Optimizer run error - COM error 2 1 when deleting transportation orders

Hi Experts,
Optimizer run job (program /SAPAPO/RMSNPOPT) gets failed with following error: -
COM error 2 1 when deleting transportation orders
Can anybody let us know why this error occurs and how to resolve it. Thanks a lot.
Regards,
Chandan

Hi Chandan,
Could you check SAP note 1232670 whether applicable
for you
Regards
R. Senthil Mareeswaran.

Similar Messages

Delivery Deleted, Showing error when deleting sales order. R3, Oracle9i

Hi experts,
One of my users deleted delevery document and when he is trying to delete sales order it is giving error.
Also it is showing delivery archived. How to retrieve the document.
Thnx in advance

Hi Dhanush,
I suppose there is no need to run any consistency jobs for this issue(as per my understanding).
As specified above by Senthil just try first running //CCR for the LOC_PRODUCT with category as Sales Order (also tick the VBBE table option) and Purchase Order. I think this will solve your purpose. Also please make sure that the IMs for the LOC_PRODUCT is active.
Do let us know your findings on the same.
Thanks and Regards,
PP.

How to refresh error message log when displaying an order in WebUI?

Hi,
When I create and save an order in WebUI, it shows error messages:
Details Business partner XXXXXXX has status "Not Released"
Details Business partner XXXXXXX has status "Locked"
Key User XXXXXXX may not be used.
Then I goto "BP" and correct corresponding business partner. But when I open order again in "Display" mode in WebUI, the error message is still there.
Is there any way to remove or refresh those incorrect error message in WebUI before display?
Thanks a lot!

Hi lonny,
The scenario in here is that although the error has been rectified, the message still appears.
Check out method ADD_MESSAGE of the class CL_BSP_WD_MESSAGE_SERVICE.
All UI messages are raised via this class itself.
You may enhance this method and remove the second message.
Regards,
Ravi

Generate idoc when deleting sales order

I have seen in matmas that there is a flag for the deleted mark, but i can´t see it in the sales order, is there any flag in orders05 when the sales order is deleted, does the system send an idoc when the sales order is deleted, how?
Thanks in advance.
Regards

OK, it still finished, just only last question please.
In the head table CDHDR appears the sales order with the 'U' field indicating that it has been updated and in the CDPOS table appears all the positions with the 'D' flag indicating that has been deleted, is it ok or how could i know that the whole sales order has been deleted?.
Thanks in advance
regards

Error in process when creating Purchase Order against WBS

Hi!
We are creating a purchase order (BBP_POC) against a WBS. But when trying to purchase for more than what the project budget is set to the purchase order gets the status "Error in process". We do not want the purchase order to be replicated to ECC but dont want it to be created in SRM as well. Is there a way to get an error message when trying to create the Purchase order? We do not want to end up with alot of purchase orders with "errror in process".
When doing the exact same thins in sourcing cockpit it is not possible to create the purchase order. Then we receive the error message (or warning) stopping us from creating a PO in SRM.
How to get the error and warning in BBP_POC?
Sincerely
Anders Öhrling

The budget check should work in the following cases
    1. When you create and change a shopping cart (e.g. after it has been held)
    2. When you create and change a purchase order (purchasing cockpit)
    3. When you create a purchase order from within the sourcing cockpit (as of SRM 2.0)
    4. With the approval of shopping carts and purchase orders
Unfortunately nr 2 is not working.
BBP_BUDGET_CHECK is not implemented.
Sincerely
Anders Öhrling

Java "Application Failed to run" error in safari

I'm getting a " Application Failed to run" error on safari when trying to upload photos to facebook via the java uploader. I can't use the iphoto uploader for this particular page so that is not a solution.
I've uploaded photos plenty of times before but starting today, I get the following JAva Console message that I've deleted my user name from. Although I don't see anything here that indicates an erro, it is promted by an Error message that you click for details, which says the "The Application failed to run". Any thoughts on what I can do to correct this? I haven't changed anything since it's worked in the past and I've quit safari, restarted and ran disk utility.
Java Plug-in 1.6.0_15
Using JRE version 1.6.0_15-b03-219 Java HotSpot(TM) 64-Bit Server VM
User home directory = /Users/
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
----------------------------------------------------

This I guess is not a Safari problem since I got the same error in Firefox. How does one fix a Java problem occurring in at least two different browsers?

Error Message AM057 while deleting contact person in customer master

Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
Balaji

Balaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution.

SNP Optimizer run ends with error: Error when determining Customizing data

Hi All
Can you help please what settings are missing: SNP optimizer run canceled with error "Error when determining Customizing data".
Thanks
Best Regards
Andrey

On integration tab of SNP optimizer profile,
maintain 'regard as customer demand' for both dependent demands and distribution demands for fixed orders.
By default it is 'regard as hard constraint' which should be changed.
bye,
Nitin Thatte

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Run Time Error in e-commerce crm 5.0 when creating new order

Hi all,
I am getting Run Time Error in e-commerce crm 5.0 when creating new order, shopping basket is comming , but while creating order , getting run time error.
Thanks,
Nagesh

Hi nagesh,
Are you able to resolve the issue. Please let me know the solution.
I had started a thread with a same problem but in ERP E-commerce. Points will be rewarded if you provide the solution in the thread below
Re: Run Time Error in e-commerce crm 5.0 when creating new order
Thank You
Ram

Error Code 1000 when trying to run Backup Assistant Plus.

I am getting backup failed and Error Code 1000 when trying to run Backup Assistant Plus. Have not been able to backup for several weeks.Droid Razr Maxx.

Hi ellendritz- We are dedicated to make it easier to backup your data! We have integrated Backup Assistant with the Verizon Cloud service offering you many more features and 5GB of storage free! Visit http://www.vzw.com/cloud for more details. The Verizon Cloud app is currently available for download in the Google PlayStore. Please attempt backup with the new application and keep me posted on the status as I would be happy to offer additional support if needed.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Error Code -61499 when Running an FPGA VI on Develpement Computer with Siulated I/O

Dear Forum
I have a problem with running my FPGA VI on the development Comupter with simulated I/O
I Created a testbench as described in
http://zone.ni.com/reference/en-XX/help/371599D-01/lvfpgaconcepts/test_bench_tutorial/
This works fine. I can read an write the I/O Nodes
But when I insert a read/write control node (from the FPGA interface palette) into my Host-VI to directly write a value to a Control on my FPGA VI, i get the error -61499
The error happens in the VI on my Hostcomputer ad the message is:
An internal software error on LabView FPGA Module has occurred. Please contact NI technical support.
The error does not happen, if I remove the read/write control, or if I dont call it.
The error does not happen, if I compile the fpga-vi and let it run on my fpga hardware. It happens only in the simulated mode.
The error happens in the simulated mode when i use the testbench for simulating input Signals, it also happnes, when I use random Input Signals.
It seems that the error does not happen during compilation. The simulated VI runs and the error happens, only when I call the read/write control.
Can anybody help me?
I appreciate every suggestion
Thanks
David
Solved!
Go to Solution.

Ok, the problem is solved, thanks to ni support who helped me:
The solution is, not to have spaces and end of lines in the names of frontpannel elements.
In simulated mode, a host-vi has problems to access frontpannel elements of the fpga-vi with the read/write node if the frontpanel elements have special characters.

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3.
The application was restored from a backup using Apple Time Machine.
I would reinstall the applications, since I have the original disks, but alas, the Mac Mini has no external drive.
Any ideas?

CS4 is untested and unsupported under 10.9.x
That said, you should uninstall everything run the cleaner tool and then download the CS4 installer and try it again.
If that doesn’t do it, you’re on your own.
Cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Download link for CS4: http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

Error File missing when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Error "File missing" when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Hi there slklug43,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

Error has occurred when running internal order report

Error has occurred when running internal order report. Last month also used this report without any error.
Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
Error #02: SQL Error: 422
Error #03: An error occurred while reading the data; Navigation is possible.
Please guide me to solve this issue.

Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
In here??
Sorry I'm trying to help but please answer the questions specifically... thanks.

Optimizer run error - COM error 2 1 when deleting transportation orders

Similar Messages

Maybe you are looking for