OPtion 3 speed dropped to under 1Mbps
I test my connection speed regulalry and get about 10Mbps from my Option 3 package.
However, for the last 3 days I have been getting under 1Mbps at all times of the day.
How can I get this fixed?
Thanks
Bob
Hi Jolly,
is this the information?
DSL Connection
Link Information
Uptime:
4 days, 13:11:55
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
1,235 / 1,151
Data Transferred (Sent/Received) [GB/GB]:
4.61 / 6.19
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
8.5 / 17.5
SN Margin (Up/Down) [dB]:
6.5 / 33.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
3 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
41 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 14
HEC Errors (Up/Down):
0 / 3
Line Profile:
Fast
Similar Messages
-
What happened to the "oldies" option on the drop down menu located on iTunes home page under music ?
What happened to the "Oldies" option on the drop down menu located on iTunes store home page under music ? I can not find songs in search using artist or song name.
Thank you, MartinRight click on the file and choose Get Info, go to the Options tab, there's a menu there "Media Kind"
-
Wireless speed dropping to 5.5Mbps
Hi Folks,
I like the ArchLinux distribution and have enjoyed it for a few years now.
But recently I noticed my wifi speed dropping like crazy, I reinstalled my router (DD-WRT) but that didn't fix anything.
So I tried something else, I booted to Windows and I found that I had normal speeds (54Mbps) during the span of an hour.
Afterwards I rebooted back to linux, and the speed immediately dropped to 5.5Mbps
This started about 1 or 2 weeks back, I'm guessing after some pacman update..
Are there any regression or new bugs known which affect my performance?
lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
lsmod | grep iw :
iwl3945 66405 0
iwl_legacy 45666 1 iwl3945
mac80211 189758 2 iwl3945,iwl_legacy
cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
lsmod:
Module Size Used by
cryptd 6901 0
aes_i586 6948 1
aes_generic 25678 1 aes_i586
coretemp 4374 0
btusb 9897 0
bluetooth 115465 1 btusb
arc4 1094 2
ecb 1645 2
iwl3945 66405 0
i915 557262 3
snd_hda_codec_analog 62068 1
iwl_legacy 45666 1 iwl3945
snd_hda_intel 19261 3
snd_hda_codec 66793 2 snd_hda_codec_analog,snd_hda_intel
mac80211 189758 2 iwl3945,iwl_legacy
drm_kms_helper 24245 1 i915
snd_hwdep 4919 1 snd_hda_codec
pcmcia 31566 0
drm 147653 4 i915,drm_kms_helper
snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
joydev 7535 0
tpm_infineon 6770 0
cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
psmouse 55927 0
sg 21022 0
uhci_hcd 19344 0
intel_agp 8664 1 i915
ehci_hcd 34847 0
ppdev 4822 0
firewire_ohci 25683 0
snd_timer 15542 1 snd_pcm
tg3 113936 0
i2c_algo_bit 4431 1 i915
parport_pc 27902 0
firewire_core 43390 1 firewire_ohci
iTCO_wdt 10333 0
snd 43527 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
intel_gtt 11417 3 i915,intel_agp
usbcore 119004 4 btusb,uhci_hcd,ehci_hcd
parport 26107 2 ppdev,parport_pc
agpgart 22160 3 drm,intel_agp,intel_gtt
yenta_socket 18846 0
soundcore 5018 1 snd
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
crc_itu_t 1077 1 firewire_core
evdev 7310 13
i2c_core 16665 4 i915,drm_kms_helper,drm,i2c_algo_bit
pcmcia_rsrc 8816 1 yenta_socket
iTCO_vendor_support 1553 1 iTCO_wdt
pcmcia_core 10154 3 pcmcia,yenta_socket,pcmcia_rsrc
libphy 14053 1 tg3
hp_accel 12892 0
lis3lv02d 8712 1 hp_accel
serio_raw 3430 0
pcspkr 1415 0
thermal 6603 0
hp_wmi 6602 0
container 1937 0
input_polldev 2446 1 lis3lv02d
sparse_keymap 2636 1 hp_wmi
fan 1910 0
rfkill 12510 3 bluetooth,cfg80211,hp_wmi
tpm_tis 6389 0
tpm 10037 2 tpm_infineon,tpm_tis
tpm_bios 4237 1 tpm
video 9852 1 i915
wmi 7367 1 hp_wmi
battery 8905 0
ac 2545 0
button 3654 1 i915
cpufreq_powersave 714 0
cpufreq_conservative 4325 2
cpufreq_ondemand 5064 0
acpi_cpufreq 5053 1
freq_table 2055 2 cpufreq_ondemand,acpi_cpufreq
processor 21884 3 acpi_cpufreq
mperf 1035 1 acpi_cpufreq
vboxdrv 177483 0
fuse 58669 3
ext4 334626 3
mbcache 4321 1 ext4
jbd2 59098 1 ext4
crc16 1077 2 bluetooth,ext4
sd_mod 25515 5
sr_mod 12956 0
cdrom 31341 1 sr_mod
ahci 18093 5
pata_acpi 2396 0
libahci 16581 1 ahci
ata_piix 18569 0
libata 154349 4 ahci,pata_acpi,libahci,ata_piix
scsi_mod 110670 4 sg,sd_mod,sr_mod,libata
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (GR680ET#ABH)/30C0, BIOS 68DDU Ver. F.10 01/11/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fe38000 - 7fff0000
[ 0.000000] Allocated new RAMDISK: 37646000 - 377fd9b5
[ 0.000000] Move RAMDISK from 000000007fe38000 - 000000007ffef9b4 to 37646000 - 377fd9b4
[ 0.000000] ACPI: RSDP 000f7150 00024 (v02 HP )
[ 0.000000] ACPI: XSDT bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS bf7e7d80 00040
[ 0.000000] ACPI: SLIC bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: APIC bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT bf7db997 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT bf7dc4da 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT bf7dc739 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT bf7dc7df 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2175MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bf7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf7b0
[ 0.000000] On node 0 totalpages: 784191
[ 0.000000] free_area_init_node: node 0, pgdat c14a3980, node_mem_map f5e55200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4352 pages used for memmap
[ 0.000000] HighMem zone: 552626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27648 r0 d21504 u2097152
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778063
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/d923fdbe-d6a8-4d2b-ab88-c36fcf8609bd resume=/dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6 ro i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 12548608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf7b0)
[ 0.000000] Memory: 3091000k/3137216k available (3380k kernel code, 45764k reserved, 1394k data, 524k init, 2227912k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14aa000 - 0xc152d000 ( 524 kB)
[ 0.000000] .data : 0xc134d1bf - 0xc14a9c00 (1394 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134d1bf (3380 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f480c000 soft=f480e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.171 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=6650570)
[ 0.003456] pid_max: default: 32768 minimum: 301
[ 0.003553] Security Framework initialized
[ 0.003616] AppArmor: AppArmor disabled by boot time parameter
[ 0.003695] Mount-cache hash table entries: 512
[ 0.003948] Initializing cgroup subsys ns
[ 0.006672] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.006747] Initializing cgroup subsys cpuacct
[ 0.006816] Initializing cgroup subsys memory
[ 0.006883] Initializing cgroup subsys devices
[ 0.006942] Initializing cgroup subsys freezer
[ 0.007001] Initializing cgroup subsys net_cls
[ 0.007060] Initializing cgroup subsys blkio
[ 0.007154] CPU: Physical Processor ID: 0
[ 0.007213] CPU: Processor Core ID: 0
[ 0.007272] mce: CPU supports 6 MCE banks
[ 0.007335] CPU0: Thermal monitoring handled by SMI
[ 0.007339] using mwait in idle threads.
[ 0.008424] ACPI: Core revision 20110316
[ 0.016678] ftrace: allocating 15225 entries in 30 pages
[ 0.020043] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056096] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] PEBS disabled due to CPU errata.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073434] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100007] CPU 1 irqstacks, hard=f48c8000 soft=f48ca000
[ 0.100009] Booting Node 0, Processors #1 Ok.
[ 0.100111] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196682] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203383] Total of 2 processors activated (7983.85 BogoMIPS).
[ 0.204342] devtmpfs: initialized
[ 0.204342] PM: Registering ACPI NVS region at bf7c5400 (142264 bytes)
[ 0.204342] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.204576] print_constraints: dummy:
[ 0.204692] NET: Registered protocol family 16
[ 0.204864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204937] ACPI: bus type pci registered
[ 0.205089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.205165] PCI: not using MMCONFIG
[ 0.207646] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
[ 0.207708] PCI: Using configuration type 1 for base access
[ 0.208277] bio: create slab <bio-0> at 0
[ 0.210299] ACPI: EC: Look up EC in DSDT
[ 0.253363] ACPI: SSDT bf7dbbdc 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.253972] ACPI: Dynamic OEM Table Load:
[ 0.254117] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.254418] ACPI: SSDT bf7dbee0 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.255665] ACPI: Dynamic OEM Table Load:
[ 0.255810] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.256209] ACPI: SSDT bf7dbb14 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.256814] ACPI: Dynamic OEM Table Load:
[ 0.256959] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.257214] ACPI: SSDT bf7dbe5b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.257803] ACPI: Dynamic OEM Table Load:
[ 0.257949] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.290050] ACPI: Interpreter enabled
[ 0.290115] ACPI: (supports S0 S3 S4 S5)
[ 0.290361] ACPI: Using IOAPIC for interrupt routing
[ 0.290441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.291123] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.291198] PCI: Using MMCONFIG for extended config space
[ 0.294937] ACPI: Power Resource [C27F] (on)
[ 0.295774] ACPI: Power Resource [C29B] (on)
[ 0.299470] ACPI: Power Resource [C1C5] (off)
[ 0.301813] ACPI: Power Resource [C3BC] (off)
[ 0.301942] ACPI: Power Resource [C3BD] (off)
[ 0.302067] ACPI: Power Resource [C3BE] (off)
[ 0.302193] ACPI: Power Resource [C3BF] (off)
[ 0.302318] ACPI: Power Resource [C3C0] (off)
[ 0.303130] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.303481] ACPI: No dock devices found.
[ 0.303540] HEST: Table not found.
[ 0.303600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.306875] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[ 0.313394] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.313457] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.313520] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.313593] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff]
[ 0.313666] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 0.313739] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.313824] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.313871] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.313886] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit]
[ 0.313896] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.313903] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
[ 0.313938] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.313951] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit]
[ 0.314042] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.314102] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
[ 0.314144] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.314204] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
[ 0.314261] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.314287] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff]
[ 0.314382] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.314388] pci 0000:00:1a.7: PME# disabled
[ 0.314418] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.314442] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit]
[ 0.314531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.314536] pci 0000:00:1b.0: PME# disabled
[ 0.314566] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.314655] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.314660] pci 0000:00:1c.0: PME# disabled
[ 0.314693] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.314785] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.314790] pci 0000:00:1c.1: PME# disabled
[ 0.314823] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.314915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.314920] pci 0000:00:1c.2: PME# disabled
[ 0.314954] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.315045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.315050] pci 0000:00:1c.4: PME# disabled
[ 0.315083] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.315143] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
[ 0.315185] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.315244] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
[ 0.315286] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.315345] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
[ 0.315401] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.315427] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff]
[ 0.315521] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.315527] pci 0000:00:1d.7: PME# disabled
[ 0.315554] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.315645] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.315763] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.315841] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
[ 0.315907] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.315986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.316100] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.316118] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.316131] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.316144] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.316157] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.316170] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
[ 0.316225] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.316253] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
[ 0.316266] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
[ 0.316279] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
[ 0.316292] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
[ 0.316304] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
[ 0.316317] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff]
[ 0.316368] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.316373] pci 0000:00:1f.2: PME# disabled
[ 0.316459] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.316523] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.316529] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.316538] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.316706] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280
[ 0.316763] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
[ 0.317108] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.317121] pci 0000:10:00.0: PME# disabled
[ 0.317225] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.317289] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.317295] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.317303] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.317441] pci 0000:18:00.0: [14e4:1693] type 0 class 0x000200
[ 0.317474] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
[ 0.317618] pci 0000:18:00.0: PME# supported from D3hot D3cold
[ 0.317624] pci 0000:18:00.0: PME# disabled
[ 0.317669] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
[ 0.317733] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.317739] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
[ 0.317747] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.317813] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[ 0.317876] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.317882] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
[ 0.317890] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.317950] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607
[ 0.317980] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
[ 0.318011] pci 0000:02:04.0: supports D1 D2
[ 0.318014] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.318020] pci 0000:02:04.0: PME# disabled
[ 0.318049] pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00
[ 0.318077] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff]
[ 0.318189] pci 0000:02:04.1: supports D1 D2
[ 0.318191] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.318197] pci 0000:02:04.1: PME# disabled
[ 0.318276] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.318342] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.318348] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
[ 0.318357] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.318360] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.318362] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.318365] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.318368] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
[ 0.318371] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.318373] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.318431] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.318540] pci_bus 0000:00: on NUMA node 0
[ 0.318544] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.318789] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
[ 0.318876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
[ 0.318931] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
[ 0.318991] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
[ 0.319052] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 0.319149] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.319210] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.337338] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
[ 0.337702] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.338019] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[ 0.338329] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
[ 0.338733] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[ 0.339050] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[ 0.339358] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
[ 0.339713] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110316/pci_link-184)
[ 0.339986] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.340072] vgaarb: loaded
[ 0.340231] PCI: Using ACPI for IRQ routing
[ 0.341816] PCI: pci_cache_line_size set to 64 bytes
[ 0.341936] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.342000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.342003] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
[ 0.342124] NetLabel: Initializing
[ 0.342182] NetLabel: domain hash size = 128
[ 0.342241] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.342313] NetLabel: unlabeled traffic allowed by default
[ 0.342386] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.342454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.342687] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.359996] Switching to clocksource hpet
[ 0.363130] Switched to NOHz mode on CPU #0
[ 0.363227] Switched to NOHz mode on CPU #1
[ 0.367148] pnp: PnP ACPI init
[ 0.367232] ACPI: bus type pnp registered
[ 0.367404] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.367407] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.367409] pnp 00:00: [mem 0x00100000-0xbf7fffff]
[ 0.367477] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.367541] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.367605] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
[ 0.367670] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.370899] pnp 00:01: [bus 00-ff]
[ 0.370902] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.370905] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.370907] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.370910] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.370912] pnp 00:01: [mem 0xbf800000-0xfedfffff window]
[ 0.370915] pnp 00:01: [mem 0xfee01000-0xffffffff window]
[ 0.370917] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[ 0.371021] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.371604] pnp 00:02: [io 0x0378-0x037f]
[ 0.371607] pnp 00:02: [io 0x0778-0x077a]
[ 0.371619] pnp 00:02: [irq 7]
[ 0.371622] pnp 00:02: [dma 1]
[ 0.371722] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.371803] pnp 00:03: [io 0x0560-0x056f]
[ 0.371806] pnp 00:03: [io 0x0570-0x057f]
[ 0.371808] pnp 00:03: [mem 0xfed40000-0xfed44fff]
[ 0.371843] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.371854] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.371860] pnp 00:04: [irq 13]
[ 0.371893] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371905] pnp 00:05: [io 0x0000-0x000f]
[ 0.371908] pnp 00:05: [io 0x0080-0x008f]
[ 0.371910] pnp 00:05: [io 0x00c0-0x00df]
[ 0.371912] pnp 00:05: [dma 4]
[ 0.371945] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371954] pnp 00:06: [io 0x0061]
[ 0.371988] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.371998] pnp 00:07: [io 0x0070-0x0071]
[ 0.372000] pnp 00:07: [io 0x0072-0x0073]
[ 0.372006] pnp 00:07: [irq 8]
[ 0.372045] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.372112] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.372148] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.372159] pnp 00:09: [io 0x0060]
[ 0.372161] pnp 00:09: [io 0x0064]
[ 0.372167] pnp 00:09: [irq 1]
[ 0.372202] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372215] pnp 00:0a: [irq 12]
[ 0.372255] pnp 00:0a: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active)
[ 0.372387] pnp 00:0b: [io 0x0010-0x001f]
[ 0.372390] pnp 00:0b: [io 0x0024-0x003f]
[ 0.372392] pnp 00:0b: [io 0x004e-0x004f]
[ 0.372394] pnp 00:0b: [io 0x0050-0x0053]
[ 0.372396] pnp 00:0b: [io 0x0063]
[ 0.372398] pnp 00:0b: [io 0x0065]
[ 0.372400] pnp 00:0b: [io 0x0067]
[ 0.372402] pnp 00:0b: [io 0x0074-0x0077]
[ 0.372404] pnp 00:0b: [io 0x0090-0x009f]
[ 0.372406] pnp 00:0b: [io 0x00a4-0x00bd]
[ 0.372408] pnp 00:0b: [io 0x0500-0x055f]
[ 0.372411] pnp 00:0b: [io 0x0800-0x080f]
[ 0.372413] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.372415] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.372486] system 00:0b: [io 0x0500-0x055f] has been reserved
[ 0.372549] system 00:0b: [io 0x0800-0x080f] has been reserved
[ 0.372611] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.372674] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.372737] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373400] pnp 00:0c: [irq 23]
[ 0.373462] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.373485] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.373487] pnp 00:0d: [io 0x1000-0x107f]
[ 0.373490] pnp 00:0d: [io 0x1100-0x113f]
[ 0.373492] pnp 00:0d: [io 0x1200-0x121f]
[ 0.373494] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.373497] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
[ 0.373499] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.373501] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.373503] pnp 00:0d: [mem 0xfed90000-0xfed99fff]
[ 0.373589] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.373651] system 00:0d: [io 0x1000-0x107f] has been reserved
[ 0.373713] system 00:0d: [io 0x1100-0x113f] has been reserved
[ 0.373775] system 00:0d: [io 0x1200-0x121f] has been reserved
[ 0.373837] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.373900] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.373964] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.374027] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.374090] system 00:0d: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.374153] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.375020] pnp 00:0e: [mem 0x000cee00-0x000cffff]
[ 0.375024] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
[ 0.375026] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.375112] system 00:0e: [mem 0x000cee00-0x000cffff] has been reserved
[ 0.375176] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.375238] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.375302] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.375317] pnp: PnP ACPI: found 15 devices
[ 0.375376] ACPI: ACPI bus type pnp unregistered
[ 0.411992] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.412067] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.412130] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
[ 0.412205] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.412279] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.412342] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
[ 0.412417] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.412479] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.412540] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.412604] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.412667] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.412734] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.412796] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
[ 0.412862] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.412928] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
[ 0.413007] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
[ 0.413069] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.413135] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
[ 0.413200] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.413280] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[ 0.413353] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.413419] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
[ 0.413484] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
[ 0.413565] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.413639] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.413702] pci 0000:02:04.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.413763] pci 0000:02:04.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.413825] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.413886] pci 0000:02:04.0: bridge window [io 0x5000-0x50ff]
[ 0.413952] pci 0000:02:04.0: bridge window [io 0x5400-0x54ff]
[ 0.414017] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.414093] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.414159] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.414221] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.414287] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
[ 0.414353] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.414442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.414508] pci 0000:00:1c.0: setting latency timer to 64
[ 0.414518] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.414583] pci 0000:00:1c.1: setting latency timer to 64
[ 0.414593] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.414658] pci 0000:00:1c.2: setting latency timer to 64
[ 0.414666] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.414732] pci 0000:00:1c.4: setting latency timer to 64
[ 0.414741] pci 0000:00:1e.0: setting latency timer to 64
[ 0.414751] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.414818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.414821] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.414823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.414826] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
[ 0.414828] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.414831] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.414834] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
[ 0.414836] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
[ 0.414839] pci_bus 0000:10: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
[ 0.414842] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
[ 0.414844] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
[ 0.414847] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.414849] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
[ 0.414852] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
[ 0.414855] pci_bus 0000:28: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
[ 0.414857] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.414860] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
[ 0.414862] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.414865] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.414867] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.414870] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.414872] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
[ 0.414875] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.414877] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.414880] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff]
[ 0.414882] pci_bus 0000:03: resource 1 [io 0x5400-0x54ff]
[ 0.414885] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.414887] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.414935] NET: Registered protocol family 2
[ 0.415062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.415368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.415894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.416143] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.416205] TCP reno registered
[ 0.416264] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.416330] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.416507] NET: Registered protocol family 1
[ 0.416583] pci 0000:00:02.0: Boot video device
[ 0.416785] PCI: CLS 64 bytes, default 64
[ 0.416838] Unpacking initramfs...
[ 0.451007] Freeing initrd memory: 1760k freed
[ 0.452054] apm: BIOS not found.
[ 0.452259] audit: initializing netlink socket (disabled)
[ 0.452332] type=2000 audit(1308999272.449:1): initialized
[ 0.452758] highmem bounce pool size: 64 pages
[ 0.452821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.455200] VFS: Disk quotas dquot_6.5.2
[ 0.455344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.455524] msgmni has been set to 1689
[ 0.455791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.456544] io scheduler noop registered
[ 0.456604] io scheduler deadline registered
[ 0.456686] io scheduler cfq registered (default)
[ 0.456882] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.456945] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.457031] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.457087] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.457173] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.457229] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.457316] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.457371] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.457576] intel_idle: MWAIT substates: 0x22220
[ 0.457578] intel_idle: does not run on family 6 model 15
[ 0.457584] ERST: Table is not found!
[ 0.457656] isapnp: Scanning for PnP cards...
[ 0.814935] isapnp: No Plug & Play device found
[ 0.815057] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.017338] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[ 1.019024] i8042: Detected active multiplexing controller, rev 1.1
[ 1.019854] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.019947] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.020050] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.020136] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.020222] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.020375] mousedev: PS/2 mouse device common for all mice
[ 1.020520] rtc_cmos 00:07: RTC can wake from S4
[ 1.041983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.043462] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.043553] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.043640] cpuidle: using governor ladder
[ 1.043698] cpuidle: using governor menu
[ 1.044008] TCP cubic registered
[ 1.044067] NET: Registered protocol family 17
[ 1.044133] Registering the dns_resolver key type
[ 1.044208] Using IPI No-Shortcut mode
[ 1.044349] PM: Checking hibernation image partition /dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6
[ 1.054023] PM: Hibernation image not present or could not be loaded.
[ 1.054029] registered taskstats version 1
[ 1.054676] rtc_cmos 00:07: setting system clock to 2011-06-25 10:54:34 UTC (1308999274)
[ 1.054790] Initializing network drop monitor service
[ 1.054922] Freeing unused kernel memory: 524k freed
[ 1.055268] Write protecting the kernel text: 3384k
[ 1.055352] Write protecting the kernel read-only data: 1032k
[ 1.071412] udevd[68]: starting version 171
[ 1.187956] SCSI subsystem initialized
[ 1.210300] libata version 3.00 loaded.
[ 1.213463] ata_piix 0000:00:1f.1: version 2.13
[ 1.213484] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.213591] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.213968] scsi0 : ata_piix
[ 1.214128] scsi1 : ata_piix
[ 1.214568] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[ 1.214632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[ 1.214903] ata2: port disabled. ignoring.
[ 1.373683] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
[ 1.386897] ata1.00: configured for MWDMA2
[ 1.392272] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
[ 1.398036] ahci 0000:00:1f.2: version 3.0
[ 1.398053] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.398174] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.398216] ahci: SSS flag set, parallel bus scan disabled
[ 1.398301] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.398376] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 1.398453] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.398893] scsi2 : ahci
[ 1.399132] scsi3 : ahci
[ 1.399311] scsi4 : ahci
[ 1.399475] ata3: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44
[ 1.399551] ata4: DUMMY
[ 1.399608] ata5: DUMMY
[ 1.453359] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.453425] Switching to clocksource tsc
[ 1.716689] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.718502] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.718578] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.718690] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.718695] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.719204] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
[ 1.719267] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.721104] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.721179] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.721289] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.721293] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.721801] ata3.00: configured for UDMA/100
[ 1.721984] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
[ 1.731236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.731315] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.731598] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.731702] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.731837] sd 2:0:0:0: [sda] Write Protect is off
[ 1.731902] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.845493] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 1.846050] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.761814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.051896] udevd[281]: starting version 171
[ 5.377558] fuse init (API version 7.16)
[ 5.559732] vboxdrv: Found 2 processor cores.
[ 5.559807] vboxdrv: fAsync=0 offMin=0x1d6 offMax=0x15ae
[ 5.559854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.559857] vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
[ 5.781012] ACPI: acpi_idle registered with cpuidle
[ 5.786645] Monitor-Mwait will be used to enter C-1 state
[ 5.786678] Monitor-Mwait will be used to enter C-2 state
[ 5.786684] Marking TSC unstable due to TSC halts in idle
[ 5.786717] Switching to clocksource hpet
[ 6.051738] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 6.051745] ACPI: Sleep Button [C2BF]
[ 6.051804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.051865] ACPI: Lid Switch [C153]
[ 6.051938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.051942] ACPI: Power Button [PWRF]
[ 6.057265] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.066477] ACPI: AC Adapter [C239] (on-line)
[ 6.114690] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.114702] ACPI: Battery Slot [C23B] (battery present)
[ 6.114779] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.114785] ACPI: Battery Slot [C23A] (battery absent)
[ 6.115381] wmi: Mapper loaded
[ 6.172603] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
[ 6.265090] ACPI: Fan [C3C1] (off)
[ 6.265157] ACPI: Fan [C3C2] (off)
[ 6.265220] ACPI: Fan [C3C3] (off)
[ 6.265284] ACPI: Fan [C3C4] (off)
[ 6.265348] ACPI: Fan [C3C5] (off)
[ 6.379163] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.397190] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 6.463770] hp_accel: hardware type NC6710x found
[ 6.513243] iTCO_vendor_support: vendor-support=0
[ 6.570412] lis3lv02d: 12 bits sensor found
[ 6.580235] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.580238] ACPI: Thermal Zone [TZ3] (41 C)
[ 6.803030] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
[ 6.831034] Linux agpgart interface v0.103
[ 6.886604] usbcore: registered new interface driver usbfs
[ 6.886833] usbcore: registered new interface driver hub
[ 6.890217] usbcore: registered new device driver usb
[ 6.901294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.901393] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 6.901464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.926164] tg3.c:v3.117 (January 25, 2011)
[ 6.926184] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.926195] tg3 0000:18:00.0: setting latency timer to 64
[ 6.930903] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 6.930908] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 6.930913] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 6.930922] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 6.930926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[ 6.938390] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
[ 6.938393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff
[ 6.938409] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
[ 6.938412] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
[ 6.963502] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.990831] ppdev: user-space parallel port driver
[ 6.995198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.995231] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.995250] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.995254] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.995285] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 7.000019] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 7.006712] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.011560] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.011583] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000
[ 7.023711] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.023894] hub 1-0:1.0: USB hub found
[ 7.023900] hub 1-0:1.0: 4 ports detected
[ 7.024015] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.024029] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.024034] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.024044] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 7.024158] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 7.033900] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.037377] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.041256] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.041277] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000
[ 7.053398] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.053920] hub 2-0:1.0: USB hub found
[ 7.053926] hub 2-0:1.0: 6 ports detected
[ 7.054087] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 7.054200] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 7.054704] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 7.055143] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 7.055302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.055312] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.055317] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.055329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 7.060031] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 7.063576] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
[ 7.063770] hub 3-0:1.0: USB hub found
[ 7.063775] hub 3-0:1.0: 2 ports detected
[ 7.063872] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.063881] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.063886] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.063894] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 7.073405] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
[ 7.073562] hub 4-0:1.0: USB hub found
[ 7.073566] hub 4-0:1.0: 2 ports detected
[ 7.073657] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.073665] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.073671] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.073679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 7.083408] parport_pc 00:02: reported by Plug and Play ACPI
[ 7.083486] parport0: PC-style at 0x378 (0x778), irq 7
[ 7.083667] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[ 7.083832] hub 5-0:1.0: USB hub found
[ 7.083837] hub 5-0:1.0: 2 ports detected
[ 7.083930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.083938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.083942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.083951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 7.084066] , dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.094562] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.094640] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.096796] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 7.096914] Registered led device: hp::hddprotect
[ 7.096935] hp_accel: driver loaded
[ 7.097080] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[ 7.097249] hub 6-0:1.0: USB hub found
[ 7.097254] hub 6-0:1.0: 2 ports detected
[ 7.097349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.097362] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.097366] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.097374] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 7.112415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[ 7.112609] hub 7-0:1.0: USB hub found
[ 7.112614] hub 7-0:1.0: 2 ports detected
[ 7.120662] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 7.121675] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1c:c4:c6:6f:ad
[ 7.121680] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 7.121684] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 7.121687] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 7.208882] cfg80211: Calling CRDA to update world regulatory domain
[ 7.380385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 7.382688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 7.383693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.384516] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.385421] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 7.385491] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 7.385557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 7.385625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 7.510546] thermal LNXTHERM:01: registered as thermal_zone1
[ 7.510549] ACPI: Thermal Zone [TZ4] (23 C)
[ 7.526773] firewire_core: created device fw0: GUID 00023f99299d0810, S400
[ 7.532557] [drm] Initialized drm 1.1.0 20060810
[ 7.582098] thermal LNXTHERM:02: registered as thermal_zone2
[ 7.582101] ACPI: Thermal Zone [TZ5] (22 C)
[ 7.600111] thermal LNXTHERM:03: registered as thermal_zone3
[ 7.600115] ACPI: Thermal Zone [TZ0] (51 C)
[ 7.603276] thermal LNXTHERM:04: registered as thermal_zone4
[ 7.603279] ACPI: Thermal Zone [TZ1] (49 C)
[ 7.670060] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 7.733614] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 7.733621] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 7.733637] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.733698] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.733729] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.856415] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 7.856421] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 7.897114] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 7.911295] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.948997] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.949004] i915 0000:00:02.0: setting latency timer to 64
[ 7.962188] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 7.962194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.962196] [drm] Driver supports precise vblank timestamp query.
[ 8.070059] usb 5-2: new full speed USB device number 2 using uhci_hcd
[ 8.090218] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.090555] [drm] initialized overlay support
[ 8.104983] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 8.104986] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 8.105051] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.105066] iwl3945 0000:10:00.0: setting latency timer to 64
[ 8.160258] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.160262] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.160407] iwl3945 0000:10:00.0: irq 47 for MSI/MSI-X
[ 8.160646] Registered led device: phy0-led
[ 8.253535] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.476535] fbcon: inteldrmfb (fb0) is primary device
[ 8.521567] Console: switching to colour frame buffer device 160x50
[ 8.525923] fb0: inteldrmfb frame buffer device
[ 8.525925] drm: registered panic notifier
[ 8.526564] cfg80211: World regulatory domain updated:
[ 8.526567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.526570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.526573] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.526576] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.526578] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.526581] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.527338] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110316/exoparg2-418)
[ 8.527351] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f4833588), AE_AML_PACKAGE_LIMIT (20110316/psparse-536)
[ 8.527361] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110316/video-1148)
[ 8.528072] acpi device:01: registered as cooling_device7
[ 8.528588] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 8.528684] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[ 8.529162] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.024454] cfg80211: Calling CRDA for country: NL
[ 9.027257] Bluetooth: Core ver 2.16
[ 9.027284] NET: Registered protocol family 31
[ 9.027286] Bluetooth: HCI device and connection manager initialized
[ 9.027289] Bluetooth: HCI socket layer initialized
[ 9.027291] Bluetooth: L2CAP socket layer initialized
[ 9.028560] Bluetooth: SCO socket layer initialized
[ 9.032087] cfg80211: Regulatory domain changed to country: NL
[ 9.032091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.032253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.032256] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.032258] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.032261] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 9.074179] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.074571] usbcore: registered new interface driver btusb
[ 10.265890] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.367394] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.429791] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.622332] Adding 3421840k swap on /dev/sda2. Priority:-1 extents:1 across:3421840k
[ 15.937897] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 15.937979] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 21.256096] iwl3945 0000:10:00.0: loadThe solution which is working for me is the following.
Create the following file:
/etc/modprobe.d/iwl3945.conf
And put the following in it:
options iwl3945 disable_hw_scan=0
Of course the file name in modprobe.d can be different but must end with .conf
via: http://ubuntuforums.org/showthread.php?t=1837729 -
I'm sorry if this has been posted before but it could of taken a while to find a thread on exactly the same subject as mine
I got BT Broadband, Option 3 last month. When I signed up I was told I could get upto 7.5MB download speeds and for the last month I have been getting speeds of around 5 - 6.9MB which I was very happy about but over the last few days I have seen my speed drop to around 1.7 - 1.9MB and in 1 case as low as 0.7MB.
My phone still works so I don't think there is a problem with my phone line, I don't believe there is a problem with my router but just so you know I have the HomeHub 2.0
. I recently did a speed test on the BT website and it claims I can get upto 8MB which is 0.5 more than a month ago so is it possible that the exchange has had some work done on it and it will just take a few days for things to get back to normal? I would appreciate any help that you could give meDownload speedachieved during the test was - 1313 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
ADSL line status
Connection Information
Line state
Connected
Connection time
0 days, 14:08:16
Downstream
8,128 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
12.6 dB / 25.0 dB
Line attenuation (Down/Up)
14.6 dB / 6.0 dB
Output power (Down/Up)
15.3 dBm / 1.8 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
2126 / 0
CRC Errors (Down/Up)
2 / 0
HEC Errors (Down/Up)
59 / 0
Error Seconds (Local/Remote)
2 / 0 -
Help! This new version of Lion is making me miserable. The fan runs constantly, the computer is hot and battery life has dropped to under 2 hours on a fully charged battery. I updated yesterday, nothing but misery today. Even running the mail program alone make the fan run like I have everything open. Using Pages, iPhoto, and iTunes simultaneously makes the computer blistering hot.Yesterday, I could use all three without any trouble. Any suggestions to either jettison 10.7.3 or how to fix without any expense? I haven't modified this computer at all, it is as it came from the box in August 2011: 2.3 GHz Intel Core i5, 4GB 1333 Mhz DDR3.
I updated to Lion 10.7.3 and started noticing my fans running on high all the time and my battery would drain 2-3x faster. I was going to take my computer into an Apple store until I found this thread. I did the SMC reset by shutting down my computer, plugging it in, and then pushing down shift+control+option while also pushing down the power button. Nothing happens on the screen and the computer did not turn on. I then released all the buttons at once after holding them down for 10 seconds.
After that, I simply turned my computer back on and everything seems to be working fine. The fans are not blasting anymore. I have a newer MacBook Pro where I can't access my batteries. The SMC reset may differ for other types of laptops. -
Running 3.6.12 on Windows XP in my brand-new HP 6000 Pro, and when I double-click the gold star to bookmark a site, 5 of my 80-odd folders appear in the drop-down under Bookmarks Menu. But then, when I click "Choose", no list of current bookmarks appears, so I have to bookmark every time under "Unsorted", then drag each bookmark to its correct folder. What am I doing wrong? I use Firefox on my other 2 systems, and every folder appears on the drop-down, just like it should.
I don't use Xmarks, so I don't know whether that is a factor here...
If you use Ctrl+d on a bookmarked page, does the Edit Bookmark dialog appear?
Firefox doesn't have a convenient way to determine the location of a bookmark. One workaround is to use the extension [https://addons.mozilla.org/firefox/addon/show-parent-folder/ Show Parent Folder] to add a column in the Library dialog showing the location of a bookmark. Then when you use the search function or Recently Bookmarked query, you should be able to discover the location.
The extension shows just the folder name by default. If that isn't unique enough, you can change a setting for the extension so it shows the full path down to that folder. To set this, open the Add-ons page, Extensions category, and use the Options button for Show Parent Folder. -
I want to Save As a PDF every time, no options in a drop down
Recently got a new computer, and now when I save a PDF under a different name (protocol reasons) when I click on Save As it gives me a list of options in a drop down box: Reduced size PDF, Certified PDF, Reader extended PDF, Optimized, Image, Word, etc.
Is there a way to set a default in Preferences or somewhere so it will save as a PDF every time? I would rather spend the time looking for a way to save my PDF as a different kind of file then spend the time selecting PDF whenever I save a PDF under a different name.
Even just hitting A, then P is getting to be a pain.
Adobe Acrobat ProI don't see a Save As Other
I attached a screen shot of what is there -
I have had Infinity option 2 for around 3 months and all has been fine until the past week.
I usually get 76MB down and 20MB up
the past week the speed has dropped to 70mb down and 19mb up for no apparant reason.
I am on the BT homehub 5 and its connected directly to the master socket.
I live aprox 150 meters from the street cabinet.
There has been a lot of "resolving host" and page load errors the past week or 2 as well.
1. Product name:
BT Home Hub
2. Serial number:
+xxxxxxxxxxxxxxxxxxxxxx
3. Firmware version:
Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated 25/07/14
4. Board version:
BT Hub 5A
5. VDSL uptime:
0 days, 15:37:00
6. Data rate:
19999 / 71651
7. Maximum data rate:
25938 / 71481
8. Noise margin:
15.2 / 6.3
9. Line attenuation:
0.0 / 14.7
10. Signal attenuation:
0.0 / 14.7
11. Data sent/received:
229.6 MB / 3.5 GB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTInfinity2-AP2SD
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS enabled
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 2.4 GHz Wireless network/SSID:
BTWifi-with-FON
19. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS disabled
20. 2.4 GHz Wireless security:
None
21. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
22. 2.4 GHz Wireless network/SSID:
23. 2.4 GHz Wireless connections:
Disabled
24. 2.4 GHz Wireless security:
None
25. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
26. 2.4 GHz Wireless network/SSID:
BTWifi-X
27. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS disabled
28. 2.4 GHz Wireless security:
WPA and WPA2
29. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
30. 2.4 GHz Wireless network/SSID:
31. 2.4 GHz Wireless connections:
Disabled
32. 2.4 GHz Wireless security:
None
33. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
34. 5 GHz Wireless network/SSID:
BTInfinity2-AP2SD
35. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
36. 5 GHz Wireless security:
WPA2
37. 5 GHz Wireless channel:
Automatic (Smart Wireless)
38. 5 GHz Wireless network/SSID:
BTWifi-with-FON
39. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS disabled
40. 5 GHz Wireless security:
None
41. 5 GHz Wireless channel:
Automatic (Smart Wireless)
42. 5 GHz Wireless network/SSID:
43. 5 GHz Wireless connections:
Disabled
44. 5 GHz Wireless security:
None
45. 5 GHz Wireless channel:
Automatic (Smart Wireless)
46. 5 GHz Wireless network/SSID:
BTWifi-X
47. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS disabled
48. 5 GHz Wireless security:
WPA and WPA2
49. 5 GHz Wireless channel:
Automatic (Smart Wireless)
50. 5 GHz Wireless network/SSID:
51. 5 GHz Wireless connections:
Disabled
52. 5 GHz Wireless security:
None
53. 5 GHz Wireless channel:
Automatic (Smart Wireless)
54. Firewall:
Default
55. MAC Address:
40:f2:01:18:1e:9c
56. Software variant:
57. Boot loader:
Solved!
Go to Solution.It could be this crosstalk, I have been the only one in the area to have Fibre, but 2 neighbors have just had it installed in the last 2 weeks.
Thankfully I was told by BT that I could attain between 70-76MB so if it drops again Ill back on to them I guess.
*(EDIT) Actually looking at my logs I have a screnshot of the speed estimate when I first signed up for the service to be 76-80MB and 20MB up.
Max attainable data rate has gone from 76xxx / 90xxx to - 25xxx / 71xxx
Ill be keeping a close eye on this for sure.
It may not seem like a large drop, but going from 76mb to 70mb results in a speed drop of around 12-15% my download speeds were 9MB/s they are now 8MB/s.
This also answers the lack of feedback from the forum reps and moderators I guess as a known problem they just keep sthum about it.
Kinda discusting really.
So afaik they are already in breach of their contract I signed up for? -
I have recently downloaded iOS 8 and there is no longer a Print Option in chrome drop down menu
Since I down loaded iOS 8 there is no longer a print option in the drop down menu of my Chrome Browser. Under the 3 horizontal lines in the right hand corner ?
You did not say if you installed a carrier update. Are you using an unlocked phone? Does your carrier require you to manually set your APN settings? If you do not know what it is then you don't. Have you checked with your carrier? An MMS with iMessage is handled differently than an MMS with the carrier. Since your iMessage is working, contact your carrier and have them check the provisioning on your account. They may need to do a reset on their end, since SMS/MMS is a carrier function.
-
Up to 17Mbps advertised - under 1Mbps delivered!
Can anybody please help?!!
I switched to BT about 7 weeks ago and initially I received 2-4Mbps depending on the time of day. Despite this being only a fraction of the 17Mbps they advertise I was happy because I could watch iPlayer.
A few days ago my connection slowed down to under 1Mbps regardless of the time of day, and not only is it completely unacceptable but also incredibly frustrating! I have tried everything. I've plugged into the test socket, I've reset the router, unplugged the phone, but I can't get the speed back up to an acceptable level. I'm only 300m from the exchange.
Here are the results from the BT Speedtest:
Download speedachieved during the test was - 363 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :1149 Kbps(DOWN-STREAM), 1059 Kbps(UP-STREAM)
IP Profile for your line is - 10000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 61.69:4.67:33.76 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
>Upload speed achieved during the test was - 866 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1059 Kbps
I know it's only sold on an 'up to' basis, but under 1Mbps is hardly anywhere near 'up to' 17Mbps! It's flagrant false advertising surely? Why not say up to 1,000,000Mbps - it's about as achieveable!
I need to get my broadband up to a workable speed asap, is there anything I can or BT will do?
Many thanks,
Simon
Solved!
Go to Solution.Thanks John,
Here are my results:
Line state
Connected
Connection time
0 days, 0:29:12
Downstream
1,152 Kbps
Upstream
1,183 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
32.9 dB / 6.3 dB
Line attenuation (Down/Up)
13.0 dB / 2.7 dB
Output power (Down/Up)
0.0 dBm / 12.3 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
0
I hope this makes some sense to you!
Thanks,
Simon -
I have a powerbook and when i first got it and went to burn a dvd i had the option of a drop down menu box and it would show up to 8x for burning. Using the same media when i go to burn in the box it just goes to 2x anyone have a clue as what happen?
Thanks
PaulIn Toast you can select the burn speed you want up to the maximum your Superdrive will allow.
But there is a lot to be said for using lower burn speeds: 2x or 4x max.
Using 16x DVD media is fine - in fact it is difficult to buy any other - but there is a consensus in the Apple Support Forums that a slower burn is a better burn and that the most reliable brands are Verbatim, Maxell and Fuji, all DVD-R, burned at 2x or 4x (slow burns are better burns!). I always use Toast for burning.
I generally use Verbatim and when I can't get those, Fuji, and have never had a coaster from either.
Plenty of coasters in the early days from Sony, TDK and a few others.
The term "Best" means the fastest speed that the drive told Toast it can write to a specific disc. The drive's firmware and info on the disc decide what speed burns are available. When you press the speed setting button in Toast (after inserting a disc) you'll likely see some speeds in italics and some in bold face. The ones in bold face are supported by that media on that drive. The fastest one is what Toast calls Best.
Audio CDs in particular should be burned at the lowest supported speed.
Verification is a good indicator the disc is burned okay. However, other DVD players can still have problems with the disc. Media problems with various drives is not uncommon. Slower burning may reduce the chance of those problems, and is one of the reasons why RW (read/write) media is always rated slower than DVD-R.
There are some interesting facts here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm and here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm
But many will tell you that the 'slower burn is best' theory is outdated, as in this useful article:
http://www.digitalfaq.com/guides/media/dvd-media-concepts.htm
Who really knows? At the end of the day, if your home-made DVD was verified by Toast and will play anywhere on anybody's DVD player, then that is the result we are all after! -
Broadband speed drops from 4mb to less than 0.5mb ...
Hello forum readers,
I am having speed problems since early December where during the day time my download speed is 4mb. However, after 7:30pm the speed then drops very quickly to below 0.5mb. I did a speed test just now and it is:
Download speedachieved during the test was - 268 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :5344 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 4500 Kbps
I have tried calling India technical support, all I got was "we are looking into the problem" over the weeks. Very frustrating as it is so difficult to understand them. They keep giving me excuses as to the causes. Today I am told there is a problem with the exchange. I asked when can this be fixed by, the response was they are not going to fix it as the equipment is very expensive to replace.
I am so frustrate by all their so uncaring attitude that I have obtained a MAC code tonight. Will a different provider be any different if the problem is with the exchange?
Has any forum readers experience this speed dropping problem? I can understand if the speed drops due to higher demands in the evening, but with this slow speed it is impossible to use the internet for anything meaningful as a web page took over 40 seconds to load.
I am on the unlimited Option 3, and my exchange is Poplar, London.
Is there a BT moderator on this forum who can help me resolve this speed problem please?
Thanks.Hello peeps,
An update on my slow down boardband connection...
I have reported the problem to "No Help Indian Technical Support" since 11 December, still no resolution!
I was told to wait until the end of February as work on the exchange may take place to increase capacity. Nobody called to update me on what is happening since my last post. Called Indian support for an update (17 March) only to be told my case was closed and problem resolved on the 28 February!
Then I asked to speak to a supervisor and the guy literally cut me off. All I wanted to ask was why they think the problem was resolved when I am still getting the same slow down every evening. I tried calling them again, but useless idiots who would make you answer their scripts again, but still they can't give me an update or what are they going to do about the problem.
I am at a loss in how to obtain an update from them. I am sure many of you who have the experience of calling Indian will end up with frustrations. They will try their best to ignore you especially with questions they have not a clue in answering. Every time they say they will call back, but no they don't.
Why is BT technical support be handled by such non-technical idiots? The minute they have ran of scripts to follow then you are speaking to a blank wall.
Anyone here know of a complaint number I can call or email?
Thanks. -
does anybody know why my actual speed is far less than when i first had infinity installed.i have rang several times and spoken to an advisor but am non the wiser.for the first few months i was on 18mb download as i was estimated (slow area),then for months since i am now on 10mb.after phone calls and resets it goes back up again for a few hours then just drops right down again.advisers never give me an explanaition.im pretty sick of paying all this money for unlimited infinity when my speeds dropped so much,was quite happy with 18 download
As usual, visiting this site is a waste of time. 'Connect via ethernet cable' to do a test. Oh, yes, I'll just send my new tablet back and ask for something put on the market in the 20th century so that I can check my rubbish BT Infinity connection.
My BT Infinity connection is rubbish. It was always awful, but now it's rubbish. If I do a series of speed tests using Speedtest.net seconds, minutes, hours or days apart, the results are all over the place. One moment I can get 6mbps (which is good for me), then it is 0.6, then 20, then 8, and maybe once a day I can stubble upon a 36 or 48. (Once, it was over 50.)
It is not possible to watch TV on my computer, as it stops to wait or stream for 5 seconds out of every 15 seconds of broadcast. That's unusable.
The switch from awful to rubbish coincided with my phone connection going off for a day (broadband was still on). The phone came back, then went off again, then came back. The line is so noisy at times that I have to terminate calls, and I am told that sometimes dialing my number results in nothing happening at all.
I have already wasted a couple of hours mucking about on BT sites, clicking that and clicking that, and anything that purports to do any sort of test comes back saying all is well. Well, well it isn't.
And now that I have no site hosting option at BT I have no reason to stay with BT.
I'll keep a record of my speeds, refuse to pay for a service I am not getting, demand a refund (talk to the legal department: they just love to talk about contracts and consumer law and all that sexy stuff), then go to another provider.
UNLESS, a BT modertator reads this, decides that BT should really provide a decent service to the people who pay for it, and put my so-called Infinity service to a speed that is over 50mbps 9 out of every 10 times I check it, never dropping below, let's say, 20. That would be satisfactory.
By the way, when I was on my previous tarrif, BT told me that I would make a saving switching to Infinity. My bills are almost double what they were. -
Drop down under the apple not opening...
I can get the drop down under Finder and the other options but then I click on the apple it highlights it but doesn't open the drop down.
Hi c,
I hope a brody won't mind if I make a suggestion. PRAM deals with the "Menu blink count." I do not know if your MBP's issue is related, but it sounds close enough that I would try a PRAM Reset. It will only take a minute, and if it doesn't work, nothing hurt. If it does, you're all set. -
Fibre speed drop this weekend 4th & 5th July 2015.
My monthly average according to SamKnows is 27.33 Mbps. At 23.00 Friday 3rd July it was 28.01 Mbps.But by 0500 Saturday 4th July it was 12.12 Mbps.By 1900 on the 4th it was 9.81 Mbps.But at 0900 Monday 6th it is back at 29.54 Mbps.Why when I do get speed drops it seems to always be at weekends?
It could be a number of reasons from exchange congestion which would be more noticable at the weekends when more people are using the service during the day/evening or it could be planned/unplanned maintenance at the exchange or even excess wireless interference(if your only using wireless connections).
If its constantly slow every weekend then it points more towards congestion/interference than maintenance Sky can help with congestion so reporting it to them directly would be your only option,if its wireless interference then there is nothing Sky can do to help.
You will need to report it to Sky
Maybe you are looking for
-
Hi All, I have set the content type to text/html by using the following statement in jsp <%@page contentType=�text/html�%>And if I give out.println("<a href="aaa.do">Click here</a>"); it is showing me a link to click here that's fine. But my problem
-
Unzip file using operating system command in file/ftp receiver adapter
Hi, I'm wonderdering how to unzip a zip-file in the receiver file/ftp adapter. I know it is possible to do it using the 'Operating system command' feature, but somehow the command I use seems to be ignored! (I'm using SP14, unix). The command I enter
-
When I am triggering the DTP, job is not getting started but it automatically getting cancelled. Any help..
-
Hi- About 6-8 months ago I bought a 1GB RAM chip to max out my G4 iBook to 1.5, and it worked flawlessly. No problems. Recently I noticed some strange performance issues, so I checked the Apple System Profiler, and was surprised that now only the on-
-
Hi everybody: Thank you for read my message. I want to select a layout or a combination of layouts that matches the way that "motif" does. I am not sure if motif has several ways to layout widgets, but the one that I want to match is the option where