OPtimize or rewrite Get Obejc instruction

Hi All
I'm facing an optimization issue in a report OM and i would like to rewrite or optimize the code below.. I want to reduce the duration and i'm trying to write a new version without the PCH logical database . Will it be possible to reduce it without the PCH? How can i do it?
Thanks to all!
Infotypes                                                           *
infotypes: 1000,                       "Object
           1001,                       "Relationships
           9149,                       "Site
           1013,                       "Employee Group/Subgroup
           1008,                       "Acct. Assignment Features
           1005,                       "Planned Conpensation
           9107,                       "Org. Unit Type
           1007,                       "Vacancy
           0001,                       "Organisational Assignment
           0002,                       "Personal Data
           9101,                       "For Functional Area
           9108.                       "Org. Unit Ref      HR1K901124AJK
start-of-selection.
get objec.
end-of-selection.

Feels like I was just at the wrong place and the wrong time, at some unpredictable intersection of circumstances …
Ignoring the message didn't help, just left me without any .pdf output. I felt the need for results, so I started from File > New (as detailed in another post) and finally managed to migrate my content into a doc file that didn't throw any errors. On the way there, I came across "Separation out of range" and "Inconsistent colour definition", which I overcame with MIF and file-by-file comparison.
Arnis, you'd already helped me with the Creator vs real Distiller configuration
Error7103, if I hit this annoyance again I'll experiment with printer settings and routes.
N

Similar Messages

Need help!!!!!! I've forgotten my security questions. My rescue address is not available anymore. So I can't get the instructions to reset my security questions. Please send me this instructions

Need help!!!!!! I’ve forgotten my security questions. My rescue address is not available anymore. So I can’t get the instructions to reset my security questions.
<E-mail Edited by Host>

Contact the Apple account security team for your country for help changing your security questions: Apple ID: Contacting Apple for help with Apple ID account security.

When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

Hi Team
Please help me with this.
Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
Version : 29
OS : windows 2003
Any suggestions ?

Thanks for the reply !
At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
thanks in advance!

How can I get my instructional text to display when I open the pdf?

I have some fields which I have set up which have help/instructions for completing the information required. This is a questionnaire. When I save it as a pdf, the instsructional text does not display. I would really appreciate if someone can tell me how to fix this.

Thanks for taking the time to respond to my query. The text does not display when I hover my mouse over it.
cheers Deborah Frow
From: Ajlan huda <[email protected]>
To: Deborah Frow <[email protected]>
Sent: Monday, 12 January 2015, 5:24
Subject: Reply marked as helpful on How can I get my instructional text to display when I open the pdf?
|
How can I get my instructional text to display when I open the pdf?
Ajlan huda marked SumitV's reply on How can I get my instructional text to display when I open the pdf? as helpful. View the full replyMarked as helpful:Hi Pacific Immigration, In Adobe Acrobat/ Adobe Reader there is no “?” shown for help, but if you mouse over the field for 1-2 seconds the Help text is shown.
Following How can I get my instructional text to display when I open the pdf? in these streams: Inbox
|

I'm finding Ios7 exceeding frustrating having to spend hours reinstalling and looking for last data. For example I cannot delete photos I have synced, applications are missing. Where can I get clear instructions to fix the mess?

Where can I get clear instructions to clean up a mess that Ios7 has made of my data and info on my iPad. I can't delete photos, apps are missing, it's crazy and so frustrating. I have spent hours on this.

How did the photos get onto your iPad ? If they were synced from a computer then they can't be deleted directly in the iPad's Photos app - instead they are deleted by not including them in your next photo sync from your computer's iTunes.
For your apps, as long as they are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app on your iPad, and via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes. If you had backed up to your computer's iTunes before starting the update then you could redownload them to your computer's iTunes and then retry restoring to your backup and see if that copies the apps and their content back (the actual apps aren't included in a backup, just their content/settings, so for a restore to work fully you need to have the relevant apps in the Apps part of your library).

When i click acrobat a pd on my desktop, i get "illegal instruction" message?

? when i click a pdf on my desktop, i get "illegal instruction" message?

I REALLY thank you for your reply.
Happily my GRAND DAUGHTER was able to fix the problem for me - she is a
wiz!!
Happy New Year!
In a message dated 1/7/2015 4:57:52 P.M. Eastern Standard Time,
[email protected] writes:
when i click acrobat a pd on my desktop, i get "illegal instruction"
message?
created by Anoop9178 (https://forums.adobe.com/people/Anoop9178) in PDF
Forms - View the full discussion
(https://forums.adobe.com/message/7075410#7075410)

Where can I get full instructions on how to use photoshop?

Where can I get full instructions on how to use photoshop?

Hi Stephanie,
Photoshop is a huge program with a pretty steep learning curve. I would look at your local library or bookstore for a book for your particular version of Photoshop.
Adobe Classroom in a Book is a good starting point.
I also like books by Deke McClelland, Scott Kelby and Ben Willmore.
You may also want to look at signing up at Lynda.com to access their vast video tutorial library (I believe it is $25 USD/month.)
http://www.lynda.com/
Adobe TV has some good free tutorials:
http://tv.adobe.com/
Julieanne Kost (my hero) has a ton of resources:
http://blogs.adobe.com/jkost/
Russell Brown also has some good videos:
http://www.russellbrown.com/tips_tech.html

There are times that I don't get voice instructions in Maps on my iPhone

There are times that I don't get voice instructions in Maps on my iPhone 5s. Actually, the directions don't even advance automatically as I expect. Can anyone explain why this happens? How do I correct this? It's dangerous to drive and look at the iPhone screen at the same time, much less manually advancing the the directions!

Put the phone in Airplane mode...this turns off all iPhone radios...but, you can go back into settings & turn WiFi back on. You can then use iMessage.
No nasty surprises if you do that.

Rewrite or optimize the *Get Objec* instruction in an *OM* report

Hi All
I'm facing an optimization issue in a report OM and i would like to rewrite or optimize the code below.. I want to reduce the duration and i'm trying to write a new version without the PCH logical database . Will it be possible to reduce it without the PCH? How can i do it?
Thanks to all!
Infotypes                                                           *
infotypes: 1000,                       "Object
           1001,                       "Relationships
           9149,                       "Site
           1013,                       "Employee Group/Subgroup
           1008,                       "Acct. Assignment Features
           1005,                       "Planned Conpensation
           9107,                       "Org. Unit Type
           1007,                       "Vacancy
           0001,                       "Organisational Assignment
           0002,                       "Personal Data
           9101,                       "For Functional Area
           9108.                       "Org. Unit Ref      HR1K901124AJK
start-of-selection.
get objec.
end-of-selection.

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

How to optimize code for getting list of portal GP erroneous processes

Hello,
In our Web Dynpro application for Java we got the list of GP processes with status Erroneous which match the following criteria (initiator, processName, blockName, actionName, startDate, endDate, instanceName, actionProcessor) by loop of all portal users. The problem is that it takes too much time for execution. In example with 200 users it takes about 5 min. Any idea how to optimize execution?
 
 
 
 
public java.util.List getListOfUser( ) { 
 //@@begin getListOfUser() 
 List<IUser> usersList = null; 
 try { 
 ISearchResult uniqueIDs = UMFactory.getUserFactory().getUniqueIDs(); 
 if (uniqueIDs.getState() == ISearchResult.SEARCH_RESULT_OK) 
 { 
 usersList = new ArrayList<IUser>(); 
 for (Iterator<?> it = uniqueIDs; it.hasNext();) { 
 usersList.add(UMFactory.getUserFactory().getUser((String)it.next())); 
 } 
 } 
 } catch (UMException ex) { 
 msgMngr.reportException("Unable get list of users!"); 
 } 
 return usersList; 
 //@@end 
} 
 
 
 
public void getErrorProcessAllUser( ) { 
IUser currentUser = null; 
 try { 
 if (wdContext.nodeUsers().currentUsersElement().getLogonId() == null){ 
 List<IUser> userList = getListOfUser( ); 
//{this loop is extremely slow 
 for(int n = 0; n < userList.size();n++){ 
 String logonID = userList.get(n).getUniqueName(); 
 currentUser = UMFactory.getUserFactory().getUserByUniqueName(logonID); 
 viewProcessDetails(currentUser); 
 } 
//} 
 }else{ 
 currentUser = UMFactory.getUserFactory().getUserByUniqueName(wdContext.nodeUsers().currentUsersElement().getLogonId());
 viewProcessDetails(currentUser); 
 } 
 } catch (UMException e) { 
 msgMngr.reportException("No user with this logonId!"); 
 } 
} 
 
 
public void viewProcessDetails( com.sap.security.api.IUser currentUser ) { 
 //@@begin viewProcessDetails() 
 List<IProcessInfoElement> bindableResult = new ArrayList<IProcessInfoElement>(); 
 try { 
 IGPRuntimeManager rtManager = GPProcessFactory.getRuntimeManager(); 
 IGPWorkItem[] workItems = rtManager.getWorkItems(GPWorkItemStatus.WORKITEM_STATUS_COMPLETED_BY_SYSTEM, GPContextFactory.getContextManager().createUserContext(currentUser)); 
 for(int i = 0; i < workItems.length; i++){ 
 IGPProcessInstanceInfo processInfo = rtManager.getProcessInstanceInformation(workItems.getProcessID(), currentUser); 
 if(GPBlockInstanceStatus.getStatusForCode(processInfo.getStatus()) == GPBlockInstanceStatus.BLOCK_INSTANCE_STATUS_ERROR){ 
 IGPProcessInstance instance = rtManager.getProcessInstance(processInfo, GPContextFactory.getContextManager().createUserContext(currentUser)); 
 IGPActivityInstance[] blocksList = instance.getChildrenInformation(); 
 for(int j = 0; j < blocksList.length; j++){ 
 IGPActivityInstance[] actionsList = ((IGPBlockInstance)blocksList[j]).getChildrenInformation();
 for (int k = 0; k < actionsList.length; k++){ 
 DO SOMETHING

got the answers ..
we have use IndexedRecord instead of MappedRecord
 IndexedRecord input = rf.createIndexedRecord("input");
 boolean flag = input.add("/FolderpathValue");
 flag = input.add("CampusCodeValue");
Thanks,
Saravanan

Does anyone know where I can get Operating Instructions for the Sony BVW-75 Betacam SP?

I have been trying without success to find Operating Instructions for the Sony BVW-75 Betacam SP I just bought. Does anyone know where I can get it?

Thank you for trying to help. All of those links are for the product brochure, service/maintenance manual, or other products. I have spent several hours following Google search results and eBay searches with no luck. That's why I am reaching out to the technical community to see if someone has an instruction manual somewhere in the back room of their studio.

I get "the instruction at 0x7b1270a1 referenced mem a 0x7b1270a1. Can't readWhat is problem?

When I attempt to run Firefox I get message: The instruction at 0x7b1270a1 referenced memory at 0x7b1270a1. Memory could not be read. I removed and reinstalled product address changed slightly (previously was 0x7b5670a1 before) I removed another product to as well which seemed to make the memory address change. What is wrong?
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; (R1 1.6); .NET CLR 1.0.3705; Media Center PC 2.8; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hello , I have read your post on how your All-in-One computer indicates that it has encountered a referenced memory error message, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Using Microsoft System Configuration (Windows 8). This should help to prevent any background programs or services from interfering with the memory on your system. I also suggest updating the drivers on your computer by following the steps in this resource on Using HP Support Assistant (Windows 8). If the error message still indicates a memory problem, I recommend returning your system back to a previous restore point before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue continues, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

Where can I get BASIC instructions for CS5?

Is there a manual? The video tutorials are much too advanced for me.

As Peter says, the CS4 version should do for you. The difference, of course, is the lack of reference to CS5 features. But since you are asking for basic help, then the core features you need the most instruction with are essentially unchanged. As a book for a now obsolete program, the CS4 version can probably be bought at a discount (I have not searched) or might be available at your library.
I would also like to thank you for not just burying the forum with a bunch of questions on how to accomplish specific basic tasks. I love to answer questions here (hence over 3,000 posts), and I often learn a lot by trying the solutions before posting them. I even don’t mind answering the occasional basic question. But when the same user keeps asking for help with the simplest tasks, I can get a little… abrasive. Those people should be seeking the very help for which you are asking.

Getting processing instruction node

I am trying to get the following node from my input XML file.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
I tried to get it through processing-instruction() method But I am not able to get it.
Hoe can I get this node? I want to reset the encoding attribute of the node.
Thanks in anticipation
Rajesh

it is a non-sense to try changing the DOM: the encoding must be set correctly when you serialize the to an XML file, therefore, if you use JAXP:
transformer.setOutputProperty(OutputKeys.ENCODING, "Shift_JIS");

I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
tt2

OPtimize or rewrite *Get Obejc* instruction

Similar Messages

Maybe you are looking for

OPtimize or rewrite Get Obejc instruction