Option Icon 452 is causing a critical failure. Suggestions?

Option Icon 452 is causing a critical failure as soon as I put it into the USB slot. It seems that loading the wrong drivers for it or thinking its something that its.
Each time I put the 452 into the USB slot I immediately get an error in which the screen takes on a shade of gray and a black box in 6 languages appears saying "You need to restart your computer. Hold down the power button until it turns off" - I cannot do anything besides that and if I leave the modem attached and restart the same error appears as soon as it boots up. Once I take it off I'm able to restart normally again. Not sure what that problem is but it seems rather critical.
I'm not having any other problems with my macbook and I have a friend who tested the Option iCon 452 on his macbook and had no problems. So I'm kinda muddled.
thanks for any suggestions.

Runaway org.postfix.master if you want to take a look at it. Linc.
Tried a old hack, no go.
https://discussions.apple.com/thread/3184945?tstart=0

Similar Messages

An account failed to log on unknown username or password. Causing Login audit failures

I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self. It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
non of them are using any special user accounts. I have used MS network monitor and can't find anything helpful to lead to the issue. All computers in the network are running Windows 7. The domain functional level is 2008 R2.
I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3. I have includes the events below. I need to figure what is causing the audit failures as my GFI Test Hacker alert is
catching it every morning. Disabling the Test Hacker alert is not a option. I have used Process Explorer also but can't seem to pin it down. I also enabled Kerberos logging.
http://support.microsoft.com/kb/262177?wa=wsignin1.0. All event codes state its a unknown or no existing account but how do I stop it from happening?
This is from the System Event log
A Kerberos Error Message was received:
on logon session TH.LOCAL\thsbs11e$
Client Time:
Server Time: 14:59:53.0000 3/4/2014 Z
Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
Extended Error:
Client Realm:
Client Name:
Server Realm: TH.LOCAL
Server Name: krbtgt/TH.LOCAL
Target Name: krbtgt/[email protected]
Error Text:
File: e
Line: 9fe
Error Data is in record data.
This is from the Security Event log
A Kerberos authentication ticket (TGT) was requested.
Account Information:
Account Name: S-1-5-21-687067891-4024245798-968362083-1000
Supplied Realm Name: TH.LOCAL
User ID: NULL SID
Service Information:
Service Name: krbtgt/TH.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: 0xffffffff
Pre-Authentication Type: -
Certificate Information:
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:
Certificate information is only provided if a certificate was used for pre-authentication.
Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
I then get teh following error in the next event
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: THSBS11E$
Account Domain: TH
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x25c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: THSBS11E
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

Well I opened the case for him and he never followed up with Microsoft :-(
It's a kerberos issue, we're told to ignore it. Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better? I can tell you it's normal with Essentials but not the exact technical reason it's
happening.
Unfortunately TechNet isn't coming back, sorry folks :-(

Help needed: view option icons missing

Hi,
There are only blank space in the bar location where my view option icons and spotlighter use to be.
But I can still click the old position and the same functions still working.It is so inconvenient
because I need to guess the choice.
Does anyone have some ideas about how to fix it?
Thanks,

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Options icon

i noticed i was being charged 17p for sms delivery receipt so i have tried to turn this off on my blackberry curve. i was told to go onto the options icon and click on sms text but when i go onto the options icon nothing to do with sms comes up! how do i turn this function off please.
Solved!
Go to Solution.

You're not very specific so I'm just gonna guess. I don't know why the heck they'll charge you for that.
I think you are talking about SMS Delivery Reports (again, Im just guessing you are not giving me much to work with), then go to the Text Messages App> press menu and choose Options> Under SMS uncheck Delivery Report.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Send AT commands to Option iCON 322 3G Modem

I have an Option iCON 322 3G Cellular Modem and would like to check out the AT commands with it, but so far I haven't been able to get terminal to connect to the device. A guide says to use |ls -l /dev/tty*| to find my device locations, and here's what it shows for the modem:
crw-rw-rw- 1 root wheel 11, 8 Aug 15 20:51 /dev/tty.Icon322 App
crw-rw-rw- 1 root wheel 11, 6 Aug 15 20:51 /dev/tty.Icon322 Control
crw-rw-rw- 1 root wheel 11, 10 Aug 15 20:51 /dev/tty.Icon322 Diag
crw-rw-rw- 1 root wheel 11, 12 Aug 15 20:51 /dev/tty.Icon322 Modem
So I tried |screen /dev/tty.Icon322| but it just says "Cannot exec '/dev/tty.Icon322': No such file or directory."
Can anybody help?
Message was edited by: Varlos

I finally figured it out, I had to do screen /dev/tty.Icon322 Control to get it to work.

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
a. User trying to create delivery but stock not available.
b. When stock is not there it should show an error message in SAP screen but its not - like stock not available etc
c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
d. But issue its creating even its less than zero
Is there anyone who can help me out...

When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
Any suggestions !!!

Invisible select option Icon

Hi all,
I am working on HR ABAP reports. I want to hide a select option icon which uses no intervals and appears as a parameters but actually a select option.
suggest how to do this.
thanks
Sanket

Hi Sanket,
IF u want to display as select option for which u can enter single range or single value do like this.
SELEC-OPTIONS: so_matnr FOR mara-matnr NO-EXTENSION.
IF u want to display as select option for which u can enter only single values(Range is not possible) do like this.
SELEC-OPTIONS: so_matnr FOR mara-matnr NO INTERVALS.
If u want ur select option to be acted as parameter do like this.
SELEC-OPTIONS: so_matnr FOR mara-matnr NO INTERVALS NO-EXTENSION.
If not these cases then explain ur requirement clearly.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jun 21, 2008 5:00 PM

Error messages in 2651XM GW, cause outbound call failure, reboot fix it

Cisco 2651XM as Gateway, it keep posting these error message and after a period of time, it cause outbound call failure.
Reboot fix it but there're still error messages...
How to fix it? It's IOS bug or hardware issue? How to identify?
Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 03-Aug-05 20:45 by hqluong
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
cpchn1-g1 uptime is 6 hours, 56 minutes
System returned to ROM by reload at 03:52:44 NZST Tue Apr 17 2007
System restarted at 03:56:27 NZST Tue Apr 17 2007
System image file is "flash:c2600-ipvoice-mz.123-8.T10.bin"
Cisco 2651XM (MPC860P) processor (revision 0x100) with 118784K/12288K bytes of memory.
Processor board ID JAE072000AJ (1555074759)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
62 Serial interfaces
2 Channelized E1/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
See attach detail error messages

Cisco 2651XM as Gateway, it keep posting these error message and after a period of time, it cause outbound call failure.
Reboot fix it but there're still error messages...
How to fix it? It's IOS bug or hardware issue? How to identify?
Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 03-Aug-05 20:45 by hqluong
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
cpchn1-g1 uptime is 6 hours, 56 minutes
System returned to ROM by reload at 03:52:44 NZST Tue Apr 17 2007
System restarted at 03:56:27 NZST Tue Apr 17 2007
System image file is "flash:c2600-ipvoice-mz.123-8.T10.bin"
Cisco 2651XM (MPC860P) processor (revision 0x100) with 118784K/12288K bytes of memory.
Processor board ID JAE072000AJ (1555074759)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
62 Serial interfaces
2 Channelized E1/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
See attach detail error messages

Option icon

need help?...option icon does not appear on source list? Can't transter to ipod from itunes.

Did you get your answer? It doesn't look like it. Anyway, the option icon/button does not appear in the iTunes Source List -- it appears at the bottom of the iTunes screen, and only when a Shuffle is plugged-in and recognized by iTunes.
Roger

RV320 FW upgrade 1.1.1.06 = critical failure

Hello,
I have upgraded the router to your latest 1.1.1.06 firmware and after it reboots (which btw takes ages) it comes back with:
Critical failure. Please contact support.
Any idea on this? it is unusable now!?

Hi Walter
From your description, "Blinking green PWR LED and solid red DIAG LED is all I get", the device is still at boot loader phase. So you tried tftp method but doesn't work? Can you try again? you can use this tftp.exe (http://tftpd32.jounin.net/) to upload the firmware to 192.168.1.1. Below are some more details about the tftp upgrade.
1.power off
2.power on with pressing the reset button, wait for 10s, untill the diag LED turn red, and power LED keep flashing.
3.set lan pc to 192.168.1.100
4.use tftp client to put the firmware to device. Windows command for example: tftp -i 192.168.1.1 put RV32X_v1.1.1.06_20131206-code.bin. Or using other tftp client like "http://tftpd32.jounin.net/"
5.after tftp finish, the device will reboot by itself.
6.after startup, power led is on, diag led is off.

Cisco Secure Desktop access denied and critical failure errors

Hi
Please can you assist me with the following Cisco Secure Desktop error.
"Access Denied
Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
Critical failure.
Cisco Secure Desktop must run and validate your system to proceed. Please verify your browser settings and configuration and retry."
Under "Weblaunch" Platform detection, Sun Java and Java Detection are ticked. The other items are unticked.
Thank you in advance.

I'm having the same problem with Lion 10.8.4
I've tried three different browsers with similar results.
Firefox 22.0
Chrome Version 27.0.1453.116
Safari 6.05
Any ideas? I know we have the Secure desktop set to scan for antivirus for all connections. I know that my AV is on the list and supposedly compatible.

TS3367 Nowhere on my iPhone 4 can I activate FaceTime... I've tried using contacts, settings, and even when I call someone with an active FaceTime, the FaceTime icon is not lit up. Any suggestions?

Nowhere on my iPhone 4 can I activate FaceTime... I've tried using contacts, settings, and even when I call someone with an active FaceTime, the FaceTime icon is not lit up. Any suggestions?

There is no facetime icon and never was. Facetime is built into the phone. Go to settings>general>restrictions and make sure facetime is ON. Go to settings>facetime and turn it on there and set it up there. Also read http://support.apple.com/kb/ts4268

HT1694 My hotmail is showing that I have 32 new emails and I do not have any. Can't get the 32 off the mail icon on the home page. Any suggestions?

My hotmail is showing that I have 32 new emails and I do not have any. Can't get the 32 off the mail icon on the home page. Any suggestions?

I have tried that also, but its still doing the same thing

I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.

I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.

Hi ellafromva,
From your description, it sounds like you may have iTunes Match activated; you may find the following article helpful:
Apple Support: iTunes Match on iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5637
Regards,
- Brenden

What would cause a hardrive failure?

We turn on the computer and all it shows it a white screen with a blinking ? in a folder icon. Supposedly this means a hardrive failure? We didn't do anything out of the ordinary with our computer. Any ideas what would have caused this? Possibly a virus?

improper shutdown.
need to choose Recovery partition and repair the directory, if not more.
the Startup Disk control panel setting was "lost" for some reason (zapped PRAM or did an SMC Reset or other).
It could mean lots of things, incl. a bad sector, or bad file system.
You should have some backup sets. Be able to restore and/or reinstall the system.
After using Disk Utility to do Repair Disk, you should try holding Shift key and doing a Safe Boot next time too.

Option Icon 452 is causing a critical failure. Suggestions?

Similar Messages

Maybe you are looking for