Option Activate Applications in Client not found in GRC 10.0

Hi Experts,
Have installed SAP GRC NW Plug-in and I was not getting options to activate access Controls.
I am only getting options for Access Controls are Maintain Plug-in Exits Settings and Maintain Plug-in Configuration Settings.
As per the installation document I should get the following options :
Governance, Risk and Compliance > General Settings node
                                                                                1.Activate Applications in Client
                                                                                2. Maintain Languages Supported
                                                                                3. Setup Transport Connection
Can you please let me know if I am doing anything wrong on installation.
Thanks
Mani

Hi Mani,
Please have a look at the pre and post installation guides available here:
SAP Access Control 10.0 [original link is broken]
Regards,
Luis

Similar Messages

Kinit: Client not found in Kerberos database while getting initial credentials

Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank you

Hi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain.

Report Application Server was not found

Post Author: dgindy
CA Forum: Deployment
Product: Crystal Reports
Version: XI
Patches Applied:
Operating System(s): Windows 2003 Server
Database(s): SQL 2000
Error Messages: " An Enterprise Report Application Server was not found. "Steps to Reproduce:
So we have an existing CR 9 reports application server on a different system . We are trying to migrate over to crystal report 11 with out affecting it. I modified our .Net web application and uploaded it to the server. This is the error I'm currently getting. We have Enterprise XI install on the server so i'm stumped
Any Ideas?
Thanks
D

Hi Fade,
Ah, the SDK for CR for VS is not what you want. What you need to do is log into Service Market Place and go to the appropriate download section. The SDK is NOT installed as in previous versions with Crystal Reports Designer, it's a separate download now.
I assume you are also using CRSE 2013 then so you get the SDK from SMP:
Then in the list you'll see .NET installer for SP 1 or SP 2, you must use the same patch level as the Server:
If you don't see this option then please contact your account manager to give you access to SMP and the download section.
If you are not set up you will not be able to see the above.
Thanks
Don

System attribute "Client" not found.

I try to setup connection to my BW and R/3, and still not able to make it work.
And i have map the user id too.
fro the support menu ->system landscape cockpit , i do these :
Check for launching WinGUI and PlatinGUI transactions
System attribute "Client" not found.
Error in the connection data for launching WinGui and PlatinGui transactions.
--> found MessageServer=192.168.5.61
Test failed.
Skipping test for WebGUI transactions, Easy Web Transactions and BW 2.x objects
Check for launching BSP and BW 3.x objects
System attribute "Client" not found.
No protocol defined for the WebAccessPoint.
The host name for the WebAccesPoint has no value.
Test failed.
Is is suppose to be this painfull to setup connection to SAP system ?
Thank you very much..

Hi,
First answer to you question is: Not at all.
Follow the below steps to create R/3 system.
1. Create R/3 system in the System Adminstration->System Configuration by choosing R/3 Connect via Connection String.
2. Then enter the following properties.
Connection String to Application : <Application server>
Logon Method : <UIDPW>
SAP Client: <clinenumber>
SAP System ID:
SAP System NUmber:
System Name:
System Type:
3.Create System Alias
4.User Mapping
5. Test Connection.
Thanks,
Ramakrishna

Error message when installing iTunes on Windows 7, "Apple Application Support was not found, Error 2"

I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes and then install iTunes again. Error 2. After this I

So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2

I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Unable to Reinstall iTunes - error message: "Apple Application Support was not found"

When attempting to update my iPhone today, my iTunes would not open. I followed the instructions to completely uninstall iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Applications Support. I then attempted to reinstall iTunes, and everything went perfectly until I attempted to open iTunes. When attempting this, I am receiving the message "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2). Any advice on how to "get this back"?

Read through the user ip http://discussions.apple.com/docs/DOC-6562 for the best solution.

I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

When I download Itunes I get an error that my apple application support was not found how do I fix this error

I have downloaded, uninstalled and redowloaded Itunes about 50 times and I continue to get the error that my apple application support was not found and that I should uninstall and reinstall Itunes. I can not get to my music and this is starting to really make me mad. Can anyone (other than some bogus virus filled program) give me a hint as to how I can fix this so I can play my music?

Hi jahhaas,
Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
http://support.apple.com/kb/HT1923
Cheers,
GB

It says this when I try to open iTunes: Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 I've tried uninstalling it and installing it several t

It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FD

You have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer.

I'm getting the error msg "apple application support was not found. Apple application support is required to run itunes. error 2. How can i fix this?

Hi, I was running itunes software just fine. I got some malware and unintalled everything that was from apple. Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
What can I do to fix this?
Thank you.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Apple Application Support was not found help!!!!!

A few days ago i got on iTunes but this error message came up saying
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall
iTunes, then install iTunes again.
Error 2 (Windows error 2)
I have looked at many discussions and forum posts and most of them say to extract the itunes setup with winrar
but i cannot see where it says to extract all i see is add to and compress.
Please help me!!! I run windows 7 on an Acer laptop if this means anything. It would be highly appreciated thank you!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

ITunes wont load Apple Application Support was not found

I have been having a lot of trouble downloading itunes. I had it on my laptop and then the laptop crashed. I tried to re-install,and it goes smooth then at the end. I get a window message that has a red and white X that says:
Apple Application Support was not found
Apple Application Support is required to run iTunesHelper. please unistall iTunes, then install iTunes again.
Error 2
ok
Can anyone help me PLEASE?
Thanks

With that one, let's try uninstalling both iTunes and Apple Application Suppport. When we reinstall iTunes, that should reinstall Apple Application Support as well. We'll take a few additional explicit precautions along the way too. Best to print these instructions out, because at one stage of proceedings you won't be able to use a web browser.
Preliminaries
Download and save a fresh iTunes installer to your hard drive. (Don't run the install on line and don't start the iTunes install just yet.)
http://www.apple.com/itunes/download/
Now, quit QuickTime (if you have that open) and Safari 4.0.4 (if you have that installed and open). Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open.
*Uninstall phase*
Head into your "Add or Remove Programs" control panel. Uninstall iTunes. Uninstall Apple Application Support (if it is listed in there).
(From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
Next we'll remove any leftover program files and folders.
(1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
(2) Open the "Program Files" folder.
(3) Right-click on the iTunes folder (if it still exists) and select "Delete".
(4) Open the "Common files" folder.
(5) Open the "Apple" folder.
(6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
Now empty your Recycle Bin and restart the PC.
*Reinstall Phase*
After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
Now start the install by doubleclicking the iTunesSetup.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Did the install seem to go through okay? If so, does iTunes start launching properly again?

TS1363 Trying to load my new Ipod Nano onto my pc. Have tried numerous times to load however after having gotten the ITunes download and attempting 2then load onto Nano get an "Error 2" message along w/"Apple Application Support was not found". Using Win

Trying to load my new I Pod Nano onto my pc. Have tried numerous times and keep getting same message..."Error 2...Apple Application Support was not found. When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
Any assistance would be greatly appreciated.

When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now?

Option Activate Applications in Client not found in GRC 10.0

Similar Messages

Maybe you are looking for