Option for deleting non-necessary files

When I began developing my first RoboHelp project, I added
some HTML and PDF files which I don't need anymore. I would like to
know if there is an option within RoboHelp 7 which could
automatically find these files and allow me to delete them.
Thank you for your help.
Bob.

Arrgh! It's the words "automatically" and
"delete" in the same sentence that scares me.
I doubt this is what you mean though. If you run the
Unused File report it will list all the files that are in the
directory but which are no longer needed by the project. You have
to do the deleting though within the Windows directory.

Similar Messages

  • Best setup for a non-Mac file server?

    I have a dual xeon server, with a SATA RAID5 I want to use as a file server in a cross-platform environment.
    *What I've tried and the issues...*
    At first I considered using Windows 2003 (Win2k3) but Services for Macintosh (SFM) is an older version of AFP and thus only supports 31 character filenames. With all our Macs supporting SMB/Samba/CIFS and Apple touting that "Macs and PCs can co-exist harmoniously on the same network" I figured I would give that a try.
    SMB doesn't work.
    Sure I can create a connection, but transferring files is a completely different story. I'm trying to backup application and system data, but companies such as Adobe and Apple have named some of their files with special characters that can't be transferred over SMB. I know NTFS doesn't support these characters, but I though a Linux box using SMB would work fine. It doesn't. It's the protocol which keeps me from transferring the data. I end up with the lovely error message of "You cannot copy some of these items to the destination because their names are too long or contain invalid characters for the destination..." (what's sad is, if you google for " because their names are too long or contain invalid characters for the destination" you only get 6 results.)
    So I thought I would give NFS a try. Apple says "Viewed from Mac OS X, [connecting via NFS] is just like connecting to an Apple or Windows server." No. It's not. NFS shares don't even show up in the Finder's Network listing. There are also a pile of other hurdles which are only tackled by savvy, command-line using users.
    So that leaves me with AFP. Win2k3 doesn't support filenames longer than 31 characters, and Win2k8 is dropping SFM altogether. Off to choose a *nix flavor, but that requires Netatalk. It hasn't been updated in years, it has many bad performance reviews... and most distros have removed it. I can download and install it. Oh, but that requires I get the kernel source files. Then I have to create an RPM an that's not working... now I'm several levels deep in trying to figure out how to get Netatalk working and I'm not even sure it will work.
    *What's the best setup for a non-Mac file server?*
    FreeNAS seems promising, but it's in alpha/beta and they have all sorts of warnings regarding potential data loss. Sure there's ExtremeZ-IP, but I really don't want to spend $675 do something Apple claims OS X can already do. I can put just about any non-Mac OS on this thing... what's the best way to set it up so it works?
    Thanks much.

    Rick may be right because although i didnt think of it before i tend to have notoriuosly long classnames for my php classes and i have used samba on occasion (when rsync is out of the question for one reason or another) and never had a problem. I use kubuntu (feisty at the moment )with an ext3 filesystem. if i have a chance this evening ill give it a try and see what happens.
    You could also possibly use FUSE to use an ssh filesystem for the shares... i don tknow how that would figure in your back up though.
    Also if worse comes to worse you could tar or dmg the the necessary files... just some thoughts.
    Ill be interested to know what you end up implementing....
    OH one last thought... Compile Darwin from source and use that as your server

  • How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    my problem solve by me
    first create apple id
    fill credit card details
    and complete your account creating  process.
    than go to app store or itune store
    login your acount
    click right side  - account button
    than again login for account setting
    next go to payment information and click edit button
    when u enter payment infomation
    click none button in payment method and click done button.
    than ur credit card has been removed.
    but rs. 60 will deducted in your account when u doing this process.

  • Add option for lossless uncompressed RAW files for A7r

    I'd like to see the option for lossless, uncompressed RAW files for those of us who want it vs. the current situation of only having the option of lossy compressed RAW files (which in some instances, can exhibit posterization). I think this is a logical option for a camera of the A7r's calibre. If this option can be incorporated via firmware update, all the better. If it's a hardware issue, hopefully this is addressed in the next iteration of the camera.

    Honestly, this is pretty deceitful marketting on both the Sony A7 and A7R literature. both promote the use of 14 bit RAW encoding as a feature of the two sony cameras, however, they are really 11 bit + 7 bit compressed lossly RAW formats, delivering no where close to the same tonality of 14 bit true RAW. in no sony literature that i could find, is it mentioned that it's lossly. this is accurate?  Not even close.  14-bit RAW output for rich tonal gradation 14-bit RAW image data of extremely high quality is outputted by the a7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony's Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer.  I was going to purchase two A7R bodies and move my canon gear over to Sony ..until really all this came out.  I'm hoping as well as the OP that a firmware upgrade comes out.

  • HT2534 While creating an account from my iPad there is no option for selecting none in the payment options. It states I have to give my credit card details. What's the procedure to open a free account?

    While creating an account from my iPad there is no option for selecting none in the payment options. It states I have to give my credit card details. What's the procedure to open a free account?

    It's in the article.  You must first sign-out your current account, then go to App store to purchase a Free App.  It will ask you to either Sign in or create a new AppleID.  That's when you start creating a new AppleaID and NONE will be available as a payment option.

  • Is there a way to check if I have either deleted a necessary file or...

    Firstly, let me apologize for this rather long post. I just want to make sure I give as much detail in order to get the problem really solved...
    I have a MacBook Pro 2GHz Intel Core Duo with 512 MB of ram. I am running OS 10.4.10 and don't have the means to either upgrade the OS, increase ram or even backup and reinstall (I am in a remote part of the South Pac. Islands, working as a relief worker, without much more than a dish to connect to the net).
    Now while I know that QuickTime has nothing to do with WMA files and that Flip4mac is the solution of record, allow me to pose my problem (because I can't get a straight answer on other forums whose only suggestion is to reinstall their software).
    I have been using Flip4Mac QuickTime components successfully (to save radio streams) for over a year without a single problem with various versions of Quicktime. Presently, i use QuickTime version 7.6.0 and all was working fine until a few weeks ago. QuickTime works fine in every other way with the exception of playing my saved streams that contain WMA audio.
    I believe I might have created the problem by either... ignorantly deleting files with a tool that allows me to examine the hard drive (including system files) in order to delete large ""unnecessary"" files... or even possibly, it occurred when questionable-content was auto-opened via QuickTime (which incidentally had caused the system to crash requiring a hard keyboard shutdown and restart). The problem occurred soon thereafter.
    i have un-installed and re-installed QuickTime, Flip4Mac and even Windows Media Player for Mac several times with no change. i also ran several virus / disk scans (VirusBarrier, ClamXAV, MacScan, as well as TechTool, Mac HelpMate and MainMenu) also with no change.
    The dialog box that pops up when I attempt to open ANY past saved QuickTime files basically says, QuickTime Player is 'missing a component.' This window doesn't always popup. Also the player will advance the minutes and seconds without playing a sound. Further any app that relies on WMA files also crashes, quits or just doesn't work. Such as WMA to MP3 converters. I even have problems with sounds / music from a couple of MacGames that I own (Luxor & Hidden Relics) as these games may rely on WMA to function (this may or may not be related).
    My question is... is there a way to check if I have deleted a necessary codec, system file, pref. file, receipt, etc. that is crucial to using WMA?
    Or even is there a way to check if some erroneous file has been added to my system (such as a DRM plugin) that is preventing the playing of my saved streams?
    Once again, as I mentioned above, I am unable to backup and reinstall OSX and am at the end of my rope. The only thing that is left for me to say is.... Heeeellllppp!
    Message was edited by: C. Angel

    Tap on the URL to get to edit mode.
    Then slide your finger over the URL to the right until you see the http or https part.
    Or copy the URL and paste it into free Notes page.
    For https URLs there is a padlock in the status bar above the URL.
    If you believe that this sounds complicated, then I agree.
    Perhaps someone will chime in with an easier solution...

  • What are options for applying non-inventory costs to production orders?

    We have a non-inventory costs that need to be assigned to product produced on production orders.  There are two processes -make-to-order and make-to-stock.
    Currently we use activity rates to apply labor and burden costs to our production.  We use separate cost centers where needed to ensure that we have sufficient granularity to our activity rates applied.
    We have a few specific issues where we need to understand the options for applying costs -
    1) We have freight and duty costs related to inbound raw material that we want to assign to our final product.  The amount assigned may be either a specific amount (or a specific amount per model), or a % of the total cost on that production order.
    2) We have material on the production order bill of material that is called out by quantity and we are using discrete backflush, however we have found there are issues with the accuracy of the quantities.  We want to have this product ordered using KANBAN (bin ordering) and have the value relieved from inventory when the bin is issued to production.  The cost on the production order is envisioned to be an average amount for the product - or an average amount by model.
    3) We want to have a portion of cost for production scrap included in the cost of each product produced. (similar to freight and duty).
    In all cases- the amount can change depending on analysis from accounting regarding freight and duty costs (these fluctuate depending on the cost savings we achieve with combined loads and depending on the amount of out of country sourcing), the scrap amount may change periodically depending on the initiatives to reduce scrap on the production floor, etc.
    We currently use three activity types, labor, burden and tooling.  It is my understanding that there is a limitation in SAP that keeps us limited to 6 activity types.
    My questions are:
    Are we limited on activity types? these are an option to apply additional costs, but may not be the best option if we want to change the amount applied based on model or apply as a percentage.
    Are there other options for applying costs that we can explore? I want to be sure we take into account the various options available before we start down a specific path.
    Thank you in advance for your assistance.

    As clarification- we are using standard costing for our raw material.  We currently accumulate the incoming freight in a balance sheet account.  This is treated as part of our inventory.  We have considered using an activity type with a activity added to the BOM to apply the cost to the production order.  Then we could use the secondarly cost element data to book an entry to relieve the freight account on the balance sheet.
    Because we use standard costing- access to see production order variance is critical and must be maintained in any process we select. We also use COPA reporting- so the costing information must be able to flow to COPA for the specific orders/products/serial numbers.
    We are doing make to order (production order / sales order specific combination) but also looking at a make to stock process - so the method to apply costs must take both of these configurations into consideration.
    Rajneesh - you mentioned that I am limited to 6 activities in a work center- but does that mean I can have more than 6 activity types in SAP but only 6 activities in a work center/cost center combination?
    Thank you.

  • Profile Option for deleting a person

    Hi
    I am looking for the name f profile option, which shout be set up to enale suer to delete personal record.
    The menu is under Super HRMS Manager: total comp distribution Delete Personal Record
    Thx

    Pl post details of your OS, EBS and HR RUP versions. AFAIK, there is no profile option for this. See MOS Doc 143707.1 (How to Delete an Employee's Personal Record?)
    HTH
    Srini

  • Option for deleting mail from the server?

    hi,
    is there an option in mail that would enable me to delete messages from my server when i delete them from my mail client but keeps the messages i did not delete on my server?
    i know there is an option to delete messages after they've been downloaded, but that's not what i want.
    thanks!
    carys

    Hi,
    I would like for this very thing to happen ...moving mail from my inbox deletes it from the server. However, I've checked that option in the prefs, but it doesn't work.
    I can delete mail [from server] when retrieving it "right away", and I can "remove now", but the "when moved from inbox" options does nothing.
    Any suggestions on how to get this to work?
    PS: I've heard about the cool features of Mail 2.0, but keep in mind that I'm using Panther (w/Mail 1.3.11)
    iBook G4 1.33 w/Mac OS X (10.3.9) w/768 MB    

  • Best option for Backup of HDV Files

    I'm just finishing a project and will be needing my harddrive space for the next one, and I'm wondering how best to store HDV footage NOT ON MY HARDDRIVE? (Not that I don't trust them, just don't like having all my eggs in one basket).
    There's not a good intuitive answer that I've found but I'm leaning on taking my 720p24p footage and going MPEG-2... and burning to Data DVD's and storing them away. However I am concerned if there is a significant loss of quality between it's current format (DVCPro 100) and the MPEG-2.
    If I need to retrieve the footage for later edits am I going to have issues?
    Any help or ideas would be appreciated. I have a combination of P2 and Onlocation captured files, and I'd like to cut out all the "Crap" and save just the takes needed...and have a back-up OFF of the hardddrive just in case.
    Thanks in advance.
    H.R. Crystal

    We were on a really tight time schedule, and so the P2- workflow got in our way. about 18% of our film landed on P-2, (Just exteriors where we didn't have power) Everything else was done via on-location.
    We didn't run TAPE -- Format is onlocation's version of .avi which as best I can figure is DVCPro 100. I don't have access to the camera it was recorded on...and even I did, would this be the best option? (Tape export?)
    Thanks.
    H.R. Crystal

  • Delete all option for deleted programmes

    Hi,  Does anybody know if there's a way to "delete all" from the deleted programme's menu?It would be far easier than having to delete every programme individually from the last 18 months (2tb box)Thanks

    Hi, Just came across your post here, I've only just encountered the very same thing. Seemed a good idea at first to have a backup of deleted programs, but yes, you are so right, trying to free up space or, as in my case, following the recommendation from Sky to permanently remove all deleted content in an effort to rectify a glitchy planner, yeah right! This will take an age!The only current way around this, and it is only to be used as a last measure, is to perform a complete system re-set! But remember, doing so will delete EVERYTHING and basically you end up with the box as it was from new! Then you simply start again with setting your reminders and favourites etc.  If anyone goes down this route, just try and get in the habit of EVERYTIME you delete something, go straight into the deleted tab on your box and permanently delete it from there, now you will never end up with such a list to have to delete individually again!I know that this is an extreme measure to take to accomplish what should be much quicker, but until Sky release an update to the Sky options that would enable a multi delete option, this is about as good as it gets, otherwise be prepared for a very long spell of sitting there button pushing. All the best.

  • Illy CS6: 'unembed' option for images non existent?

    Hello all,
    Just wanted to ask a quick question about this much-hyped 'unembed' image option in Illy CS6.
    I'm working on a PDF with like 40 or so JPEGs scattered about. Naturally I never embed images when I'm working on stuff like this in Illy - reduce file size, no need for it, makes everything way less clunky. However, I had to change comps so rather than cart around a folder full of linked pics I thought I'd just do a mass embed using the Links window. So far so good.
    However, now I'm trying to save it as an (not-intended-to-be-edited) PDF. Before I was getting super clean outputs at like 5meg or so (well, actually they came out at 25meg but I ran them through Acrobat to reduce the file size... anyway). After embedding, they came out at like 60meg or whatever. OK, no big deal, classic problems with saving PDFs.
    However, I _can't_ find a way to unembed the images, at all. I'd consider myself a really advanced user of Illy, but it's totally eluding me! I've watched videos of people who are doing the exact same thing - either getting to it through Links or the top tool bar - however in my case, I have a ghosted out 'embed', and that's it. Can't find 'unembed' anywhere... I'm just wondering, is this a feature that didn't make it to CS6 (rather just CC), and it was some sort of typo that means the PR release went out as it being for CS6?
    NB: FYI, I of course just made like 6 images of each of the pages, then stuck them together to make a PDF which is like 3meg... all is fine, but I think from a purist's point of view one is better to save 'real' PDFs rather than images...
    thanks for any help!
    Marko

    You need to have the Creative Cloud version of Illustrator CS6
    In case the file is saved with PDF compatibility option turned on, you could open it in Photoshop and extract the images there

  • Is there an option for 'multi-selection' of files?

    It is very troublesome having to tap each and every file for selection.

    Thanks for the reply!
    That's what I am currently doing. However, if there is a 'select-all' option it would be much easier.

  • Where did the option for Delete or Archive go?

    I have iPhone4, iOS 4.0.2
    For my Gmail Exchange Push account, the on/off switch for "Archive Messages" is gone. This is what the switch looks like:
    http://www.gilsmethod.com/wp-content/uploads/2010/06/deletegmailmessagesinios44. png
    I have already deleted and re-added my Gmail Exchange account, and power cycled my phone. Nothing worked.

    With Gmail Exchange Push and the latest OS?
    The Archive option appears with SMTP for me, but I want Exchange Push.

  • IPhone 5 7.1.2 no option for deleted folder on server

    I have my iPhone 5 and iPad Air identically set up for Mail options but for some reason there is no option on the iPhone for checking "Deleted Messages" under "Deleted Mailbox" option to be the folder on the server.  This option is check and exists on the iPad.
    Any ideas why it is not even available on an iPhone?  Why would it be different?  Right now on the iPhone it only allows the Deleted Message Folder "On the iPhone."
    Thanks in advance.

    SMTP server settings are for outgoing mail, and have no effect on received mail.  You should set up iCloud accounts using the built in iOS template.

Maybe you are looking for