Option for IPTC "Date Created" field to be auto-populated?

Hi,
The date of capture is held within the "Date Time Original" field in the EXIF data; but the IPTC "Date Created" field is blank.
Currently i have to fill this in manually if i want it populated (which i have to do for a certain customer, for hundreds of differently dated images) but i would really like a "replicate" button by which i can auto-populate this field; or someother easy workaround that i might be missing here?!?
thanks,

Hmm, both LR 3.6 and LR 4.0 normally set IPTC:DateCreated to be the same as EXIF:DateTimeOriginal, both on export and when you do Metadata > Save To File.
Perhaps you could post a culprit image here (use the camera icon) to see what might be going on with you.

Similar Messages

IPTC Date Created format

When importing images into Lightroom v1.1 The IPTC Date Created field appears to take it's value from the EXIF field Date Original, so far so good, but it copies it in the following format yyyy-mm-ddThr-min-sec+10.00. Is there a way of just getting the "date" part into the IPTC date created field?
Regards Willem

Hi Matteo
This is what I noticed in LR there 4 date fields 3 EXIF
Date Time Original 13/08/2007 12:20:07
Date Time Digitized 13/08/2007 12:20:07
Date Time 13/08/2007 12:20:07
and one in the IPTC section called "Date Created"
the behaviour I see in LR is as follows
If when "importing images" I apply the Metadata preset "None", or a preset that leaves the "Date Created" field in the IPTC Image section unchecked, the IPTC Date Created field shows the following value
Date Created 2007-08-13T12:20:07Z
if I tick the box next to the Date Created field in the IPTC Image section in the Metadata presets and leave the field itself empty, the Date Created field in imported image is blank.
I can off course enter a date only at this stage and have that date show in LR, but I often import image in a batch that have been shot on different days.
What I would like to be able to do is to have just the date part end up in the IPTC date field eg. 2007-08-13 without the T12:20:07Z
Thanks Willem

IPTC Date Created only imports for October

I'm creating JPEGS with only IPTC and EXIF data in and the field 2:55 Date Created only seems to appear in the File Info / Origin / Date Created in CS4 if the date is set to october??
Manually editing the jpeg file, for example 20081007 works but 20080907 fails, even if I change the remaining EXIF and IPTC date fields to match
I dont suppose anyone has any ideas as this is driving me nuts!
Thanks
Derek

No, that changes the Date on the EXIF panel, in my case the date the scans were made. I want that date to stand and the IPTC Date Created date changed.
Probably doesn't matter anyway, since I have just discovered that changes I make in Aperture IPTC metadata cannot be written to the master copy. At least not for TIFF files. Strangely, it does seem to work for jpgs.
Too bad. I liked some Aperture features.

How do I insert a 'date created' field into a template?

I know that you can insert date & time fields into templates and make them auto-update whenever I open the document, but I am wondering if I can make the date field be set to the date when I created the document and then stay that date even if I reopen the file?
In other words, is there a "Date Created" field?
Thanks in advance for any help given.
I am using Pages '09.

I believe the date will either update always or never, depending on how you set it's options. I don't believe you will find an option for Update Once and Never Again.
You will have to update the date upon creation and then set the option to not update. You can always find the creation date in the Document Inspector, Info tab, Show File info. You can also read this information in the Finder.
Jerry

No information in the 'Date Created' field in Finder

Hi
I am on 10.4.11 OS and I am having a problem with Finder and the Date Created field. When I view my photos in files the 'date creation' field is missing. It is just blank. The 'Date Modified' field appears.
This has become a large problem for me since another application I use will import only photos with a Date Creation Field...and will not import unless there is one.
Anyone have any experience with this? How to fix it? Or how to at least enter a date in the fields?
thanks in advance
Tammy

Make sure "Date Created" is check in your Finder View preference.
Try trashing your Finder preferences and reboot.
HD > User > Library > Preferences > com.apple.finder.plist
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Delta Option for Generic Data Source

Hi ,
My requirement is Delta Option for Generic Data Source. This Data Source is getting Extracted from Function Module.
For this requirement I have followed below steps.
1) Added the Field (On which Delta gets enabled) to the extract structure by using Append Structure
2) Enabled Delta On this Filed.
3) If I try to save the Data Source, I have gone to a screen where I am able to see 4 coloumns
a) Selection
b) Hide Field
c) Inversion
d) Filed Only known in User Exit.
By default Hide Field and Filed Only known in User Exit check boxes have been checked.
Would you please tell what is the use of Filled Only known in User Exit check biox.
As My data source is getting the data buy using the Function Module, Shall I uncheck this Check Box.
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
The "FIELD" should be checked if we write any enhancement in CMOD, so that system can identify that this particular field has enhancement written to it,
But even in real time systems i usually find that even though we check the "FIELD" or not , there is no effect .
So Checking "FIELD" or not will not impose any isses .
Regards,
Krishna

How can I set a date range for a Date/Time Field in LiveCycle ES2?

I need to set a specific date range for a form set up in LiveCycle ES2. Cannot see where i allows me to do that without a code entered.

Hi,
You can't set a start and end date for the date/time field, the best you can do is validate the range after the user has selected it.
An alternate is to make your own date / time field, like this sample http://adobelivecycledesignercookbookbybr001.blogspot.com.au/2013/05/an-alternative-date-p icker-for.html
Regards
Bruce

TS3899 i receiving my gmails with 15+ minutes delay. this is because no option for "push" data, only "fetch" for gmail account. How can fix that?

I receiving my gmails with 15+ minutes delay. this is because no option for "push" data, only "fetch" for gmail account. How can fix that?

Sign up for Google's paid Apps for Business service, you can then set things up using Exchange & you'll get push using Gmail. Otherwise, you can't get push using Gmail.

Select option for a character type field

Hi all as per my requirement i have a selection for a data type char40
Hence in my wddoinit method i used the following code to generate the select options in WD
create a range table that consists of this new data element
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'CHAR40' ).
add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD( I_ID = 'CHAR40'
IT_RESULT = LT_RANGE_TABLE I_READ_ONLY = READ_ONLY I_NO_INTERVALS = 'X').
The select option is properly displayed but "char" word is infront of the selection fields.
I want to remove this char word.
Can someone please advice me on this ?

Hi
Modify the Add_selection_field call to add descrption for the field.
if you dont want anything pass space.
* add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
I_ID = 'CHAR40'
IT_RESULT = LT_RANGE_TABLE
I_READ_ONLY = READ_ONLY
I_NO_INTERVALS = 'X'
I_DESCRIPTION = ' ' " whatever you pass here will come as a label to the field or we can say
" inplace of CHAR
thanks
sarbjeet singh

GRR2- 4FM-RepPaint(put ABAP code for convert data in field)

Hi,
If somebody know how possible add ABAP code for convert data in some column-field of report (by RepWriter,UserExit,BADI)?
Thanks a lot.

Elaborate your question. Not clear ??

What are my options for a data plan + upgrade?

So my old phone (Samsung Intensity) broke today, and I'm looking to upgrade to a smartphone. I would prefer an iPhone, but really it's not that big of a deal if I get a Droid. I'm eligible for an upgrade currently. What are my options for a smartphone and a data plan? I'm looking for what's the cheapest option as far as this goes. People tell me an iPhone is free with an upgrade, and that the cost is $20 a month, but I just want to be sure.

Unless you have an old calling plan, you should be able to add a tiered data plan for your new smartphone (i.e., $30 for 2 GB). If you switched to the Share Everything plan, your monthly cost would be $40 line access + at least $50 for 1 GB data (includes unlimited minutes/texts and mobile hotspot, although the hotspot data usage comes out of your data plan), plus, of course, taxes/fees (and insurance, if applicable).
You can check pricing for phones via your on-line MyVerizon account if you click on the Upgrade button. If you are mainly interested in free phones (keep in mind that there's a $30 upgrade fee), there's the Nokia Lumia 822, Spectrum 2, Droid Razr M, iPhone 4, Galaxy Stellar, Marauder, Rhyme, and the Lucid. Several of those are 3G phones.

Is Multimaster Timesten replication a good option for huge data volumes?

Hi,
There are 3 timesten nodes in our production setup .There will be around 5 million rows in each node initially which will gradually increase to about 10 million.Once our application moves to production, there will be around 50-70 transactions per second in each node , which need to be replicated on to the other node.
Initially we thought of going with Active-Standby-Subscriber replication.However in this case if active and standby node go down,then it will be a site failure case.So is Active-Active (Multimaster replication) configuration a good option ? Will data collision happen when replication happens in both directions?
Thanks in advance.
Nithya

Multi-master replication is rarely a good idea. You will get data collisions unless you rigorously partition the workload. Conflict detection and resolution is not adequate to guarantee consistency over time. Recovery back to a consistent state after a failure is complex and error prone. I'd strongly advise against a multi-master setup, especially for a high volume system.
You seem to be concerned that 2 out of the 3 systems may fail resulting in a site outage. The likelihood of that is small if you have set things up with separate power etc. With the A/S pair based approach you would still have query capability if the two master systems failed. The chances of all 3 systems failing is not that much less than of just 2 failing in reality I would say (depending on the reason for the failure).
Chris

Options for auditing data changes

Hi Friends,
I thought I will get some inputs on my following implementation. The requirement is to audit some data changes with in the system.( Oracle 10.2 on RHEL 4.7 )
The audit is required in a sense that, the before images of data and information of who changed the data is required. I have looked at options like Oracle Auditing,FGA and so. But this cannot give me audit for the data changes,when and who changed.
The first thing that comes into my mind are using triggers . Another option is using log miner. I have successfully tested it out with both of these approaches. The environment is like
1 ) For some critical tables for which audit is required triggers were written ( ours is an OLTP application )
2 ) For some non critical tables, log miner which was called by a stored procedure which runs at certain periods is used.
3 ) audit data is stored in a different schema , with same table names as in base schema.
I would like to know your thoughts on this.
Thank You,
SSN

The delay with log miner is acceptable with some less critical audit tables and as you said, tirggers can be implemented for some critical tables.
One bottleneck with using logminer is that it depends on the availability of archived redo logs, the backup mechanism if any implemented should make sure that, no archive logs are removed from the locations specified for the audit program. The backup mechanism should ensure that all archived logs are processed by periodically running audit program which uses log miner.
Wondering if there is any other recommended approach for this.
Thanks
SSN

Showing time in the date created field

Documents created today just say 'today' - but I need to know the time as well, otherwise I have to open each file's 'get info' window.
Anyone know how to change the display settings?
Thanks

Click on the line to the right of Date Created and drag it to the right until the time appears.
(43087)

Options for read/write form field data with VBA/Reader

I have a project which requires reading and writing field data to a PDF form using VBA in PowerPoint. The code I have works properly with the full version of Acrobat, but the client this project is for will be using Reader. I'm looking for suggestions to what options I have to be able to access the form field data (I don't need any other features other than access to the field data). Ideally, I would love a solution which doesn't require the client to install anything extra for this to work, but I'm assuming that this isn't possible without an extra install.
Is there a library that exists in Reader (or could be licensed to be installed on the client's machine) that would allow the data to be read without needing the full version of Acrobat?
Does a plug-in exist for Reader, or could be written, that would allow this? Writing a plug-in would certainly be beyond my current capabilities, but I am interested in knowing every and any choices that are available.
Are there any other options to do what I need to do?
I had originally thought about exporting the form data and parsing it in the VBA program, but this would take a bit more work to write the parsing routine instead of accessing the fields directly. Plus, it appears to me that Exporting is not enabled in Reader.
Thanks for any insight you may be able to provide.

Thanks for the response; this was my original suggestion, but I don't think this is feasable for our client. I suggested to our account people that this might be the only way to do this (and the easiest, although possibly the costliest since it would have to be purchased for their entire sales force) and they initially said that this would not be an option, so I wanted to be able to cover all the bases, and explore any other ways that they could do what they want. Is this the absolute only option to do this?
Someone also suggested to me that licensing the Acrobat PDF Library SDK might be a way to do this, or that it could possibly be done with a plug-in for Reader (although from what I have found, Reader plug-ins would have to be approved by Adobe). These options, if possible, are beyond my current knowledge but I do want to be able to give them a complete list of possibilities.
Thanks again.

Option for IPTC "Date Created" field to be auto-populated?

Similar Messages

Maybe you are looking for