Optimal FLash export for web ??

I'm trying to export a 2m34s flash for my website, but I keep test exporting clip that play strobbing because they'Re too heavy even if they are much lower size then many Quicktimes I've exported and played fluidly.
What would be the optimal setting for exporting a low res Flash and then a High res Flash 1920x1080 from an uncompressed HD AVI 10-bit with AIFF 24-bit stereo 48 000 ?
Thank you.

I've made 4 tests exports:
2 F4V = one scaled half and one scaled 1920x1080.
2 FLV = one scaled 3rd and one same as source which is 1920x1080
all 4 plays badly on my computer even when minimized to less than a fourth of my 19 inches widescreen monitor.
My computer is AMD Athlon x2 6400+, 8 GB RAM Windows Vista, NVIDIA Quadro FX 1500, separated raid 0 drive for video in SATA 2, basically I've edited HD timelines with no problem with this setup...
Here's the exports setting of my 4 tests:
F4V (h264) HIGH res:
VRB 1 pass
fps same as source (29.97)
Field Upper
Profile High
level 4.1
Target Bit rate 9
Max bit rate 12
keyframe distance 30 frames
audio 44.1 stereo AAC 128 kbps
audio quality: High
F4V (h264) low res:
VRB 1 pass
fps same as source (29.97)
Field Upper
Profile High
level 4.1
Target Bit rate 2.5
Max bit rate 3
keyframe distance 30 frames
audio 44.1 stereo AAC 128 kbps
audio quality: High
FLV HIGH res:
On2 VP6
VBR
fps same as source (29.97)
Bit rate 1500 kbps
quality best
undershoot 90
audio 44.1 stereo AAC 128 kbps
FLV low res:
On2 VP6
VBR
fps same as source (29.97)
Bit rate 1000 kbps
quality good
undershoot 90
audio 44.1 stereo AAC 128 kbps
Thank you for your help.
Frédéric

Similar Messages

Export for Web using optimized for "download" or "streaming"?

Hi,
Exporting for Web have some setting there,i'll choosing the .mov - H264 - and medium low quality - 15 Frame Rate - Checked Frame Reordering, others Automatic and the Audio will be 32.000hz and Mono.
Now,what about the optimizing? Download or Streaming?
What about Self-Contained Movie? do i need it?

optimizing for download or streaming depends on what sort of site you're sharing it on. Will it be streamed or a download file?
It must be self-contained, unless you are going to be streaming it, and hosting it from the machine that the original media is on. Even then I'm not sure that would work reliably.

Export for web doesn't work (X and 7).

I use the export for web feature a lot. I find that I have to bounce back and forth between Quicktime 7 and X because sometime this feature will work and sometimes it doesn't. There's no consistent reason I can figure out why the applications will or will not work properly. On some occasions I get some small 8Kb file. On other occasions, I only get the audio.
Any ideas?

Uhh, the system requirements for Photoshop CC state you need 2 GB RAM, 8 GB recommended. This is likely your problem.
Benjamin

Strokes on appearance is getting cut off when exporting for web & Devices

I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
Is there any setting either in illustrator or windows that may be causing this anomaly?

Try adding:
Effect >> Path >> Outline Object
So your type will still be editable
If that does not work you may want to:
Type: Create Outline
I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Using Quicktime's "Export for Web" feature in iWeb?

Greetings,
Does anyone know if this is possible within iWeb, that is, to use movies created using Quicktime's "Export to Web" feature, which really seems to deliver superior movie quality?
Much appreciated,
DaveB

Thanks, good stuff, though I'm still having a small problem with this. I'm getting a gray line around the top and left of my movie and the right side of the player is getting cut off. When I try to make the width larger, it just moves the gray line further to the left.
Any ideas?
http://www.brianderr.com/brianderr/copythis3.html
*This is the script that I added to the html snippet in iWeb.* I changed the height to 505px because it was cutting off the bottom of the player at 496.
<iframe src="http://idisk.me.com/brianderr/Public/KANYE%20PT%201/kanye1.html"
style="width:720px; height:505px";
scrolling="no">
</iframe>
*This is the script from my read me file that I kept:*
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>QuickTime Pro - Export for Web - KANYE PT 1</title>
<script src="http://www.apple.com/library/quicktime/scripts/ac_quicktime.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/scripts/qtp_library.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/stylesheets/qtp_library.css" rel="StyleSheet" type="text/css" />
</head>
<body><script type="text/javascript">
</script>
<noscript></body>
</html>

Using Color profiles and exporting for web browsers

I've been trying to figure out the answer to this question. As I'm sure you're aware Safari supports color profiles while other web browsers like Firefox do not. I would like to setup Aperture so that it displays and exports images for the widest audience possible. Unfortunately it embeds a color profile and my images on the web only display correctly in Safari. I've tried changing the proofing profiles and export settings to no avail. I didn't seem to have this problem in iPhoto, a picture there looked the same on screen as it did in Safari and Firefox but I can't achieve the same with Aperture...

Thanks for that information, unfortunately I'm not really any closer to solving the issue since I've already tried that. 1) by default, doesn't Aperture automatically embed the sRGB color profile? 2) if I set view>proofing mode to sRGB shouldn't what I see on screen match what a "dumb" application such as Firefox does when it ignores the embedded profile and display sRGB? I've tried going into the preferences>export settings and changed everything to sRGB IEC61966-2.1 but I see no difference in the final image between that and the default setting.
I guess my question is more specific to Aperture since I don't have this problem with other applications. For example, in photoshop if I do Export for Web it strips out any embedded profile and when I open that image in Firefox and Safari side-by-side they are exactly the same. But not so when I export an image from Aperture, when opened in Firefox it is desaturated and flat and of course in Safari it honors the embedded profile and looks fine.

Exporting for Web Usage

Hi. I have no doubt this has been discussed, but am hoping I can get a more concrete answer. I would like to export some shorts to put on my web site. I know there is a balance to be struck between quality and file size, but the choices that can be made with settings leaves me confused.
I am using the latest version of Final Cut Studio Pro. What are best settings based on people's experience to export for web usage? This would ideally be a quicktime file in the end.
Thanks.

I usually use Sorenson 3, quarter screen size and they usually come out pretty manageable. I would use the H.264 codec but I want to be sure all who come to my site and view the Quicktimes and some people don't have QT v.7 yet.
Allow me a shameless plug as well: http://www.scottsimmons.tv/
If you look at any clips on my site and save them as a quicktime movie, then open them an playback in Quicktime player, you can hit command + i and see the movie info where you can see exact specs on each clip. That can give you an idea of quality and file size. It's really an imperfect science.
G5 dual 2.7 Mac OS X (10.4.2)

Quicktime Export For Web files inaccessible

I accidentally posted this in the QT for Windows section, but I'm a Mac guy.
This is totally bizarre. As of this afternoon, all of the QT files (generated with Export for Web from QT7.6) that I've posted over recent days and weeks, on multiple servers, played back by different computers at different locations, running QT 7.6.4 and 7.6.6, OSX 10.5.8 to 10.6.3, WILL NOT PLAY. How is this possible?
If I connect directly to the original .mov file (as opposed to the "alias" .mov file generated by Export for Web), then it will play. If I connect to the .m4v file, my browser wants to download it, and then play it.
What's going on here? Apparently I'm not the only one to have this problem. Is this due to some sort of DRM update put in place on account of the iPad introduction? iTunes and QT have been updated on at least one of the computers I've tried this with, and it didn't make a difference.
Hello??? Is anybody out there?

Here are several examples:
Posted on March 12: http://vista.adventureadv.com/jackall/Aragon-proof1/index.html
Posted yesterday on my server:http://vista.adventureadv.com/jackall/cherry-proof1/index.html
Posted yesterday on my remote server (hosted by 1&1): http://www.adventureadv.com/cherry-proof1/index.html
In case you think I screwed up the original exported HTML file: http://vista.adventureadv.com/jackall/cherry-proof1/readme-cherry.html
http://www.adventureadv.com/cherry-proof1/readme-cherry.html
Direct link to the QT file: http://vista.adventureadv.com/jackall/cherry-proof1/cherry-720.mov
Also, the server named vista is a Mac server running OSX Server 10.4-something - despite its name, it is not a Windows Vista machine.

Export for web

Hi,
I wonder if Lightroom overs a "export for web"?
I saw that the jpg's with 50% are still larger than the once exported via PS-for web.
I wonder if there is any trick or....
thanks
R

Web galleries created by LR use more storage than those created by PS because (at least some) LR galleries have three images plus a thumbnail for each image file compared to only one image plus a thumbnail in PS. The three images are of different size; this may be how LR galleries match the displayed image size to the user's browser window on the fly, a neat trick.
Another area where LR needs some extra storage is the catalog. In the smallish sample I examined, importing a jpg file into LR increased the total storage required for the image by about 40%.
Jim

Quicktime Export for web

i have exported a video for web using quicktime and when i try to upload it, i wont play... i have the video uploaded (the actual .mov) but i dont upload another file that is exported (the .m4v) because is like 200MB and the .mov is only 4KB. how can i make the player on the web, play the .mov file instead of the .m4v? hope u understand... Thanks in advance.

How to make it smaller in file size than your original 5.5 GB file?
You just did when you used the "Export for Web" feature and it was reduced to 200 MB's in file size.
200 MB's is still much too large for Web use as your viewers will not wait for your file to download.
Break up your 25 minute "masterpiece" into 5 minute "chunks" or compress it further by using:
Export > Movie to QuickTime Movie
Reduce the data rate, file dimensions and choose H.264 video codec and AAC audio. Forget "stereo" to reduce that part of the file. Reduce dimensions to reduce the video part of the file size. Cut the "frame rate" by 50% to make even a smaller file size. Your Web viewers will probably not notice.
Do some tests with a one minute sample file to learn what works best for your file. Compare the new exports (side by side) by using the "Play All Movies" feature of QuickTime Pro.
After a few sample exports you'll quickly see which data rate, frame rate and video compression codec works best for your file.

Export for web problem

hi, i've used the export for web option in quicktime pro but all i get when trying to play the movie is the quicktime logo with a question mark.. note that this is locally on my imac.. i've also tried uploading the folder on my server and play it from there to no extend.. i dont know what's going wrong.. the files exist and im even able to play them by scrolling down to the bottom of the ReadMe.html and clicking on one of the versions links directly..
any advice?

QuickTime Pro can play audio from MPEG-1 formats but can't extract it during export.
Solution?
Use MPEG Streamclip (free) to convert the MPEG-1 to other QuickTime formats.

Question about file size when using "Export for Web"

Hi!
I created a .mov file and worked to get a great balance between file size and quality so that I could deliver it via the web and make it easier for end users to see the video on a slower connection.
My question: When I use "Export for Web," my .mov file is converted into a very large .m4v file--more than double the size of the original file. I know that this export option is to optimize the file for a wide variety of users/internet speeds. Am I correct in guessing that the end size is not an issue? I would post the .mov file instead, but I really like the option of embedding into a html page along with the "click to play" option.
Bottom line--is it better to post the smaller .mov file that i originally started with or to go ahead and link to the bigger .m4v file that was created with the "Export for Web" option?

"Export for Web" is a feature of QuickTime Pro and it makes 4 files and the html page code for easy copy/paste Web page editing.
The very first file is called a "reference movie" and it links to the other 3 files (56kbps, 900kbps and 1.5Mbps). It, and the page code, "read" the connection speed of the viewing hardware and "serve up" the correct file based on that connection speed.
In nearly all cases the "Desktop" version would still be smaller in file size than the original source. The times the file would "increase" in file size would be when an already compressed was used as the source file. You can find out more about your source file by opening it in QuickTime Player and viewing the Movie Inspector window information.
There are dozens of other html "tricks" that could be used if your source file is already compressed but you want a different display size:
Page code to show "aspect" or scale="tofit". This code allows values "outside" of those found in the actual QuickTime file be used for the Web page display. A 320X240 QuickTime .mov file looks pretty good at double size (640X480) but the file size would still be that of the source file.
"Poster Movie" is another html trick that loads the Web based file directly in the QuickTime Player application (bypassing Web page layout restrictions). These files are also known as "Presentation Movies".
Another method is the QuickTime Media Link file (.qtl). These are simple text based files that are used as a "direct link". These use simple XML (Extensible Markup Language) and are easily created in any text editing application. The simple syntax has amazing control over a simple QuickTime .mov file. You can launch (and quit) the QuickTime Player, display at other dimensions and even embed "links" inside the display.
Some of my files as examples:
http://homepage.mac.com/kkirkster/Lemon_Trees/ a "Poster Movie" style.
http://homepage.mac.com/kkirkster/.Public/RedneckTexasChristmas.qtl
A QuickTime Media Link file. A tiny file should download to the viewing machine, launch QuickTime Player, present the movie and it even includes a "link" to my Web page.
Edit: It appears you must now double click the .qtl download to launch QuickTime.

Adobe Flash Islands for Web Dynpro ABAP Data Binding problem

I have downloaded the NetWeaver 7.1 Trial (includes Adobe Flash Islands for Web Dynpro ABAP). I try to create a very simple FlashIslands component running within the Web Dynpro Application, everything looks good. However, all binding to the Flex component is not working. Does anyone know why?
Since it's trial version, I login as BCUSER into NSP system. When I load up the build-in sample, such as Chart Demo, the binding to Flex seems working. I suspect if it has anything to do with package? I could only create my Web Dynpro under the $TMP package, as all the build-in sample are defined in SWDP_DEMO.
Please help.
Alan

hi,
Check out this link. It will give you an idea how to integrate Aobe island comp with web dynpro.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480
Thanx.

HT201066 QTime 10.1 on OSX 10.7.5 export for Web doesnt include video , only audio

Bizarre thing.. QT will not export for web a vidoe with picture, just audio??

Here are several examples:
Posted on March 12: http://vista.adventureadv.com/jackall/Aragon-proof1/index.html
Posted yesterday on my server:http://vista.adventureadv.com/jackall/cherry-proof1/index.html
Posted yesterday on my remote server (hosted by 1&1): http://www.adventureadv.com/cherry-proof1/index.html
In case you think I screwed up the original exported HTML file: http://vista.adventureadv.com/jackall/cherry-proof1/readme-cherry.html
http://www.adventureadv.com/cherry-proof1/readme-cherry.html
Direct link to the QT file: http://vista.adventureadv.com/jackall/cherry-proof1/cherry-720.mov
Also, the server named vista is a Mac server running OSX Server 10.4-something - despite its name, it is not a Windows Vista machine.

How do I batch "Export For Web" from Quicktime, one at a time

I have 20 quicktime movies in folder A.
I would like to "Export for Web" for all 3 options (iPhone, iPhone (cellular), and Desktop) to folder B.
How do I create an automator script to complete this action one at a time, until they are finished converting?
Also, I do not want to delete the originals.
I have never used Automator, but I'm guessing it should be easy to execute a shut down command when it is done...
Thanks a lot!

iTunes does not handle the import of photos/videos from the iPhone's Camera Roll.
If this is not the computer you sync your iPhone with, you should have been provided a warning message that your iPhone is associated with an iTunes library on another computer and when trying to transfer any iTunes content from a different computer, a warning message is provided indicating that all iTunes content on the iPhone will be erased first.
When connecting an iPhone to iTunes on another computer, none of the options under the various tabs for the iPhone sync preferences with iTunes are selected automatically. This means you had to select Sync Contacts under the Info tab for your iPhone sync preferences with iTunes on your wife's computer.
Assuming you are syncing contacts with a supported address book app on your computer, connect your iPhone to Tunes on your computer and without syncing, under the Info tab for your iPhone sync preferences below the Advanced section, select Contacts for replace info on this iPhone followed by a sync.
For importing photos/videos from the Camera Roll which can be done with a computer that is not used for syncing the iPhone since syncing with iTunes is not involved.
http://support.apple.com/kb/HT4083

Optimal FLash export for web ??

Similar Messages

Maybe you are looking for