Optimal MB per minute encoding

Hi,
I have an 8 minute DVD (VOB file 550 MB) clip which I want to
encode in Flash and put online.
I want the quality of the audio and video to be reasonably
good but I don't want the file size to be too large.
Is there an optimal, recommended or happy medium file size
per minute ratio -- a MB per minute -- that I can use as a guide in
optimizing my Flash file.
I would appreciate any assistance in this matter.
Thanks.

Thank you all for your advice) arrived in stores Apple, since I bought it from the Online Certified Refurbished then change it to a new me could not, and of Certified Refurbished they did not have a monitor. So I whole amount I have spent on the monitor on a gift card from Apple, and I bought her a new monitor (plus pay extra 212 dollars)

Similar Messages

Requests per minute in idle conditions in EM

Hello Gurus,
We are having an issue where in our Financial Reporting server is going down after throwing an Out of memory error in the logs in Weblogic.
We have been monitoring the Financial Reporting service in the Weblogic console and in the Enterprise Manager to see the performance and have observed the following --
- Initially the Heap free percent in the Financial Reporting server is staying at 70 - 80 percent for some time immediately after the services are started.
- The heap free percent keeps on going down as the time proceeds.
- The heap goes to 0 and ultimately the services goes into shutdown state in weblogic and becomes unaccesible.
We also observed that the Financial Reporting service shows requests per minute to 80 in the env where we are facing this issue, however it is showing as 0 in the other env which are exact replica - http://s15.postimg.org/bt756hvuj/NEW_PROD_FR_in_Enterprise_Manager_Idle_Condition.png
If someone can point us on what we need to check that would be great. as we are not sure as to why the request per minute will be around 80 in idle conditions.
Any help will be highly appreciated.
Thanks,
hyperionEPM

Sid_Middleware wrote:
Hmmm... you can always try to boot up weblogic with more memory. Look at $DOMAIN_HOME/bin/setDomainEnv.cmd (or .sh in unix) and check for MEM_ARGS variable which specifies memory settings. Double the memory requirements and restart weblogic and see what happens.Increasing the memory is not a concern here, but the thing is that it keeps on going down even when our servers are idle.
Also, what is Requests (per minute) as shown in the screenshot and do you know why the Requests (per minute) is showing around 80 even when there is no work going on?
We have other environment which are again idle and the value is 0 there.
Thanks,
hyperionEPM

Throttling a file adapter to consume a max number of files per minute

Is there a way to design a file adapter to throttle its processing bandwidth.
A simple use case scenario is describes as follows;
A File Adapter can only consumes a max of 5 files per minute. The producer average throughput is 3 files per minute but during peak times it can send 100 files per min. The peak times occur during end of year or quarterly accounting periods. If the consumer consumes more than 5 files per min the integrity of the environment and data is compromised.
The SLA for the adapter is to :
- Each file will be processed within 2 seconds.
- Maximum File Transactions Per minute is 5
An example is as follows.
The producer sends 20 files to its staging directory within a minute. The consumer only processes 5 of these files in the first minute, sleeps then wakes up to consume the next 5 files in the second minute. This process is repeated until all files are processed.
The producer can send another batch of files when ever it likes. So in the second minute the producer can send another 70 files. The consumer will throttle the files so it only processes 5 of these files every minute.

Hi,
If you have a polling frequency set to 2 secs..then controlling it to read only five files a min is difficult.?You can have the polling frequecy changed to 12secs
or u can schedule a BPEL for every min and use synchronous read operation and loop it 5 times to read 5 files.

How do I count and display events every few seconds and then convert the counted values into events per minute? (for a heart rate monitor)

Hi everyone,
I'm building a heart rate monitor as a final year project with my lab partner using the NI USB-6009 and Labview 2009. We have managed to obtain a signal using a photo transciever, smooth it out and count the events, however the count is incremental.
We wish to count the number of pulses we obtain for a few seconds (5-10 for example) and then use this value to obtain a pulse rate in beats per minute (e.g. 10 pulses in the first 10 seconds would give an estimated BPM of 60 etc etc).
Does anybody have ides on how we could implement this? We have tried timed loops, elapsed time VI's and other things but nothing gives us what we need.
Thanks in advance for any help that is offered.
Jeshua Graham.

We are very new to Labview. We are taking a raw signal from our DAQ and then using VIs to filter and then trigger counts on rising edges. I have attached our vi file to this post for you to look at (I hope that is what you mean by code).
Attachments:
TCRT-1010DAQ_jeshua1.vi ‏367 KB

How can i figure out the beats per minute of all the songs on my itunes list?

I am a runner and would like to know the beats per minute of each song on my playlist. Is there any app that is compatible with itunes so that I could get this information and easily upload it?

The mentioned BeaTunes is nice... I've also used Tangerine. You'll find that scanning one song with one app and scanning the same song with a different app will produce different results. I'd just recommend being consistent and using the same app once you'd played with them to determine your favorite.
Mixmeister also has a few different levels of software for DJ type stuff.

Not all BPM's (Beats Per Minute) from ID3 tags show in iTunes...

I have a few thousand MP3's on my computer that I use for DJing, with Traktor software. The software analyzes the MP3 files to get the Beats Per Minute of the track, and then writes the ID3 information to the file.
My problem is that in iTunes, only about 60% of the files' BPM's from the tags show up in the BPM column, and I'm not sure why. The rest just come up blank, even though I know for a fact that the BPM of the tracks is in the file (when I move the files to my 2nd machine and I ask Traktor to read the tags, all the info is there).
Is there some kind of way to make iTunes re-read the ID3 tags so it'll finish the job?

I used a program called beatunes with the same result. Beatunes will only call back BPM on songs I have loaded from CD's - not songs I have purchased thru itunes. Could be your issue too --- I will let you know if I find a resolution.

Spotlight crashing hundreds of times per minute

On my new 13" Retina MBP, spotlight is crashing hundreds of times per minute, resulting in more or less complete CPU use by the crash reporter.
The console logs are full of this:
4/4/14 7:08:27.925 PM mdworker[22407]: (Fatal) Worker: Uncaught exception: 'NSInvalidArgumentException', reason: '-[__NSArrayM indexOfObjectWithOptions:passingTest:]: unrecognized selector sent to instance 0x7fea98409680'
Stack: (0x7fff8703e244 0x7fff8bc28e75 0x7fff8704112d 0x7fff86f9c3f2 0x7fff86f9bf78 0x100964ea0 0x10096265b 0x7fff8f0ca899 0x7fff8f0ca72a 0x7fff8f0cefc9)
Spotlight restarts itself and crashes again faster than once per second. I have to turn it off with launchctl. Trying to open one of the crash report logs from Console.app crashes Console.app, so that's good too.
The issue seems to come and go. The machine will work for a while fine, then at some point I'll notice the fans have spun up. When I turn it back on later, sometimes it starts right back up, sometimes it works for a while.
Really frustrating! I want spotlight back. I can't find anything about this on google. Any pointers?

Back up all data.
Triple-click anywhere in the line below on this page to select it:
/.Spotlight-V100
Right-click or control-click the line and select
Services ▹ Open
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You'll be prompted for your login password. Restart the computer, empty the Trash, and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help ?
The fist Backup use for 260GB 15hours!
The Wifi ist Bridge configured.

We are still learning the quirks and bugs of this new box..
See the info here.. use accounts rather than disk or device password.. what happens.
https://discussions.apple.com/thread/5146963?tstart=0

What is the normal % per minute charge rate of the iPad (3rd generation)?

Recently I've been experiencing some issues with the battery on my iPad. Even when plugged in to the charger, the battery goes down if I'm doing something processor intensive, and only charges at a rate of less than 1% per minute while in sleep mode. Has anyone else experienced this problem? Should I take it into the apple store?
I first noticed it this morning when I left it on the charger all night and it was only at ~38% charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Price per minute of Flash animation?

Hi,
I need to create 2 minutes of animated info graphics in Flash. What is the general formula for price per minute of Flash animation? I know it varies, though this would be high-end animation requiring lots of things to be animated, such as bar graphs, etc.
Thanks,
Dan

You're right. It totally varies. Might be better to estimate how many hours you think it will take to complete and then decide on your price per hour.

Archive log filling up a gig per minute

Hi there,
No one is on the database amd every day now the archive log is filling up over a gig per minute so when I get in work in the morning the backup didn't run and the archive directory is full and the database is not available.
This has been happening for the last 6 days and I can't figure it out. I have to keep clearing out archive files to get the directory percentage down so a few users can run some reports.
This database is not growing at all. There is no data being added to it, its a histrical database for report running only.
Here is the file system, as you can see, big drive so I am at a loss.
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3.1G 829M 2.2G 28% /
/dev/mapper/VolGroup00-LogVol_USR
4.0G 3.0G 813M 79% /usr
/dev/mapper/VolGroup00-LogVol_d01
160G 116G 36G 77% /d01
/dev/mapper/VolGroupBackup-LogVol_Backup
213G 195G 7.6G 97% /backup
/dev/sda1 99M 11M 84M 11% /boot
none 1.5G 0 1.5G 0% /dev/shm

user13286861 wrote:
Hi there,
No one is on the database amd every day now the archive log is filling up over a gig per minute so when I get in work in the morning the backup didn't run and the archive directory is full and the database is not available.
This has been happening for the last 6 days and I can't figure it out. I have to keep clearing out archive files to get the directory percentage down so a few users can run some reports.
This database is not growing at all. There is no data being added to it, its a histrical database for report running only.
Here is the file system, as you can see, big drive so I am at a loss.
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3.1G 829M 2.2G 28% /
/dev/mapper/VolGroup00-LogVol_USR
4.0G 3.0G 813M 79% /usr
/dev/mapper/VolGroup00-LogVol_d01
160G 116G 36G 77% /d01
/dev/mapper/VolGroupBackup-LogVol_Backup
213G 195G 7.6G 97% /backup
/dev/sda1 99M 11M 84M 11% /boot
none 1.5G 0 1.5G 0% /dev/shmRun off a statspack report and post the "Instance Activity", "Top 5" and "Load Profile" sections here. Don't forget to use the "cost" tags to get the output in fixed font (see end of post).
Question 1 - what did you do 6 days ago ?
Question 2 - what method are you using for backups.
Guess 1 - you have a load of tablespaces in backup mode, and you're doing a lot of delayed block cleanout.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)

Can you slow the scan rate of VI Logger scans per minute

Can you set up a logging task with VI Logger to log 1 scan per minute? I'm using a DaqCard AI-16E-4 and SCXI 1120 Module.

What do you mean by VI Logger? The easiest way to do what you need is to create a while loop and put in it one of NI's "easy-IO" analog input VIs and a wait function set to 60,000 milliseconds. Depending upon the acquisition VI you use the result would read either one point, or a set of predefined points once a minute. (see attached code)
How much more complicated the application would get depends on such things as what exactly you want to do with the data, and how you want the user interface to react. For example do you need to save the data? If so, you'll need to add a file save function to the loop too. Also, the simple version I attached could take as long as 2 minutes to quit once you press the stop button--which probibly wouldn't be acceptable.
The point is that the basic functionality you asked for is very easy to do. The complicated part is defining all the other stuff that wraps around that simple functionality.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
daq_demo.vi ‏19 KB

ITunes 7 - Beats Per Minute (BMPs)

I am trying to find a way to update all my music downloads in iTunes 7 with the BPMs of each song so I can create playlists for the gym with songs of a similar speed and beat.
So far I have clicked the View menu and picked View Options which allowed me to tick the show - Beats Per Minute box.
I can only find around twenty tracks in my iTunes Library which include the beats per minute.
Is there a way of finding this information or does it have to be included on the album when you download it?

You could try one of these apps; sadly iTunes itself won't analyse or provide the BPM for each track itself.

Audition - Multitrack - beats per minute ändern

Ich habe aus verschiedenen Liedern mir ein neues zusammengestellt. Dieses möchte ich nun schneller bzw langsamer laufen lassen. Ich kenne es so, dass man irgendwo die Einstellung beats per minute hat und dort kann man dann eine bestimmte Geschwindigkeit angeben. Das Lied wird dann auf die neue Geschwindigkeit umgerechnet und ist dann kürzer bzw. länger. Wo finde ich denn so eine Einstellmöglichkeit im Audition? In den Eigenschaften des Multitrack gibt es zwar die Angabe beats per minute, man kann es auch ändern, aber ich kann keine Veränderung meines Liedes feststellen. Was mache ich verkehrt?
Vielen Dank schon mal im voraus
Susanne

Tempo changes in CS6?
Adobe Audition Help | Navigating time and playing audio

I Tunes Beats per minute

Is there a way I can track and calculate beats per minute on my I tunes lists.?

You need to edit the audio file of the song to speed a song up. If you have GarageBand '11 on your mac, try this:
SPEDING UP SONGS

Optimal MB per minute encoding

Similar Messages

Maybe you are looking for