can't check if the coaxial port is equally buggered or if it's just the optical, but I'm getting really annoyed here: this was the one feature I liked best about this board and the only one which isn't working! Any ideas, anyone?

dude, i think i can get u ur signal, but currently i can only get silent recordings, u may have better luck.
on the minidisc, there should be a switch or button that will toggle synchronised recording on and off, turning it off should get u a signal, but it wont be in sync wiv the cd, ie u cant trust it to form track gaps.
hope that helps, done flame me if it dont, if i manage to get substance to my recording, i will send u the info just in case.
take it easy

Optical out sends constant noise to speakers

Hi,
Is it normal that when I connect the optical out to the surround sound system the speakers produce a constant hissing noise. If I connect any other device with optical out to the surround system instead of the AppleTV, the speakers don't produce this annoying feedback noise. Is this a problem with my specific AppleTV or is this a design malfunction in all AppleTV devices.
The noise always has a constant volume.
I have tried connecting it to a different surround sound system, and the AppleTV
still produces the same noise. It's likely that most people won't be bothered by
this, but I have sensitive ears and I did expect high quality output from this
rather expensive device (given the limitations apple has enforced upon it, even though the hardware is capable of so much more).
Thnx.
(To bad I couldn't get online support from Apple for the AppleTV, seems
they only have e-mail service for iTunes store????)
Message was edited by: timothyparez

This is a public update of Lion available since last night.
No a developer thing.
Click in your "Apple" menu (top left) and then "Software Update"
The usual procedure.
I have left my machine on all night long and the sound is still good and the "SoundStay" app is still runnig fine.

Connecting 5.1 desktop speakers directly to optical out on iMAC - how?

I have Logitech X-540 speakers
http://www.logitech.com/index.cfm/speakersaudio/home_pcspeakers/devices/234&cl=us,en
I can only find external sound cards that hook through USB. Is there a way to connect the 3 colored cables (orange, green, black) from the Logitech speakers to some conversion cable or cable converter to connect to optical out on the back of the iMAC? I have read the forums and can't find much aside from connecting your iMAC to a home theater setup. Thanks!

discbrown wrote:
Is it even possible to do optical out to 3 - 1/8" (3.5mm) stereo minijacks
on my 5.1 computer speakers?
Nope. The iMac's optical out is an AC-3 encoded digital feed, but your
speakers require six decoded analog signals. You need a 5.1 decoder --
something like FireWave, or a DolbyDigital receiver, or a speaker system
with a built-in decoder.
Looby

Audio Probelms with some DVDS/BLU-RAY discs when using optical out to Audigy 2

I have my PS3 connected to my Audigy 2 ZS soundcard via optical?cable to play 5. sound on my PC sound system (Klipsch Promedia Ultra 5.). I have finally successfully played discrete 5. sound with some DVDs. I have changed my optical out setting to bitstream in the DVD/BD menu (XMB) and selected optical with everything checked in (XMB). So far, The Matrix, The Matrix Reloaded and Minority Report have worked in proper 5. (not stereo matrixing). Both Dolby Digital and DTS tracks (I know it works because it sounds twice as good as Dolby?Digital) ?work in Minority Report. The problem is... Jurassic Park (DTS) and my Blu-ray MIssion Impossible 3 have no audio (probably more too). The STRANGE part is if I fastfoward both films by .5x (so that audio plays in FF) I can hear audio. When FF by .5x the display signal on the top of the screen changes from DTS or DOLBY DIGITAL: Multi Channel to DTS or DOLBY DIGITAL: 5..
What is with that?Also I still do not get audio in any games, Resistance (Blu-ray)?or any game demo but I do get the audio from the game display screen (XMB). Please if anyone has?any?useful advise or information it would be greatly appreciated.
?Thank you!

I have my PS3 connected to my Audigy 2 ZS soundcard via optical?cable to play 5. sound on my PC sound system (Klipsch Promedia Ultra 5.). I have finally successfully played discrete 5. sound with some DVDs. I have changed my optical out setting to bitstream in the DVD/BD menu (XMB) and selected optical with everything checked in (XMB). So far, The Matrix, The Matrix Reloaded and Minority Report have worked in proper 5. (not stereo matrixing). Both Dolby Digital and DTS tracks (I know it works because it sounds twice as good as Dolby?Digital) ?work in Minority Report. The problem is... Jurassic Park (DTS) and my Blu-ray MIssion Impossible 3 have no audio (probably more too). The STRANGE part is if I fastfoward both films by .5x (so that audio plays in FF) I can hear audio. When FF by .5x the display signal on the top of the screen changes from DTS or DOLBY DIGITAL: Multi Channel to DTS or DOLBY DIGITAL: 5..
What is with that?Also I still do not get audio in any games, Resistance (Blu-ray)?or any game demo but I do get the audio from the game display screen (XMB). Please if anyone has?any?useful advise or information it would be greatly appreciated.
?Thank you!

CD player Toslink optical out to optical digital audio in port. Need help

Hello,
I'm taking the Toslink Optical out of my Sony 707esD CD player into the Audio in/optical digital audio in port of my March 2009 iMac.
In System preferences>Sound>Input>Digital in Optical digital-in port I see a signal occurring on the input level meter but I do not hear audio.
Output is headphones port and is working fine from other sources.
I see a signal input does anyone know how to hear the output.
Thanks.

You need the free LineIn app from Rogue Amoeba.
http://www.rogueamoeba.com/freebies/
Dah•veed

Added SPDIF Optical out to MSI A75-G35 and I get no sound

Hello, I connected a TOSLINK cable to my Onkyo receiver in lieu of 2 channel analogue. I know I'm configured correctly on the receiver's end. I set up my realtek HD audio manager to send music via WMP to the receiver using the PC's optical output. The receiver is not recognizing any PCM signals from my PC. I even popped Skyfall in the PC optical drive. It plays the video just fine but the receiver doesn't even pick up the Dolby Digital signal from the movie. I get no sound from the optical output, period.
When I configure audio manager for an analogue signal output through my headphones, all is good. I change the settings to employ the optical output, and nothing happens.
I just want to play music on my home audio system via my PC mobo's add-in optical output. 1st, I had the latest HD audio drivers from the MSI website, which didn't work. Right now, I'm using audio driver version 6.0.1.7083, dated 11/5/2013
Also, I tested the optical cable on my cable receiver box to the onkyo receiver. No problemo.
Any other info about my system hardware or software that you need, just let me know.
Thanks for reading
MSI A75-G35 mobo/ BIOS VERSON 1.7, dated 11/07/2012
Win7 x32 bit
Audio controller hd Audio by realtek
Audio codec is ALC887

LOL No, I modified a toslink header bracket provided for an old DFI mobo. It's a simple 3 wire config(ground, optical out, +5V). Trust me when I say I got it right when I rewired the pinout. I have a red light passing through the end of the cable. The SPDIF header is a $15 option from MSI and shipping cost is $16 and change.

Xdock Optical out to MD in?

Hi there,
have just become the proud owner of an Xdock transmitter & receiver pair. Unfortunately, my pride is draining away fast!
I bought this to connect to a Sony micro system that only has an MD (optical) in.
Having connected it up, I'm getting no sound. I have checked using the headphone socket that sound is indeed being produced.
Have been reading the manual that came with it, and am now fearing that it only outputs DTS encoded data.
I've no idea what the MD stream would be - plain stereo? - but any help appreciated.
Thanks,
Heeb

Thanks for the quick reply, but no, that's not the system (model num HCD-SE - it's a few yrs old, but otherwise a nice bit of kit).
My system has both MD in and MD Out - presume for recording from CD (I've naturally tried both!). Only other connection is CD optical out.
There is most definitely not any aux-in (wouldn't have purchased this almost lovely piece of kit otherwise)!.
I still fear it's some kind of encoded bitstream (DTS) coming out the dock, which the micro system just doesn't understand. If that's the case, I guess I'm wondering if there's anything I can do to the xdock to alter this?
Thanks,
Heeb
UPDATE - managed to track down the Sony system manual - says that the MD in is to connect an optional analog component.
Message Edited by Heeber on 02-04-2009 04:36 PMMessage Edited by Heeber on 02-04-2009 04:36 [email protected]

Optical out...but wait, m

Similar Messages

Maybe you are looking for