Optimization run terminated with errors /SAPAPO/OPT012

Hi All,
While running the PPDS Optimizer I am getting the error "Optimization run terminated with errors /SAPAPO/OPT012" . ..
I had check the Connection in SM59 for the Optimizer server and it is working but still i am getting this error.
Optimization get terminated without run.
any pointer Please.
Regards,
ketan

Dear Ketan,
Maybe note 1097169 can be referred to. Partially fixed campaigns can lead to the failed optimization run - that this
will somehow throw error OPT012, etc.
BR/Tiemin

Similar Messages

SNP Optimizer run ends with error: Error when determining Customizing data

Hi All
Can you help please what settings are missing: SNP optimizer run canceled with error "Error when determining Customizing data".
Thanks
Best Regards
Andrey

On integration tab of SNP optimizer profile,
maintain 'regard as customer demand' for both dependent demands and distribution demands for fixed orders.
By default it is 'regard as hard constraint' which should be changed.
bye,
Nitin Thatte

Actual Cost Process request run terminated with Error Signal 11

Hi All
Could not run Actual Cost Process as it is terminated with error signal 11. Please tell me the reason/cause if any one has come across this error before in your cost running process. Thanks in advance for your valuable suggestions.
I am using PPAC cost method and on Release 11. I search in metalink and Apply Patch 5208603, 5475347 but But failed
Pls Help me???

Hi,
Were you able to relink the executable file via adadmin successfully?
Please see if these documents help.
Note: 402805.1 - Actual Cost Process Fails With Error Message 'Signal 11'
Note: 402829.1 - GMCACOST Actual Cost Process Completes In Signal 11 Error After Applying Patch 5386789
Note: 375764.1 - Actual Cost Process terminated with Signal 11
Note: 389970.1 - Actual Cost Process erroring out with Signal 11
Note: 338230.1 - Actual Cost Process Failing With Signal 11 Error while processing inventory transfers
Regards,
Hussein

ORA-00471: DBWR process terminated with error when running mrua.pl

we are upgrading to Portal 10.1.4 from 10.2.0.2.
Right in the middle of the upgrade scripts running get ORA-00471: DBWR process terminated with error...
Any suggestion?
TIA

sorry, it is me agin:
I forgot:
it must a trace file produced by PMON because it was PMON who killed the instance.
These background processes function as watchdogs for each other. If one finds that one of the others is missing it will kill the instance.
Regards,
Lutz

/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12

Hi Experts,
We have made a system copy from Production to Quality and it has been done successfully. Now we are able to open the database manually. But when we are trying to start SAP it is not connecting the database base and it is giving error which is given below :
/home/qasadm/startdb.log
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:45:40 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
^C
root@bsltest # tail -f /home/qasadm/startdb.log
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Apr 12 10:55:53 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Apr 12 10:56:22 IST 2010
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Apr 12 10:56:22 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:56:42 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
Kindly see the logs and request you to kindly help us how it will resolve this issue.
Regards,
Jitendra

We have made a system copy from Production to Quality
After client copy sap schema had been changed thats why its not connecting.
fyi: Client copy and system copy both are different
schema had been changed thats why its not connecting
This is one of the post installation step after doing a system copy(reffer the ssytem copy guide)
Problem has resolved
Great, suggest you to close this thread
Regards,
Nick Loy

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'

hi all
i am using Application server 10g R2 while running report i am getting the following error
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
i configured the Reports_Path
with C:\windows\fonts if anyone faced the same problem plz help me.

hi
if you have problem you can post your own thread and we will try to help you.
sarah

Terminated with error: REP-300: ORACLE error occurred

We have OAS 10g on solaris.
When trying to generate a report we get the error : Terminated with error: REP-300: ORACLE error occurred
The report has been running fine until yesterday and today we are getting the error. I did not find anything relvant in metalink.
And no changes have been to the report.
Can anybody suggest me what to look yet or any possible things that might cause the error. The tracing is not enabled.
Thanks

Found out it was a data error.
thanks

Terminated with error:REP-56048:Engine rwHighEng-0 crashed

Hi Friends,
When i run a report using Oracle 10g IAS,i get an error:
'Terminated with error:REP-56048:Engine rwHighEng-0 crashed'
Anybody have the solution to handle it.Pls help!Thank you very much!

Hi to all,
Since the last couple of days we are having a problem with Oracle Reports.
Whenever we run these reports, it behaves erratic.
The report comes normal for the first few reports, then suddenly the server gets hanged and no reports can be generated.
OS on Application server is Windows Server 2003.Os on client machine is XP and Vista
Error is as below in Application Report Server status
Terminated with error: REP-56048: Engine rwEng-0 crashed, job
Any immediate help is appreciated
Thanks
Nilesh

Terminated with error: br REP-56048: Engine rwEng-0 crashed, job Id: 5778

while running report i m getting following error
Terminated with error: <br>REP-56048: Engine rwEng-0 crashed, job Id: 5778
I m unable to trace what is wrong currently i m using report application server 10.1.2.3.0 and delimited as desformat.
I have already used jvmoption and delimiteddata.
but both failed to solve the problem as jvmoption does not work in my case and delimiteddata has expected format problem.I want to use delimited option so what is the problem with engine that it crashes on the few reports.
regards,
kaushal

How many MB of SGA + PGA is assigned its BD?
Do the following:
1. It is necessary to modify the engine definition to include :
jvmOptions="-Xmx512M -Xms128M -Xss512k"
How to do it, depends on the version of Report Server in use :
a. For version 10gR2 (10.1.2.x) :
Backup your Reports server .conf file and Modify the rwEng parameters and add :
jvmOptions="-Xmx512M -Xms128M -Xss512k"
b. For version 11g (11.X), this has to be done through Enterprise Manager. In Enterprise Manager, locate your Report Server and go to "Basic Configuration" page then insert :
-Xmx512M -Xms128M -Xss512k
into the field "JVM Options" and "Apply" your changes.
* The important option is "Xss" that sets the maximum stack size that can be used by C code in a thread.
3. Restart your reports server and try to run again with DESFORMAT=SPREADSHEET

The report terminated with error: REP-501: The specified database cannot b

Dear All,
We are usning forms and reports 11g in weblogic . while running the reports from forms
frequently getting the error The report terminated with error: REP-501: The specified database cannot be connected..
Can anyboby help me to solve this problem

REP-501 typically means that Oracle Reports are unable to locate any available Oracle Databases. By default, Oracle Reports (similar to Oracle Forms) will only look for available databases in tnsnames.ora. Not only that, but the Reports environment by default will always look for the tnsnames.ora file in %ORACLE_INSTANCE%\config ($ORACLE_INSTANCE/config in Unix). I have seen these scenarios happen before especially if the TNS_ADMIN variable for your Forms environment variables is a directory different from %ORACLE_INSTANCE%\config. This would be the first place I would look.
If tnsnames.ora is located in %ORACLE_INSTANCE%\config, do all generated reports fail with this message or a select amount of them? If only a select amount of them, are there any similarities with these reports (e.g, size, parameters, etc.)?
Thanks,
Scott
http://pitss.com/us

Terminated with error: br REP-501: Unable to connect to the specified

Hi,
My report server can function nicely, always I can retrieve my report but I am also constantly facing the error when running report after a few minutes having my report servers on function.
Terminated with error: <br>REP-501: Unable to connect to the specified database.
I have 2 oracle home in my server, 1 is 9i (used for ODBC to connect to my database) and 1 more is 10g where my application server is.
My both my TNS files have all the entries of the database server. In fact, we gets reports perfectly OK without problem until a certain time when the error pops up.
Pls help

I did not check the timeout because all reports were generated within seconds.

Terminated with error: br REP-501: Unable to connect to the specified data

Dear All,
Oracle DB 10g installed on Windows 2003 Server machine and client is Windows 7 Pro. Forms are running fine. If I run report by puting everything in URL it is also giving result. But only when i am trying to call report via form I get an error REP-501: Unable to connect to the specified data. The report log file contains below result. Is this something to to AUTHID=ANONYMOUS??? I need your assistance in this regard as I have been facing this problem since quite a long time now.
[2011/10/22 3:55:55:34] Info 56013 (ConnectionManager:release): Connection 0 is released
[2011/10/22 3:55:55:34] Info 50132 (JobObject:reset): jobid = 72 Get command line: REPORT=E:\AuditSys\twoconsecutive_estimate.jsp USERID=AUDITSYS@customerdb P_USERID="MAJAN" P_REPORTNAME="Bills which have been estimated for 3 months consecutively" P_REGIONCODE="" P_TARIFF="" P_PRIGOV="" P_AREAFROM="2" P_AREATO="91" P_BILLMONTH="9" P_BILLYEAR="2011" P_MONTHS="3" BATCH=YES DESTYPE=cache DESFORMAT=HTML AUTHID=ANONYMOUS
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 72 is 0
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): jobid = 72 is in current queue
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Calling findDuplicatedJob for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): No Duplicate jobs for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job 72 is Enqueued
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:firstToRun): job 72 is first to run
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Trying to get engine for Job 72
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): Target max engines = 1
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 is used = true
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 state is 1
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Job 72 got Engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Job 72 calling setCommand on engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 5
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Send job 72 to engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:96] State 56016 (JobManager:updateJobStatus): Job 72 status is: Terminated with error:
REP-501: Unable to connect to the specified database.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:notifyWaitingJobs): Master job 72 notify its duplicated jobs.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 72
[2011/10/22 3:55:55:96] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/10/22 3:55:55:96] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/10/22 3:55:55:96] Exception 501 (): Unable to connect to the specified database.
Thanks,
Zia

Dear guys, it is quite an urgency here and I am not getting any clue from anywhere else .... please give me some tips to handle the issue if anybody has some...
Regards,

SAP not starting after crash: Terminateing With error code 12

Hi,
After system crash SAP is not starting normally. When running startsap under SIDadm puts out: /usr/sap/TST/SYS/exe/run/startdb: Terminateing With error code 12
startdb.log shows that:
/oracle/TST/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shares object file: No such file or directory
I have checked - file and directory are present.
However - when manually starting DB under oraSID and then logging in as SIDadm and starting SAP - everything starts normally.
(Allthough SID is has been changed before - system also worked normally after SID change) I have checked userrights and groups , also profile - everything seems to be normal. Any ideas?
Edited by: Kristjan T on Mar 16, 2011 1:16 PM

Hi,
1.what UNIX Flavor are we talking about -> SuSe
2.What SAP Kernel Release is in place (may be 6.40 non EX2 ?) -> 6.40
3.What release is the DB suposed to have? -> 10.2.0.2.0 - 64bit Prod
4.I see, you are calling an sqlplus from a 10.2 ORACLE_HOME.
Is that the correct HOME the DB is running with ? -> Yes
5.Can you start the DB with
brconnect -c -u / -f dbstart -> NO
Error is:
:devadm 51> brconnect -c -u / -f dbstart
BR0801I BRCONNECT 7.00 (40)
oracleDEV: error while loading shared libraries: libskgxp10.so: cannot open shared object file: No such file or directory
BR0278E Command output of '/oracle/DEV/102_64/bin/sqlplus /nolog':
/oracle/DEV/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0279E Return code from '/oracle/DEV/102_64/bin/sqlplus /nolog': 127
BR0302E SQLPLUS call for database instance DEV failed
BR0303E Determination of Oracle version failed
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0804I BRCONNECT terminated with errors
(Different machine but same situation)
6.As already requested, what is the output of:
6.1.ldd sqlplus
:devadm 55> ldd sqlplus
ldd: ./sqlplus: No such file or directory
in addition:
6.2. env | grep -i ora
devadm 56> env | grep -i ora
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
dbms_type=ORA
dbs_ora_tnsname=DEV
dbs_ora_schema=SAPSR3
ORACLE_SID=DEV
ORACLE_BASE=/oracle
TNS_ADMIN=/usr/sap/DEV/SYS/profile/oracle
ORACLE_HOME=/oracle/DEV/102_64
SAPDATA_HOME=/oracle/DEV
6.3 env | grep -i nls
:devadm 57> env | grep -i nls
XNLSPATH=/usr/X11R6/lib/X11/nls
NLS_LANG=AMERICAN_AMERICA.UTF8
6.4 env | grep -i lib
devadm 58> env | grep -i lib
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
XNLSPATH=/usr/X11R6/lib/X11/nls
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig
GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0
GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
Any ideas???
Br,
Kristjan T.

Terminated with error: REP-300: service handle not initialized == select h

Hello sir,
Here there is one problem. Actually, there is one job and it will run end of the day(EOD) and that job should generate a report for the particular branch, but every day that job is failing, that job should generate a report daily. But that failed job is displayin an error as "Terminated with error: REP-300: service handle not initialized ==> select hdr . cus_mst_no , cus . name_1
so, daily morning, we are manually runnning the script file and generating a report.
". Can you please let me know what to do...it is very urgent

From the Oracle documentation: "A service context handle defines attributes that determine the operational context for OCI calls to a server."
Now, I have no idea what that is, but it looks like you are doing more (OCI calls) than just running a report. Post this also on the database forum.

Optimization run terminated with errors /SAPAPO/OPT012

Similar Messages

Maybe you are looking for