Option for 4:3 Display, on W Series?

Does anyone know whether there is an option to customize a W Series ThinkPad with a 4:3 display?
Thanks.

No.
Never was and there never will be.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Graphics card options for 3x 2560x1440 displays

Point of cosideration:
Currenty have a 5770
Currenty have 3x 27" displays (WQHD). They have DP and DL/DVI so no adapters are needed even on a single card array
Display seems slightly laggy under certain conditions since upgrading my monitors
Would like to improve gaming performance in mac and bootcamp
Considering 5870, 2nd 5770, or 6870 (open to suggestions)
I don't want to run custom drivers or flash a card. My system is used primarily for development so as close to Apple approved spec is best for debugging. However since I hear Lion/ML added support for certain PC cards (6870 specifically) I'm considering that for the cost/performance gains since it shouldn't break with OS updates, etc.
Not interested in discontinued models, used, ebay, etc. as a means for a secondary display card.
Cost is a factor but not the only one. If the 5870 is a better peformance option all around than a 2gb 6870 then it's price is justified since it's also a standard Apple config.
Would 2x5770 be better for day to day work (photoshop, etc.) than a 5870 due to the extra VRAM? How would this compare to a 6870 2gb? Or is the desktop environment going to see a better performance gain from the 5870 since it's the most powerful GPU (though only 1gb of ram). Are there Nvidia options I'm overlooking (again, no flashing, compatible with standard OS install, no custom drivers required, CUDA driver addon acceptable since it's not required for the base system config).

Focusing just on the stock options of dual 5770 or single 5870:
5870 is obviously higher performance for a single screen, and works fine in OS X and Bootcamp, however with 3 screens would I be overall better off with dual 5770's? run the 2 side screens on one card, and the main screen on another providing more vram for each screen. In theory I could crossfire the 5770's for bootcamp (os x doesn't use crossfire, but my understanding is it just ignores it if you install a bridge...) which is similar (a little lower) than a 5870 in performance... if I'm right in these assumptions then dual 5770 seems to give the following advantages
Improved OS X system performance since each screen has more vram to work with
Improved OS X gaming again because the main screen has it's own vram
Improved Bootcamp gaming due to crossfire (single screen in windows)
Cheaper
Still standard apple config
Disadvantages
Much lower single screen performance vs 5870 in mac OS
Lower single screen performance vs 5870 in bootcamp (not as much lower due to crossfire though)
Still not as good a price/performance ratio vs. breaking from a stock config
What about newer ATI cards? Can't find anything confirming or denying that the 7xxx series is supported in Mountain Lion... if it is supported presumably it would be more stable than Nvidia since it would be using the same base drivers as the standard ATI cards which apple supports...

No option for "Airplay" in "Display setting on MacBook Pro; Where else is this option?

Trying to mirror MacBook Pro to Apply TV. Under "Display" settings there is no option for "Airplay". Even after a software update, such option was not visible. Where else can I find an Airplay option on my Mac OS X version 10.7.5.
- I set up Apply TV with my iPhone and I had no problems
- I already turned on "Airplay" settings on Apple TV
- However I am unable to find the "Airplay" option on my MacBook Pro
     - I opened up my "System Preferences"
     - Clicked on "Display"
          * On and Off "Airplay" option is nowhere to be found.

Hey JenLeb16,
I am not sure what version of MacBook Pro you are running, but as long as you have a MacBook Pro that is an early 2011 as well as running OS X Mountain Lion (10.8) then you should be able to do that. Take a look at the article below for more information.
About AirPlay Mirroring in OS X
http://support.apple.com/en-us/HT201343
Take care,
-Norm G.

Best option for photos to display on Apple tv

Hey guys, we have an Apple TV hooked up via HDMI to a plasma Tv. I'd like to display some photos on the TV that I'm planning to take on the near future. I currently have a 7 megapixel digital canon camera. (A compact powershot model). Would I see any benefit in using a camera with a higher megapixel count? I'm not really sure as to what resolution would be best. Does a 7 megapixel camera max out the capabilities of the TV, or would I be able to get better pictures to display using a better cmera?
Thanks in advance for any help you can offer.

If the photos you take are exclusively for viewing on your widescreen TV (or on your widescreen computer screen), rather than in printed form, it may be worth considering setting your camera to take in 16:9 format.
This way, your photos fill the screen. One thing to be wary of though, is if you then take photos in Portrait (using 16:9) they are even worse than if you had used 3:2 - ie they are even taller and skinnier on the screen.
I've seen the odd post here that some people take in 3:2, then duplicate their shots, and crop the duplicate with a 16:9 constrain for use with ATV on the widescreen.
Regards,

How can I set Firefox to print to PDF, the only otions I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

A couple of weeks ago, from the file menu, in my print options was to print a web page to PDF, that facility is no longer there. does anyone know how can I set Firefox to print to PDF.
The only options I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

Firefox generally displays the printers in Windows' Printers folder (Start orb > Devices and Printers). If it is missing one of the printers listed there, could you indicate which one it is, for example, Adobe Distiller, PrimoPDF, CutePDF Writer, etc.?
If you previously had an add-on which added print-to-PDF functionality just to Firefox, perhaps it got disabled. You could check here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions
Also, are you really running Firefox 8.0.1? That version from last November is no longer secure and has been superseded by Firefox 11. If you browse the web widely, you should update for your security.

Is there a key on the MacBook Pro to toggle display options for a projector

I have had some difficulty getting my InFocus projector to consistently work correctly with my MacBook Pro. Is there a key on the MacBook Pro that toggles the options for projector display? There was one on my last MacBook and my previous PowerBook.
Thanks -
Dudley Warner

No, there is no longer a key to control external display modes (it's F7 on my 1st gen MBP, but the option was removed along with the embedded numeric keypad in the Early 2008 models). There's not a substitute keyboard shortcut (with the exception of installing a macro player like Keyboard Maestro). Your main option is System Preferences > Displays (as stated, ticking the box to show Displays in the menu bar provides a helpful shortcut).

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

Drop down option for an output field in an ALV display

hi,
how to provide a drop down option for a field in the output of an ALV Grid display........
Thanks in advance

Hi Deepthi,
Please refer this program BCALV_EDIT_07 and BCALV_EDIT_06.
This will help you in your program
Reward Points if Useful
Thanks
Vishwanath Purohit

What is the corresponding option for " Table Display" in BI 7 Query Design

Hi Experts,
In 3.x Query Designer we have an Option of " Table Display" to arrange the charesterstics in the Coloums .
Please let me know the corresponding option in BI 7 Query Designer.
Thanks
Bhanuprakash.

I think there is no Drill down Fesility in Report Designer. what is the option for a query with Drill down charecterstics.

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

Multi display options for MBP using USB - Diamond BVU195 vs Sewell Minideck

I have narrowed my search for a multidisplay option for my MBP down to 2 devices;
Diamond BVU195
http://www.diamondmm.com/BVU195.php
http://www.amazon.com/Diamond-BVU195-Display-Adapter-included/dp/B002GHBW4S
and
Sewell Mindeck
http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
Has anyone had a chance to check out both of these?
There is no easy comparison, any opinions? thanks!

The obvious drawback of USB video adapters like these is that they tie up USB ports you may need for other purposes. If you intend to connect one or more such adapters to a USB hub instead of directly to the computer, be sure to use a hub that has its own AC power supply, and check with the adapter's manufacturer to make sure it has been tested with hubs and found to work that way.
The less obvious disadvantage of USB video adapters is slowness. If you don't use your multiple displays for gaming or other high-speed, demanding video applications, you may not be disappointed. If you do, you probably will be.

T510 missing options for display resolution

I am looking to order a T510. Lenovo site does not show options for display resolutions any more. I need WUXGA, how do I verify this before placing an order?

Hi vijpersonal,
There is no T510 with WUXGA. WUXGA is 1920x1200, but the new Thinkpads got FHD which is 1920x1080. As far as i understand it's hard to get a T510 with FHD at the moment. Seems like Lenovo have some delivery problems for models with the FHD panel. If you search for FHD in this forum you can find a lot of discussions about that topic. I'm sure the FHD will be available soon, but don't know when that might happen. You can also get the W510 with the FHD panel and those should be possible to buy now.
You can find the Thinkpad Notebooks pdf using this link: http://www.lenovo.com/psref/
Then you can find detailed spec for a lot of Thinkpads. I don't think you will find any T510 with FHD at the moment though.
Also i'm not sure where you are looking since i just checked shop.lenovo.com and for each of the models the resolution are specified.
-gan

Selection options for field display text instead of key

Hi All,
In the selection screen in my reports, when the user clicks on the selection options for one the fields to display the possible values they can use. Instead of the key the pop up box only displays the text for that field. This is an issue because one of the fields is equipment number and the user needs to be able to see the key not the descriptions. This is occurring in multiple reports and for multiple fields. I haven't been able to find anything in the infoobject properties or the query properties to change this.
Please help!
Edited by: Anthony Loh on Sep 29, 2010 10:57 PM

Hi Anthony,
Cud u pls check in backend how it is created ...
RSA1>Mdeling>IO Properties>Second tab BEx properties>Display-->it shud be Key and not text...
Check this and come back ..
Rgds
SVU123

No arrange option for Displays

I am using Keynote for presentations and want the presentation option on my laptop. When I have the laptop connected to the projector and go to OS X Display Preferences there is not an option to arrange the displays.
How do I disable the mirroring function?
Dennis

Dennis,
You have to do this via system preferences. Click on the Apple in the upper left corner of your screen. Select System Preferences. Then select Displays. If you have more than one display connected, you will have the option of clicking on a Mirror checkbox. If it is checked, you'll see the same thing on both laptops. If you uncheck it, you can display your notes, current slide, upcoming slide, etc. on your laptop, and your slides on the other screen.
I hope this helps.
Mike

Option for 4:3 Display, on W Series?

Similar Messages

Maybe you are looking for