Optimal Brightness and Auto Brightness
What are you guys finding to work best, the auto brightness and leaving it as it came from Apple (in the middle) or adjusting it yourself..I tend to leave it on full brightness...and I know this impacts battery life, but wanted to see what you guys thought.
I still can't figure out how the whole auto brightness works. you can still set the brightness and then leave auto "on"
So does it just try to automatically keep the brightness "medium bright" if you have it set to medium and "auto" or what? I haven't been able to see any automated brightness adjustments at all. I tried going from a really dark room to a really bright room to see if I could tell if it was auto adjusting. I couldn't tell. maybe I'm doing something wrong.
Similar Messages
-
Problems with .ARW files and auto toning
problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the helpsorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place. -
Advice required on optimal MTU and MSS settings for GRE and IPSEC connections
Hi,
We have 2 remote sites (Site A and Site B) which connect to our datacentres (DC) over IPSEC VPN and connect to each other over GRE tunnels.
We had some issues recently which we believe were MTU/MSS related (browsing web servers at one location not appearing correctly etc)
We got some advice from our Cisco partner and tweaked some settings but I'm still not convinced we have the optimal configuration - and we still have some problems I suspect may be MTU related. For example, from our DC (connected to Site A by IPSEC), we CANNOT browse to the webpage of the phone system hosted at Site A. Yet, we CAN browse to the webpage of the Site A phone system from Site B (connected over GRE)
Site A and Site B have two WAN internet circuits each - and each provider presents their circuit to us as ethernet.
Here are the relevant interface settings showing the currently configured MTU and MSS (both routers are configured the same way)
Can someone advise on what the optimal settings should be for our MTU and MSS values on the various interfaces or how we might best determine the values?
interface Tunnel1
description *** GRE Tunnel 1 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface Tunnel2
description *** GRE Tunnel2 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface GigabitEthernet0/0
description "WAN Connection to Provider1"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
crypto map cryptomap
interface GigabitEthernet0/1
description "Connection to LAN"
no ip address
ip flow ingress
ip flow egress
duplex auto
speed auto
interface GigabitEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address [removed]
ip access-group 100 in
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 25
ip address [removed]
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/2
description "Connection to Provider2"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
duplex auto
speed auto
crypto map grecrypto
Thanks.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html -
Yoga 2 Pro tent mode and auto-rotate not working
I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
How can I continuously auto-save and auto-name the JPEG files with a controlled time interval
Hi,
I am newly involved in some Labview projects that out of my knowledge. I am trying to save multiple JPEG images from a live imaging task to a folder in the computer hard disk every certain minutes. I'd like to name these files with the date and time (eg. Img_06012011_1635. jpg).Then, after hours long image capturing, I can have all the image files in a neat order.
My goal is to have the jpg files auto saved and auto-named with the data and time at that moment. I also need to control this waiting time between each savings.
Could you please show me some hints about this? See the vi attached, I know I need to do something on the "write path" part on the up right corner. Thanks!
Solved!
Go to Solution.
Attachments:
capture.vi 28 KBThanks, Steve. When I built up a path with the date and time info and send them to the WriteJPEG File.vi like you mentioned, it stopped saving any files into the folder. Do you think this is the problem from my while loop?Could you show me if there is any other secret functions that restrains the file saving?
I am planning to save the image files every 30 secs,for example, and then I can have a bunch of jpg files with their unique names after hours long image acquisition.
I appreciate you kindly help!
Attachments:
capture(updated).vi 29 KB -
Magnetic lasso and auto sharpen not working correctly
anyone having this problem with PSE 3.0
Which operating system are you using?
What is not working with the Magnetic Lasso Tool and Auto Sharpen?
Have you tried resetting the photoshop elements 3 preferences?
To reset the preferences:
Press and hold the Shift+Alt+Ctrl (windows) or Shift+Option+Command (mac) keys just after starting the launch of the pse 3 editor.
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop elements settings file
Press Yes to reset the preferences. -
Confused about the use of TONE and AUTO buttons
After moving an image from Library module to Develop moddule (in LR4) , I open the basic panel. In the basic panel, I see two text buttons: TONE and AUTO. The AUTO button seems to be the default setting. I could re-adjusst the tones as it requires. I have no problem with the ATTO button.
When I press the AUTO button, the TONE button is activated. Then, colors and tones changed immediately. When I move one of the tonal sliders (e.g., Exposrure), it activates the AUTO button. I thought that the TONE button was intended to use for manual tonal change. I am confused. What is the TONE button for?hummer,
Tone isn't a button, it's just a label.
When you push the Auto button, it becomes de-activated because the tone sliders have been moved to where Auto thinks they ought to be. When you then move one of the sliders, the button becomes activated again because the sliders are no longer where Auto wants them, and you can push it again to take the sliders back to where it put them the first time.
Hal -
Difference between fixed focus and auto focus?
what is difference between fixed focus and auto focus and which is better?
Thanks for the advice Phonehacker, this Forum is so helpful on a variety of subjects, and the users are so patient, that's why I enjoy it so much My diet is now perfectly organised and my larder is full of Brown Bread and Red Wine
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
Passwords and Auto Fill not working...
All of a sudden, new passwords are not being retained and auto fill doesn't work at all. I've repaired permissions, checked every setting I can think of. What should I try next?
Thanks,I had a similar problem with autofill. Repairing permissions with Onyx seemed to work. (But first, double-check that Autofill is enabled and your "me" Address Book card is correct.)
-
Hi I bought an I Pad Gen1, used, with no accessories, will my I Phone 3 charger, wall and auto work with it or do I need to buy another? Have not received it yet( ebay).Please advise. Thank you.
Your iPhone charger is 5W, whereas the iPad 1 charger is 10W. The iPhone charger will work, but the charge time will be more than double. If you buy a new charger, get the iPad 4 charger which is 12W. It will charge faster than the 10W charger.
FYI
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Would a 347 MB file be slow? Auto save and auto type turn off?
I am doing an art inventory and add jpegs of the art. I don't resize them they range from 750k to 3MB. I guess if it is slowing the program down i should? It currently is 267 rows by about 18 columns.
Thanks in advance.
Oh can I turn off auto save and auto type? That may help. How do I do that?Done.
Enter Scrip Editor
paste the posted script
File > Save > as Script on the Desktop
Move the script to the folder :
Macintosh HD:Library:Scripts:Folder Action Scripts:
CAUTION, you will be asked to enter your pasword.
Create a folder to do the job. I named mine Normalized. I created mine on the Desktop where it's easy to reach.
Go to :
Macintosh HD:Library:Scripts:Folder Actions:
Double click the alias : Configure Folder Actions
Below the left column, click
navigate to select your new folder
Below the right column, click
select the script image - normalize400.scpt
After that, drag and drop a picture file onto your folder.
The original will be move in the folder Originals (isn’t it original ?)
and a reduced copy 400 x height will be stored in the folder Normalized images.
And now, here is the script :
--{code}
Image - Normalize
This Folder Action handler is triggered whenever items are added to the attached folder.
The script rotates the image counter-clockwise (left).
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
modified by Yvan KOENIG (VALLAURIS, France)
2011/12/08
This version normalize pictures so that
(1) the greater dimension become the width one (rotate left if needed)
(2) this greater dimension is ruled by the property maxWidth defined below.
property maxWidth : 400
-- set it to fit your needs
property done_foldername : "Normalized Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
tell application "Finder"
if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
end if
set the results_folder to (folder done_foldername of this_folder) as alias
if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
set current view of container window of this_folder to list view
end if
set the originals_folder to folder originals_foldername of this_folder
end tell
try
repeat with i from 1 to number of items in these_items
set this_item to item i of these_items
set the item_info to the info for this_item
if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
my resolve_conflicts(this_item, originals_folder, "")
set the new_name to my resolve_conflicts(this_item, results_folder, newimage_extension)
set the source_file to (move this_item to the originals_folder with replacing) as alias
end tell
process_item(source_file, new_name, results_folder)
end if
end repeat
on error error_message number error_number
if the error_number is not -128 then
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end if
end try
end adding folder items to
on resolve_conflicts(this_item, target_folder, new_extension)
tell application "Finder"
set the file_name to the name of this_item
set file_extension to the name extension of this_item
if the file_extension is "" then
set the trimmed_name to the file_name
else
set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
end if
if the new_extension is "" then
set target_name to file_name
set target_extension to file_extension
else
set target_extension to new_extension
set target_name to (the trimmed_name & "." & target_extension) as string
end if
if (exists document file target_name of target_folder) then
set the name_increment to 1
repeat
set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
set the name of document file target_name of the target_folder to the new_name
exit repeat
else
set the name_increment to the name_increment + 1
end if
end repeat
end if
end tell
return the target_name
end resolve_conflicts
-- this sub-routine processes files
on process_item(source_file, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
try
-- the target path is the destination folder and the new file name
set the target_path to ((results_folder as string) & new_name) as string
with timeout of 900 seconds
tell application "Image Events"
launch -- always use with Folder Actions
set this_image to open file (source_file as string)
set {oldW, oldH} to dimensions of this_image
if oldH > oldW then
set {oldW, oldH} to {oldH, oldW}
rotate this_image to angle 270.0
end if
set |échelle| to maxWidth / oldW
if |échelle| < 1 then scale this_image by factor |échelle|
save this_image as JPEG in file target_path with icon
close this_image
end tell
end timeout
on error error_message
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end try
end process_item
--{code}
Yvan KOENIG (VALLAURIS, France) jeudi 8 décembre 2011 21:25:33
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I am testing ISE and Auto Smartports and i got the execution of the macro via ISE working.
However, it seems i MUST enable globally "macro auto global processing " before it the macro is really executed.
I would like to avoid this, as enabling this globally, it will automatically run all standard cisco macros for phones, AP, etc.
To prevent this, i need to configure "no macro auto processing" on each and every interface...
Isn't there another way to enable macros but not run the default macros on all ports. Only run -custom- macros when triggered by ISE ?
regards,
GeertYou may need to create a Cisco TAC case for this.
If not, then move this thread to the EEM section. If the Moto AP supports CDP then you can get someone (like Joe Clark) to build a small EEM script.
EEM is supported up to the 3560/3750. -
FlexConnect (aka H-REAP) and Auto-Anchor functionality
Hi Board,
I never did H-REAP on my wireless deployments. Now, I have an H-REAP (FlexConnect) requirement for branch offices.
Also there is the requirement for guest access at the same time.
From my understanding those features (FlexConnect and Auto-Anchor) should work together.
Please refer to the following exibit:
There is a FlexConnect AP at my branch office. The traffic from internal users (SSID "Internal") should be switches locally at the LAP (Lightweight Access Point). At the same time the guest SSID (SSID "Guest") should be tunneled back via CAPWAP to the controller to which the LAP is associated ("Central Controller"). The guest traffic should not emerge (switched) at the "Central Controller", instead it should be tunneled to an anchor controller in a DMZ via an "Ethernet Over IP tunnel" (Auto-Anchor functionality).
First question: Does this work (FlexConnect in conjunction with Auto-Anchor functionality)?
If this works, where's the web portal for guest authentication hosted (if using the internal web auth on WLC)? On the "central controller" or the Anchor controller? (I guess at the Anchor Controller in the DMZ, right?)
Is it possible to leave the guest SSID "open" with no webauth and still using the Anchor Controller? This would be needed if I have an external web authentication service, which would be hosted by a provider.
Thanks in advance for all your replies!
JohannesThe Flex 7500 deployment guide ("
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
") states:
"The Cisco FlexConnect Solution also supports Central Client Data Traffic, but it should be limited to Guest data traffic only."
later in the document there is a section about Guest access that states "Flex 7500 will allow and continue to support creation of EoIP tunnel to your guest anchor controller in DMZ."
Hope that helps. -
Auto keyframe and auto transition not working
auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....
In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?. -
Photomerge and Auto Align/Blend issues!!! HELP!
I have a lot of photos that I need to create panoramas of, and when I use Photomerge all of the photos that I want to create a panorama of show up on the same image, but are stacked one on top of the other. Not linked or mergedin any way. They all have vector masks, but nothing covered up. When I try to use the Auto Align and Auto Blend modes for a panorama, an error box shows up saying that I don't have enough coverage area of 40%, but I certainly do. They images are very similar, and taken by standing and moving 360 degrees. I don't understand why Photoshop doesn't like these images? But I have to make about 100 panoramas, so any and all help and insight would be greatly appreciated!!!
What OS are you running? 32 bit or 64 bit? How big are your source images and how many do you have for a given pano?
I just did a 360 degree pano that ended up 25689 x 1850 pixels (after cropping) from 17 raw Canon 40D images, all handheld while standing in different spots around the Clingman's Dome observation tower in the Great Smoky Mountains National Park. Photoshop CS5 standard 64 bit on Windows 7 x64 with 8 GB RAM didn't have any problem at all with it, though it took about 10 minutes or so to finish. The result came out astoundingly good, even though the slight changes in perspective should have been challenging.
http://Noel.ProDigitalSoftware.com/temp/ViewFromClingmansDome_NPS.jpg
If you don't mind my asking, what do you do with hundreds of panoramas? It's an difficult image format to find uses for to say the least.
-Noel
Maybe you are looking for
-
Can you have more than one apple id under the same account
can you have more than one apple id under the same account
-
Material form Packed, Loose is maintained for RG1 Register----where?
Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Tot
-
I have tried to send large files that can not be received as they are too large? Rather than break up the files, are there services to which I can send the file and they have my recipient go to, to obtain the file? Thank you.
-
ITunes Match eats traffic despite the fact that i disabled cellular data for him
Hello there Today i notice that my money on mobile operator account is running low suddenly. Usually i listen to itunes match music with wifi. Today at morning i listen to some cached music on my device (nocite that celluar data for itunes match was
-
Hello I have 3 problems. My virtual keyboard is displayed more. I d'ont found the most Tweeter application, yet it exists in the list. And I can't open new applications I downoload in Appworld because my terminal displays ERROR. Please help me