Optimize my slow macbook pro 2009?
With so information out there, its really hard for me to find a concrete solution to my problem. My macbook lags and its really annoying, even when I have only one application open. Attached are some photos so you guys can get a visual on my system. Help me out? =] BTW I've been using various applications such as CLEANMYMAC, ONYX (which doesn't work on my mac because i'm using the 10.0.6 software =\), mackeeper, cleaned my internet browser cache and cookies. Do I need more RAM? Anti-Virus?
1. Mackeeper is the problem. Uninstall it.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
2. Adding memory may help.
Best.
Similar Messages
-
MacBook Pro 2009 very slow and extremely hot
My MacBook Pro 2009 is lately getting extremely hot and is very slow with frequent stalling. Does anyone have any idea?
You can first try to clean up all of the old system files and cache files left behind. Also, try to debloat it. I generally use an app called Detox My Mac which works really well. My mac was doing the same thing and it cleaned it up and i've had no problems since then. I made an article on it if you want to read it and get a download link. Here it is: http://www.softwarestogo.com/speed-up-your-mac-with-detox-my-mac/
-
MacBook Pro 2009 new hard drive install results in very slow function and freezing
I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
Short version:
I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
Long version:
Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
http://scsc-online.com/Scannerz.html
I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case. -
I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?
I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?
Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M. -
How do i updates itunes on a macbook pro 2009 10.5.8 to newer 10.6.8
Hey guys i hope someone can help me. I recenlty brought an older model macbook pro 2009 with itunes 10.5.8 on it. for a great low price of $ 300 dollars. How ever i cant update a newer version of itunes to replace the 10.5.8. So everytime I plug my new ipad into the older mac it says i need itunes 10.6.8 or higher. how do i update to a newer version for free???? youtube was not helpful or goole. So I am stuck.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply. -
I want to connect my MacBook Pro (2009) with Apple TV
I want to connect my MacBook Pro (2009) with Apple TV
I updated my Mac to Mountain Lion OS X 10.8.2 (12C60)
I had tried connecting my Mac for many time but I could not.
iTunse is connected with Apple TVRead this link. http://support.apple.com/kb/ht5404
2009 MBP is not supported for native AirPlay Mirroring. Sorry.
There are a couple of other pay-for apps that do this, but they're not as good... some people have had success. -
Here's the setup:
Eizo Coloredge CG223 DVI to DVI on MacPro 5770 interface (ACD works fine on this too, naturally).
Apple Cinema Display 20" have the DVI connector. I have a Mini Displayport to DVI adapter on this, into one of the 5770's MDPs, neither of which seem to work.
Plug the same ACD via DVI (with DVI to MDP adpater) into my MacBook Pro 2009 MDP and it works fine as a second screen.
So what's up with the 5770 MDPs? I've seen online that the card should at least support two displays, either MDPs x2 or MDP and DVI. I've seen there may be an issue with three, not two.
Any ideas please?
Thanks,
YStriped down to bare inputs - monitors and keyboard/mouse. Works! Dimerising must have interfered with it. Phew!
-
Can I install only Windows on my Macbook Pro 2009?
Hello All,
For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
However, my question is - will this work?
Thanks
CraigAs TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp. BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere). Virtualization runs in OS X, so that should be a non-issue. Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X. -
Slow Macbook Pro- please help, I don't understand previous advice.
Hello all,
I have a very slow Macbook Pro running on Lion 10.7.3.
I looked up this problem on the forums before I sent this message but I didn't quite understand the advice. I have been on something called Disk Utility and Activity Monitor but don't really understand what I'm looking for. It seems a large percentage of my mac is 'idle' if that makes sense. Someone said to look at Page Out but I really don't understand what that means and what sort of numbers are normal.
I do have some storage left so I don't think it could be that. A lot of my gigabytes seem to be taken up by movies and 'other'. I've tried deleted a load of videos but it hardly made a difference. I have Mac Mail and it seems very slow on my Macbook compared to on my Ipad and iphone. iCal is also very slow on here and it always takes a while to load internet pages. It isnt the wifi connection.
Please help and bear in mind I am by no means a Mac whizz so you might have to talk in layman's terms!
Thanks,
AmyIf you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message. -
I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)
It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go. -
Problem description:
Slow macbook pro
EtreCheck version: 2.1.2 (105)
Report generated December 12, 2014 at 9:28:15 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5 days 1:56:44
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
[not loaded] com.wacom.kext.pentablet (5.0.5) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Parallels: Path: /Library/StartupItems/Parallels
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist [Details]
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.spindump.plist [Details]
[failed] com.apple.tccd.system.plist [Details]
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist [Details]
[failed] org.cups.cupsd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[running] com.wacom.pentablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.fitbit.galileod.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.1.0.33 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
AdobePDFViewer: Version: 8.1.0 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User internet Plug-ins: ℹ️
Unity Player: Version: UnityPlayer version 1.6.2 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Logitech Control Center [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 448.07 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 59
Oldest backup: 2014-03-12 12:51:24 +0000
Last backup: 2014-12-05 16:47:01 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
3% hidd
0% Fitbit Connect Menubar Helper
0% WindowServer
0% fontd
0% syslogd
Top Processes by Memory: ℹ️
206 MB iPhoto
172 MB Mail
64 MB Safari
60 MB mds
52 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
49 MB Free RAM
832 MB Active RAM
796 MB Inactive RAM
1.41 GB Wired RAM
45.93 GB Page-ins
1.06 GB Page-outs
Diagnostics Information: ℹ️Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
You have only about 10 percent free drive space left. 50gB is enough to run the computer but, if it gets much smaller, that can slow how Virtual Memory (VM) works as the system has to more carefully search the remaining space for qualified blocks to which to write data.
Adding RAM will reduce the writes-to-disk by VM but you should probably consider a little holiday disk cleaning of stuff you no longer use.
This concerns me:
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
That is a LOT of log-in items for a compute with 4GB RAM. Some are hard to avoid but Excel is a big program that can be easily launched from the Dock. I don't know what "Inspiration 8" is but likely the same advice will apply. -
My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?
A four year battery could be dead. I'd contact an Apple Service Center.
-
I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
Does anyone know what SSD will work well/best in a Macbook Pro 2009 13.3inch 2.25 core2duo laptop
I am looking for advice on the best solid-state drive (SSD) for MacBook Pro 2009. I heard that only a few work well since there is a problem with the Nvidia chip working correctly with SSD's on these particular MBP models. I tried an Intel 520 series SSD and I was getting the "beachball" effect every 20 seconds because of the 1.5 negotiated speed link so I returned it to the store. Has anyone found a good SSD that wont give me the low negotiated speed link/ constant beachball effect?
Any help is greatly greatly appreciated, I've been trying to find a good SSD for months now but worry that I will buy one that it wont work well with my MBP like the Intel 520 series did.
Thanks again.
Using Macbook Pro 2009 13.3inch 2.26 Core2Duo, 4GB of Crucial RAM if that means anything.You should be able to get 3.0 Gbps from your hard drive bay interface. Not sure why the Intel didn't work for you - but I wouldn't 'buy down' to a 3.0 Gbps SSD (some sold by Crucial and OWC, just to name two): get the fastest that you can so that if you upgrade your machine in the future, your SSD can travel with you.
I've had good luck with the Crucial m2 series - I've one of the 512GB models and it's worked well for me and has good Mac support. They're not the absolute fastest on the market, but they're good and solid.
For more information and a 'buyer's guide' see here.
Clinton
Maybe you are looking for
-
Hi all, For reporting purpose, I need to populate data for opening balance and the changes for all the balance sheet items after consolidation. I believe we can do this by using movement type as an indicator. My problem now is for the data extracted
-
Does anyone know the accurate dimensions of iMac 21.5" shipping box (late 2012 - the "razzor"model)?
Does anyone know the accurate dimensions of iMac 21.5" shipping box (late 2012 - the "razzor"model)? Note that I am looking for the BOX (packaging) measures, not the computer measures. Hard to find that on th einternet. Thanks! Mott
-
I have a Sony HDR-PJ260V camcorder and I use iMovie, is there a way to import my videos in 1080?
Okay, so I'm pretty new to this, and today when I tried to import my videos via iPhoto they got all grainy and stuff. What should I do to import them on their normal quality? Thanks
-
Hi I would like to know how to remove repeitions from a 1D array. For example, AAANNNNDDDDKLL to ANDKL. Also, what if the array is not sorted? Arjun
-
Folders have disappeared. How can I get them back?
Thunderbird has been reluctant to `start` recently and to-day I can send and receive emails, but the folsers down the left hand side, in which I store all the emails I want to keep has disappearwd. I have tried everything I can think of, but nothing