Optimizing in full mode does not removes false hits any more from COUNT_HIT
Hello,
I am using the COUNT_HITS fonction to get the number of hits for a full text query with the EXACT parameter set to false or true.
If I am not wrong the ctx_ddl.optimize_index('MY_INDEX','FULL') is suppose to remove false hits from COUNT_HITS where the EXACT parameter is set to false but it does not work any more. It still takes into accound records that have been deleted.
Is there other actions to do to remove false hits from COUNT_HITS?
Thank you for your help.
Kind regards,
Fred
any way to make the pinned site shortcut (not all sites) open in full screen mode when double clicked?
I think it does which is a surprise. E.g. if you last closed an IE window in Fullscreen mode it can open up again in Fullscreen mode. This may be in response to user complaints about Maximized mode which would still be a problem because that
is the OS doing. However, even there it has always been possible to open a window from a shortcut in Maximized mode. The problem is that any windows spawned from that one will have the original window's Normal mode attributes in terms of size and
shape.
FYI
Robert Aldwinckle
Similar Messages
-
My assist button does not access vaio care any more help
need help assist button does not activate vaio care any more please help me
Hi westlyeaton,
Welcome to Sony Community!
I believe you were referring to Vaio Care Rescue Mode, right? To access the recovery partition. Is the Assist button stuck from being pressed?
Try to Power Cycle the laptop - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
Try to press the Assist button while the unit is on. There are certain models where Vaio Care (Desktop) will open when pressing Assist while the computer is on. Then test while the unit is off.
Let us know if this will work.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
AlainCould that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here. -
I synced my iPhone 4 and now I am stuck in recovery mode. iTunes does n
iOS: Device not recognized in iTunes for Windows
Click the link for full instructions: http://support.apple.com/kb/ts1538
5. Verify that the Apple Mobile Device USB Driver is installed
If the device is not recognized while in Recovery Mode
Note: If your device is working on its own and is not in recovery mode, this set of steps is not for you; do not manually place the device into recovery mode.
Your device may not be recognized while in recovery mode. This can happen during an update or restore of your device. Typically when your device is in recovery mode, it will show the "Connect to iTunes" logo on its display. If iTunes does not recognize the device when in this state, try the following:
Open the Device Manager:
Windows XP: Click Start > Run. In the resulting dialog, type devmgmt.msc and press Return.
Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return.
Click the plus icon (Windows XP and Vista) or the disclosure triangle () (for Windows 7 and 8) next to Imaging Devices, Other Devices, Portable Devices, and Universal Serial Bus Controllers to expand these sections.
Check these sections for one or more entries called Apple Mobile Device (Recovery Mode). These entries may or may not have exclamation marks on them similar to the following:
If you see only one "Apple Mobile Device USB Driver" entry that has no errors on it:
If you see two "Apple Mobile Device (Recovery Mode)" entries with exclamation marks on them: -
Updating CV (delete entry which does not match the criteria any more)
Hi,
A MV synchronises entries in a CV (MVtoCV) depending of a criteria (flag). OwnerShip=Meta view.
An MVentry is created.
If this MVentry doesn't match the criteria, not synchronized in the CV=OK
If this MVentry matchs the criteria, synchronized in the CV=OK
If this entry is deleted from the MV, deleted in the CV=OK
BUT
An MVentry is created.
If this MVentry matchs the criteria, synchronized in the CV=OK
if this MVentry doesn't match the criteria any more, the CVentry is still not synchronized=OK BUT remains on CV (my problem).
HOW to remove this entry automatically.
I tested with AttFlow and delete operation but without success.
Thanks for your helpOur approaches are actually the same. but BKBK goes further. The onMissingTemplate method will never fire in this case, as the page you're rewriting to actually exists, so what you're doing here is manually raising a 404. There are two ways of doing this; firstly you just do something like this:
<cfif FoundItems.RECORDCOUNT EQ 0 >
<cflocation url="/404.cfm" addtoken="false" statuscode="404" />
</cfif>
This will let people know that they've entered an invalid URL, and the statuscode will tell search engines that there's no page there.
What BKBK is suggesting is perhaps being more intelligent. Rather than just throwing them at a standard 404 page, try and handle it a little better. In your page where you would normally show the results, try and find any relevant results. See if there are any keywords in the URL you can search the database for, and display the links to those products on the page. Nothing groundbreaking here, just something a little more "web 2.0" than just saying "no, there's nothing here".
The only difference would be that you want to do this:
<cfheader statuscode="404" />
...before then going on to display your page. This is purely for the search engines.
Hope that explains it a little.
O. -
Itunes does not work after Update any more
Itunes does not start after the uodate and cannot be reinstalled.
Seems not only a problem to me
Any solutions yet ?Hello Wizzie71,
It sounds like you updated iTunes and now it will not open. Try the steps outlined in the following article. You may need to re install iTunes but your library will remain intact if you do.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling -
Ipad does not show usage times any more
Hi, my ipad no longer shows the usage times of itself. It merely shows a '-' mark where usage and standby times are normally shown.
This may have occurred after the ios6 update but I cannot be sure.
Any ideas on what the problem is or how it can be fixed?
Thanks
MikeHi guys,
I've since fixed the problem.
Martha I recommend that you download an app for battery charging so that it will tell you the percentage that the iPad is charged. Then charge the iPad fully and as it reaches 100% it should display 0 mins in both boxes.
I did a restore prior to this but it did not seen to have any effect.
I'm not even sure why the iPad went like this but mine has been fine since.
Hope this helps
Mike -
When I delete an E-mail the next one does not automatically pop up any more
When deleted,next E-mail always opened.Now it just goes back to E-mail page.Went into yahoo mail site and it still has "open next E-mail" checked as the option of choice.Firefox 25 just downloaded automatically a few days ago and that is when I started having the problem.
Try some basic steps if you have issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Rule containing "Mark as Read" and "Move to Folder" does not remove New Mail Notification
I asked this question in another forum here (sorry for not linking, but the forum would not let me because my account is not yet verified):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rule-containing-mark-as-read-and-move-to-folder/061a8009-dd98-4304-81b0-6c4c8a5a6205
They passed the buck to this forum. Can anyone help? Here is my original post:
I have set up a rule so that emails from a certain sender should be marked as 'read' and routed to a certain folder. The rule works just fine except for the fact that it does not remove the new mail notification from the taskbar icon
or the system tray. The rule reads as follows:
Apply this rule after the message arrives
with New Home Sale in the subject
move it to the _New Home Sales folder
and mark it read
Once I open the _New Home Sales folder, all messages are marked as read, as they should be. When I open any of the emails in this folder, the notification goes away. It does not even have to be the most recent email or the same folder
- opening any email from any folder clears the notification, even if the same email was used to clear it before. Previewing does not remove the notification.
I have a similar rule set up for another folder:
Apply this rule after the message arrives
with New Home Final Sale in the subject
move it to the _New Home Final Sales folder
and mark it as read
The same thing happens here with the unread notification.
This is very annoying, as I want to receive these emails but I do not need to know every time one comes in.
Does anyone have any advice on this? I have read a few threads about an unread email bug, but I'm hoping I'm just missing a setting somewhere. I find it hard to believe such a bug would persist this long.Hi,
From your description, I would like to verify the Exchange version and Outlook version at first. Since I have a test in my environment using Exchange 2010 with Outlook 2010. I create a same inbox rule, it works and there is no new mail notification from
the taskbar.
What's more, I recommend you use Outlook safe mode to determine whether the problem is caused by add-ins.
If the issue persists, please install the Outlook latest Service Packs and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]] -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Full extractor does not load all the g/l accounts
Hello experts,
I have a empy DataStore Object (ZFI_O02) and I want to load the information (g/l accounts) with a full infopackage. The load have the status of "Green" but when I check the information I have accounts without some documents. I do not know why my full extractor does not load correctly all the information.
I test the DataSources (3FI_SL_K2_SI) with the Tcode RSA3 and the test shows the all the accounts with all the documents.
Others tests -> I used the same infopackage (full mode) and restrict with the 0FISCPER (2010) and 0GL_ACCOUNT (Account Number) checked the PSA and I have the acoount with all the documents.
-> I used the same infopackage (full mode) and restrict only with the 0FISCPER (2010) checked the PSA and I have the account with one document missed.
Please help me.
Regards
JeanetteHi Jeanette,
Looks like the data is getting overwritten in the DSO. This usually happens when there are records with same Key Fields and also has certain characteristics that are unique but not key fields.
I suggest, you take a subset of a GL for which the data does not match, then compare the entries in the DSO and the PSA.
For Eg: If Business Area is not the key, then the data for all the same business areas will be overwritten. Thus making the BA key would eliminate the problem.
Hope this helps.
Regards,
Gaurav -
Digital ICE epson scan (professional mode) does not work
Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
DeanYou should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php -
Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
ThanksHello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password". Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G. -
ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source
What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
Cheers, Tom
Maybe you are looking for
-
Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.
-
Can I install three of hard drive on Ultra-10??
Help me, plz~~ I have Ultra-10 with Solaris 8. <Primary IDE channel> Rear hard drive(master-device 0) --------- Front hard drive(slave-device 1) ----------- Motherboard J15(primary channel) <Sencondary IDE channel> hard drive(master-device 0) -------
-
How do I manage Video Ram size
Hello, I would like to ask how do I adjust the size of video ram in OSX and windowsXP. I have read someone's post saying that it is not user changeable in OSX. if it is not changeable, when will it changeable to a larger size? How about in windowsXP?
-
I'm re-posting since my first post used wireless router and wireless access point interchangeably and got moved to the other forum... I am currently using a Linksys Wireless Router (WRT54G) at home with no encryption. The reason I'm doing this is bec
-
is there any Wed development IDE for Solaris 10? Except for neatbeans......