'optimized' photos look terrible. What am I doing wrong.
I have a 3GS and have synced with my laptop before (HP pos), I also use the same laptop to sync to my iPad.
Now that I have upgraded my iPhone to iOS4 all my synced pictures are of terrible quality, they look ok on the iPad still and ok on the laptop but the iPhone looks very bad. I know that iTunes 'helpfully' decides that I want to save space and optimizes the images for me, is this a bug or can you adjust this in the settings some where.
Ned.
Deselect "sync photos", which will take off all of your pictures during the following sync. Activate the option again and put them back onto your phone, that should solve your problem.
Similar Messages
-
Phonebook Contact Photos Look Terrible - what's wrong?
I have a T-Mobile Blackberry 8900 Curve (which I LOVE!) Just yesterday I updated the device software (v.4.6.1.231 using the new Desktop Software for MAC!) and I've noticed that all of my phonebook contact photos (for caller ID) are now compressed or look blurry/out of focus. When I pull the photos up in my Media file they look great-- but when someone calls or I place a call, the photo looks terrible! This has never been an issue before. Any ideas/suggestions?
Thank you!Deselect "sync photos", which will take off all of your pictures during the following sync. Activate the option again and put them back onto your phone, that should solve your problem.
-
Movies, Music, but no photos... what am I doing wrong?
Hi gang,
I can't figure out how to see my photos from iPhoto on my iPad. I've got 4.3, I can see my shared music libraries, and videos, but not my photos. How do I do that?
Thanks,
dpISharing only works for music and video, not for pictures.
-
I am in Aperture -photos - browser - view. Am trying to find "Sort" by filename to elimate duplicates. I cannot find "sort in Viewer and not sure what I am doing wrong. Help
This is what the top of the Viewer should look like:
Here is the same view with the pulldown opened:
What is it that you see? Include a screenshot. -
What am I doing wrong? Photos will not print.
I finally learned a little about layers when I got CS6 on my Mac.
I bought 2 Topaz plug-ins, Adjust & Simplify.
I took 39 photos on a flash drive to the local CVS & Rite-Aid and both machines said 34 of my photos are corrupt and will not print.
What am I doing wrong?
I did change them from psd to jpeg before putting them in a desktop folder.
Could that be the problem?
Thanks, EliHave a look at this article in the Apple Knowledge Base and let us know if it solves your problem.
-
Hi I don't know if I was able to send this question before but here it goes again. I'am doing a poor man's morph project on my motion 4 program, and it works great while in Motion, but once I try to import it to fcp, it will import the photos but not the optical flow fx, what am I doing wrong? I appreciate you help
Decided to use cmd A to select all the icons on the desktop and then looked for a right click option. There it was - the option to move to a folder. I now have them all in this folder which tells me it holds 157 items. Now you know why I needed to know LOL
Thought it might be of help to someone.
Cheers Mally -
I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?
Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT -
I make annotations to my photos in iphoto using preview. But once I have made the annotation I do not get the photo back into the event in iphoto from which I took the photo. What am I doing wrong? I am not using aperture
For the annotations to display on the photo in iPhoto you must setup Preview as the external editor in iPhoto via iPhoto's Advanced preference pane.
After adding the annotations just do a Save. iPhoto will then recognize the change via a new modified version. You can revert to the original at any time if you want to get rid of the text.
OT -
Using Adobe Photoshop Elements 10 Editor as external editor in Aperture. The issue is once i make the changes in Photoshop it request that I save (use tiff) and the photo is not update in Aperture. What am I doing wrong?
Marianne,
how do you save? Photoshop Elements can save either versions or overwrite the original file, afaik.
You need to set the save preferences, so that it will write to the original file and not write a version. Also the filename extension should be "tiff" and not the default "tif" (I think you did that already).
Regards
Léonie -
Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.
Could it be something i have done in my settings?
or when i am saving the file to JPEG?Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level. -
I am trying to download photos off my IPhone as the "Cloud" tells me I have run out of storage space. I have connected my phone to IPhoto on my Mac but when I clik on Import nothing happens. What am I doing wrong?
Help for iCloud storage space >> Managing your iCloud storage
-
I have a desktop computer- MAC. When I am looking for information or pulling up games for my grandkids, it will say I need to download the latest version of dobe Flash Player to view. I have downloaded this numerous times yet it still does not allow me to view. What am I doing wrong?
Could be the OS X version is too old for the later recommended Flash player version.
So this is where knowing what your computer really is, and the exact OS X version running in it. There is a hardware limit to upgrading the OS X in a PowerPC Mac with a ceiling of OS X 10.5.8 at the latest. This also limits the upgrade to a later version Adobe Flash player.
If the computer is not an older PPC-based Mac, and instead has an Intel core-duo or core2duo, an upgrade to OS X 10.6.8 is possible through purchase of the retail Snow Leopard 10.6 DVD and after installation, run Software Update to get the 10.6.8 Combo update v1.1 for Snow Leopard. This will not work on a PowerPC based Mac.
Should the computer be able to run a later OS X, a newer Player could be installed.
If the ceiling as suggested above be the case, and the workaround possible.
The question posed by Klaus is a minimal request for basic info.
Good luck
edited -
i have a pc and am using the trial version for now. I have readabout and seen on other computers, but no matter where i look or follow the dirrections i can not find the mini bridge what am i doing wrong. thank you
CC and CC2014 are the current versions of Photoshop. CC stands for Creative Cloud.
That being cleared up, a respectful request:
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?
Good day!
What is "place" supposed to mean – open, place as Smart Object, …?
What are the image’s Color Mode and bit depth?
Could you please post a screenshot with the pertinent Panels visible?
Does Window > Adjustments not raise the Adjustments Panel?
Regards,
Pfaffenbichler -
I'm trying to attach multiple photos to email. Sounds simple....except I don't see a "share" button on the lower left side In photo roll or when I touch the send/share button. Yes, that would be in photos. What am I doing wrong?
Tap the square with arrow on top right
http://i1224.photobucket.com/albums/ee374/Diavonex/edb18be9.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/c33705eb.jpg
Note: Maximum five photos
Maybe you are looking for
-
Lock aspect ratio of resizeable box
Hey guys, I have made a resizeable box that you can resize using handles on all four corners I have tl (top left handle), tr (top right handle), bl (bottom left handle) and br (bottom right handle) Its rather difficult to explain. See the picture att
-
Hi, does anyone have any experience in getting websites ranked in google/yahoo etc. I have built a website for my daughters skating club using url of: www.nlfsc.com but this does not get ranked in google. The site is held on the mobile me server. I h
-
Significance of the field "REVERSAL INDICATOR"
hI gURUS, I am trying to load data from R/3 source system to BW. I have a key field where data is positive but when it is getting transferred to BW it is getting zero. I checked in PSA, data is there but I have a field "REVERSAL INDICATOR" whch shows
-
Accounting entries are not reversed
Dear Sir/Madam, We have canceled an excise invoice through transaction code J1IS. The excise invoice was for other movements and created in J1IS only. The excise entries were canceled but the accounting entries are not canceledafter the cancellation.
-
Loaded font missing in Photoshop CS6
Loaded font active by opening file but while editing suddenly not active anymore. Photoshop therefore gives an error and refuses to save the file. Fonts are not used in smart layers. Working with Mac OS 10.6.8 and for fontmanagement Linotype FontExpl