Optimization of raw material while issuing from the stores

Dear Techies,
I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
I will explain this with an example.
Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
Is there any possibility in SAP that I can address this situation.
Thanks In advance,
With best regards,
Kiran.

Hello,
according to my knowlege it is not possible in SAP.
you have to create interface with Softwares like PRO-E sheet metal.
Regards
AM

Similar Messages

  • I purchased a tv show from itunes.  While downloading from the store it shows in the video list, when done, it disappears. what is happening?

    I purchased a tv show from itunes.  I can sync to my iphone. I tried to sync to ipod touch 4gen. Sync seems to be fine, but the video doesn't show up.  While downloading from the store it shows in the list, when done, it disappears. what is happening?
    I finally figured it out.  I had the parental controls restricting videos on my son's ipod.  Once I changed the restrictions, the videos appeared.

    http://www.apple.com/support/itunes/store/download/
    Fill out a customer service request, they will respond. I had a problem with my account and Apple was very helpful.
    BTW... the store is still down.

  • Problem while issueing from batch

    Dear Gurus
    Suppose I have got a finished product x for this I have maintained a bom of suppose a, b,c all three roh.Out of these 3 I have say c batch managed. Through mb1c suppose  I recieved roh c in different batches and kept them in the store.Now after creating production order in the order bom I am mentioning batch for the material c i.e I am telling from which batch it should issue.While issueing from mb1a to the order if I issue full quantity of c then the sytem is doing it without any problem from that batch that I mentioned in production order.If suppose I issue partial quantity of c then also it is taking but if I again try to issue the rest of the partial quantity the system is giving the error message 'issue quantity is greater than the reservation quantity'.For other roh which are not maintained in batch the system is allowing  to issue as many number of times as required up to the reservation quantity.
    Please tell me the reason why it is behaving like this
    Regards
    Sandip Sarkar

    Hi,
    As per the scenario given by you, you are not using the Automatic Batch determination Process for system to check the stock of BOM item material and assign the btach in Production order.
    You are assigning manually the btach number in the production order component overview against the component. As you are not issuing the material in a single storke system is giving this message.
    As suggested by Brahmankar you can either set the message as "Warning"  OR  "Balnk (No Information)"  in Tcode : OMCQ and then try issuing the material against the production order in partial qualtities.
    Hope this will help you.
    Regards
    Rdahka mk

  • DPM encountered an error while reading from the recovery point used for recovery.

    Hi Guys I'm getting this error:
    DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
    selected a share for recovery, the path to its contents is missing from the recovery point.  (265)
    The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
    The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
    The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM.  the C Drive is fine.  the D and E Drive are different
    in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
    I've removed the Protection from drives D and E and reinstated it but every recovery point created
    brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

    Hi,
    It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
    See the DPM supported and unsupported scenarios
    here under the deduplication issues section. 
    We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
    KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
    Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
    Data Protection Manager2012 R2 is installed on Windows Server 2012.
    Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
    This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

  • Message failing in SXMB_moni----Error while reading from the secure store

    Hi,
    The scenario is as below
    A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
    The message is failing in sxmb_moni while trying to write the file in the folder.
    The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
    Below is the error seen in moni.:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    Below is Trace log:
    <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
    <Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry  changed:  / (SECSTORE,031) </Trace>
    <Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine  </Trace>
    </Trace>
    </Trace>
    <Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
    Is this because  PI system is a system copy of another system ?
    Regards,
    Sneha

    Error while reading access data (URL, user, password) for the Adapter Engine
    Check out Michal's reply:
    Re: URL for Central Adapter Engine
    As you said there was a system copy it may be the case that some things were not configured properly

  • Error occured while reading from the device

    I need help!!! whenever i try to update my iphone to the new 1.1.1 version, i get an error message saying "error occured while reading from the device" the same message comes up when i try to restore it. i havent mod'd my phone in any way. does anyone know whats wrong or how to fix it?

    I have the same problem. Was a solution ever given ?

  • "An error occurred while restoring from the backup.Files can't be restored"

    My 4 month old MacBook Pro 15" running 10.6.2 lobotomized itself and I had to have a new HD put in it. I backed up the old one w/ TM on an external HD. I've tried (by the book, and with direct verbal guidance from the Help People at Apple) to restore the system and files but every time it gets to 10.2% in the restoration process and then I get this message: "An error occurred while restoring from the backup. Please restart." and under the frozen progress bar is the chilling line: "Files can't be restored." I've tried restoring from several dates on the TM backup list but it always stops at 10.2% completion. Help!

    Hi.
    Start by booting from your SL install disc, and selecting Utilities from the menubar, but before going on to +Restore System from Backups,+ instead select +Disk Utility.+
    Make +*absolutely certain+* that your internal HD has the GUID *Partition Map Scheme* and the +Mac OS Extended (Journaled)+ Format (unless you're sure it should be +Mac OS Extended (Case-sensitive, journaled).+
    Then do a +*Repair Disk+* (not permissions) on your Time Machine drive.
    If that succeeds, quit Disk Utility, then continue with the full restore (per #14 in the FAQ).
    But if that finds errors it can't fix, it's possible that +Disk Warrior+ can fix them. It's about $100, and is probably a good long-term investment, but there's no guarantee.
    If all else fails, go back to Disk Utility and erase your internal HD, then install OSX. When your Mac restarts, use +Setup Assistant+ to transfer your users, apps, settings, and data from your backups (see #19 in the FAQ).
    Then download and instal the "combo" update to get back to 10.6.2. Info and download available at: http://support.apple.com/kb/DL959 (or http://support.apple.com/kb/DL1017 for 10.6.3).
    Be sure to do a +Repair Permissions+ via Disk Utility afterwards.

  • While reading from the pl/sql cursor i got "Invalid column index" exception

    Hi,
    I got the "Invalid column index" exception while reading from the cursor.
    Please advice.
    Thanks in advance
    siva

    I suppose one (or more) index in your query is in a bad state.
    Possible solutions: rebuild (with 'ALTER INDEX <index> REBUILD ...')
    drop and recreate (it's the same as above, but a little more long)

  • Error occurred while restoring from the TimeMachine backup

    I have an brand new HD that I want to restore from TimeMachine.
    Erased and partitioned this brand new drive.  Created 2 partitions and formatted as “OS Extended Journaled/ GUID.”
    Did a “Command R recovery boot” and went through the steps to backup from TM to my new HD.
             15 seconds into the restoration process Msg. reads: 
    “Error occurred while restoring from the backup.
    Restart your computer and then try restoring again.”
    Trouble shooting:
    Luckily my original files and initial boot drive that TM was backing up from remains fine and I performed some more TM back ups as well as a TM backup onto another drive as well.
    I even tried restoring to another empty drive with older backups and backups off of another HD and got the same error message.
    All my BU’s and BU attempts have been within 10.7.3 on the same MP.
    Thank you in advance for any help!!

    These are the four hard drives I am using for troubleshooting:
    1. Internal new 1TB drive
    2. External erased and reformatted 500GB firewire drive
    3. Internal original 500GB drive designated for TimeMachine with               
    ~200Gigs of successful backup (Including entire bootdrive)
    4. External erased and reformatted 300GB drive that I told              
    TimeMachine to back up to for testing purposes.
    I have only erased and reformatted the first 2 empty drives to use as a future boot drive once I can finally restore from my TimeMachine files to one of them successfully.
    My troubles all started when I couldn’t get my cpu to boot from my initial boot drive.  That’s what has put me on this track.  I have since repaired that boot drive with DiskWarrior to perfect order.
    Through a lot of my trouble shooting, I have left that initial boot drive in but have since taken it out.  I don’t have lion installed on any other drive.  Again, my 2 test drives are empty.
    I don’t know how long this old boot drive will remain in perfect order and am glad I have found that I cant use TimeMachine on this side of needing it desperately.
    Pondini- Thank you again for hangin' in there with me.  I think I understand your last recommendation: 
             Do I load a new copy of Lion from this location?:
    http://itunes.apple.com/us/app/os-x-lion/id444303913?mt=12&ls=1
    The suggestion of “coping the installer” is to have a hard copy like I used to in SnowLeopard etc. for a faster future install?

  • I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

    i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
    See if that fixes your problem.

  • Anyone experienced an issue with 'insufficient privileges' notification in the current iTunes when trying to download from the store or import a CD?

    Since changing iTunes to the current version, I've experienced an issue when trying to either download from the store or import a CD.
    I keep getting a pop-up message that says I have insufficient privileges to perform the action.
    A bit weird as I'm the admin for the iMac.
    Anyone else seen this and know a fix?
    Thanks.

    I've also come to the conclusion that this is a router problem, as I don't have this issue at all when I'm at work.
    It's a old router, and we've had problems with other devices not wanting to connect to it in the past.
    I'm sure theres some way to solve this issue, but I think, rather then sittin gon hold, to figure this issue out, and my router having issues prior to this, I'm just going to pick up a new router at this point.
      I hope any of this has helped someone get their issue, at least temporarily solved.

  • Problem with iTunes purchased track.  I purchased an album from the store and downloaded.  I contacted support as one track was defective and had this one track setup to re-download, which was successful.

    I purchased an album with 11 tracks from the Store.  When the download was complete, I edited the name to make it easier for me to find. I then synced my iPod and iPad with the new album.  However I found that one of the tracks was defective and after writing to the support community, a second download was setup and this fixed the bad track.  I was surprised that when the track downloaded, it went to the track with the new name.  However it works perfectly on my computer.  For some reason, the iPod and iPad have synced a few times but the track for this album on these is the original track with the defect and this has not fixed, though there have been multiple times that it has synced. The laptop with its corrected track works fine.
    The message from support told me to be sure that the software on my laptop was the current version and I did correct this before getting that corrected download.  However I notice that my iPod says that it has the latest version and won't check for an update until 2/24.
    Can you help me figure this out.  I thought if I could delete this track off the iPod and iPad that it would sync the correct version, but I can't see how to delete these.
    Thanks for any help you can offer.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
    See also:
    HT5085 - iTunes in the Cloud and iTunes Match Availability
    HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

    I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • How do I opt-out of recieving email receipts for free items from the store?

    Hello,
    Currently, when I download free apps from the store I will eventually receive weekly receipts from e-mail. While useful on purchased items, I treat this as spam for free items.
    How do I opt-out of this for free items?

    I'm not aware of any setting to prevent the Apple's receipt to be sent.
    If you bought a mix of purchase item and free item, the will appears on the same receipt. Instead of considering them as spam, you can consider them as "a way to recall which apps you dowloaded in case something wrong happen".
    Personally, I have created a folder called "receipts" and simply send these mails to this folder.

Maybe you are looking for

  • Droid RAZR (not MAXX) 4G, service drops on GB and ICS

    Okay, the forums are full of threads concerning this issue. The phone loses data connectivity as well as voice. Every person seems to have a different opinion as to when or where their service drops, and I have tried to find a fix (official or not) s

  • Mac app store still doesn't work properly

    Hi any concern, Thank you before,has been almost 3 week.Yesterday I did Re-install OS X take almost 20 hours and then restart automatic around 6 am.But still when I click (update),(Install),(get) or any buttons doesn't work at all this happen on Mac

  • How do I re-establish Events in iPhoto 11?

    I have a Macbook Pro running 10.7.4 w/ a 2.66 ghz intel core i7, 4 GB of memory and am currently using iPhoto 11 9.3.1. I recently upgrade from iPhoto '09 8.1.2. I was using iPhoto '09 to import pictures from a card, Upon completion all my evnts were

  • SQL Server 2000 and JDBC,Registering cursor as OUT param

    hi I am using JDK1.4,SQL Server 2000 and Microsoft's JDBC driver. I am stuck in accessing cursors. The SP i wrote is USE pubs IF EXISTS (SELECT name FROM sysobjects WHERE name = 'spSelectEmployees' and type = 'P') DROP PROCEDURE spSelectEmployees GO

  • FB01 or FB60

    Hi all, While posting invoice i.e FB01,fb60 and FB70 with tax code getting below dump and without tax code we are not getting dump. untime Errors         SAPSQL_INVALID_FIELDNAME xcept.                CX_SY_DYNAMIC_OSQL_SEMANTICS ate and Time